disregarding friction, how far will the cart move in 3.2 s, starting from rest? answer in units of m.

(a) The normal force is 267.7 N and frictional force is 980 N.

(b) The minimum coefficient of static friction is 0.27, which is needed to prevent slipping at the base.

(c) The direction of the contact force is 1016 N.

∈(t) = 0

N₂ ( L sinθ ) = 800 ( [tex]\frac{L}{3}[/tex] cosθ )

N₂ = 267.7 N

(a) Normal force F(d) = N₂ = 267.7 N

Frictional force N = 800 + 180

                         N = 980 N

(b) The minimum coefficient of static friction,

F(d) = μ N₁

μ = F / N₁

μ = 267.7 / 980

μ = 0.27

(c) The direction of the contact force,

R = [tex]\sqrt{(980)^{2} + (267.7)^{2} }[/tex]

R = 1016 N

To learn more about Coefficient of static friction, Here :

https://brainly.com/question/24173409?referrer=searchResults

#SPJ4

Answer:

5 m

Explanation:

Displacement is the straight-line distance from the starting point to the end point.  Student ends up 4m north and 3m west from where he started. Use pythagorean theorem to solve for displacement (d).  

d² = 3² + 4² = 25

d = [tex]\sqrt{25}[/tex] = 5 m

Or, if you remember from geometry, a right triangle with legs of 3 and 4 has a hypotenuse of 5 (3-4-5 right triangle)

The second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.

To determine the location of the second weight that will keep the meter stick balanced, we need to consider the principles of equilibrium.

The weight of the meter stick can be calculated as follows:

Weight of meter stick = mass * acceleration due to gravity

= 24 g * 9.8 m/s^2

= 235.2 N

The total weight of the two hanging weights is 96 g + 96 g = 192 g = 1.92 N.

The sum of the forces acting on the meter stick is equal to zero when:

235.2 N + 1.92 N = 0

This equation tells us that the sum of the forces acting on the meter stick is equal to zero when the total weight of the two hanging weights is equal to the weight of the meter stick.

To determine the location of the second weight, we also need to consider the moments about the pivot point. The moment of a force is calculated as the product of the force and the distance from the pivot point. The moments about the pivot point are equal to zero when the sum of the moments of the forces on one side of the pivot point is equal to the sum of the moments of the forces on the other side of the pivot point.

The moment of the weight of the meter stick about the pivot point is calculated as follows:

Moment of the weight of meter stick = force * distance from pivot point

= 235.2 N * 0.4 m

= 94.08 N*m

The moment of the weight hanging from the 9 cm mark about the pivot point is calculated as follows:

Moment of weight hanging from 9 cm mark = force * distance from pivot point

= 1.92 N * 0.09 m

= 0.1728 N*m

To keep the meter stick balanced, the moment of the second weight must be equal in magnitude but opposite in direction to the moment of the weight hanging from the 9 cm mark. The moment of the second weight can be calculated as follows:

Moment of second weight = force * distance from pivot point

= 1.92 N * distance from pivot point

Substituting the value of the force and setting the moment equal to the negative of the moment of the weight hanging from the 9 cm mark, we get the following equation:

1.92 N * distance from pivot point = -0.1728 N*m

Solving for the distance from the pivot point, we find that the second weight must be located at a distance of 0.09 m from the pivot point, or 9 cm. This is the same distance from the pivot point as the weight hanging from the 9 cm mark.

Therefore, the second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.

Learn more about Mass here:

https://brainly.com/question/19385703

#SPJ4

Let us find first the forces at 1, 2 & 3 points.

We know that ke= 8.99 * 109N.m2 / C2

The forces are: -

F1 = keq1q2 / r212 = {8.99 * 109N.m2 / C2} * {10 * 10-6 C} * {40 * 10-6 C} / {10 * 10-2 m}2

F1 = 359.6 N

F2 =keq1q3 / r213 = {8.99 * 109N.m2 / C2} * {10 * 10-6 C} * {30 * 10-6 C} / {30 * 10-2 m}2

F2 = 29.96 N

F3 = keq2q3 / r213 = {8.99 * 109N.m2 / C2} * {40 * 10-6 C} * {30 * 10-6 C} / {20 * 10-2 m}2

F3 = 269.7 N

Now,

The net force on q1 is F1 – F2,

i.e. F1 + F2 = 359.6 + 29.96

F(q1) = 389.56 N to the left

To learn more about Coulomb’s Law:

https://brainly.com/question/66110

#SPJ1

The required values are a) T = 2.3 seconds, b)  f = 0.434 Hz, c) ω = 2.7 rd/s.

