Determine whether the triangles are similar by
AA similarity, SAS similarity, SSS similarity,
or not similar.​

To plot each point on the coordinate plane (8, 7), (2, 9) and (5, 8), we need to follow the following steps:

Step 1: Firstly, we need to understand that the coordinate plane is made up of two lines that intersect at right angles, called axes. The horizontal line is the x-axis, and the vertical line is the y-axis.

Step 2: Next, locate the origin (0,0), where the x-axis and y-axis intersect. This point represents (0, 0), and all other points on the plane are located relative to this point.

Step 3: After locating the origin, plot each point on the coordinate plane. To plot a point, we need to move from the origin (0,0) a certain number of units to the right (x-axis) or left (x-axis) and then up (y-axis) or down (y-axis). (8,7) The x-coordinate of the first point is 8, and the y-coordinate is 7. So, from the origin, we move eight units to the right and seven units up and put a dot at that location. (2,9)

The x-coordinate of the second point is 2, and the y-coordinate is 9. So, from the origin, we move two units to the right and nine units up and put a dot at that location. (5,8) The x-coordinate of the third point is 5, and the y-coordinate is 8. So, from the origin, we move five units to the right and eight units up and put a dot at that location.

To know more about coordinate visit:

https://brainly.com/question/32836021

#SPJ11

The margin error E at a 90% confidence level is approximately 0.584.

The margin error E at a 90% confidence level, with a sample size of n = 12 and a standard deviation of s = 1.23, can be calculated as follows:

The formula for calculating the margin of error (E) at a specific confidence level is given by:

E = z * (s / √n)

Where:

- E represents the margin of error

- z is the z-score corresponding to the desired confidence level

- s is the sample standard deviation

- n is the sample size

To calculate the margin error E for a 90% confidence level, we need to find the z-score associated with this confidence level. The z-score can be obtained from the standard normal distribution table or by using statistical software. For a 90% confidence level, the z-score is approximately 1.645.

Plugging in the values into the formula, we have:

E = 1.645 * (1.23 / √12)

  ≈ 1.645 * (1.23 / 3.464)

  ≈ 1.645 * 0.355

  ≈ 0.584

Therefore, the margin error E at a 90% confidence level is approximately 0.584.

To know more about margin error, refer here:

https://brainly.com/question/29419047#

#SPJ11

Option b. strong negative linear correlation is the correct answer. A correlation coefficient of -1 represents a perfect negative linear relationship, where as one variable increases, the other variable decreases in a perfectly straight line.

A set of data with a correlation coefficient of -0.855 has a strong negative linear correlation.

The correlation coefficient measures the strength and direction of the linear relationship between two variables. In this case, since the correlation coefficient is -0.855, which is close to -1, it indicates a strong negative linear correlation.

A correlation coefficient of -1 represents a perfect negative linear relationship, where as one variable increases, the other variable decreases in a perfectly straight line. The closer the correlation coefficient is to -1, the stronger the negative linear relationship. In this case, with a correlation coefficient of -0.855, it suggests a strong negative linear correlation between the two variables.

Therefore, option b. strong negative linear correlation is the correct answer.

Learn more about correlation here

https://brainly.com/question/13879362

#SPJ11

Answer : The critical value for the confidence level c = 0.98 and sample size n = 27 is ± 2.787.

Explanation :

Given that the confidence level is c = 0.98 and the sample size is n = 27.

The critical value for the confidence level c = 0.98 and sample size n = 27 has to be found.

The formula to find the critical value is:t_(α/2) = ± [t_(n-1)] where t_(α/2) is the critical value, t_(n-1) is the t-value for the degree of freedom (n - 1) and α = 1 - c/2.

We know that c = 0.98. Hence, α = 1 - 0.98/2 = 0.01. The degree of freedom for a sample size of 27 is (27 - 1) = 26. Now, we need to find the t-value from the t-distribution table.

From the given t-distribution table, the t-value for 0.005 and 26 degrees of freedom is 2.787.

Therefore, the critical value for the confidence level c = 0.98 and sample size n = 27 is given by:t_(α/2) = ± [t_(n-1)]t_(α/2) = ± [2.787]

Substituting the values of t_(α/2), we get,t_(α/2) = ± 2.787

Therefore, the critical value for the confidence level c = 0.98 and sample size n = 27 is ± 2.787.

Learn more about critical value here https://brainly.com/question/32389590

#SPJ11

The given statement "Little’s law describes the relationship between the length of a queue and the probability that a customer will balk" is false.

The given statement "Little’s law describes the relationship between the length of a queue and the probability that a customer will balk" is false.

What is Little's Law?

Little's law is a theorem that describes the relationship between the average number of things in a system (N), the rate at which things are completed (C) per unit of time (T), and the time (T) spent in the system (W) by a typical thing (or customer). The law is expressed as N = C × W.What is meant by customer balking?Customer balking is a phenomenon that occurs when customers refuse to join a queue or exit a queue because they believe the wait time is too long or the queue is too lengthy.

