Answer:
kinetic energy is the energy an object has beause of it's motion
Answer:
See explanation below
Explanation:
Kinetic energy is energy stored in a moving object.
Please solve this problem!
Answer:
Send a clear photo again
Explanation:
And tag me
If you borrow $12250 and pay $147 in annual interest, the APR on your loan is 1.2% 14.7% 1.23% 7.35%
Answer: 1.2%
Explanation:
Given
If one borrows $12,250
and give $147 interest on it
Then the interest is given from the formula
[tex]\Rightarrow S.I=\dfrac{P\times R\times T}{100}\\\\\Rightarrow 147=\dfrac{12,250\times R\times 1}{100}\\\\\Rightarrow R=\dfrac{147}{122.50}\\\\\Rightarrow R=1.2\%[/tex]
Thus, the annual rate of interest is 1.2%
An investigator collects a sample of a radioactive isotope with an activity of 490,000 Bq.48 hours later, the activity is 110,000 Bq. Part A For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution What is the half-life of the sample?
Answer:
The correct answer is "22.27 hours".
Explanation:
Given that:
Radioactive isotope activity,
= 490,000 Bq
Activity,
= 110,000 Bq
Time,
= 48 hours
As we know,
⇒ [tex]A = A_0 e^{- \lambda t}[/tex]
or,
⇒ [tex]\frac{A}{A_0}=e^{-\lambda t}[/tex]
By taking "ln", we get
⇒ [tex]ln \frac{A}{A_0}=- \lambda t[/tex]
By substituting the values, we get
⇒ [tex]-ln \frac{110000}{490000} = -48 \lambda[/tex]
⇒ [tex]-1.4939=-48 \lambda[/tex]
[tex]\lambda = 0.031122[/tex]
As,
⇒ [tex]\lambda = \frac{ln_2}{\frac{T}{2} }[/tex]
then,
⇒ [tex]\frac{ln_2}{T_ \frac{1}{2} } =0.031122[/tex]
⇒ [tex]T_\frac{1}{2}=\frac{ln_2}{0.031122}[/tex]
[tex]=22.27 \ hours[/tex]
12. What type of lens is pictures below?
Oconverging lens
diverging lens
This is convex lens .
hence It's a converging lens .
The picture shown is a type of converging lens. The correct option is A.
What is a converging lens?A converging lens, also known as a convex lens, is a type of optical lens that is thicker in the middle than at the edges. It is shaped like a curved-outward disc and is commonly used in optical systems such as cameras, telescopes, and microscopes. When light passes through a converging lens, it bends inward and converges at a focal point located on the other side of the lens.
This focal point is determined by the curvature of the lens and its refractive index, which affects how much the light is bent. The distance between the lens and the focal point is called the focal length, and it determines the magnification and the image size produced by the lens. Converging lenses are used in many applications that require focusing and magnifying light, such as correcting vision problems and creating images in photography and microscopy.
Therefore, The correct answer is converging lens.
To learn more about the lens equation click:
https://brainly.com/question/11971432
#SPJ2
turn this scentence to repirted speach.
i ate icecream
She said that..........
Answer:
dhfhffuththt9tr8tujtngigjtjrjrjrurur
Andrea, a 59.0 kg sprinter, starts a race with an acceleration of 3.900 m/s2. If she accelerates at that rate for 12.00 m and then maintains that velocity for the remainder of a 100.00 m dash, what will her time (in s) be for the race
Answer:
her total time taken for the race is 11.58 s
Explanation:
mass of the sprinter, m = 59 kg
acceleration of the sprinter, a = 3.9 m/s²
initial distance covered by the sprinter, d₁ = 12 m
Time taken to cover the first 12 m;
d₁ = ut + ¹/₂at²
where;
u is her initial velocity = 0
d₁ = ¹/₂at²
2d₁ = at²
[tex]t_1 = \sqrt{\frac{2d_1}{a} } \\\\t_1 = \sqrt{\frac{2\times 12}{3.9} }\\\\t_1 = 2.48 \ s[/tex]
The velocity of the sprinter at the end of the 12 m;
v = u + at
v = 0 + at
v = at
v = 3.9 x 2.48
v = 9.67 m/s
The last distance covered by the sprinter at the constant velocity of 9.67 m/s = (100 - 12)m = 88 m
The time taken to cover 88 m with an initial velocity of 9.67 m/s is calculated as;
d₂ = vt + ¹/₂at²
Since the velocity is constant, the acceleration, a = 0
d₂ = vt₂
t₂ = d₂/v
t₂ = 88 / 9.67
t₂ = 9.1 s
The total time taken for the race = t₁ + t₂
= 2.48 s + 9.1 s
= 11.58 s
can some one tell the answers
2.