Simple harmonic motion, a particular kind of periodic motion in which a particle repeatedly oscillates around a mean location, In U-tube oscillating liquid column motion is hence simple harmonic.

Given,

Time = 11.5 seconds to five complete vibrations.

a) Time period is time taken to complete one vibration,

So T = 11.5/5 = 2.3 seconds

b) Frequency(f) = 1/T

f = 1/2.3 = 0.434 second inverse.

c) By using formula of angular frequency ω = 2π/T

ω = 2π/2.3 = 2.7 hz

Thus, final values are a) T = 2.3 seconds, b)  f = 0.434 second inverse, c) ω = 2.7 rd/s.

To know more about simple harmonic motion visit:

brainly.com/question/28208332

#SPJ4

Newton's third law states that any action will have a(n) equal and opposite reaction.

The system that is more energy efficient is system A because it makes use of electricity to produce more results.

Energy efficiency is the use of less energy to perform the same task or produce the same result.

Energy-efficient homes and buildings use less energy to heat, cool, and run appliances and electronics, and energy-efficient manufacturing facilities use less energy to produce goods.

Energy efficiency has the following benefits:

According to this question, the following applies:

Based on the above explanation, it can be observed that system A is more energy efficient because it uses the same electricity to achieve more.

Learn more about energy efficiency at: https://brainly.com/question/28939461

#SPJ1

An average tendon can withstand 16000 per square inch of force (psi). The Achilles tendon may begin to fail at a force of F = 1280 pounds.

That meaning of the term "force" is obvious. At this point, it is quite acceptable to refer to a force as a push or possibly a pull. An item does not "have energy in it" or "encompass energy." A force is applied to one thing by another. A factor is anything that affects non-living things as well.

Inertia is what holds the cosmos together. Literally. That could prevent matter from having the electric forces necessary to produce its system layout. Vibrating particles generate heat and rotational motion, which operate to counteract inertia.

Area of tendon 0.4×0.2

=0.08 square inch.

0.08 square inch tendon =16000×0.08

F =1280 pound.

To know more about force visit:

https://brainly.com/question/14853868

#SPJ1

The force that must be exerted on the master cylinder of the hydraulic lift to support the weight of car is  147.2 N .

The Pascal's Law states that the relation between the pressure , force and area is given as :

Pressure = Force/Area ;

given that the diameter of the master cylinder is = 1.93 cm ;

so radius of master cylinder = 1.93/2 = 0.965 cm = 0.00965 m ;

the diameter of slave cylinder is = 24.9 cm ;

the radius of the slave cylinder = 24.9/2 = 12.45 m = 0.1245 m ;

Area of slave cylinder (A₁)= π(0.1245)² = 0.0486 m²

Area of the master cylinder (A₂) =  π(0.00965)² = 0.000292 m² ;

given mass of the car = 2500 Kg ,

the force exerted will be : F = m*a

F₁ = 2500*9.8 = 24500 N ;

F₁/A₁ = F₂/A₂

So , 24500/0.0486 = F₂/0.000292

F₂ = (24500/0.0486)×0.000292

F₂ = 147.2 N

Therefore , the force exerted on the master cylinder is 147.2 N  .

Learn more about Force here

https://brainly.com/question/14114564

#SPJ4

4.71 s long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot.

The average position of an object's weight is known as its center of gravity. Any object's travel through space may be entirely explained in terms of how its gravitational center moves from one location to another and, if it is free to spin, how it rotates around that center of gravity. Calculations combining gravitation and dynamics may be made much simpler by treating an object's mass as though it were concentrated at a single location.

T=2π√(l/g)

T=2π√(5.53/9.81)

T=4.71

T =4.71 s

To know more about center of gravity visit:

https://brainly.com/question/20662235

#SPJ4

You did look at solar activity on the heliophysics event registry website, and we found activity on the sun on the specified day.

Any natural occurrence in the upper atmosphere of the sun is referred to as a solar phenomenon. Solar flares, prominences and filaments, and coronal mass ejections are three different categories of solar phenomena.

The simplest way we can investigate how solar activity changes over time is to survey sunspots, which is also how we track the solar cycle. Sunspots are associated with the Sun's natural 11-year cycle, during which the planet's surface changes from calm to turbulent.

To know more about  solar activity visit:-

https://brainly.com/question/3013261

#SPJ4

The work done by the dog is 0.81J.