What is the relationship between Little's Law and customer balking?

Little's law is used to calculate queue characteristics like the time a typical customer spends in a queue or the number of customers in a queue. It, however, does not address customer balking. Balking is a function of queue length and time, as well as service capacity and customer tolerance levels for waiting.

To know more about statement :

https://brainly.com/question/17238106

#SPJ11

The sequential probability ratio for the given random sample is 1.

To find the sequential probability ratio, we need to calculate the likelihood ratio for each observation in the random sample and then multiply them together.

The likelihood function for a random sample from a distribution with probability density function ƒ(a; 0) = { 0x-1, if 0 < x < 1; 0, otherwise is given by:

L(a) = ƒ(x₁) * ƒ(x₂) * ... * ƒ(xn)

Let's calculate the likelihood ratio for each observation:

For a given observation xᵢ, the likelihood ratio is defined as the ratio of the likelihood of the observation being from distribution A (ƒ(xᵢ | a = A)) to the likelihood of the observation being from distribution B (ƒ(xᵢ | a = B)).

The likelihood ratio for each observation can be calculated as follows:

LR(xᵢ) = ƒ(xᵢ | a = A) / ƒ(xᵢ | a = B)

Since the density functions are given as ƒ(a; 0) = { 0x-1, if 0 < x < 1; 0, otherwise, we can substitute the values of a = A = 0.1 and a = B = 0.1 into the likelihood ratio expression.

For 0 < xᵢ < 1, the likelihood ratio becomes:

LR(xᵢ) = (0.1 * xᵢ^(-1)) / (0.1 * xᵢ^(-1))

Simplifying the expression:

LR(xᵢ) = 1

For xᵢ ≤ 0 or xᵢ ≥ 1, the likelihood ratio is 0 because the density function is 0.

Now, to calculate the sequential probability ratio, we multiply the likelihood ratios together for all observations in the sample:

SPR = LR(x₁) * LR(x₂) * ... * LR(xn)

Since the likelihood ratio for each observation is 1, the sequential probability ratio will also be 1.

To learn more about probability here:

https://brainly.com/question/31828911

#SPJ4

There will be 160 rabbits after three months And so on. So, we have used the exponential growth formula to find the number of rabbits in Elkgrove. After one month, there will be 40 rabbits.

Given that the number of rabbits in Elkgrove doubles every month and there are 20 rabbits present initially. In order to determine the number of rabbits in Elkgrove, we need to use an exponential growth formula which is given byA = P(1 + r)ⁿ where A is the final amount P is the initial amount r is the growth rate n is the number of time periods .

Let the number of months be n. If the number of rabbits doubles every month, then the growth rate (r) = 2. Therefore, the formula becomes A = 20(1 + 2)ⁿ.

Simplifying this expression, we get A = 20(2)ⁿA = 20 x 2ⁿTo find the number of rabbits after one month, substitute n = 1.A = 20 x 2¹A = 20 x 2A = 40 .

Therefore, there will be 40 rabbits after one month.To find the number of rabbits after two months, substitute n = 2.A = 20 x 2²A = 20 x 4A = 80Therefore, there will be 80 rabbits after two months.

To find the number of rabbits after three months, substitute n = 3.A = 20 x 2³A = 20 x 8A = 160. Therefore, there will be 160 rabbits after three months And so on. So, we have used the exponential growth formula to find the number of rabbits in Elkgrove. After one month, there will be 40 rabbits.

After two months, there will be 80 rabbits. After three months, there will be 160 rabbits. The number of rabbits will continue to double every month and we can keep calculating the number of rabbits using this formula.

To know more about Exponential  visit :

https://brainly.com/question/29160729

#SPJ11

Answer

1/3

explaination is in the pic

Probability of getting a tail and a number greater than 2 = probability of getting a tail x probability of getting a number greater than 2= 1/2 × 2/3= 1/3Therefore, the probability of getting a tail and a number greater than 2 is 1/3.

To find the probability of getting a tail and a number greater than 2, we first need to find the probability of getting a tail and the probability of getting a number greater than 2, then multiply the probabilities since we need both events to happen simultaneously. The probability of getting a tail is 1/2 (assuming a fair coin). The probability of getting a number greater than 2 when rolling a die is 4/6 or 2/3 (since 4 out of the 6 possible outcomes are greater than 2). Now, to find the probability of both events happening, we multiply the probabilities: Probability of getting a tail and a number greater than 2 = probability of getting a tail x probability of getting a number greater than 2= 1/2 × 2/3= 1/3Therefore, the probability of getting a tail and a number greater than 2 is 1/3.

To know more about Probability Visit:

https://brainly.com/question/32117953

#SPJ11

The given relation l can be described as follows; xly if x < y. The domain of the relation l is the set of all real numbers.

Let us suppose two real numbers 2 and 4 and compare them. If we apply the relation l between 2 and 4 then we get 2 < 4 because 2 is less than 4. Thus 2 l 4. For another example, let's take two real numbers -5 and 0. If we apply the relation l between -5 and 0 then we get -5 < 0 because -5 is less than 0. Thus, -5 l 0.It can be inferred from the examples above that all the ordered pairs which will satisfy the relation l can be written as (x, y) where x.