A rock, mass 4 kg, and a 1 kg stone fall freely from rest from a height of
100 m. After they fall for 2 seconds, the ratio of the rock's speed to the
stone's speed is
Answer:
44.72m/s
Explanation:
use th formula:vf²=vi²at
and then substitute the values
remember the units
If there is no air resistance, the speed of the free falling object from the same height will be the same. Therefore, the ratio of speed of the stone to that of rock for 2 seconds falling will be 1 : 1.
What is free falling ?An object freely falling under the force of gravitation is called the free falling body. Here, the acceleration of the object is the acceleration due to gravity.
For a freely falling body, the velocity v = g t
where g is the acceleration due to gravity and for earth g is 9.8 m/s².
Everybody falls with the same rate freely under the acceleration due to gravity if there is no air resistance at all.
Here, the time t = 2 s
then v = 9.8 m/s² × 2 s = 19.6 m/s.
the speed of both the rock and stone will be 19.6 m/s in the absence of air resistance. Hence, the ratio of their speed is 1 : 1.
Find more on free falling:
https://brainly.com/question/13299152
#SPJ7
The wheels on a skateboard have a diameter of 2.93 inches. If a skateboarder is traveling downhill at 23 miles per hour, determine the angular velocity of the wheels in radians per second.
Answer:
The angular velocity of the wheels is 276.314 radians per second.
Explanation:
The wheels are rolling, which is a combination of rotation and translation, whose center of rotation is the point of contact between the wheel and the ground and the geometrical center of the skateboard experiments pure translation. Then, the angular velocity can be found by using the following kinematic expression:
[tex]\omega = \frac{v}{R}[/tex] (1)
Where:
[tex]\omega[/tex] - Angular velocity, in radians per second.
[tex]v[/tex] - Velocity of the wheel at its center, in inches per second.
[tex]R[/tex] - Radius of the wheel, in inches.
If we know that [tex]v = 404.8\,\frac{in}{s}[/tex] and [tex]R = 1.465\,in[/tex], then the angular velocity of the wheels are:
[tex]\omega = \frac{404.8\,\frac{in}{s} }{1.465\,in}[/tex]
[tex]\omega = 276.314\,\frac{rad}{s}[/tex]
The angular velocity of the wheels is 276.314 radians per second.
which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Answer:
d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
Explanation:
The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.
So, in dc steady state, the voltage across a capacitor is constant and the current zero.
The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.
So, in dc steady state, the voltage across an inductor is zero and the current constant.
So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.
The answer is d.
what is the formula to calculate the speed
Answer:
speed=to distance ÷time , thank me later
Consider a simple pendulum that consists of a massless 2.00-meter length of rope attached to a 5.00-kg mass at one end. What is the period of oscillation for this simple pendulum
Answer:
2.8 seconds
Explanation: Given that a simple pendulum that consists of a massless 2.00-meter length of rope attached to a 5.00-kg mass at one end. What is the period of oscillation for this simple pendulum
The parameters given are :
Length = 2 m
Mass = 5kg
Using the formula below
T = 2 pi × sqrt ( L / g )
Substitute all the parameters into the formula.
T = 2 × 3.143 × sqrt ( 2 / 9.8 )
T = 2 × 3.143 × 0.4517
T = 2.838 s
Therefore, the period of oscillation for this simple pendulum is 2.8 s approximately.
what change occurs to the mass of an object when a unbalanced
Answer:
The mass decreases
Explanation:
Just smart
how can u tell matched forces act on objects?
Answer:If an object's speed changes, or if it changes the direction it's moving in,
then there must be forces acting on it. There is no other way for any of
these things to happen.
