Answer:
carbon
Explanation:
because it is an allotrope of carbon
Answer:
Carbon
Explanation:
its literaly carbon
What phrase describes a good scientific question?
has a wide focus
addresses a gap in knowledge
does not lead to a testable hypothesis
O has a simple yes or no answer
vious Activity
What is octyne?
O A. An alkane
B. An alkyne
C. A polymer
D. An alkene
SUBMIT
Answer:
B. An alkyne
Explanation:
Octynes are alkynes with one triple bond
Nitrogen dioxide, a major air pollutant, can be produced by the combustion of nitrogen oxide as shown. 2NO + O2 Right arrow. 2NO2 In a plant, 1,500 kg of nitrogen oxide is consumed per day to produce 1,500 kg of nitrogen dioxide per day. What is the percent yield? Use Percent yield equals StartFraction actual yield over theoretical yield EndFraction times 100.. 21.7% 32.6% 43.5% 65.2% Mark this and return Save and Exit Next Submit
Answer:
65.2%
Explanation:
It is given that :
[tex]$2NO + O_2 \rightarrow 2NO_2$[/tex]
Therefore, 60 g of nitrogen oxide will produce 92 g of nitrogen dioxide
or 60 kg of nitrogen oxide will produce 92 kg of nitrogen dioxide
or 1500 kg of nitrogen oxide will produce [tex]2300\ kg[/tex] of nitrogen dioxide
Therefore the percentage yield = (Actual yield / Expected yield) x 100
percentage yield = [tex]$\frac{1500}{2300} \times 100$[/tex]
Percentage yield = 65.217 %
Answer:
the person above me is correct, the answer for this is 65.2% or option D!
Explanation:
thank you person above me! i got a 100% on the test! :D
Can someone please do a True or false for these PLEASE
Answer:
true
false
false
true
false
true
true
false
false
true
true
Which of the following is a base? (3 points)
AgO
Ca(OH)2
HF
NaCl
Answer:
Ca(OH)2 is base
is answer of this question
hope this will help you more
Answer:
Ca(OH)2
Explanation:
Got it right on the test
The weight of an object _____.
a) is always the same
b) depends on its location
c) is not affected by gravity
d) is the same as its mass
Answer:
c
Explanation:
and that's bc it will not share stay the same
.......................
...
....................................
Why are measurements important for science?
Pleaseee help me :( give two reasons why it's important
Answer:
measurements are important to do calculations to get correct results and without them scientists cannot form theories
Which of the following statements about the nucleus is false?
A. Contains nearly all of the mass of the atom.
B. Able to be lost or gained in chemical reactions.
C. None of these
D. Made up of protons and neutrons
Answer:
B. Able to be lost or gained in chemical reactions.
Answer:
B
Explanation:
a chemical reaction would only move the nucleas
Calculate the average atomic mass for element X(please help)
Answer:
Wt Avg At Mass = 39.0229 amu
Explanation:
The Weight Average Atomic Mass in atomic mass units (amu) is the sum of the Weight Average Mass contributions of each isotopic mass. That is,
Wt. Avg. At. Mass (amu) = ∑ Wt. Avg. Contributions of each isotopic mass
Wt. Avg. Contribution = fractional abundance x isotopic mass(amu)
For this problem data:
Isotope %Abundance fractional Isotopic Wt Avg Isotopic
abundance mass(amu) Contribution (amu)
1 9.67% 0.0967 38 3.6746 amu
2 78.68% 0.7868 39 30.6852 amu
3 11.34% 0.1134 40 4.5360 amu
4 0.31% 0.0031 41 0.1271 amu
________________________________________________________
Wt. Avg. Atomic Mass (amu) = ∑ Wt. Avg. Contributions = 39.0229 amu
Calculate the average atomic mass for element X
Answer:
39.02
Explanation:
From the question given above, the following data were obtained:
Isotope A:
Mass of A = 38
Abundance of A (A%) = 9.67%
Isotope B:
Mass of B = 39
Abundance of B (B%) = 78.68%
Isotope C:
Mass of C = 40
Abundance of C (C%) = 11.34%
Isotope D:
Mass of D = 41
Abundance of D (D%) = 0.31%
Average atomic mass of X =?
