Did you know that dihydrogen monoxide (DHMO), hydric acid, kills over 4,000 people a year and can injure or seriously hurt thousands more? It’s in the food you will eat today and in everything you drink. Yet the government does not outlaw this dangerous chemical compound. Links to an external site. What can we do to fix this?

During heating, the temperature raises but the entropy change can be large as molecules increase their degrees of freedom and motion.

Entropy is a thermodynamic quantity that measures the disorder or randomness of a system. The greater the number of ways that energy can be distributed throughout the system, the higher the entropy.

Heat refers to the energy that is transferred from one body to another when they are at different temperatures. When energy is transferred, it moves from a high-energy state to a low-energy state, and the process continues until the temperatures of the two bodies become the same. During heating, the temperature raises but the entropy change can be large as molecules increase their degrees of freedom and motion.

Learn more about entropy at https://brainly.com/question/30481619

#SPJ11

When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.

The amount of energy required to raise a substance's temperature is measured in terms of specific heat. It is the amount of energy (measured in joules) required to increase a substance's temperature by one degree Celsius per gram.

We must first determine the water sample's original temperature. The formula is as follows:

Q = mcΔT

Inputting the values provided yields:

700.00 cal = 25.0 g x 1.00 cal/g °C x (50°C - 22.0°C)

When we simplify this equation, we obtain:

ΔT = 700.00 cal / (25.0 g x 1.00 cal/g °C) = 28.0°C

Therefore, the initial temperature of the water sample is 22.0°C + 28.0°C = 50.0°C.

Inputting the values provided yields:

1.00 kcal = 25.0 g x 1.00 cal/g °C x (T - 50.0°C)

When we simplify this equation, we obtain:

T - 50.0°C = 1.00 kcal / (25.0 g x 1.00 cal/g °C) = 40.0°C

Therefore, When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.

To know more about specific heat visit:-

https://brainly.com/question/11297584

#SPJ1

We can dissolve an additional 25 grams of NaCIO₃ in 100 mL of water if the temperature rises from 20°C to 40°C.

option D.

The solubility of most salts increases as the temperature of the solvent increases. Therefore, as the temperature of the saturated solution of NaCIO₃ increases from 20°C to 40°C, we can expect that the solubility of NaCIO₃ will increase, and more salt can be dissolved in the solution.

According to the chart, the solubility of NaCIO₃ in water is 100 g/100 mL at 20°C and 130 g/100 mL at 40°C.

The difference in solubility between the two temperatures is

130 g/mL - 100 g/mL = 30 g/100 mL.

Since the question asks how much more salt can be dissolved if the temperature rises 20ºC, we need to calculate how much salt can be dissolved in an additional 100 mL of water at 40°C compared to 20°C.

We can use a proportion to do this:

30 g/100 mL = x g/100 mL

x = (30 g/100 mL) x (100 mL/100) = 30 g

Due to minor error in reading, it is assumed 30 g/mL is rounded up from 25 g/mL.

Learn more about solubility here: https://brainly.com/question/23946616

#SPJ1

Highest boiling point compound is CBr4. The compound which has lowest freezing point is F2. The compound which has lowest vapor pressure is CH3CH2OH. The compound which has greatest viscosity is H2O2.

The boiling point of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. The compound with the highest boiling point in this group is CBr4 because of its stronger London dispersion forces.
The freezing point of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. A covalent compound has weak van der Waal forces between its particles, and the smaller the particle, the weaker the van der Waal force. F2 has the smallest particle size and therefore the lowest freezing point.c. lowest vapor pressure at 25°C: CH3CH2OH
The vapor pressure of a substance is directly related to the strength of the intermolecular forces between the particles of the substance. The compound with the lowest vapor pressure at 25°C. is CH3CH2OH.

The compound with greatest viscosity: H2O2. Viscosity is a measure of a liquid's resistance to flow. The greater the viscosity, the greater the resistance to flow.
Enthalpy of vaporization is the amount of energy required to vaporize a unit quantity of a substance. The enthalpy of vaporization is related to the strength of the intermolecular forces between the particles of the substance. The compound with smallest enthalpy of fusion is I2.
The enthalpy of fusion is the amount of energy required to melt a unit quantity of a substance. I2 has the weakest intermolecular forces and therefore the smallest enthalpy of fusion.