Work done is a measure of energy expended in moving an object; most commonly calculated by multiplying the force by the distance.

It is said that no work is done if the object does not move.

The work done on an object is the amount of energy transferred to an object through work.

According to this question, a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. The force applied to break the bone must be calculated first as follows:

Force = mass × acceleration

Force = 0.75kg × 9.8m/s²

Force = 7.35N

Work done = 7.35N × 0.11m = 0.81J

Therefore, 0.81J is the work done by the dog.

Learn more about work done at: https://brainly.com/question/2750803

#SPJ1

True. The Big Bang Theory is the current scientific explanation for the origin and evolution of the universe. According to this theory, the universe was initially in a state of extremely high density and temperature, and it has been expanding and cooling since its inception.

One reason we cannot directly observe the Big Bang is that the universe's density was so low at that time that there were no solid particles, such as atoms or molecules, that could have formed into stars or galaxies. Instead, the universe was filled with a hot, ionized plasma that was too diffuse to be observed by telescopes. Another reason is that the expansion of the universe has caused the light and other electromagnetic radiation that was emitted during the Big Bang to become redshifted, or stretched out in wavelength, over time. This means that the light from the earliest moments of the universe has shifted into the microwave and radio frequency ranges, which are not visible to the human eye. Therefore, while we can infer some details about the conditions of the early universe based on observations of the cosmic microwave background radiation and the large-scale structure of the universe, we cannot directly observe the Big Bang itself.

To know more about redshift

https://brainly.com/question/13494718

#SPJ4

The Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex] for a system of 2 springs with spring constant k1 and k2.

The term "spring constant" refers to the proportional constant k. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length.

Spring constants are available in plural (physics) a quality of a spring that is determined by the force acting on the spring to the displacement it produces.

K stands for the proportionality constant, commonly referred to as the "spring constant." In layman's words, stiffness and strength are shown by the k variable in Hooke's law (F = -kx). An item requires more force to be stretched to a specific length the greater the value of k.

Let the force actiong be F N

then , if k1 is the spring constant of spring 1

F = x1 * k1

or, x1 = F/k1.

Similarly for spring 2

x2 = F/k2

Now x1 + x2 = F (1/k1 + 1/k2)

or effective displacement

X= [tex]F(\frac{1}{k1} + \frac{1}{k2} )[/tex]

or, F = [tex]X * (\frac{k1k2}{k1 + k2} )[/tex]

So the Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex].

To learn more about spring refer to :

https://brainly.com/question/14973217

#SPJ4

When a soap bubble 100 nm thick and illuminated by white light incident perpendicular to its surface, then wavelength, λ is calculated =  5.32 *10^-7 m.

The ratio of the speed of light in a vacuum, c, to the speed of light in a medium, c' is called as index of refraction. One of the consequence of this difference in speed is that when light goes from one medium to another at an angle, then the propagation vector in the new medium has a different angle with respect to normal.

Given, t= 100nm= 100 * 10 ^-9  n= 1.33

ΔФ1 = λ/4

ΔФ2 = 2√2 t λ n/2 λ

=2 t n

=2 * 100 * 10 ^-9 * 1.33

= 2.66 *10^-7

2.66 *10^-7= λ/2

λ=  5.32 *10^-7 m.

To know more about index of refraction, refer

https://brainly.com/question/12469161

#SPJ4

parallel processing perceiving the color, motion, and form of a bird in flight illustrates.

Option a is correct.

According to the trichromatic theory, our ability to perceive red, green, and blue hues as well as how they affect our cerebral activity are both explained by cones (Like a projection T.V.). Consequently, the precise colour we see is determined by the proportion of each colour to the others.

The three kinds of cone receptors that are responsible for colour vision are the foundation of the trichromatic hypothesis of colour vision. Beginning in the 18th century, this hypothesis has a very long history.

To know more about parallel processing visit:-

https://brainly.com/question/29235758

#SPJ4

The star Sirius is indeed brighter but our Sun appears to be brighter because it is closer to us.

The intrinsic luminosity of Sirius is exactly 25.4 times more than the sun but if we compare the distances of these stars, Sirius is 8.6 light years away from us and the Sun is just 8 light minutes away from us. This marks the obvious reason why our Sun appears more bright.

Even mathematically, it can be justified as the apparent brightness of any luminous object depends on the inverse square of the distance of that luminous object. Therefore the sun's light energy dominates our sky and we can't see any traces of Sirius from the earth.