The average atomic mass of X can be obtained as follow:
Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]
= [(38 × 9.67)/100] + [(39 × 78.68)/100] + [(40 × 11.34)/100] + [(41 × 0.31)/100]
= 3.6746 + 30.6852 + 4.536 + 0.1271
= 30.02
Thus, the average atomic mass of X is 39.02
i need to know soon. HELP
PLEASE
Answer:
D..
carbonate and sulphate
Explain Garri industry
Answer:
In West Africa, garri refers to the creamy granular flour obtained by processing the starchy tuberous roots of freshly harvested cassava. ... Flour foodstuffs mixed with cold or boiled water are a major part of the diet amongst the various ethnicities of Nigeria, Benin Republic, Togo, Ghana, Guinea, Cameroon and Liberia.
Explanation:
Which redox reaction would most likely occur if silver and zinc metal were added to a solution that contained silver and zinc ions?
Answer:
D. Zn²⁺ + 2Ag → Zn + 2Ag⁺
Explanation:
On the reduction potential chart, we have that silver ion Ag⁺ is a stronger oxidizing agent than, zinc, Zn, which is a reducing reducing agent the compared to silver
Therefore, the redox reaction that will occur is that the zinc, Zn, will be oxidized to Zn²⁺ ion, while the silver, Ag²⁺ ion will be reduced to silver deposits Ag, therefore, the zinc will displace the silver in the solution containing silver and zinc ions because zinc is higher than silver in the reactivity series
The reduction potential Zn → Zn²⁺ + 2e⁻ = +0.76
The reduction potential for Ag⁺ + e⁻ → Ag = +0.8
Therefore, given that redox reactions are reversible, we get the following likely redux reaction;
Zn(s) + 2Ag⁺(aq) ⇄ 2Ag(s) + Zn²⁺(aq)
Therefore, from the given options;
Zn²⁺(aq) + 2Ag(s) → Zn(s) + 2Ag⁺(aq) is the reaction most likely to occur.
Solubility of which salts does not dependent on temperature.Any three.
Answer:
any salt
sodium chloride
callcium chloride
potassium chloride
Explanation:
There is no general effect of temperature on the solubility of salts.effect of increase temperature on the solubilty of NaCl is not significant because it is more soluble even at low temperature. The salt like potassium iodide (KI) has negative heat of solution so it's solubility decreases with increase of temperature…
You react 25.0 grams of aluminum with iron (II) chloride. How many grams of iron will you
make? 2A1 + 3FeCl2 --> 2AlCl3 + 3Fe
(PLS HELP ASAP)
Explanation:
hope the picture above helps you to understand:)
What are characteristics of all protests?
Answer:
Explanation:
Una manifestación, protesta o marcha es la exhibición pública de la opinión de un grupo activista (económica, política o social), mediante una congregación en las calles, a menudo en un lugar o una fecha simbólicos y asociados con esa opinión.
Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
Using the diluted solution from the 100-mL volumetric flask, rinse a 1-mL vol. pipet with a few drops and then pipet exactly 1.00-mL into a 50-mL volumetric flask. (Take care not to pipet any solids.) Fill the 50-mL volumetric flask to the mark with acidic FeCl3 solution. Cap and invert to mix the solution. What color is the solution
Answer:
The color of the solution turned a clear brown sort of a copper color
Explanation:
The color of the solution turned a clear brown sort of a copper color.
This is because ASA and the FeCl3 are reacting in a manner that it is resulting in the creation of a metal.
3. If there were multiple products comment on finding the mixture melting point of the products. Does your sample appear to be a mixture or pure
Answer:
If there were multiple products, we can take each product and mixed with a sample of a pure compound that we suspect might be the same as the product. Then, we taking the melting point of this mixture that contains one of our product and pure sample. Then, we can observe the change in melting point, if there is no change in melting point or the melting stays in the same range of the pure compound. Then, the that product along with the pure sample are actually the same compound, not a mixture of two compounds. However, if the melting point for our pure sample compound changed or didn't stay in the same range after the mixing with on of our products. then we can conclude that this product and the pure sample are completely different compound, and indeed they are a mixture.