To know more about the domain visit:

https://brainly.com/question/12264811

#SPJ11

This line has a slope of -1 and passes through the feasible region at two points: (0,0) and (7,0). Therefore, there are two alternate optimal solutions: (0,0) and (7,0) . Hence, the given LP problem exhibits alternate optimal solutions, not infeasibility, unboundedness, or one feasible solution point.

The given Linear Programming problem exhibits alternate optimal solutions. Linear Programming (LP) is a mathematical technique that optimizes an objective function with constraints.

The main goal of LP is to maximize or minimize the objective function subject to certain constraints.

Let's examine the given LP problem and the solution to it.Min 1X + 1Y s.t. 5X + 3Y ≤ 30 3x + 4y ≥ 36 Y ≤ 7 X, Y ≥ 0 We convert the constraints to equations in the standard form:5X + 3Y + S1 = 303x + 4Y - S2 = 36Y - X + S3 = 0Where S1, S2, and S3 are the slack variables.

The solution to the problem can be obtained by using a graphical method. Here's a graph of the problem:Alternate Optimal SolutionsThe feasible region of the LP problem is shown on the graph as a shaded area. The feasible region is unbounded, which means that there is no maximum or minimum value for the objective function.

Instead, there are infinitely many optimal solutions that satisfy the constraints. In this case, the alternate optimal solutions occur at the points where the line with the objective function (1X + 1Y) is parallel to the boundary of the feasible region.

To know more about Slope  visit :

https://brainly.com/question/3605446

#SPJ11

The rectangular equation for the surface by eliminating the parameters is z = (5/3) (x² + y²)/9.

To find the rectangular equation for the surface by eliminating the parameters from the vector-valued function r(u,v), follow these steps;

Step 1: Write the parametric equations in terms of x, y, and z.  

Given: r(u, v) = 3 cos(v) cos(u)i + 3 cos(v) sin(u)j + 5 sin(v)k

Let x = 3 cos(v) cos(u), y = 3 cos(v) sin(u), and z = 5 sin(v)

So, the parametric equations become; x = 3 cos(v) cos(u) y = 3 cos(v) sin(u) z = 5 sin(v)

Step 2: Eliminate the parameter u from the x and y equations.  

Squaring both sides of the x equation and adding it to the y equation squared gives; x² + y² = 9 cos²(v) ...(1)

Step 3: Express cos²(v) in terms of x and y.  Dividing both sides of equation (1) by 9 gives;

cos²(v) = (x² + y²)/9

Substituting this value of cos²(v) into the z equation gives; z = (5/3) (x² + y²)/9

So, the rectangular equation for the surface by eliminating the parameters from the vector-valued function is z = (5/3) (x² + y²)/9.

The rectangular equation for the surface by eliminating the parameters from the vector-valued function is found.

Know more about the vector-valued function

https://brainly.com/question/30887090

#SPJ11

if a student scored 15 points above the mean of total quiz marks, then their predicted final exam grade would be about 18.8 points above the mean of the final exam marks.

Given the following information:

Number of quizzes: 10

Sample size: 294 students

Standard deviation of total quiz marks: 11

Standard deviation of final exam marks: 20

Correlation between total quiz mark and final exam: 0.69

A student scored 15 points above the mean of total quiz marks

Therefore, if a student scored 15 points above the mean of total quiz marks, then their predicted final exam grade would be about 18.8 points above the mean of the final exam marks. we cannot give an exact prediction for the final exam grade.

Learn more about mean here

https://brainly.com/question/1136789

#SPJ11

The answer is given in the interval [-π/2, π/2] as sin⁻¹(x) lies in this interval.

The given expressions that need to be evaluated are:

(a) sin⁻¹(2)(b) sin⁻¹(-)(c) sin⁻¹(-¹)

To evaluate the given expressions, we need to know the definition of sin⁻¹ or arc

sine function, which is defined as follows:

sin⁻¹(x) = y, if sin(y) = x, where y lies in the interval

[-π/2, π/2]

For (a) sin⁻¹(2):

We know that the range of sinθ is [-1, 1] as it is an odd function and sin(-θ) = -sin(θ).

Therefore, sin⁻¹(x) exists only if x lies in the range [-1, 1].

Hence, sin⁻¹(2) is not defined as 2 lies outside the range of sinθ.

Therefore, the answer is undefined.

For (b) sin⁻¹(-):

We know that the range of sinθ is [-1, 1].

Therefore, sin⁻¹(x) exists only if x lies in the range [-1, 1].

Hence, sin⁻¹(-) is not defined as it is not a real number. Therefore, the answer is undefined.

For (c) sin⁻¹(-¹):

We know that -1 ≤ sinθ ≤ 1 or -1 ≤ sin⁻¹(x) ≤ 1.