Once in a while, there may be a group of forces (two or more) acting on
an object, and the group of forces may turn out to be "balanced". When
that happens, the object's speed will remain constant, and ... if the speed
is not zero ... it will continue moving in a straight line. In that case, it's not
possible to tell by looking at it whether there are any forces acting on it
Give the missing ammeter reading a and b. suggest why more current flow through some bulbs than through others Grade 10 question and Answer
Answer:
becaude of electricity
voltage needed to raise current to 3.75a using 20,20,200 resistor set
Answer: The voltage needed is 35.7 V
Explanation:
Assuming that the resistors are arranged in parallel combination.
For the resistors arranged in parallel combination:
[tex]\frac{1}{R}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}[/tex]
We are given:
[tex]R_1=20\Omega\\R_2=20\Omega\\R_3=200\Omega[/tex]
Using above equation, we get:
[tex]\frac{1}{R}=\frac{1}{20}+\frac{1}{20}+\frac{1}{200}\\\\\frac{1}{R}=\frac{10+10+1}{200}\\\\R=\frac{200}{21}=9.52\Omega[/tex]
Calculating the voltage by using Ohm's law:
[tex]V=IR[/tex] .....(1)
where,
V = voltage applied
I = Current = 3.75 A
R = Resistance = [tex]9.52\Omega[/tex]
Putting values in equation 1, we get:
[tex]V=3.75\times 9.52\\\\V=35.7V[/tex]
Hence, the voltage needed is 35.7 V
There are six different ways to arrange those resistors.
Each way leads to a different answer.
You didn't tell us how you want them connected.
The attached drawing shows them all.
What is the resistance of a 3.5 m copper wire (Rho= 1.7x10-8 Ohm·m) that 1 point
has a cross-sectional area of 5.26x10-6 m2? Use the equation below. *
R=
pl
А
4.1 x 10-3 ohms
1.1 x 10 3 ohms
9.2 x 10-4 ohms
1.1x 10-2 ohms
Answer:
(D)
Explanation:
Given :
l=3.5 m
[tex]A=5.26*10^{-6}[/tex] [tex]m^{2}[/tex]
[tex]p=1.7*10^{-8} ohm.m[/tex]
Resistance can be calculated as :
[tex]R=p\frac{l}{A} \\R=1.7*10^{-8} \frac{3.5}{5.26*10^{-6} }[/tex]
[tex]R=\frac{5.95*10^{-2} }{5.26} \\R=1.13*10^{-2}[/tex]
Resistance of the wire will be 1.1×[tex]10^{-2}[/tex] ohms
Option D is correct
What must be the same for two resistors that are connected in parallel?
Answer:
the voltage will be the same across all resistors
Explanation:
the total voltage supplied to the circuit will remain the same across all resistors
(a) Suppose that a NASCAR race car is moving to the right with a constant velocity of +96 m/s. What is the average acceleration of the car? (b) Twelve seconds later, the car is halfway around the track and traveling in the opposite direction with the same speed. What is the average acceleration of the car?
A rock is pulled back in a slingshot as shown in the diagram below. The elastic on the slingshot is displaced 0.2 meters from its initial position. The rock is pulled back with a force of 10 newtons.
When the rock is released, what is its kinetic energy?
Answer:
id
Explanation:
i don't know
The rock takes 8.16s to return to its release point. Given that the elastic band provides a speed of 40m/s to the rock in 10 cm stretch.
What will be the speed of the rock?Initial speed of the rock, u = 40m/s
Final position of the rock s = 0m taking the release point as reference. The rock takes 8.16s to return to its release point. Given that the elastic band provides a speed of 40m/s to the rock in 10 cm stretch.
Nuclear energy is a useful source of power but has disadvantages. The disadvantage of nuclear energy is it produces dangerous waste.
Initial speed of the rock, u = 40m/s
Final position of the rock s = 0m taking the release point as reference
From the second equation of motion:
solving above we get:
t = 0s or t = 8.16s, t =0 seconds is neglected since it represents the initial position which is the same as the final position at t = 8.16s
So, the rock takes 8.16 seconds to return to the release point.
Therefore, The rock takes 8.16s to return to its release point. Given that the elastic band provides a speed of 40m/s to the rock in 10 cm stretch.