8. Acetylene is the common name for (a) ethene (b) ethyne (c) propene (d) propyne
Answer:
ethene
Explanation:
The chemical compound acetylene (systematic name: ethyne) has the formula C2H2. It's a hydrocarbon and the most basic alkyne. Because its two carbon atoms are linked together in a triple bond, acetylene is unsaturated as an alkyne.And the ending of acetylene has ene which indicates that it's an alkene .And the ending of acetylene has ene which indicates that it's an alkene.
Answer: i think it is Ethyne
Explanation: because another name for Acetylene is Ethyne which is commonly known
Which natural law do biogeochemical cycles address?
The ground state of an electron is the least stable energy state of an atom
Answer:
electron configuration
Explanation:
The arrangement of electrons in the atomic orbitals of an atom is called the electron configuration. Electron configurations can be determined using a periodic table.
Si un carabinero está controlando velocidad en la carretera y pistolea mi vehículo, está midiendo mi rapidez media
Answer:
Si.
Explicación:
Si un oficial de policía está controlando la velocidad en la carretera y dispara al vehículo con una pistola de radar. El policía mide la velocidad media del coche con esta pistola de radar. Una pistola de radar es un dispositivo que se utiliza para medir la velocidad de los objetos en movimiento que fue inventado por Bryce K. Brown en el año de 1954. La pistola de radar se utiliza con fines policiales para calcular la velocidad de los vehículos en movimiento.
If you were given a mixture that contains rice and sand, can you separate them using filtration method? Why?
Answer:
Yes
Explanation:
A rice and sand combination can be separated using the filtering process.
First, we'll employ filtration, which involves filtering rice grains with sand.
RICE Particles that are heavy and large will stay in place, while light and tiny sand particles will fill in the gaps.
different oil refineries in UAE
Answer:
Petroleum refinery capacity in the UAE 2009-2018
In 2018, the total production capacities of all refineries in the UAE were 1.13 metric barrels per day. Total total production capacity of the al-Ruwais refinery in the United Arab Emirates was approximately 817,000 metric barrels per day.
Write the test for the following Gases.
Co2, H2,Cl2, Br2,
SO2,
NO2,
Answer:
oh no!! I can't do this ;(
Explanation:
oopsie "BrO" I can't do this pleaseee.
don't be selfish next time and maybe people will help you...
Cuando aumenta la temperatura dentro de un recipiente cerrado que contiene un gas este se expande/comprime por que las partículas la forman se alejan/acercan
Tachar lo que no corresponda
Answer:
expande
forman se alejan
Explanation:
Según las leyes de los gases ideales;
La ley de Charles establece que el volumen de una masa dada de gas ideal es directamente proporcional a su temperatura a la presión simultánea.
Esto significa que cuando se calienta una masa dada de gas ideal, el gas se expande y las moléculas de gas se alejan unas de otras de acuerdo con la ley de Charles.
Atoms are:
O A. One of the 4 elements that matter is composed of.
B. Connected by bonds to form compounds.
OC. The basic building blocks of matter.
O D. Heterogeneous and refer to color, texture, and appearance.
Reset Selection
Answer:c
Explanation: atoms make matter
Atoms are the basic building blocks of matter. The correct option is C.
What are atoms?Atoms are the basic unit and building block of matter. They are the smallest unit, but they can be divided. They do not emit charge on dividing into the further, the smallest parts.
Atoms are further divided into electrons, protons, and neutrons. They are the charged particles that revolve in the shell of the atom. A nucleus is also present in the between of the atom.
Atoms are considered the building blocks of matter, as all matter is made up of many atoms. The configuration of the atom defines the state of matter.
Thus, the correct option is C. The basic building blocks of matter.
To learn more about atoms, refer to the link:
https://brainly.com/question/1566330
#SPJ5
 Help ASAP only right answers only no spam don’t answer if you don’t know