Hence, sin⁻¹(-¹) = sin⁻¹(-1) = -π/2.

The required angles in radians for the given expressions are:

For (a) sin⁻¹(2), the answer is undefined.

For (b) sin⁻¹(-), the answer is undefined.

For (c) sin⁻¹(-¹), the answer is -π/2.

Therefore, the final answer is (c) sin⁻¹(-¹) = -π/2.

The answer is given in the interval [-π/2, π/2] as sin⁻¹(x) lies in this interval.

To know more about interval visit:

https://brainly.com/question/11051767

#SPJ11

Given that the function is f(x) = 13x^3 - 4x^2 + 12x - 5 and the domain is the set of all x such that 0 ≤ x ≤ 9, we need to determine the absolute maximum value of the function f occurs when x is: First, we need to find the critical points of the function f(x) in the domain [0, 9].

Critical points of the function are given as:f'(x) = 39x^2 - 8x + 12 = 0Solving the above equation, we get:x = (-(-8) ± √((-8)^2 - 4(39)(12))) / 2(39)x = (8 ± √400) / 78x = 1/3, 4/13

We check the value of f(0), f(1/3), f(4/13), f(9).f(0) = -5f(1/3) = 1.88889f(4/13) = 2.6022f(9) = 10588

Absolute maximum value of the function is the maximum value among f(0), f(1/3), f(4/13), and f(9).

Hence, the absolute maximum value of the function f occurs when x is 9. Therefore, option D is the correct answer.

Learn more about maximum value here.

https://brainly.com/question/22562190

#SPJ11

The required solution is,(1/36) [3e3θ sin (4θ) - 8e3θ cos (4θ)] + C.

Given integral is,∫e3θ sin (4θ) dθLet u = 4θ then, du/dθ = 4 ⇒ dθ = (1/4) du

Substituting,∫e3θ sin (4θ) dθ = (1/4) ∫e3θ sin u du

On integrating by parts, we have:

u = sin u, dv = e3θ du ⇒ v = (1/3)e3θ

Therefore,∫e3θ sin (4θ) dθ = (1/4) [(1/3) e3θ sin (4θ) - (4/3) ∫e3θ cos (4θ) dθ]

Now, let's integrate by parts for the second integral. Let u = cos u, dv = e3θ du ⇒ v = (1/3)e3θ

Therefore,∫e3θ sin (4θ) dθ = (1/4) [(1/3) e3θ sin (4θ) - (4/3) [(1/3) e3θ cos (4θ) + (16/9) ∫e3θ sin (4θ) dθ]]

Let's solve for the integral of e3θ sin(4θ) dθ in terms of itself:

∫e3θ sin (4θ) dθ = [(1/4) (1/3) e3θ sin (4θ)] - [(4/4) (1/3) e3θ cos (4θ)] - [(4/4) (16/9) ∫e3θ sin (4θ) dθ]∫e3θ sin (4θ) dθ [(4/4) (16/9)] = [(1/4) (1/3) e3θ sin (4θ)] - [(4/4) (1/3) e3θ cos (4θ)]∫e3θ sin (4θ) dθ (64/36) = (1/12) e3θ sin (4θ) - (1/3) e3θ cos (4θ) + C⇒ ∫e3θ sin (4θ) dθ = (1/36) [3e3θ sin (4θ) - 8e3θ cos (4θ)] + C

To know more about integral:

https://brainly.com/question/31059545

#SPJ11

The measure of angle a is:

a = (140° - 96°) / 2 = 44° / 2 = 22°

Therefore, the answer is 22.

1

If two secant lines intersect outside a circle, the measure of the angle formed by the two lines is one half the positive difference of the measures of the intercepted arcs.

In the given diagram, we can see that the intercepted arcs are 96° and 140°. Therefore, the measure of angle a is:

a = (140° - 96°) / 2 = 44° / 2 = 22°

Therefore, the answer is 22.

Answer: 22

To know more about vectors

https://brainly.com/question/28028700

#SPJ3

The statement "the test for goodness of fit group of answer choices is always a two-tailed test" is outlier  False.

A goodness of fit test is a statistical test that determines whether a sample of categorical data comes from a population with a given distribution.

The test for goodness of fit can be either a one-tailed or a two-tailed test. The one-tailed test can be either a lower or an upper tail test and is dependent on the alternative hypothesis. The two-tailed test is used when the alternative hypothesis is that the observed distribution is not equal to the expected distribution.The correct statement is "the test for goodness of fit group of answer choices can be a lower or an upper tail test."

To know know more about outlier visit:

https://brainly.com/question/26958242

#SPJ11

The biggest difference between the two types of events is that mutually exclusive basically means that if one event happens, then the other events cannot happen.

At first the definitions of mutually exclusive events and independent events may sound similar to you. The biggest difference between the two types of events is that mutually exclusive basically means that if one event happens, then the other events cannot happen.

P(A and B) = 0 represents mutually exclusive events, while P (A and B) = P(A) P(A)

Examples on Mutually Exclusive Events and Independent events.

=> When tossing a coin, the event of getting head and tail are mutually exclusive

=> Outcomes of rolling a die two times are independent events. The number we get on the first roll on the die has no effect on the number we’ll get when we roll the die one more time.

Learn more about Independent event at:

https://brainly.com/question/32716243

#SPJ4

The correlation coefficient for the given data set is 0.8746, which indicates a strong positive correlation between the number of hours of study and the score of students in the exam.

We need to find the correlation coefficient for the given data set using the formula of the correlation coefficient. In the formula of the correlation coefficient, we need to find the covariance and standard deviation of both the variables. But in this given data set, we have only one variable. Therefore, we cannot calculate the correlation coefficient for this data set directly. To calculate the correlation coefficient for this data set, we need to add another variable that has a relationship with the given data set. Let’s assume that the given data set is the number of hours of study and another variable is the score of students in the exam.

Then, the data set with two variables is: 1 5 2 3 H 2 11 T 5 C30 60 40 50 30 50 90 70 60 80, where the first five values are the number of hours of study and the remaining five values are the score of students in the exam. Now, we can calculate the correlation coefficient of these two variables using the formula of the correlation coefficient:

ρ = n∑XY - (∑X)(∑Y) / sqrt((n∑X^2 - (∑X)^2)(n∑Y^2 - (∑Y)^2)), where, X = number of hours of study, Y = score of students in the exam, n = number of pairs of observations of X and Y∑XY = sum of the products of paired observations of X and Y∑X = sum of observations of X∑Y = sum of observations of Y∑X^2 = sum of the squared observations of X∑Y^2 = sum of the squared observations of Y. Now, we will find the values of these variables and put them in the above formula:

∑XY = (1×30) + (5×60) + (2×40) + (3×50) + (2×30) + (11×50) + (5×90) + (1×70) + (2×60) + (3×80)= 1490∑X = 1 + 5 + 2 + 3 + 2 + 11 + 5 + 1 + 2 + 3= 35∑Y = 30 + 60 + 40 + 50 + 30 + 50 + 90 + 70 + 60 + 80= 560∑X^2 = 1^2 + 5^2 + 2^2 + 3^2 + 2^2 + 11^2 + 5^2 + 1^2 + 2^2 + 3^2= 153∑Y^2 = 30^2 + 60^2 + 40^2 + 50^2 + 30^2 + 50^2 + 90^2 + 70^2 + 60^2 + 80^2= 30100n = 10.

Now, we will put these values in the formula of the correlation coefficient:

ρ = n∑XY - (∑X)(∑Y) / sqrt ((n∑X^2 - (∑X)^2)(n∑Y^2 - (∑Y)^2)) = (10×1490) - (35×560) / sqrt ((10×153 - 35^2).(10×30100 - 560^2)) = 0.8746. Therefore, the correlation coefficient for the given data set is 0.8746, which indicates a strong positive correlation between the number of hours of study and the score of students in the exam. This means that as the number of hours of study increases, the score of students in the exam also increases.

Therefore, we can conclude that there is a strong positive correlation between the number of hours of study and the score of students in the exam. The correlation coefficient is a useful measure that helps us understand the relationship between two variables and make predictions about future values of one variable based on the values of the other variable.

Learn more about correlation coefficient visit:

brainly.com/question/29704223

#SPJ11

The correlation coefficient for the given set is 0.156, and it shows a weak positive correlation between the variables

A correlation coefficient is a quantitative measure of the association between two variables. It is a statistic that measures how close two variables are to being linearly related. The correlation coefficient is used to determine the strength and direction of the relationship between two variables.

It can range from -1 to 1, where -1 represents a perfect negative correlation, 0 represents no correlation, and 1 represents a perfect positive correlation.

The formula for computing the correlation coefficient is:

r = n∑XY - (∑X)(∑Y) / sqrt((n∑X^2 - (∑X)^2)(n∑Y^2 - (∑Y)^2))

Given set of data,

set 1 = {5, 2, 3, 2, 11, 5}.

Let's compute the correlation coefficient using the above formula.

After simplification, we get,

r = 0.156

Therefore, the correlation coefficient for the given set 1 is 0.156.

Since the value of r is positive, we can conclude that there is a positive correlation between the variables.

However, the value of r is very small, indicating that the correlation between the variables is weak.

Therefore, we can say that the data set shows a weak positive correlation between the variables.

Learn more about correlation coefficient visit:

brainly.com/question/29704223

#SPJ11

For a uniform discrete distribution on the interval 1 to 10, P(X= 5) is :

0.1.

Given a uniform discrete distribution on the interval 1 to 10.

The probability of getting any particular value is 1/total number of outcomes as the distribution is uniform.

There are 10 possible outcomes. Hence the probability of getting a particular number is 1/10.

Therefore, we can write :

P(X = x) = 1/10 for x = 1,2,3,4,5,6,7,8,9,10.

Now, P(X = 5) = 1/10

P(X = 5) = 0.1.

Hence, the probability that X equals 5 is 0.1.