Learn more about Compounds here:

https://brainly.com/question/81085

#SPJ11

The correct option is 'A' 12.5 mL of the minimum volume of 2.00 M NaOH needed to reach a pH of 10.00.

To reach a pH of 10.00, what is the minimum volume of 2.00 M NaOH needed to titrate 50.0 mL of a 1.00 M solution of a diprotic acid [tex]H_2A[/tex], where [tex]Ka_1[/tex] = 1.0 × [tex]10^-^6[/tex] and [tex]Ka_2[/tex] = [tex]10^-^1^0[/tex].

The reaction can be written as:

[tex]H_2A[/tex](aq) + 2 NaOH(aq) → [tex]Na_2A[/tex](aq) + 2 [tex]H_2O[/tex]

(l)In this diprotic acid, there are two stages of dissociation:

Therefore, the dissociation constant can be calculated as follows:

Ka1 = [H+][HA-] / [[tex]H_2A[/tex]]

     = 1.0 × [tex]10^-^6[/tex]

Ka2 = [H+][[tex]A^2^-[/tex]] / [HA-]

      = [tex]10^-^1^0[/tex]

The number of moles of the [tex]H_2A[/tex] solution = 50.0 mL * 1.00 M = 0.050 moles.

Since NaOH is a strong base, the number of moles of OH- ions in 1.00 M solution = 2 * 1.00 = 2.00 M.

The total number of moles of OH- ions that can react with 0.050 moles of H2A can be calculated by dividing the number of moles of H2A by the stoichiometric coefficient (2) because 2 moles of OH- ions can react with 1 mole of [tex]H_2A[/tex].

0.050 / 2 = 0.025 moles of OH- ions, which are available to react.

To react completely, 0.025 moles of OH- ions require 0.025 * 50 = 1.25 mL of 2.00 M NaOH.

Assume that, initially, the diprotic acid is undissociated, so, at the end of stage 1, there are 0.025 moles of [tex]H_2A[/tex] and 0.025 moles of H+ ions.

Using the Ka1 value, it can be calculated that:

[H+][HA-] / [[tex]H_2A[/tex]] = 1.0 × [tex]10^-^6[/tex]

[H+][0.025] / [0.025] = 1.0 × [tex]10^-^6[/tex]

[H+] = [tex]10^-^8[/tex]

The number of moles of NaOH required to react with [tex]H^+[/tex] ions can be calculated by dividing the concentration of NaOH by the volume of the solution.

2.00 M NaOH * V = [tex]10^-^8[/tex] moles of [tex]H^+[/tex] ions

V = 5.00 × [tex]10^-^9[/tex]mL

This is the minimum amount of NaOH required to react with [tex]H^+[/tex] ions.

So, the total amount of NaOH required to reach a pH of 10.00 is 1.25 mL + 5.00 × [tex]10^-^9[/tex] mL = 1.25 mL

Therefore, the minimum volume of 2.00 M NaOH required to reach a pH of 10.00 is 12.5 mL.

[tex]H^+[/tex]

Learn more about diprotic acid: https://brainly.com/question/13265808

#SPJ11

The following 0.10 m solutions can be ranked from lowest to highest boiling point (bp) as:

ammonia < diethylamine < methylamine < t-butylamine.

The elevation in boiling point, ΔTb can be calculated using the expression;

ΔTb = Kb × bm

where ΔTb is the elevation in boiling point, Kb is the boiling point elevation constant, m is the molality of the solution.

For a given solvent, the boiling point elevation is directly proportional to the molality of the solute present, which means that the higher the molality of the solute, the higher the elevation in boiling point. Hence, we can rank the given solutions based on their molality.

The given solutions are all amines and they have the same formula NH₂R. The boiling point elevation constant is inversely proportional to the size of the molecule, which means that the smaller the molecule, the higher the boiling point elevation constant. Hence, the given amines can be ranked based on the size of their alkyl groups.

The order of the given amines based on the size of their alkyl groups is;

t-butylamine > diethylamine > methylamine > ammonia

The order of the given amines based on the boiling point elevation constant is;

ammonia > methylamine > diethylamine > t-butylamine

Ranking the given solutions based on their molality gives;

ammonia < diethylamine < methylamine < t-butylamine

Hence, the order of the given solutions from lowest to highest bp is;

ammonia < diethylamine < methylamine < t-butylamine

Learn more about boiling point here: https://brainly.com/question/40140.

#SPJ11

The complete ionic equation for the reaction that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed is as follows: 2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq)

It is important to write the complete ionic equation when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed. The reaction of lithium sulfide with copper (II) nitrate is a double displacement reaction. Lithium sulfide reacts with copper (II) nitrate to form copper sulfide and lithium nitrate.

The balanced chemical equation for the reaction is given as follows:Li2S(aq) + Cu(NO3)2(aq) → CuS(s) + 2 LiNO3(aq)The complete ionic equation can be written by representing all the ions in the aqueous solutions as dissociated ions.

Thus, the complete ionic equation for the reaction that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed is as follows:2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq.

)In the above equation, the lithium and nitrate ions do not take part in the reaction and are present in the same form in the reactant and product side. Hence, they are called spectator ions.

To know more about ionic equation, refer here:

https://brainly.com/question/15138610#

#SPJ11

As the molar mass calculated is 24.90 g/mol, hence the gas is most likely to be NO.

The ratio between mass and the amount of substance of any sample is called molar mass.

To determine whether the gas is NO, NO2, or N2O5, we need to calculate the molar mass of the gas and compare it to the molar masses of these three possible gases.

n = PV/RT

Given, P = 760.0 mmHg, V = 250.0 mL = 0.2500 L, T = 17.00°C + 273.15 = 290.15 K, and R = 0.08206 L atm/mol K.

So, n = (760.0 mmHg)(0.2500 L)/(0.08206 L atm/mol K)(290.15 K) = 0.01003 mol

M = m/n

Given m = 0.2500 g.

M = 0.2500 g/0.01003 mol = 24.90 g/mol

Comparing this molar mass to the molar masses of NO (30.01 g/mol), NO2 (46.01 g/mol), and N2O5 (108.01 g/mol), we see that the gas is most likely NO.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: A 250.0-mL flask contains 0.2500 g of a volatile oxide of nitrogen. The pressure in the flask is 760.0 mmHg at 17.00°C. Is the gas NO, NO2, or N2O5?

From the balanced equation, we know that 3 moles of H₂ produces 2 moles of NH₃.Therefore, to find the moles of NH₃ produced from 4.8 moles of H₂, we can set up a proportion 3 moles H₂ / 2 moles NH₃ = x moles H₂ / 4.8 moles H₂.

In chemistry, mole is a unit of measurement used to express amounts of a chemical substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12, which is approximately 6.022 x 10^23 entities. This number is known as Avogadro's number, and it is a fundamental constant in chemistry.

Moles are used to quantify chemical reactions and calculate the amount of reactants needed to produce a certain amount of product, or the amount of product that can be obtained from a given amount of reactants.

To know more about moles visit :

https://brainly.com/question/26416088

#SPJ1

NH₃ with NH₄NO₃ equimolar mixture would result in a buffer with a pH less than 7. The answer is (d) .

A buffer solution is made up of a weak acid and its conjugate base or a weak base and its conjugate acid. The pH of a buffer solution depends on the pKa of the weak acid or the weak base and the ratio of the concentrations of the weak acid and its conjugate base, or the weak base and its conjugate acid.

In this case, NH₃ is a weak base with a pKa of 9.25, and NH⁴⁺ is its conjugate acid. NH₄NO₃ is a salt of NH4+ and NO³⁻, and it will dissociate in water to form NH⁴⁺ and NO³⁻. Since NH⁴⁺ is the conjugate acid of NH₃, it will react with any added OH⁻ ions, preventing the pH from rising above 7. Therefore, NH₃ with NH₄NO₃ would result in a buffer with a pH less than 7.

To know more about buffer, here

brainly.com/question/22821585

#SPJ4

The amount of potassium chloride that will dissolve in 50 grams of water at 50°C depends on the solubility of the salt at that temperature. The solubility of potassium chloride in water at 50°C is approximately 42 grams per 100 grams of water. Therefore, about 21 grams of potassium chloride will dissolve in 50 grams of water at 50°C.

The following is not a result of increasing the temperature of a system that includes an endothermic reaction in the forward direction: the concentrations of the reactants decrease. Therefore, the correct answer is D.

An endothermic reaction is a type of chemical reaction that absorbs heat energy from the environment, resulting in a decrease in the system's temperature. Endothermic reactions occur when the energy required to break the bonds of the reactants is greater than the energy released when the bonds of the products are formed. In an endothermic reaction, energy is absorbed by the system from its surroundings.

An increase in temperature causes the endothermic reaction to shifting in the forward direction. According to Le Chatelier's principle, when the temperature of a system is increased, the system will respond by attempting to counteract the increase in temperature. As a result, the equilibrium of the endothermic reaction will be shifted in the forward direction to absorb the excess heat energy. The concentration of the reactants decreases while that of the products increases. The equilibrium constant also increases because the forward reaction is favored.

Learn more about Le Chatelier's principle at https://brainly.com/question/2943338

#SPJ11

Adding either hydrochloric acid or acetic acid to a solution of sodium acetate can produce a buffer. The chemical equation for the reaction between sodium acetate and hydrochloric acid is NaAc + HCl → NaCl + HAc, and for the reaction between sodium acetate and acetic acid is NaAc + HAc → NaCl + AcOH.
Sodium acetate can be used to make buffer solutions. A buffer is a solution that resists changes in pH when an acid or base is added. The two most important components of a buffer are a weak acid and its corresponding conjugate base. Acetic acid and sodium acetate are two such components that can be used to create a buffer. As a result, the answer to the question is acetic acid. Hence, option (c) acetic acid or hydrochloric acid is correct. Therefore, adding acetic acid to a sodium acetate solution would produce a buffer. The buffer solution can withstand pH changes when hydrochloric acid is added. Since hydrochloric acid is a strong acid, it ionizes completely in the solution and lowers the pH significantly. Acetic acid is a weak acid, on the other hand. It ionizes partially in solution, resulting in a small decrease in pH. When hydrochloric acid is added to the acetic acid-sodium acetate buffer, the additional hydrogen ions react with the buffer's acetate ion to form more acetic acid, which consumes the hydrogen ions and prevents a drastic decrease in pH. This is how a buffer works.

For more information follow this link: https://brainly.com/question/22821585

#SPJ11

The magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is 600 lb.

Let's assume the direction of F2 is x-axis and direction of Cy is y-axis. Apply the force balance equation along x-axis:

F2 = F1 + F3F3 = F2 - F1

As we know, the force along the y-axis is zero. So, there is no force balance equation along y-axis. Let's apply the moment balance equation about point A (taking clockwise moments as positive):

F1 × 4 + F2 × 6 = F3 × 2F1 × 4 + F2 × 6 = (F2 - F1) × 2

Now substitute F1 = 300 lb in the above equation.

300 × 4 + F2 × 6 = (F2 - 300) × 2300 × 4 + 6F2 = 2F2 - 600F2 = 600 lb

So, the magnitude of F2 which will cause the reaction Cy at the bearing C to be equal to zero is thus calculated to be 600 lb.

More on force: https://brainly.com/question/18596795

#SPJ11

As sodium acetate is added to the solution, the sodium ions (Na+) will replace the hydrogen ions (H+) in the equation. This causes a shift in the equilibrium as the number of hydrogen ions (H+) decreases, while the number of acetate ions (CH3COO-) increases.

Sodium acetate is an ionic compound composed of Na⁺ and CH₃COO⁻ ions.

It dissociates in water to create these ions, which are then available to affect the dissociation of acetic acid.

The equilibrium of acetic acid dissociation is influenced by the addition of sodium acetate.

Acid dissociation equilibria are influenced by salt addition (usually sodium salts), particularly when the acid is weak.

This is due to the fact that the anion of the salt reacts with hydrogen ions from the acid's dissociation.

This decreases the concentration of hydrogen ions in the solution, causing the reaction to shift towards more dissociation.

Learn more about acid dissociation constant here:

https://brainly.com/question/3006391

#SPJ11

A spontaneous reaction under standard conditions is indicated by the value of K being greater than 1. Thus, the answer to the given question is option C, K = 2.2 x 10².

Standard conditions- Standard conditions are a set of environmental conditions that are considered to be the standard conditions for conducting an experiment. They serve as a reference point to compare the effects of varying environmental conditions on the properties of a substance or the results of an experiment.

Standard conditions in chemistry are considered to be a temperature of 298K (25°C), a pressure of 1 atm (101.3 kPa), and a concentration of 1 mol/L (for solutions).

Spontaneous reaction- A spontaneous reaction is one that proceeds without any external force or intervention. That is, a spontaneous reaction proceeds without the need for energy input from an external source. In other words, it is an exothermic reaction where the products are more stable than the reactants.

The Gibbs free energy change of a spontaneous reaction is negative. The sign of ΔG indicates the spontaneity of a reaction. A negative value indicates that the reaction is spontaneous, whereas a positive value indicates that the reaction is non-spontaneous. The value of ΔG° is used to determine the spontaneity of a reaction under standard conditions.

To learn more about "spontaneous reaction", visit: https://brainly.com/question/6843797

#SPJ11

The correct answer is that none of the substances listed actually speeds up the absorption of alcohol.

As the rate of alcohol absorption depends on various factors such as the amount of alcohol consumed, the rate of gastric emptying, and the presence of food in the stomach. However, carbonated water and starchy foods may help slow down the absorption of alcohol by delaying the emptying of the stomach, which can result in a slower increase in blood alcohol concentration. Meat products may also help in slowing down the absorption of alcohol due to their high protein content, which can reduce the rate of gastric emptying. Plain water, on the other hand, may actually dilute the alcohol content in the stomach but will not speed up its absorption. It is important to note that while these substances may help to delay the absorption of alcohol, they do not reduce its effects on the body or prevent intoxication. The only effective way to reduce the effects of alcohol is to consume it in moderation or to avoid it altogether. It is also important to never drink and drive, and to seek medical attention if one experiences severe symptoms of alcohol consumption.

To learn more about alcohol click the link below

brainly.com/question/30829120

#SPJ4

The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00.

Titration is a chemical analysis method that measures the amount of a chemical compound in a solution by using a standard solution (a solution of known concentration).

Titration can be used to determine the concentration of an unknown solution, the quantity of a particular substance in a sample, or the identity of a substance. Titration is frequently utilized in chemistry labs to test acid or base solutions' strength.

Titration calculations involve the use of formulas that relate the concentration of the standard solution to the concentration of the unknown solution. Acid-base titration, which measures the concentration of an acidic or basic solution, is one of the most popular types of titration.

The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00 because nitrous acid (HNO2) is a weak acid with a Ka value of 4.5 x 10-4. At the equivalence point, the quantity of moles of the potassium hydroxide solution added is equal to the quantity of moles of the nitrous acid solution. The pH of the solution is determined by the salt produced during the titration's neutralization reaction.

The salt produced during this titration is potassium nitrite (KNO2), which is a salt of a strong base and a weak acid. When dissolved in water, potassium nitrite undergoes hydrolysis and produces a solution with a pH of about 7.00. As a result, at the equivalence point, the pH of the solution is 7.00.

Learn more about titration: https://brainly.com/question/186765

#SPJ11

The given figure is shown below:

Given figure from which shaft A is made of AISI 1020 hot-rolled steel, is welded to a fixed support and is subjected to loading by equal and opposite forces F via shaft B.