Learn more about the star Sirius on

https://brainly.com/question/15851246?referrer=searchResults

#SPJ4

The velocity of both objetcs after the collision is 3.07m/sec if both object masses are 6.2 kg and 8.0kg respectively.

To find the velocity of both objects we need to conserve the momentum. We need to follow the law of conservation of momentum which states that initial momentum is equal to final momentum.

Now, we know that momentum =mass × velocity

So, initial momentum of first object=6.2×3=18.6Kg-m/sec

Similarly, initial momentum of second object=8×3.5=28.0kg-m/sec

Now, it is given that both object stick together, so total mass of both objects are=(6.2+8)=14.2kg

Now, both objects are moving with common velocity, so assume both have velocity v

=>So, final momentum of both objects is =14.2×v

according to law of conservation of momentum

=>18.6+25=14.2v

=>43.6=14.2v

=>v=43.6/14.2

=>v=3.07m/sec

Hence, final velocity of objects are 3.07m/sec.

To know more about velocity, visit here:

https://brainly.com/question/18084516

#SPJ4

Recommend frequent hand washing are the treatment method developed after the discovery of germ theory.

Learn more about steps of proper handwashing refer to :

https://brainly.com/question/29628173

#SPJ1

When it happens mother should have to do cool the burn with tap water for 10 to 20 minutes immediately.

Stop the burning process. Cool the burn. Supply pain relief.

Before the arrival of qualified emergency help, you should:

Pain and skin injury from wet heat or vapors can result from hot water scalding. Because the damaged tissues and cells are destroyed, this kind of burn can be deadly. The heat could even cause your body to go into shock. These burns can be fatal in more severe circumstances.

Cool the burn.

Place the affected area under cool (not cold) flowing water for about 10 minutes. Until the pain goes away, apply a cool, wet cloth to the burned area of the face. If you have a mouth burn from hot food or drink, place a piece of ice in your mouth for a while.

To know more about burn click:

https://brainly.com/question/18526186

#SPJ4

Three helium-4 nuclei (alpha particles) are turned into carbon by a series of nuclear fusion processes known as the triple-alpha process.

What results from the triple-alpha procedure as the finished product?

The triple-alpha process and the alpha process are two classes of nuclear fusion reactions that stars use to change helium into heavier elements. The alpha process is also referred to as the alpha ladder. [1] Only helium is used in the triple-alpha process, which also yields carbon.

Which statement concerning alpha particles in an atom is accurate?

Two protons and two neutrons make up alpha particles, which are identical to helium nuclei and have a positive charge.

Learn more about Alpha Particle

Visit:

https://brainly.com/question/17464734

#SPJ4

The free-fall acceleration on Mars is 3.71 m/s²

Given :

gravitational force acting on the robot is 504.6 N

F= 504.6 N

mass of the robot  = 136 kg

a = F/ m

= 504.6/ 136 =3.71 m/s²

The free-fall acceleration on Mars is 3.71 m/s²

To learn more about free-fall acceleration refer,

https://brainly.com/question/12646763

#SPJ1

The speed of the wave is determined as 18 m/s.

option D is the correct answer.

The speed of the wave is the rate of change of wave's displacement with time.

The speed of the wave is calculated by applying the formula relating speed, wavelength and frequency of the wave as shown below.

v = fλ

where;

The frequency of the wave is calculated as follows;

f = 1 / T

where;

The period of a wave is the time taken for the wave to complete one cycle.

In the picture given, 3 cycles of the wave = 0.5 s

1 cycle of the wave = ?

= 0.5 s / 3

= 0.16667 s

f = 1 / T

f = 1 / 0.16667

f = 6 Hz

The speed of the wave is calculated as follows;

v = fλ

v = 6 Hz  x  3 m

v = 18 m/s

Learn more about speed of wave here: https://brainly.com/question/2142871

#SPJ1

The velocity of vehicles after the collision is 15.82m/sec if car mass is 1.4 × 10³kg and truck mass is 2×10³kg

We know that we need to conserve the momentum of watermelon in a certain direction. Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.