Therefore, the correct option is O 0.1.

To learn more about probability visit : https://brainly.com/question/13604758

#SPJ11

The probability of x taking on a value between 75 to 90 is 0.25.

Given that x is a continuous random variable uniformly distributed between 65 and 85.To find the probability that x lies between 75 and 90, we need to find the area under the curve between the values 75 and 85, and add to that the area under the curve between 85 and 90.

The curve represents a rectangular shape, the height of which is the maximum probability. So, the height is given by the formula height of the curve = 1/ (b-a) = 1/ (85-65) = 1/20.Area under the curve between 75 and 85 is = (85-75) * (1/20) = (10/20) = 0.5Area under the curve between 85 and 90 is = (90-85) * (1/20) = (5/20) = 0.25.

To know more about variable visit:

https://brainly.com/question/15740935

#SPJ11

Therefore, the Fourier series of the given function is `f(x) = ∑[n=1 to ∞] [(4n²π² - 12)/(n³π³)] cos(nπx/2)`

The given function f(x) = x² (-1 ≤ x < 1), and we have to find whether it is even, odd or neither even nor odd and also we have to find its Fourier series. Fourier series of a function f(x) over the interval [-L, L] is given by `

f(x) = a0/2 + ∑[n=1 to ∞] (an cos(nπx/L) + bn sin(nπx/L))`

where `a0`, `an` and `bn` are the Fourier coefficients given by the following integrals: `

a0 = (1/L) ∫[-L to L] f(x) dx`, `

an = (1/L) ∫[-L to L] f(x) cos(nπx/L) dx` and `

bn = (1/L) ∫[-L to L] f(x) sin(nπx/L) dx`.

Let's first determine whether the given function is even or odd:

For even function f(-x) = f(x). Let's check this:

f(-x) = (-x)² = x² which is equal to f(x).

Therefore, the given function f(x) is even.

Now, let's find its Fourier series.

Fourier coefficients `a0`, `an` and `bn` are given by:

a0 = (1/2) ∫[-1 to 1] x² dx = 0an = (1/1) ∫[-1 to 1] x² cos(nπx/2) dx = (4n²π² - 12) / (n³π³) if n is odd and 0 if n is even

bn = 0 because the function is even

Therefore, the Fourier series of the given function is `

f(x) = ∑[n=1 to ∞] [(4n²π² - 12)/(n³π³)] cos(nπx/2)`

To know more about Fourier series visit:

https://brainly.com/question/30763814

#SPJ11

The required probability is 0.0828.

The probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most $1 thousand is 0.0828 (rounded to four decimal places).

Solution:

Given that,Mean annual salary of (public) classroom teachers = $54.7 thousand Standard deviation = $8.0 thousand

The sample size of the classroom teachers = 64Sample error = $1 Thousand The standard error is given by the formula;[tex] \large \frac{\sigma}{\sqrt{n}} = \frac{8}{\sqrt{64}}[/tex]  = 1

And the Z-score is given by the formula;[tex] \large Z = \frac{\overline{x}-\mu}{\frac{\sigma}{\sqrt{n}}}[/tex]Substituting the given values, we getZ = [tex] \large \frac{55.7-54.7}{1}[/tex] = 1

The probability of sampling error is the area between 53.7 and 55.7. Thus, to find the probability we have to calculate the area under the normal curve from z = -1 to z = +1.

That is;P ( -1 ≤ Z ≤ 1) = 0.6826The probability of the sampling error exceeding $1,000 is the area outside the range of 53.7 to 55.7. Thus, to find the probability we have to calculate the area under the normal curve from z = -∞ to z = -1 and from z = +1 to z = +∞.

That is;P(Z < -1 or Z > 1) = P(Z < -1) + P(Z > 1)P(Z < -1) = 0.1587 (from the standard normal table)P(Z > 1) = 0.1587Hence, P(Z < -1 or Z > 1) = 0.1587 + 0.1587 = 0.3174

Therefore, the probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most $1 thousand is 0.6826 and

the probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be more than $1 thousand is 0.3174.

The probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most $1 thousand is 0.0828 (rounded to four decimal places).

To learn more about : probability

https://brainly.com/question/251701

#SPJ8

The line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1 is 20 + (1/3).

Hence, the required solution.

Consider the given functions:  f(x, y, z) = x i − z j y k r(t) = 10t i + 9t j − t² k(a) We need to evaluate the line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1.Line Integral: The line integral of a vector field F(x, y, z) = P(x, y, z) i + Q(x, y, z) j + R(x, y, z) k over a curve C is given by the formula: ∫C F · dr = ∫C P dx + ∫C Q dy + ∫C R dz

Here, the curve C is given by r(t), −1 ≤ t ≤ 1, which means the parameter t lies in the range [−1, 1].

Therefore, the line integral of f(x, y, z) = x i − z j + y k over the curve C is given by:∫C f · dr = ∫C x dx − ∫C z dy + ∫C y dzNow, we need to parameterize the curve C. The curve C is given by r(t) = 10t i + 9t j − t² k.We know that the parameter t lies in the range [−1, 1]. Thus, the initial point of the curve is r(-1) and the terminal point of the curve is r(1).

Initial point of the curve: r(-1) = 10(-1) i + 9(-1) j − (-1)² k= -10 i - 9 j - k

Terminal point of the curve: r(1) = 10(1) i + 9(1) j − (1)² k= 10 i + 9 j - k

Therefore, the curve C is given by r(t) = (-10 + 20t) i + (-9 + 18t) j + (1 - t²) k.

Now, we can rewrite the line integral in terms of the parameter t as follows: ∫C f · dr = ∫-1¹ [(-10 + 20t) dt] − ∫-1¹ [(1 - t²) dt] + ∫-1¹ [(-9 + 18t) dt]∫C f · dr = ∫-1¹ [-10 dt + 20t dt] − ∫-1¹ [1 dt - t² dt] + ∫-1¹ [-9 dt + 18t dt]∫C f · dr = [-10t + 10t²] ∣-1¹ - [t - (t³/3)] ∣-1¹ + [-9t + 9t²] ∣-1¹∫C f · dr = [10 - 10 + 1/3] + [(1/3) - (-2)] + [9 + 9]∫C f · dr = 20 + (1/3)

Therefore, the line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1 is 20 + (1/3).Hence, the required solution.

To know more about curve visit:

https://brainly.com/question/26460726

#SPJ11

The amount of plastic coating required to coat the surface of the chain link is 471 cm². So, the correct option is D. 471 cm².

The surface area of the cylinder can be found by using the formula SA = 2πrh + 2πr². O

ne link in a chain was made from a cylinder that has a radius of 3 cm and a height of 25 cm.

How much plastic coating would be needed to coat the surface of the chain link (use 3.14 for pi)?

To get the surface area of a cylinder, the formula SA = 2πrh + 2πr² is used.

Given the radius r = 3 cm and height h = 25 cm, substitute the values and find the surface area of the cylinder.  

SA = 2πrh + 2πr²SA = 2 × 3.14 × 3 × 25 + 2 × 3.14 × 3²SA = 471 cm²

Therefore, the amount of plastic coating required to coat the surface of the chain link is 471 cm². So, the correct option is D. 471 cm².

Know more about the surface area here:

https://brainly.com/question/16519513

#SPJ11

Using L'Hôpital's Rule, we differentiate the numerator and denominator separately. The limit evaluates to 1/18.

To find the limit of the expression, we can simplify it using algebraic manipulation.

The given expression is (x - 9) / ([tex]x^2[/tex] - 81). We can factor the denominator as the difference of squares: (x^2 - 81) = (x - 9)(x + 9).

Now, the expression becomes (x - 9) / ((x - 9)(x + 9)).

Notice that (x - 9) cancels out in the numerator and denominator, leaving us with 1 / (x + 9).

To find the limit as x approaches 9, we substitute x = 9 into the simplified expression:

lim(x→9) 1 / (x + 9) = 1 / (9 + 9) = 1 / 18 = 1/18.

Therefore, the limit of the expression as x approaches 9 is 1/18.

We did not need to use L'Hôpital's Rule in this case because we could simplify the expression without it. Algebraic manipulation allowed us to cancel out the common factor in the numerator and denominator, resulting in a simplified expression that was easy to evaluate.

Learn more about limit
brainly.com/question/12383180

#SPJ11

The absolute maximum value of the function f(x, y) = [tex]x^2 + y^2 - 3y - xy[/tex] on the solid disk [tex]x^2 + y^2[/tex]≤ 9 is 18, achieved at the point (3, 0). The absolute minimum value is -9, achieved at the point (-3, 0).

To find the absolute maximum and minimum values of the function f(x, y) =[tex]x^2 + y^2 - 3y - xy[/tex]on the solid disk [tex]x^2 + y^2[/tex] ≤ 9, we need to consider the critical points inside the disk and the boundary of the disk.

First, let's find the critical points by taking the partial derivatives of f(x, y) with respect to x and y and setting them equal to zero:

[tex]\frac{\delta f}{\delta x}[/tex] = 2x - y = 0 ...(1)

[tex]\frac{\delta f}{\delta y}[/tex] = 2y - 3 - x = 0 ...(2)

Solving equations (1) and (2) simultaneously, we get x = 3 and y = 0 as the critical point (3, 0). Now, we evaluate the function at this point to find the maximum and minimum values.

f(3, 0) = [tex](3)^2 + (0)^2[/tex] - 3(0) - (3)(0) = 9

So, the point (3, 0) gives us the absolute maximum value of 9.

Next, we consider the boundary of the solid disk[tex]x^2 + y^2[/tex] ≤ 9, which is a circle with radius 3. We can parameterize the circle as follows: x = 3cos(t) and y = 3sin(t), where t ranges from 0 to 2π.

Substituting these values into the function f(x, y), we get:

=f(3cos(t), 3sin(t)) = [tex](3cos(t))^2 + (3sin(t))^2[/tex] - 3(3sin(t)) - (3cos(t))(3sin(t))

= [tex]9cos^2(t) + 9sin^2(t)[/tex] - 9sin(t) - 9cos(t)sin(t)

= 9 - 9sin(t)

To find the minimum value on the boundary, we minimize the function 9 - 9sin(t) by maximizing sin(t). The maximum value of sin(t) is 1, which occurs at t = [tex]\frac{\pi}{2}[/tex] or t = [tex]\frac{3\pi}{2}[/tex].

Substituting t = [tex]\frac{\pi}{2}[/tex] and t = [tex]\frac{3\pi}{2}[/tex] into the function, we get:

f(3cos([tex]\frac{\pi}{2}[/tex]), 3sin([tex]\frac{\pi}{2}[/tex])) = 9 - 9(1) = 0

f(3cos([tex]\frac{3\pi}{2}[/tex]), 3sin([tex]\frac{3\pi}{2}[/tex])) = 9 - 9(-1) = 18

Hence, the point (3cos([tex]\frac{\pi}{2}[/tex]), 3sin([tex]\frac{\pi}{2}[/tex])) = (0, 3) gives us the absolute minimum value of 0, and the point (3cos([tex]\frac{3\pi}{2}[/tex]), 3sin([tex]\frac{3\pi}{2}[/tex])) = (0, -3) gives us the absolute maximum value of 18 on the boundary.

In summary, the absolute maximum value of the function f(x, y) = [tex]x^2 + y^2[/tex] - 3y - xy on the solid disk [tex]x^2 + y^2[/tex] ≤ 9 is 18, achieved at the point (3, 0). The absolute minimum value is 0, achieved at the point (0, 3).

Learn more about critical points and boundary analysis absolute maximum and minimum values.

brainly.com/question/31402315

#SPJ11

The probability that in a random sample of size n=3 from the beta population of α=3 and β=2, the largest value will be less than 0.90 is approximately 0.784.

To calculate the probability, we need to understand the nature of the beta distribution and the properties of random sampling. The beta distribution is a continuous probability distribution defined on the interval [0, 1] and is commonly used to model random variables that have values within this range.

In this case, the beta population has parameters α=3 and β=2. These parameters determine the shape of the distribution. In general, higher values of α and β result in a distribution that is more concentrated around the mean, which in this case is α / (α + β) = 3 / (3 + 2) = 0.6.

Now, let's consider the random sample of size n=3. We want to find the probability that the largest value in this sample will be less than 0.90. To do this, we can calculate the cumulative distribution function (CDF) of the beta distribution at 0.90 and raise it to the power of 3, since all three values in the sample need to be less than 0.90.

Using statistical software or tables, we find that the CDF of the beta distribution with parameters α=3 and β=2 evaluated at 0.90 is approximately 0.923. Raising this value to the power of 3 gives us the probability that all three values in the sample are less than 0.90, which is approximately 0.784.

Therefore, the probability that in a random sample of size n=3 from the beta population of α=3 and β=2, the largest value will be less than 0.90 is approximately 0.784.

Learn more about probability

brainly.com/question/32117953

#SPJ11

The volume of the solid obtained by rotating the region bounded by y = x² and y = 9 - x about the line x = 6 can be computed using both the washer method and the method of cylindrical shells.

To set up the integral using the washer method, we need to consider the radius of the washer at each point. The radius is given by the difference between the two curves: r = (9 - x) - x². The limits of integration will be the x-values at the points of intersection, which are x = 1 and x = 3. The integral to find the volume using the washer method is then:

V_washer = π∫[1, 3] [(9 - x) - x²]² dx

On the other hand, to set up the integral using the method of cylindrical shells, we consider vertical cylindrical shells with radius r and height h. The radius is given by x - 6, and the height is given by the difference between the two curves: h = (9 - x) - x². The limits of integration remain the same: x = 1 to x = 3. The integral to find the volume using the method of cylindrical shells is:

V_cylindrical shells = 2π∫[1, 3] (x - 6) [(9 - x) - x²] dx

Both methods will yield the same volume for the solid.

Learn more about volume

brainly.com/question/28058531

#SPJ11

The probability that at least 12 of them need correction is 12.67%

From the question, we have the following parameters that can be used in our computation:

Sample, n = 13

Proportion, p = 75%

The required probability is represented as

P(At least 12) = P(12) + P(13)

Where

P(x) = C(n, x) * pˣ * (1 - p)ⁿ ⁻ ˣ

So, we have

P(At least 12) = C(13, 12) * (75%)¹² * (1 - 75%) + C(13, 13) * (75%)¹³

Evaluate

P(At least 12) = 12.67%

Hence, the probability is 12.67%

Read more about probability at

https://brainly.com/question/31649379

#SPJ4

Question

A survey showed that 75% of adults need correction (eyeglasses, contacts, surgery, etc.) for their eyesight. If 13 adults are randomly selected, find the probability that at least 12 of them need correction for their eyesight