Learn more about speed of rock on:
brainly.com/question/11049671
#SPJ2
Which one will it be
Answer: D
The force decreases inversely proportional to 1/r(squared)
Explanation:
I looked it up im sure this is correct
Answer:
option d
Explanation:
Two objects are attracted to each other by a gravitational force F. ... As the distance r from the center of the planet increases, what happens to the force of gravity on the rocket? The force decreases inversely proportional to 1/r(squared) A spacecraft is orbiting Earth with an orbital radius r.
the force of gravity is represented as
F = GM1M2/r²
now the mass of warth and rocket is considered to be constant and G is a universal constant so it can be said
F is inverse to r²
therefore as the value of r increases that is distance between earth and rocket increases the force decreases
(Follows inverse square law)
9. What part of the eye contains muscles that regulate the amount of light that is allowed to enter the eye?
Answer: the iris
Explanation: I looked it up
Answer:
Iris
Explanation:
Because (iris) has muscles that can expand/contract depends to the amount of light that pupil needs to process/figure out images.
A stone was dropped off a cliff and hit the ground with a speed of 136 ft/s. What is the height of the cliff
Answer:
Explanation:
Use the equation
[tex]v^2=v_0^2+2a[/tex]Δx
In this dimension (the y dimension...the only one we have to care about for this problem), here's what we know:
a = -32 ft/s/s
v₀ = 0 m/s (since someone was holding the stone still before it was dropped)
v = 136 ft/s
Δx = ??
Filling in:
[tex]136^2=0^2+2(-32)[/tex]Δx so
Δx = [tex]\frac{136^2}{2(-32)}[/tex] so
Δx = -289 feet (negative because the stone dropped that many feet below the point from which it was dropped, but you would answer a height question with the positive of this number. If you were asked how far the stone dropped, it would be negative; if you're asked how tall the cliff is, that would be positive)
A uniform copper wire has a resistance of 100 ohms. If the wire is cut into 10 equal lengths, what will be the resistance of each piece
Answer:
Since resistance is proportional to length R = K L / A
the resistance of each piece would be R / 10 = 10 ohms
A copper wire is the conductor wire. If the wire is cut into 10 equal lengths, the resistance of each piece will be 10 ohms.
What is resistance?Resistance is the opposition to the flow of electrons in the conductor wire.
Given is the total resistance of the wire is 100 ohms.
Resistance is directly proportional to the length of the wire. When the wire is cut into 10 pieces, the new resistance will be
[tex]\dfrac{R}{10} =\dfrac{100}{10} =10 \:\rm ohms[/tex]
Hence, the resistance of each piece will be 10 ohms.
Learn more about Resistance.
https://brainly.com/question/11431009
#SPJ2
The position of a particle changes linearly with time, i.e. as one power of t, as given by the following: h(t) = ( 4.1 t + 5.5 ) meters. Find the speed of the particle, in meters per second.
Answer:
v = 4.1 m / s
Explanation:
Velocity is defined by the relation
v =[tex]\frac{dx}{dt}[/tex]
we perform the derivative
v = 4.1 m / s
Another way to find this magnitude is to see that the velocity on the slope of a graph of h vs t
v = [tex]\frac{\Delta x}{\Delta t}[/tex]
Δx = v Δdt + x₀
h= 4.1 t + 5.5
v = 4.1 m / s
x₀ = 5.5 m
after landing aeroplane moment become zero how's?
Answer:
So logically speaking the question you have asked makes no sense
Explanation:
Zero what? After landing where? How what? before asking a question think about how other people will read it.
If the temperature of the conductor is increased, the electrons’ speeds decrease
Answer:
HOPE IT HELPS YOU!!!
Explanation:
Mark FadedGirl25 as brainliest
1. Why does the shape of the lens in your eye change?
To alter the amount of light that enters the eye
to focus the light
to alter the image sent to the brain
Answer:
to focus the link light
Explanation:
Because the lens is flexible and elastic, it can change its curved shape to focus on objects and people that are either nearby or at a distance. ... The ciliary muscles, which are part of the ciliary body, are attached to the lens and contract or release to change the lens shape and curvature.
Answer:
to focus the link light
Explanation:
vote brainliest I never got voted brainliest plssss
The heat capacity of sodium metal is 1500 JK-1, if the mass of the sodium metal is 75 kg, the specific
heat capacity would be
Explanation:
the answer is in the image above
13. How many electrons does a complete third electron shell hold?
Answer:
A) 8A complete third electron shell holds 8 electrons
---------------------------
hope it helps...
have a great day!!
Answer:
8
Explanation:
