Answer:
[OH⁻] = 4.3 x 10⁻¹¹M in OH⁻ ions.
Explanation:
Assuming the source of the carbonate ion is from a Group IA carbonate salt (e.g.; Na₂CO₃), then 0.115M Na₂CO₃(aq) => 2(0.115)M Na⁺(aq) + 0.115M CO₃²⁻(aq). The 0.115M CO₃²⁻ then reacts with water to give 0.115M carbonic acid; H₂CO₃(aq) in equilibrium with H⁺(aq) and HCO₃⁻(aq) as the 1st ionization step.
Analysis:
H₂CO₃(aq) ⇄ H⁺(aq) + HCO₃⁻(aq); Ka(1) = 4.3 x 10⁻⁷
C(i) 0.115M 0 0
ΔC -x +x +x
C(eq) 0.115M - x x x
≅ 0.115M
Ka(1) = [H⁺(aq)][HCO₃⁻(aq)]/[H₂CO₃(aq)] = [(x)(x)/(0.115)]M = [x²/0.115]M
= 4.3 x 10⁻⁷ => x = [H⁺(aq)]₁ = SqrRt(4.3 x 10⁻⁷ · 0.115)M = 2.32 x 10⁻⁴M in H⁺ ions.
In general, it is assumed that all of the hydronium ion comes from the 1st ionization step as adding 10⁻¹¹ to 10⁻⁷ would be an insignificant change in H⁺ ion concentration. Therefore, using 2.32 x 10⁻⁴M in H⁺ ion concentration, the hydroxide ion concentration is then calculated from
[H⁺][OH⁻] = Kw => [OH⁻] = (1 x 10⁻¹⁴/2.32 x 10⁻⁴)M = 4.3 x 10⁻¹¹M in OH⁻ ions.
________________________________________________________
NOTE: The 2.32 x 10⁻⁴M value for [H⁺] is reasonable for carbonic acid solution with pH ≅ 3.5 - 4.0.
The concentration of hydroxide ion of given solution is 4.3 x 10⁻¹¹M.
How we calculate the [OH⁻]?We can calculate the concentration of hydroxide ions as follow:
[OH⁻][H⁺] = 10⁻¹⁴
Given chemical reaction with ICE table shown as below:
H₂CO₃(aq) ⇄ H⁺(aq) + HCO₃⁻(aq)
Initial: 0.115 0 0
Change: -x +x +x
Equilibrium: 0.115-x +x +x
Given that, Ka = 4.3 x 10⁻⁷
Equilibrium constant for this reaction is written as:
Ka = [H⁺][HCO₃⁻]/[H₂CO₃]
4.3 x 10⁻⁷ = x² / 0.115
x = 2.32 x 10⁻⁴M = [H⁺]
Now we calculate the concentration of hydroxide ion as:
[OH⁻][H⁺] = 10⁻¹⁴
[OH⁻] = 10⁻¹⁴ / 2.32 x 10⁻⁴ = 4.3 x 10⁻¹¹M
Hence, value of [OH⁻] is 4.3 x 10⁻¹¹M.
To know more about pH & pOH, visit the below ink:
https://brainly.com/question/24595796
Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread
Answer:
D. Baking bread
Explanation:
In this process, energy is absorbed and in an endothermic process energy is absorbed too.
Baking bread is an example of an endothermic process, therefore option (d) is correct .
What do you mean by endothermic process ?Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.
An endothermic reaction is accompanied by an absorption of heat.
Endothermic reactions cause a cooling effect by lowering the temperature of the surrounding environment.
A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .
Baking bread is an example of an endothermic process, hence option (d) is correct .
Learn more about endothermic process ,here:
https://brainly.com/question/23184814
#SPJ5
What is the concentration of Htions at a pH = 11?
mol/L
What is the concentration of Htions at a pH = 6?
mol/L
How many fewer Htions are there in a solution at a
pH = 11 than in a solution at a pH = 6?
Based on the following observations decide the order of reactivity for hydrogen, magnesium, and copper. Hydrochloric acid reacts with magnesium but did not react with copper. magnesium reacted with copper sulfate. Write your answers in the blanks. For magnesium write magnesium for hydrochloric acid write hydrogen and for copper sulfate write copper.
Answer:
Mg> H> Cu
Explanation:
We can see from the question that hydrochloric acid reacted with magnesium as follows;
Mg(s) + 2HCl(aq) ----> MgCl2(aq) + H2(g)
Copper does not react with HCl which means that copper is less reactive than hydrogen hence it can not displace hydrogen from a dilute acid solution.
The order of reactivity of the elements then is ; Mg> H> Cu
One of the electron transitions in a hydrogen atom produces infrared light with a wavelength of
8.231 x 10°m. What amount of energy causes this transition?
A transition occurs when an electron absorbs energy and moves from one energy level to another.
Let us recall the formula;
E = hc/λ
h= planks constant = 6.6 * 10^-34 Js
c = speed of light = 3 * 10^8 ms-1
λ = wavelength =
We can see from the question that the exponent in the value for the wavelength was not properly rendered hence we can not be able to substitute values and obtain a numerical answer for the energy of the infrared radiation.
However, if all the values are properly substituted, then the energy of the infrared radiation can conveniently be obtained.
https://brainly.com/question/4177755
Titration of 25.0 mL of an HCl solution of unknown concentration requires 14.8 mL of 0.100 M NaOH. What is the molar concentration of the HCl solution
1. Metallic strontium crystallizes in a face-centered cubic lattice, with one Sr atom per lattice point. If the edge length of the unit cell is found to be 608 pm, what is the metallic radius of Sr in pm?
2. The substance beta manganese is found to crystallize in a cubic lattice, with an edge length of 630.0 pm. If the density of solid beta manganese is 7.297 g/cm3, how many Mn atoms are there per unit cell?
Answer:
[tex]r=215pm[/tex]
[tex]N_{Mn}=20[/tex]
Explanation:
From the question we are told that:
Edge length of the unit cell [tex]l=608pm[/tex]
a)
Generally the equation for The relationship between edge length and radius is mathematically given by
[tex]4r=\sqrt{2a}[/tex]
Therefore
[tex]4r=\sqrt{2*608}[/tex]
[tex]r=\frac{\sqrt{2*608}}{4}[/tex]
[tex]r=215pm[/tex]
b)
From the question we are told that:
Density [tex]\rho=7.297[/tex]
Edge length of [tex]l=630.0 pm=>630*10^-{10}[/tex]
Therefore Volume is given as
[tex]V=l^3[/tex]
[tex]V=630*10^-{10}^3[/tex]
[tex]V=2.50047*10^{−22}[/tex]
Generally the equation for Mass is mathematically given by
[tex]m=Volume*density[/tex]
[tex]m=V*\rho[/tex]
[tex]m=2.50047*10^{−22}*7.297[/tex]
[tex]m=1.83*10^{-21}g[/tex]
Therefore Molarity is given as
[tex]n=\frac{M}{Molar M}[/tex]
[tex]n=\frac{1.83*10^{-21}g}{55}[/tex]
[tex]n=3.32*10^{-23}[/tex]
Finally The atoms in a unit cell is
[tex]N_{Mn}=Moles*Avogadro\ constant[/tex]
[tex]N_{Mn}=3.32*10^{-23}*6.023*10^{23}[/tex]
[tex]N_{Mn}=20[/tex]
Using the following equation for the combustion of octane calculate the heat associated with the formation of 100.0 g of carbon dioxide. The molar mass of octane is 114.33 g/mole.
2C8H18 + 25O2 → 16 CO2 + 18 H2O
ΔH°rxn = -11018 kJ
Answer:
The right solution is "-602.69 KJ heat".
Explanation:
According to the question,
The 100.0 g of carbon dioxide:
= [tex]\frac{100.0 \ g}{114.33\ g/mole}[/tex]
= [tex]0.8747 \ moles[/tex]
We know that 16 moles of [tex]CO_2[/tex] formation associates with -11018 kJ of heat, then
0.8747 moles [tex]CO_2[/tex] formation associates with,
= [tex]-\frac{0.8747}{16}\times 11018 \ KJ \ of \ heat[/tex]
= [tex]-0.0547\times 11018[/tex]
= [tex]-602.69 \ KJ \ heat[/tex]
When the equation,
O2 + __C 10H 22 →
CO2 +
H2O is balanced, the coefficient of O2 is?
Please help!
CH3CH2OH
______ions
in an aqueous solution.
А
forms
B
does not form
Answer:
When ionic compounds dissolve, they break apart into ions which are then able to conduct a current ( conductivity ). ... Many molecular compounds, such as sugar or ethanol, are nonelectrolytes. When these compounds dissolve in water, they do not produce ions.
Explanation:
Ethanol is an organic compound with an alcoholic functional group and is nonelectrolytes. Ethanol (CH₃CH₂OH) does not form ions in an aqueous solution. Thus, option B is correct.
