determine if each statement is true or false:

graphics designers are responsible for communicating a message: TRUE

portfolios are not important for graphic design careers: FALSE


professional graphic designers join the american institute of graphic arts: TRUE

Answer:

TRUE

FALSE

TRUE

Explanation:

Graphic designers are sometimes known as communications designers. They communicate information through the creation of visuals. This can be in the form of logos, fliers, animations and so many others.

1) Graphic designers are responsible for communicating a message. This is TRUE because this is the top reason for their profession. They communicate messages/ pass information through their designs to the desired audience.

2) Portfolios are not important for graphic design careers. This is FALSE. Having portfolios is necessary for graphic designers. This enables them to have a record of all their work so as to showcase to new clients that may set them up for more jobs.

3) Professional graphic designers join the American Institute of Graphic Arts. This is TRUE. The American Institute for Graphic Arts is a professional organization meant for people in the design industry and this includes graphic designers.

Which line of code will use the overloaded multiplication operation?

class num:
def __init__(self,a):
self.number = a

def __add__(self,b):
return self.number + 2 * b.number

def __mul__(self, b):
return self.number + b.number

def __pow__(self, b):
return self.number + b.number

# main program
numA = num(5)
numB = num(10)

Which line of code will use the overloaded multiplication operation?

class num:
def __init__(self,a):
self.number = a

def __add__(self,b):
return self.number + 2 * b.number

def __mul__(self, b):
return self.number + b.number

def __pow__(self, b):
return self.number + b.number

# main program
numA = num(5)
numB = num(10)

a) product = numA * numB
b) product = numA.multiply(numB)
c) product = numA.mul(numB

Write a MIPS assembly language program that prompts for a user to enter a series of floating point numbers and calls read_float to read in numbers and store them in an array only if the same number is not stored in the array yet. Then the program should display the array content on the console window.
Consult the green sheet and the chapter 3 for assembly instructions for floating point numbers. Here is one instruction that you might use:
c.eq.s $f2, $f4
bc1t Label1
Here if the value in the register $f2 is equals to the value in $f4, it jumps to the Label1. If it should jump when the value in the register $f2 is NOT equals to the value in $f4, then it should be:
c.eq.s $f2, $f4
bc1f Label1
To load a single precision floating point number (instead of lw for an integer), you might use:
l.s $f12, 0($t0)
To store a single precision floating point number (instead of sw for an integer), you might use:
s.s $f12, 0($t0)
To assign a constant floating point number (instead of li for an integer), you might use:
li.s $f12, 123.45
To copy a floating point number from one register to another (instead of move for an integer), you might use:
mov.s $f10, $f12
The following shows the syscall numbers needed for this assignment.
System Call System Call System Call
Number Operation Description
2 print_float $v0 = 2, $f12 = float number to be printed
4 print_string $v0 = 4, $a0 = address of beginning of ASCIIZ string
6 read_float $v0 = 6; user types a float number at keyboard; value is store in $f0
8 read_string $v0 = 8; user types string at keybd; addr of beginning of string is store in $a0; len in $a1
------------------------------------------
C program will ask a user to enter numbers and store them in an array
only if the same number is not in the array yet.
Then it prints out the result array content.
You need to write MIPS assembly code based on the following C code.
-------------------------------------------
void main( )
{
int arraysize = 10;
float array[arraysize];
int i, j, alreadyStored;
float num;
i = 0;
while (i < arraysize)
{
printf("Enter a number:\n");
//read an integer from a user input and store it in num1
scanf("%f", &num);
//check if the number is already stored in the array
alreadyStored = 0;
for (j = 0; j < i; j++)
{
if (array[j] == num)
{
alreadyStored = 1;
}
}
//Only if the same number is not in the array yet
if (alreadyStored == 0)
{
array[i] = num;
i++;
}
}
printf("The array contains the following:\n");
i = 0;
while (i < arraysize)
{
printf("%f\n", array[i]);
i++;
}
return;
}
Here are sample outputs (user input is in bold): -- note that you might get some rounding errors
Enter a number:
3
Enter a number:
54.4
Enter a number:
2
Enter a number:
5
Enter a number:
2
Enter a number:
-4
Enter a number:
5
Enter a number:
76
Enter a number:
-23
Enter a number:
43.53
Enter a number:
-43.53
Enter a number:
43.53
Enter a number:
65.43
The array contains the following:
3.00000000
54.40000153
2.00000000
5.00000000
-4.00000000
76.00000000
-23.00000000
43.52999878
-43.52999878
65.43000031

Which of the following best explains how an analog audio signal is typically represented by a computer?
a. An analog audio signal is measured at regular intervals. Each measurement is stored as a sample, which is represented at the lowest level as a sequence of bits.
b. An analog audio signal is measured as a sequence of operations that describe how the sound can be reproduced. The operations are represented at the lowest level as programming instructions.
c. An analog audio signal is measured as input parameters to a program or procedure. The inputs are represented at the lowest level as a collection of variables.
d. An analog audio signal is measured as text that describes the attributes of the sound. The text is represented at the lowest level as a string.

-1
Draw a flowchart to input two
numbers in variables M and N and
print the multiplication table from 1*1
to M*N​

There used to be a popular type of pulp book for younger readers. They were called "Choose Your Own Adventure" novels. The idea was pretty simple. You'd start reading and then a few pages into the book, there would be a plot development that required a choice. The book might describe that you've entered a spooky house and the door has locked behind you. It would then ask you if you want to try to exit by going through the kitchen or exploring upstairs. If you chose to go into the kitchen, you'd turn to page 200, if you chose to go upstairs, you'd turn to page 43. This would repeat maybe five or six times though the book. You could re-read it a few times and try different outcomes.
In this lab you are going to create a choose your own adventure application using navigation controllers. The introduction screen to your application will contain a few lines of text to set up a story and then leave the user with a choice. Below the text, you will present two buttons that correspond to the different choices.
For example, you might see the following text on the main screen:
You are walking down the street when a tiger runs up and takes your lunch and then runs away...
Do you want to chase the tiger or run away?
Chase
Run Away
The user must then tap one of the buttons. This will move the user to a new screen with a few more lines of the story and another choice and two more buttons. You will create three (3) turning points in your story. This means that your story will have eight (8) different possible outcomes and a total of 15 screens.
Requirements
The story must ask three (3) questions, no matter how the user answers the previous question. All the questions must be different and result in a different story text.
The story must have eight (8) possible different final outcomes.
The story must include a minimum of 15 screens in total.
Create content that is appropriate and not-offensive. We will share these and play them together.
For extra credit you can add an extra screen and use inputs to capture data from the user such as a name, favorite food, or lucky number and use this data in the story.

17. What are the basic modes of operation of 8255?Write the features of mode 0 in 8255?

short note about micro miniaturzation​

list the main industries in Sierra Leone​

Factory Design Pattern Assignment This assignment will give you practice in using the Factory/Abstract Factory Design Pattern. You are going to create a Terraforming program. What does terraform mean

write the C program
The function turn_to_letter decides on the letter grade of the student according to the table below from the visa and final grades sent into it and returns it, write it together with a main function which the turn_to_letter function is called and prints the letter equivalent on the screen. -Success score = 40% of midterm + 60% of final,
-F for the success score below 50, D for between 50 and 59, C for between 60 and 69, B for between 70 and 79, A for 80 and above.

This program exercise #4 wants the user to write a program in python that contains a list of movies titles, years and movie rating. You will need to display a menu option that allows the user to list all of the movies, add a movie, delete a movie and exit out of the program. This will be done using lists and the functions to add an element to a list and how to delete an element to a list. The program should be written utilizing functions in python for the main function, the display_menu function, the delete function, the add function and the list movie function. You can place this all in one python file or include them in various python files that include them into the main program. Let me know if you have any questions with this exercise. Output Screen: COMMAND MENU list - List all movies add - Add a movie del - Delete a movie exit - Exit program Command List: list 1. Monty Python and the Holy Grail, 1979, R 2. On the Waterfront, 1954, PG 3. Cat on a Hot Tim Roof, 1958, R Command: add Name: Gone with the Wind Year: 1939 Rating: PG Gone with the Wind was added.

Create a PetStore class, a Dog class, and Cat class. Once instantiated, a PetStore should be able to take in and give out pets. The store's method for receiving pets should be called receive. This method should take a single pet object (either a Dog or Cat instance) and should add it to the store's inventory of pets. The store's method for giving out a pet should be called sell and can take no arguments. The method returns a pet when called.

You have been given an encrypted copy of the Final exam study guide here, but how do you decrypt and read it???

Along with the encrypted copy, some mysterious person has also given you the following documents:

helloworld.txt -- Maybe this file decrypts to say "Hello world!". Hmmm.

hints.txt -- Seems important.

In a file called pa11.py write a method called decode(inputfile,outputfile). Decode should take two parameters - both of which are strings. The first should be the name of an encoded file (either helloworld.txt or superdupertopsecretstudyguide.txt or yet another file that I might use to test your code). The second should be the name of a file that you will use as an output file. For example:

decode("superDuperTopSecretStudyGuide.txt" , "translatedguide.txt")

Your method should read in the contents of the inputfile and, using the scheme described in the hints.txt file above, decode the hidden message, writing to the outputfile as it goes (or all at once when it is done depending on what you decide to use).

Hint: The penny math lecture is here.

Another hint: Don't forget about while loops...

a) Why is eavesdropping done in a network?
b) Solve the following using checksum and check the data at the
receiver:
01001101
00101000​

Python program
You are given the following text file called Mytext.txt. Write a Python function called search_file that accepts the name of the file (i.e. filename) and a string to look for in the file (i.e. mystring) as parameters. The function then looks for mystring in the file. Whenever it finds the string in a line, it saves the line number and the text for that line in a dictionary. Finally, it returns the dictionary after reading all the lines in the file and populating the dictionary with all matching line numbers and line text. If an empty string or a blank string is passed as mystring then an empty dictionary is returned.
Sample Input: search_file("Mytext.txt","python")
Sample Input: search_file("Mytext.txt","")
Contents of Mytext.txt
Python is an interpreted, high-level, programming language.
Python is dynamically typed and garbage-collected.
Python was conceived in the late 1980s.
Python 2.0, was released in 2000.
Python 3.0, was released in 2008.
The interpreters are available for many operating systems.

3.4 code practice question 2 edhesive

what connect webpages?​

What is the hamming distance between the following bits? Sent
bits: 101100111, Received bits: 100111001
Select one: 5. Or 3 or 6 or4​

Which work habits should you follow to increase work efficiency and avoid health issues?

explain three main steps in mail merging (6 marks) ​

What’s unique about windows 8 compared to earlier windows

what is the best plugin for subscription sites?

is used for finding out about objects, properties and methods​

A decimal number is called a float.
True
False

A line beginning with a # will be transmitted to the programmer’s social media feed.

A.
True

B.
False

You want a cable that could be used as a bus segment for your office network. The cable should also be able to support up to 100 devices. Which cable should you use?

A.
RG-6
B.
RG-8
C.
RG-58U
D.
RG-59

Page Setup options are important for printing a PowerPoint presentation a certain way. The button for the Page Setup dialog box is found in the
File tab.
Home tab.
Design tab.
Slide Show tab.

which shortcut can we use to make directional heading of a cuboid more obvious while in the lidar view​

who would benefit from using self-driving cars

what does this mean on a tamagotchi lol (this is the hello kitty one)