Answer:
Cold blooded animals are those animals that cannot regulate their body temperature and their temperature keeps changing according to their environment. ... Warm blooded animals are the animals that have a constant body temperature and can easily adapt to extreme temperatures as they can regulate their body temperature.
quicklime which is calcium oxide, is made by heathig limestone in a furnace as per the equation :
CaCO3(s)CaO(s)+CO2
7.00Kg of calcium oxide was formed. what mass of calcium carbonate was heated?
Answer:
h2 PRD algo trata gevbjjgcvnkoytewxc.
Answer:
12.5kg
Explanation:
The process is explained in the paper
with respect to air the refractive index of ice is 1.31 and that of rock salt is 1.54 calculate the refractive index of rock salt with respect to ice
Answer:
1.17
Explanation:
Given that,
The refractive index of ice wrt air = 1.31
The refractive index of rock salt wrt air = 1.54
We need to find the refractive index of rock salt with respect to ice.
We know that,
refractive index = (speed of light in air or vaccum)/( speed of light in that medium)
So,
The speed of light in ice = c/(1.31)
The speed of light in rock salt = c/(1.54)
So, the refractive index of rock salt with respect to ice is :
[tex]\mu=\dfrac{1.54}{1.31}\\\\=1.17[/tex]
So, the required refractive index of rock salt wrt ice is 1.17.
Ball X has a mass of 8kg and is moving toward ball Y (which is sitting still) at 2m/s. After they collide, ball X is
sitting still. How fast is ball Y moving after the collision if it has a mass of 4kg?
Answer:
v = 4 m/s
Explanation:
Given :
Ball X :
Mass, m1 = 8kg ;
Initial Velocity, u1 = 2 m/s
Final velocity, v1 = 0
Ball Y:
Mass, m2 = 4kg ;
Initial Velocity, u2 = 0 m/s
Final velocity, v2 = v
(m1u1 + m2u2) = (m2v2 + m1v1)
(8*2 + 4*0) = (4*v + 4*0)
16 + 0 = 4v + 0
16 = 4v
v = 16 / 4
v = 4 m/s
Answer:
Explanation:
This is the Law of Momentum Conservation which for us looks like this:
[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:
[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and
16 + 0 = 0 + 4.0v and
16 = 4.0v so
v = 4.0 in the direction of ball X
A 4.88 x 10-6 C charge moves 265 m/s
parallel (at 0°) to a magnetic field of
0.0579 T. What is the magnetic force
on the charge?
Answer:
[tex]F=0N[/tex]
Explanation:
From the question we are told that:
Charge [tex]Q=4.88 x 10-6 C[/tex]
Velocity [tex]v= 265m/s[/tex]
Angle [tex]\theta =0 \textdegree[/tex]
Magnetic field [tex]B=0.0579T[/tex]
Generally the equation for Force is mathematically given by
[tex]F=Q(\=v*\=B)[/tex]
[tex]F=qvBsin\theta[/tex]
Therefore
[tex]F=qvBsin0 \textdegree[/tex]
[tex]F=0N[/tex]
Answer:
0 newtons
Explanation:
When a moving charge is parallel to the magnetic field, it feels no Magnetic force at all.
Even if the Magnetic Field is 100,000,000 Tesla!
When playing a game of disc golf, each throw to your target is considered to be a O Point O Stroke O Hit O Toss
Answer:
an o point i think
Explanation:
trong chân không có 2 điện tích điểm q1=3.10^-6C và q2=-6.10^-6C đặt tại A và B tương ứng cách nhau 100cm. Tính lực điện thành phần và tổng hợp do q1, q2 tác dụng lên q0=5.10^-6C đặt tại M
Answer:
ya bestie Anda benar terima kasih nanti sekarang selamat tinggal
I need to know how to do it
Answer:
1.76km
Explanation:
Here,
1mi = 1.6km
1.10 miles = 1.6 x 1.10 km
= 1.76 km
Match the following. Column A 1. Torque 2. Centre of gravity 3. Plumb line Column B A. Line of centre of gravity B. Maximum constant velocity C. Not in motion D. Point of action of weight E. Turning effect of force F. Study of forces 4. Terminal velocity 5. Statics
Answer:
1. Torque → F. Study of forces
2. C.O.G → D. Point of action of weight.
3. Plumb line → A. Line of C.O.G
In an experiment Rahul burnt 4 kg fuel and the heat produced was measured to be 160,000 kJ and Raj burnt 2 kg of fuel and heat produced was measured to be 100,000kJ. Calculate the net calorific value of the fuels.
Answer:
The net calorific value of the fuel 1 is 40000 kilojoules per kilogram.
The net calorific value of the fuel 2 is 50000 kilojoules per kilogram.
Explanation:
The net calorific value is equal to the heat produced ([tex]Q[/tex]), in kilojoules, divided by the mass of the burnt fuel ([tex]m[/tex]). We proceed to calculate the net calorific value of each fuel:
Fuel 1 ([tex]m = 4\,kg[/tex], [tex]Q = 160000\,kJ[/tex])
[tex]L = \frac{160000\,kJ}{4\,kg}[/tex]
[tex]L = 40000\,\frac{kJ}{kg}[/tex]
The net calorific value of the fuel 1 is 40000 kilojoules per kilogram.
Fuel 2 ([tex]m = 2\,kg[/tex], [tex]Q = 100000\,kJ[/tex])
[tex]L = \frac{100000\,kJ}{2\,kg}[/tex]
[tex]L = 50000\,\frac{kJ}{kg}[/tex]
The net calorific value of the fuel 2 is 50000 kilojoules per kilogram.
What are various systems of unit?
Answer:
hlw its jess bregoli
your answer is here
SI (International System of Units) (meter-kilogram-second-ampere-kelvin-mole-candela)
FPS (foot-pound-second)
MKS (meter-kilogram-second)
CGS (centimeter-gram-second)
EMU (Electromagnetic) (centimeter-gram-second-abampere)
ESU (Electrostatic) (centimeter-gram-second-abcoulomb)
Atomic (bohr-electron mass-atomic second-electron)
MTS (meter-tonne-second)
Explanation:
hope it may help you !!
Answer:
there are 4 types of systems. They are ,
SI - accepted world wide
MKS - meter kilogram second
CGS - centimeter gram second
FPS - foot pound second
hope it helps.
What is measurement ?
Answer:
Measurement is the quantification of attributes of an object or event, which can be used to compare with other objects or events
Answer:
The comparison of an unknown quantity with a known quantity is called measurement
A particular solid is an excellent conductor of thermal energy. Is it more likely to be a metal or a non-metal?
Explain hydraulic machine as force multiplier.
Answer:
The pressure on piston 1 is always equal to the pressure on piston 2. ... It is equal to the force on piston 1, multiplied by A2/A1. Hydraulic systems are called force multipliers for exactly this reason. A small force can be increased by using hydraulics
Explanation:
Radhe Radhe❤
How many players are allowed to play for one team during a game of
5 points
Netball?
Answer:
Netball is a ball sport for two teams of seven players it's rules are published in print and online by the international netball federation Games are played on a rectangular court divided into thirds with a raised goal at coach short end
Explanation:
It will help you
Explain the energy transformations that occur when breaking in a hybrid
vehicle.
it occur kinetic energy
when breaking in a hybrid
vehicle.
hope it helps
Answer:
it occur kinetic energy when breaking in a hybrid
vehicle .
hope it is helpful to you ☺️
gia tốc a và vận tốc v cùng chiều khi nào trong một chu kì dao động điều hòa ?
Explanation:
Khi một hạt thực hiện SHM Đang chuyển động từ vị trí cực biên về vị trí trung bình, thì vận tốc và gia tốc cùng hướng, tức là hướng về vị trí trung bình
A small block is attached to a spring with a spring constant of 85 N/m. When the spring is compressed 0.30 meters and the released, the 0.50 kg block is launched. What is the final speed of the block?
A)
8.42 m/s
B)
3.91 m/s
C)
7.14 m/s
D)
15.3 m/s
Answer:
Explanation:
These Hooke's Law problems are tricky. Here's what we need to know that clears up the problem entirely. The final and also the max speed of the block will be reached at the point where the potential energy of the system is 0. So the equation we need, namely,
[tex]KE+PE=\frac{1}{2}kA^2[/tex] can be simplified down to
[tex]KE=\frac{1}{2}kA^2[/tex] and we solve this first for KE:
[tex]KE=\frac{1}{2}(85)(.30)^2[/tex] and, paying NO attention whatsoever to significant digits here (because if you did the answer you get is not one of the choices)
KE = 3.825 J. Now we can use that value of kinetic energy and solve for the speed we need:
[tex]KE=\frac{1}{2}mv^2[/tex] so
[tex]3.825=\frac{1}{2}(.50)v^2[/tex] so
[tex]v=\sqrt{\frac{2(3.825)}{.50} }[/tex] so
v = 3.91 m/s
Please answer this question sqdancefan
Answer:
(D) 4
Explanation:
The percentage error in each of the contributors to the calculation is 1%. The maximum error in the calculation is approximately the sum of the errors of each contributor, multiplied by the number of times it is a factor in the calculation.
density = mass/volume
density = mass/(π(radius^2)(length))
So, mass and length are each a factor once, and radius is a factor twice. Then the total percentage error is approximately 1% +1% +2×1% = 4%.
_____
If you look at the maximum and minimum density, you find they are ...
{0.0611718, 0.0662668} g/(mm²·cm)
The ratio of the maximum value to the mean of these values is about 1.03998. So, the maximum is 3.998% higher than the "nominal" density.
The error is about 4%.
_____
Additional comment
If you work through the details of the math, you will see that the above-described sum of error percentages is just an approximation. If you need a more exact error estimate, it is best to work with the ranges of the numbers involved, and/or their distributions.
Using numbers with uniformly distributed errors will give different results than with normally distributed errors. When such distributions are involved, you need to carefully define what you mean by a maximum error. (By definition, normal distributions extend to infinity in both directions.) While the central limit theorem tends to apply, the actual shape of the error distribution may not be precisely normal.
Answer:
D. 4Explanation:
#CARRYONLEARNING
justoko2
if escape velocity and orbital velocity of a satellite for Orbit close to the Earth's surface then these are related by
Answer:
The ratio of the escape velocity to the orbital velocity is [tex]\sqrt 2[/tex].
Explanation:
The minimum velocity given to an object so that it escapes from the earth's gravitational pull is called escape velocity.
The formula of the escape velocity is
[tex]v=\sqrt\frac{2GM}{R}[/tex]
The velocity of an object in the orbit around the earth is called orbital velocity.
The formula of the orbital velocity is
[tex]v=\sqrt\frac{GM}{R}[/tex]
The ratio of the escape velocity to the orbital velocity is
[tex]\frac{v_e}{v_o}=\sqrt 2[/tex]
a current of 12 A flows through a fan for 30 minutes.How many charge flows through then fan during this time?
Answer:
Q=21600C
Explanation:
Q=It.
Data
I=12A
t=30min
convert time from minutes to second
t=60*30
=1800s
Q=?
Q=It
=(12A)*(1800s)
Q=21600C
state the principle of quantization of charge
Answer:
Charge quantization is the principle that the charge of any object is an integer multiple of the elementary charge
Answer: Charge quantization is the principle that the charge of any object is an integer multiple of the elementary charge. Thus, an object's charge can be exactly 0 e, or exactly 1 e, −1 e, 2 e, etc., but not, say, 12 e, or −3.8 e
Explanation:
What is 3.75 x 10^-7?
Answer:
Explanation:
3.75 * 10^-7
=3.75 * 1/10^7
=3.75/10000000
=3/800000000
any base which has it's power negative do it's reciprocal then the power will be positive.
A radio has a 1.3 A current. If it has a resistance of 35 Ω, what is the potential difference?
Answer:
22
Explanation:
Answer:
45.5 v
Explanation:
I = 1.3 A
R = 35 Ω
V = I * R
V = 1.3 * 35 = 45.5 v
what is the formula to calculate liquid pressure?/
1. set up the equation
2. multiply the variables
3. analyze your results
unequal length of day and night
Rotation or Revolution
The density of oil is 0.8 g/cm^3. What is the mass of 36 cm^3 of oil?
Answer:
Refer to the attachment!~
7.) A neutral atom loses two electrons. Which of the following ions might result? HELP ME ASAP!!!
Answer:
A. Mg+2
Explanation:
im not sure, but since it lost two electrons which have a negative charge it gained two charge.
If each metal is hit with light at the minimum wavelength, can I vary the intensity of the light to start emitting electrons? Yes or no? Explain
Answer:
Consequently the statement is FALSE
Explanation:
The process of emission of electrons or photoelectric effect, was explained by Einstein, assuming that light behaves as formed by how many so-called photons and each one of them collides with an electron, therefore to start an electron the incident photon energy must be greater than the work function of the material.
E =K + Ф
By mentioning the intensity we increase the number of photons but we do not increase their energy.
Consequently the statement is FALSE
Match the reactants with the products. zinc sulfate + copper aluminum chloride + copper copper oxide copper + water copper sulfate + oxygen
Answer:
The Reactants Products
Copper sulfate + zinc → Zinc sulfate + copper
aluminum + copper chloride → Aluminum chloride + Copper
Copper + Oxygen → Copper oxide
Explanation:
The Reactants Products
Copper sulfate + zinc Zinc sulfate + copper
aluminum + copper chloride Aluminum chloride + Copper
Copper + Oxygen Copper oxide
First reaction can be described as a single replacement reaction
Second reaction is also a single replacement reaction just like the first reaction
The third is a synthesis reaction ( i.e. reaction in which elements combine to form single compound )
Questlon 20 of 20 Which change to an object would quadruple its kinetic energy?
A. Reducing its mass to one-half of its original value
B. Increasing its velocitato twice its original value
C. Reducing its velocity to one-half of its original value O
D. Increasing its mass to twice its original value
Answer:Whenever the velocity of the object increases or usually doubles, the kinetic energy will be quadrupled. If in case you are not familiar with kinetic energy, this is known as the type of energy that is in motion. The greater the mass of the object, the greater the total of the energy
Explanation:
Change to an object would quadruple its kinetic energy Increasing its velocity to twice its original value
What is kinetic energy?
In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes. The same amount of work is done by the body when decelerating from its current speed to a state of rest. Formally, kinetic energy is any term in a system's Lagrangian which includes a derivative concerning time.
In classical mechanics, the kinetic energy of a non-rotating object of mass m traveling at a speed v is [tex]{\textstyle {\frac {1}{2}}mv^{2}}[/tex]
In relativistic mechanics, this is a good approximation only when v is much less than the speed of light.
The standard unit of kinetic energy is the joule, while the English unit of kinetic energy is the foot-pound.
Learn more about kinetic energy
https://brainly.com/question/12337396
#SPJ2