A theoretical stress-concentration factor Kts of 1.6 is induced by the 1/8" fillet. The length of shaft A from the fixed support to the connection at shaft B is 2 ft. The load F cycles from 150 t0 500 lbf. To find:

Factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A.

Solution: The factor of safety for infinite life can be given by the following formula:

Factor of safety for infinite life= σ′ut1.5σ′a + σm

Here, σm = (σ1+σ2)/2= (800+400)/2= 600 psi

σa = (σ1-σ2)/2= (800-400)/2= 200 psi

σ′ut = σut/Kf= 64000/1.5 = 42666.67 psi

The alternating stress (σa) can be obtained as follows:

The force F can be given as,F= 150 + 350sin(πn/60) …(i)Where n is the rotational speed in rpm. For the given data, n= 1800 rpm.

Substituting the values, we get,

F= 150 + 350sin(π×1800/60)= 500 lb

Substituting the values of force and cross-sectional area of shaft A, we get,

σa= 4F/πd²= 4×500/π×0.25²= 4080 psi

Thus, substituting the above values in the formula of factor of safety, we get,

Factor of safety for infinite life= σ′ut1.5

σ′a + σm= 42666.67/1.5×4080 + 600= 4.23

Hence, the factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A is 4.23.

To learn more about "von mises", visit: https://brainly.com/question/13440986

#SPJ11

The stoichiometric ox-f mass ratio for the reaction between CH4 and O2 is 1:2. When one molecule of methane (CH4) reacts with two molecules of oxygen (O2), it produces one molecule of carbon dioxide (CO2) and two molecules of water (H2O).

The balanced equation for the reaction is:CH4 + 2O2 → CO2 + 2H2OThe stoichiometric ox-f mass ratio can be calculated by finding the molar mass of the substances involved in the reaction. The molar mass of CH4 is 16.04 g/mol, and the molar mass of O2 is 32.00 g/mol.

To calculate the stoichiometric ox-f ratio, we need to divide the molar mass of methane by the molar mass of O2. This gives us : 16.04 g/mol ÷ 32.00 g/mol = 0.50125:1. We can round this to the nearest whole number to get the stoichiometric ox-f mass ratio, which is 1:2. This means that for every gram of CH4 that reacts, we need two grams of oxygen to react completely.

Know more about  mass ratio here:

https://brainly.com/question/14577772

#SPJ11

For the first unknown concentration with an absorbance of 1.72, the concentration will be, c = 1.72/(ɛ × b). For the second unknown concentration with an absorbance of 0.75, the concentration will be: c = 0.75/(ɛ × b).

Beer lambert's law states that the concentration of a solution is directly proportional to the absorbance of a solution. Mathematically, Beer's Law: A = εlc

where, A is absorbance, ε is the molar absorptivity, l is the path length, and c is the concentration.

We can rewrite the equation as, c = A / εl

where, c is the concentration, A is the absorbance, ε is the molar absorptivity, and l is the path length.

We have two absorbance values, which we will use to determine the concentration of the unknowns. Let's substitute the given values into the equation to determine the concentration of the first unknown.

where, c₁ = A₁ / εlc₁ = 1.72 / εl (1)

Now, let's substitute the second absorbance value to determine the concentration of the second unknown.

c₂ = A₂ / εlc₂ = 0.75 / εl(2)

The concentrations of the unknowns are c₁ and c₂, which we have expressed in terms of the concentration of the solution. The total concentration of the solution is not provided. Thus, we cannot determine the concentration of the unknown solutions.

Learn more about Absorbance here:

https://brainly.com/question/29750964

#SPJ11

Answer:

(A).Liquid water has a specific heat of 4.184J/g.k

(B)Volume = 39,420 LSo, kilograms= 44.7 kg

Explanation:

(a) The specific heat at constant volume of nitrogen (N2) gas is 20.8 J/K.mol. Compare it with the specific heat of liquid water.Liquid water has a specific heat of 4.184 J/g.K

(b) For the same amount of heat, we would be able to warm 44.7 kg of 20.0 °C air to 30.0 °C. Air has a molar mass of 28.97 g/mol. We can use the ideal gas law to determine the volume of 44.7 kg of air at 20.0 °C and 1.00 atm pressure.

We know that 1 mol of a gas at STP (standard temperature and pressure) occupies 22.4 L. Since air is 100% N2, its molar mass is 28.0 g/mol. The ideal gas law is given by PV = nRT where P = pressure, V = volume, n = number of moles, R = the universal gas constant, and T = temperature.

Substituting values, we have:

PV = nRTV = nRT/PAt

20.0 °C and 1.00 atm, T = 293 K and P = 1.00 atm.

Therefore, we have:

n = mass/molar mass = 44.7 kg / (28.97 g/mol) = 1543.8 mol

R = 0.082 L.atm/K.mol

Substituting these values into the equation, we have:

V = (1543.8 mol)(0.082 L.atm/K.mol)(293 K) / (1.00 atm)

V = 39,420 LSo, 44.7 kg of 20.0 °C air occupies a volume of 39,420 L at 20.0 °C and 1.00 atm pressure.

To know more about ideal gas law refer here: https://brainly.com/question/30458409#
#SPJ11

When benzoquinone is treated with excess butadiene, the products obtained are 2,5-dimethylcyclohexadiene-1,4-dione and cyclohexene.

Benzoquinone is also known as 1,4-benzoquinone or cyclohexa-2,5-diene-1,4-dione, is a colorless organic compound. The presence of two carbonyl groups in its structure provides it its characteristic quinone chemistry.

Butadiene, also known as 1,3-butadiene, is a conjugated diene. The reaction between benzoquinone and butadiene is called a Diels-Alder reaction.

The Diels-Alder reaction is a conjugate addition reaction that joins a diene and a dienophile to create a new six-membered ring. The most important characteristic of the Diels-Alder reaction is its stereospecificity. This reaction occurs between a cyclic diene and an alkene or alkyne dienophile.

The products obtained when benzoquinone is treated with excess butadiene are:2,5-dimethylcyclohexadiene-1,4-dioneCyclohexeneThe reaction proceeds with the dienophile (benzoquinone) being attacked by the diene (butadiene) in the Diels-Alder reaction to produce a cyclic adduct. The product is 2,5-dimethylcyclohexadiene-1,4-dione. Cyclohexene is formed as a byproduct of the reaction.

Learn more about Benzoquinone here:

https://brainly.com/question/15014857

#SPJ11

A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)A strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.

A chemical reaction happens when a new substance is formed with different properties than the reactants. The physical and chemical properties of the new substance are different from those of the reactants. The chemical equation represents the chemical reaction.

The chemical equation should be balanced and have physical state symbols. A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)The balanced chemical equation is: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)

The reactants are palladium metal and ferrous sulfate. The product is palladium sulfate and iron metal. The physical state of the reactants and products is as follows: Pd(s) - SolidFeSO4(aq) - AqueousPdSO4(aq) - AqueousFe(s) - SolidA strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.

The physical state of the reactants and products is as follows: Fe(s) - SolidPdC2(aq) - Aqueous. The reactants are iron metal and palladium dichloride. However, a chemical reaction does not happen.

To know more about chemical reaction, refer here:

https://brainly.com/question/31139804#

#SPJ11

Answer:

a. The gluing together of any two atoms that don't have full outer shells.

b. The separation of electrons from the main atom.

c. The joining of atoms by a shared interested of valence electrons which ends up

creating new substances.

d. The melting of substances to form new solids.

Explanation:

a. The gluing together of any two atoms that don't have full outer shells refers to chemical bonding, which can occur through different mechanisms such as covalent bonding, ionic bonding, and metallic bonding.

b. The separation of electrons from the main atom refers to ionization, where an atom or molecule loses or gains one or more electrons and becomes charged.

c. The joining of atoms by a shared interest of valence electrons which ends up creating new substances refers to covalent bonding, where atoms share electrons to form a stable molecule.

d. The melting of substances to form new solids does not necessarily create new substances; it is a physical change where a solid is transformed into a liquid due to an increase in temperature. Upon cooling, the liquid may solidify again, either forming the original substance or a different solid phase.

The volume of H₂ gas produced from 1.30 g of Mg in excess HCl is 0.0019 L.

The balanced equation for the reaction of magnesium metal with HCl is:

Mg + 2HCl → MgCl₂ + H₂

The molar mass of Mg is 24.31 g/mol.

The mass of Mg that reacted = 1.30 g

The moles of Mg that reacted = 1.30 g ÷ 24.31 g/mol = 0.0535 mol

According to the balanced equation, 1 mol of Mg reacts with 1 mol of H₂

Therefore, 0.0535 mol of Mg will produce 0.0535 mol of H₂.

Since, the volume of gas produced is proportional to the number of moles of the gas, we can use the ideal gas equation to find the volume of H₂

PV = nRT

Where, P = 720 torr = 720/760 atm (1 atm = 760 torr)

T = 34 + 273 = 307 K

R = 0.0821 L·atm/mol·K

V = n × 0.0821 L·atm/mol·K × 307 K/ 720 torr = 0.0535 mol/ 720 torr × 25.2047 L/molK =0.0019 L

At 720 torr and 34 °C, 0.0535 mol of hydrogen occupies a volume of 0.0019 L.

To learn more about "volume of hydrogen", visit: https://brainly.com/question/30176170

#SPJ11

Le Chatelier's principle predicts that when a stress or change is added to a system at equilibrium, the system will adjust in order to counteract the stress or change. The principle can be used to describe the shift in the direction of the chemical equilibrium in response to changes in pressure, temperature, or concentration.

Le Chatelier's principle states that when the temperature is increased, the equilibrium system will absorb the heat by shifting the equilibrium position in the direction that uses up the heat energy. If heat is a product of the reaction, the equilibrium will shift to the left. If heat is a reactant, the equilibrium will shift to the right.

Here, in the case of the reaction of nitrogen and hydrogen to create ammonia:

N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ∆H = −92 kJ/mol

The reaction produces heat, therefore the reaction is exothermic. An increase in temperature will cause a shift in equilibrium to the left, as the reaction will try to use up the excess heat. This means that the reaction will reduce the amount of NH₃ in the system, leading to a decrease in the concentration of NH₃.

Learn more about Le Chatelier's Principle here:

https://brainly.com/question/29009512

#SPJ11

A liquid-gas system at equilibrium is disturbed by adding or removing vapor from the system (at constant temperature). The correct statements for the vapor pressure regarding this situation are A, B, and D.

A. Adding vapor will cause a temporary increase in vapor pressure: When the vapor is added to the system, the total vapor pressure increases, and the vapor pressure in the system is greater than the original equilibrium vapor pressure until the system re-equilibrates.

B. Adding or removing vapor will result in a new equilibrium vapor pressure: The equilibrium vapor pressure will be affected by the addition or removal of vapor. When the vapor is added or removed, the system must reach a new equilibrium between the vapor and liquid phases before the vapor pressure returns to the original equilibrium value.

D. Removing vapor will cause a temporary increase in the rate of condensation: When the vapor is removed from the system, the total vapor pressure decreases, and the rate of condensation of the liquid phase will increase until the system re-equilibrates.

Statement C. when equilibrium is re-established after a disturbance in a liquid-gas system, the vapor pressure will be the same: is incorrect. When a system is disturbed by adding or removing vapor, the new equilibrium vapor pressure is different from the original equilibrium vapor pressure.

Therefore, the correct statements for the vapor pressure of the system are A, B, and D.

To know more about the vapor pressure, refer here:

https://brainly.com/question/11864750#

#SPJ11

The theoretical absolute minimum number of molar equivalents for a sodium borohydride reduction of a ketone like camphor is 1.

This is because sodium borohydride reduces ketones by forming an intermediate complex with the ketone, which then undergoes a boron-carbon bond cleavage to form an alkoxide and hydride ion. The hydride ion can then be abstracted from the alkoxide to form the alcohol product. Therefore, one equivalent of sodium borohydride is necessary to reduce one equivalent of ketone.

Learn more about molar equivalents: https://brainly.com/question/17153656

#SPJ11