What are nonelectrolytes?Nonelectrolytes are substances that do not dissociate readily to yield ions and also are poor conductors of electricity and heat due to a lack of charged ions.
Ethanol is a nonelectrolyte that does not show conductivity and can be dissolved in water without producing ions. They cannot forms ions upon dissociation as covalent bonds are present.
Instead of ions that have covalent compounds that lack the ability to transfer the electron to conduct the electrical charge. Glucose, ethanol, etc. are some examples of a nonelectrolyte.
Therefore, option B. ethanol does not form ions is the correct blank.
Learn more about nonelectrolytes here:
https://brainly.com/question/14633704
#SPJ2
……….is strong due to the ……………..between positive ions and negative delocalized electrons
Answer:
atom &bond
Explanation:
atom is strong due to the bond
(GIVING BRAINIEST!)
Which of the following compares the rainforest and the tundra environments correctly?
A. A rainforest is hotter than the tundra because it is closer to the equator.
B. A rainforest is less humid than the tundra because of its higher elevation.
C. A tundra has higher temperatures than the rainforest because it receives more
sunshine.
D. A tundra has higher humidity than the rainforest because of its proximity to water bodies.
For Science BTW!
Answer:
A
Explanation:
A rain forest is hotter than the tundra because it is closer to the equator
When equal moles of an acid and a base are mixed, after reaction the two are compounds are said to be at the _______________. Select one: Indicator point Stoichiometric point Equilibrium point End point
Answer:
when equal moles of an acid and base are mixed,after reaction the two are compounds are said to be at the Equivalent point.
A bio catalyst that increases the rate of the reaction without being changed
a) Aluminum oxide. b) Silicon dioxide. c) Enzyme. d) Hydrogen peroxide
43. What is the
than the reaction substrate.
42. A
Explanation:
Enzymes are proteins functioning as catalysts that speed up reactions by lowering the activation energy. A simple and succinct definition of an enzyme is that it is a biological catalyst that accelerates a chemical reaction without altering its equilibrium.
A/An is a type of blood cell that's also called a red blood cell. a) Jeukocyte O b) thrombocyte c) plasma d) erythrocyte
Answer:
option a
Explanation:
pls mark me as brainliest
In practice, the second law of thermodynamics means that:
a. Systems move from ordered behavior to more random behavior.
b. Systems move from random behavior to more ordered behavior.
c. Systems move between ordered and random behavior patterns based on temperature.
d. Systems are constantly striving to reach equilibrium.
Answer:
Systems move from ordered behavior to more random behavior.
Explanation:
Entropy refers to the degree of disorderliness in a system. The second law of thermodynamics can be restated in terms of entropy as follows; “any spontaneous process in any isolated system always results in an increase in the entropy of that system.''(science direct)
According to this law, systems tend towards a more disorderly behaviour (increase in entropy) hence the answer given above.
Could someone please help me out???
Answer:
Time is 2.2 seconds.
Explanation:
Time:
[tex]{ \boxed{ \bf{time = \frac{distance}{speed} }}}[/tex]
Substitute into the formula:
speed = 715 km/h = 198.61 m/s
[tex]{ \tt{time = \frac{435}{198.61} }} \\ { \tt{time = 2.2 \: seconds}}[/tex]
Which of the following events takes place in the Kreb entry phase (acetyl COA from pyruvate)?
A). Only CO2 output
B). NAD is reduced, CO2 is released
C). NADH is oxidized, CO2 is released
D). Only NADH is oxidized
E). Only NAD is reduceed
Answer:
Alphabet C :NADH is oxidized,CO2 is reduced
Determine the total pressure of a mixture that contains 5.25 g of He and 3.25 g of N2 in a 7.75-L flask at a temperature of 27ºC.
Answer:
4.54 atm
Explanation:
Step 1: Calculate the total number of gaseous moles
We will calculate the moles of each gas using its molar mass.
He: 5.25 g × 1 mol/4.00 g = 1.31 mol
N₂: 3.25 g × 1 mol/28.01 g = 0.116 mol
The total number of moles is:
n = 1.31 mol + 0.116 mol = 1.43 mol
Step 2: Convert 27 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 27 + 273.15 = 300 K
Step 3: Calculate the total pressure of the mixture
We will use the ideal gas equation.
P × V = n × R × T
P = n × R × T / V
P = 1.43 mol × (0.0821 atm.L/mol.K) × 300 K / 7.75 L = 4.54 atm
The predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be
A. Inability to metabolize fructose.
B. a lowered yield of ATP production per mole of glucose metabolized.
C. a failure to split fructose bisphosphate into triose phosphates.
D. a failure to resynthesize glucose from lactic acid.
The predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be failure to resynthesize glucose from lactic acid.
WHAT IS FRUCTOSE 1,6-BISPHOSPHATASE:
fructose 1,6-bisphosphatase is an important enzyme produced in the liver to catalyze the conversion of fructose-1,6-bisphosphate to fructose-6-phosphate during gluconeogenesis. Gluconeogenesis is the process whereby glucose sugar is produced from noncarbohydrate substances such as lactate, pyruvate etc. Gluconeogenesis is the opposite of glycolysis (breakdown of glucose).CONSEQUENCES OF DEFICIENCY OF FRUCTOSE 1,6-BISPHOSPHATASE:
Since, gluconeogenesis results in the synthesis of glucose from substances like lactic acid, a deficiency in liver fructose 1,6-bisphosphatase enzyme will mean that GLUCOSE WILL NOT BE ABLE TO BE SYNTHESIZED.Therefore, the predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be failure to resynthesize glucose from lactic acid.
Learn more at: https://brainly.com/question/13717824
Given the equation representing a nuclear reaction in
which X represents a nuclide:
232Th → He + x
Which nuclide is represented by X?
A) 236
B) 228
Ra
SS
C) 236
Ra
92
U
92
D) 228
.
Ss U
The nuclide represented as X is thorium and this is an alpha decay.
The equation shown represents an alpha decay. In an alpha decay, an alpha particle is given off.
The atomic number of the parent nuclide is greater than that of the daughter nuclide by two units while the mass number of the parent is greater than that of the daughter nuclide by four units.
Hence the equation occurs as follows;
[tex]\frac{232}{92} Th ------> \frac{228}{88} Ra + He[/tex]
https://brainly.com/question/14081292
ort
Which is a primary alcohol?
0 3-pentanol
2-propanol
1-ethanol
4-octanol
urvey
Lig A Moving to another question will save this response.
Answer:
1 ethanol is right answer
Explanation:
CH3- CH2-OH
What is the molarity of an HCl solution if 25.0 mL of this solution required 17.80 mL of 0.108 M NaOH to reach the end point in a titration?
Answer:
[tex]\boxed {\boxed {\sf 0.0769 \ M}}[/tex]
Explanation:
We are asked to find the molarity of an acid given the details of a titration experiment. The formula for titration is as follows:
[tex]M_AV_A= M_B V_B[/tex]
In this formula, M is the molarity of the acid or base and V is the volume of the acid or base. The molarity of the hydrochloric acid (HCl) is unknown and the volume is 25.0 milliliters.
[tex]M_A * 25.0 \ mL = M_BV_B[/tex]
The molarity of the sodium hydroxide (NaOH) is 0.108 molar and the volume is 17.80 milliliters.
[tex]M_A * 25.0 \ mL = 0.108 \ M * 17.80 \ mL[/tex]
We are solving for the molarity of the acid and we must isolate the variable [tex]M_A[/tex]. It is being multiplied by 25.0 milliliters. The inverse operation of multiplication is division, so we divide both sides of the equation by 25.0 mL.
[tex]\frac {M_A * 25.0 \ mL }{25.0 \ mL}= \frac{0.108 \ M * 17.80 \ mL }{25.0 \ mL}[/tex]
[tex]M_A= \frac{0.108 \ M * 17.80 \ mL }{25.0 \ mL}[/tex]
The units of milliliters cancel.
[tex]M_A= \frac{0.108 \ M * 17.80 }{25.0 }[/tex]
[tex]M_A= \frac{1.9224}{25.0 } \ M[/tex]
[tex]M_A= 0.076896 \ M[/tex]
The original measurements have 3 and 4 significant figures. We must round our answer to the least number of sig figs, which is 3. For the number we calculated, that is the ten-thousandth place. The 9 to the right of this place tells us to round the 8 up to a 9.
[tex]M_A \approx 0.0769 \ M[/tex]
The molarity of the hydrochloric acid is 0.0769 Molar.
In what areas of the periodic table do you find the most highly reactive elements?
Answer:
The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive.
The most highly reactive elements are typically found at the far left (Group 1) and far right (Group 17) of the periodic table.
Highly reactive elements in the periodic tableGroup 1 elements, also known as alkali metals, are located on the far left of the periodic table. They have one electron in their outermost energy level and are highly reactive due to their tendency to lose that electron to achieve a stable electron configuration. This makes them very reactive with water and other substances.
Group 17 elements, known as halogens, are located on the far right of the periodic table. They have seven electrons in their outermost energy level and are highly reactive due to their strong tendency to gain one electron to achieve a stable electron configuration. This makes them reactive with metals and other elements.
More on the periodic table can be found here: https://brainly.com/question/28747247
#SPJ3
Nitric acid can be formed in two steps from the atmospheric gases nitrogen and oxygen, plus hydrogen prepared by reforming natural gas. In the first step, nitrogen and hydrogen react to form ammonia: N2 (g) + 3H2 (g) â 2NH3 (g) =ÎHâ92.kJ In the second step, ammonia and oxygen react to form nitric acid and water:
NH3 (g) + 2O2 (g) â HNO3 (g) + H2O (g) =ÎHâ330.kJ
Required:
Calculate the net change in enthalpy for the formation of one mole of nitric acid from nitrogen, hydrogen and oxygen from these reactions.
Answer:
-376 kJ
Explanation:
The first step equation:
[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex] ---- (1)
The second step equation:
[tex]\mathsf{NH_{3(g)} + 2O_2{(g)} \to HNO_3{(g)} +H_2O_{(g)} \ \ \ \Delta H = -330\ kJ}[/tex] ---- (2)
To determine the enthalpy of formation for 1 mole of HNO₃ (nitric acid), we have the following.
From the above equations; let multiply equation (1) by 1 and equation (2) by 2.
[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex] ---- (3)
[tex]\mathsf{2NH_{3(g)} + 4O_2{(g)} \to 2HNO_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = 2(-330)\ kJ}[/tex] ----- (4)
adding the above two equations, we have:
[tex]\mathsf{N_{2(g)} + 3H_2{(g)}+ 2NH_{3(g)} + 4O_{2(g)} \to 2HNO_{3(g)} + 2NH_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-660 \ kJ -92\ kJ)}[/tex][tex]\mathsf{N_{2(g)} + 3H_2{(g)} + 4O_{2(g)} \to 2HNO_{3(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-752 \ kJ)}[/tex]
Now, from the recent equation, we have:
2 moles of nitric acid = -752 kJ
∴
1 mole of nitric acid will be: = (1 mole × (-752 kJ)) ÷ 2 moles
1 mole of nitric acid will be: = -376 kJ
What process occurs during the corrosion of iron?
Answers
A.
Iron is oxidized.
B.
Iron is reduced.
C.
Iron (III) is oxidized.
D.
Iron (III) is reduced.
Answer:
A
Explanation:
The iron corrodes so it oxidized
GM 2 all ,What is an atom define it .Good Day
Answer:
An atom is the smallest particle of an element that can take part in chemical reaction.
Explanation:
hope it will help u Amri
Which of the following ligands is not capable of exhibiting linkage isomerism?
a. NCO-
b. -OH
c. -CN
d. -SCN
Answer:
a
...
........
...........
In the reoxidation of QH2 by purified ubiquinone-cytochrome c reductase (Complex III) from heart muscle, the overall stoichiometry of the reaction requires 2 mol of cytochrome c per mole of QH2 because:
Answer: Options related to your question is missing below are the missing options
a. cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor.
b. cytochrome c is a two-electron acceptor, whereas QH2 is a one-electron donor.
c. cytochrome c is water soluble and operates between the inner and outer mitochondrial membranes
d. heart muscle has a high rate of oxidative metabolism, and therefore requires twice as much cytochrome c as QH2 for electron transfer to proceed normally.
e. two molecules of cytochrome c must first combine physically before they are catalytically active.
answer:
cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor. ( A )
Explanation:
The overall stoichiometry of the reaction requires 2 mol of cytochrome per mole of QH2 because a cytochrome is simply a one-electron acceptor while QH2 is not a one-electron donor ( i.e. it is a two-electron donor )
An electron donor in a reaction is considered a reducing agent because it donates its electrons to another compound thereby self oxidizing itself in the process.
calculate the hydrogen ion concentration of a solution who's pH is 2.4
Answer:
I don't know sorry yyyyyyy6yyyyyyyyyyyyyyyyyyyyyyyyyyy
What would be the name of this compound?
Answer:
2,3 Dimethyl hexane
Explanation:
First, start the count from which side is given the CH3 smallest number
first; the longest carbon chain in this compound is 6
and you don't have any double and triple bonds or functional groups so it is Hexane
you start to count from the right side to give the branch molecules the smallest number ..
CH3 = methyl
and you have 2 methyl in this compound ..
and 2 mean you must write ( Di )
you write the name in this way
2,3 Dimethyl hexane
hope this helps you.
stay safe ...