We know that momentum =mass × velocity

So,initial momentum of car is =1.4 × 10³kg × 37km/hr

Similarly,,initial momentum of truck=2×10³kg × 35km/hr

Now,it is given that both vehicles lock together,so total mass of both vehicles is =1.4 × 10³kg +  2×10³kg=3.4 ×10³kg

Assume final velocity of both vehicle is v

So,following the law of conservation,we get

=>1.4 × 10³kg × 37 + 2×10³kg × 35 = 3.4 ×10³ ×v

=>51.8 ×10³ + 2×10³=3.4×10³ ×v

=>53.8 ×10³ kg-m/sec = 3.4×10³ ×v

=>v = 53.8/3.4

=>v=15.82m/sec

Hence,final velocity of both vehicle after collision is 15.82m/sec.

To know more about velocity,visit here:

https://brainly.com/question/18084516

#SPJ4

Answer:

Here is answer

Explanation:

a) The weight of the solid 'S' is a contact force because it acts on the solid 'S' through physical contact with the ground.

b) The characteristics of the weight of solid 'S' are:

It acts in the downward direction.

It is a gravitational force that is exerted by the Earth on the solid 'S'.

It is equal to the mass of the solid 'S' multiplied by the acceleration due to gravity (W = m*g).

c) The weight of solid 'S' can be represented by a vector as shown below:

[asy]

unitsize(1cm);

draw((0,0)--(0,15),Arrow(6));

label("$W$", (0,7.5), W);

[/asy]

a) The other forces acting on solid 'S' are the normal force exerted by the inclined plane on the solid 'S' and the frictional force exerted by the inclined plane on the solid 'S'. The normal force is a contact force, while the frictional force is also a contact force.

b) These forces can be represented by vectors as shown below:

[asy]

unitsize(1cm);

draw((0,0)--(0,15),Arrow(6));

label("$W$", (0,7.5), W);

draw((0,0)--(15sqrt(2)/2,15/2),Arrow(6));

label("$N$", (7.5sqrt(2),7.5), NE);

draw((0,0)--(-15sqrt(2)/2,-15/2),Arrow(6));

label("$F_f$", (-7.5sqrt(2),-7.5), SW);

[/asy]

c) The characteristics of these forces are:

The normal force acts perpendicular to the surface of the inclined plane.

The frictional force acts in the opposite direction to the direction of motion or intended motion of the solid 'S'.

The magnitude of the normal force is equal to the weight of the solid 'S', but in the opposite direction.

The magnitude of the frictional force depends on the coefficient of friction between the solid 'S' and the inclined plane, as well as the normal force.

a) The new force acting on solid 'S' is the gravitational force, which is a force acting from a distance.

b) The characteristics of the gravitational force are:

It acts in the downward direction.

It is a force that is exerted by the Earth on the solid 'S'.

Its magnitude can be represented by the vector shown below (using a scale of 1 cm to represent 1.3 N):

[asy]

unitsize(1cm);

draw((0,0)--(0,-1.3),Arrow(6));

label("$W$", (0,-0.65), S);

[/asy]

The kinetic energy is 939.87 J.

Kinetic energy is the power that an object has as a result of motion. If we want to accelerate an object, we have to exert force. Applying force requires effort on our part. The object will be moving at a new, constant speed once the work is done because energy has been transferred to it.

A particle, an object, or a collection of particles can move because of kinetic energy, which is the force that drives motion. Kinetic energy is used by objects in motion like a person walking, a baseball being thrown, food falling from a table, and charged particles in an electric field.

Kinetic energy = 1/2mv²

Kinetic energy =  1/2×0.06×177²

Kinetic energy = 939.87 J.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

The height of the cliff, given that her phone landed 20 m away when she accidentally threw her phone with a velocity of 5 m/s is 78.4 m

To determine the height of the cliff, we must first obtain the time taken for her phone to reach the ground. This is obtained as follow:

s = ut

20 = 5 × t

Divide both sides by 5

t = 20 / 5

t = 4 s

Finally, we shall determine the height of the cliff. Details below:

h = ½gt²

h = ½ × 9.8 × 4²

h = 4.9 × 16

h = 78.4 m

Thus, the height of the cliff is 78.4 m

Learn more about height:

https://brainly.com/question/22740770

#SPJ1

sheesh sheesh                                                    

Explanation:

The volume of the toy is 80 ml.

To find the volume of the plastic toy, Maher can use the principle of buoyancy. When an object is placed in a fluid, it will displace an amount of fluid equal to its own volume. The volume of the displaced fluid can be measured and used to calculate the volume of the object.

In this case, Maher has placed the toy in a graduated cylinder filled with water, and he has observed that the water level increased from 70 ml to 150 ml. This means that the toy displaced 150 - 70 = 80 ml of water.

The volume of the toy is equal to the volume of the displaced water, so the toy's volume is 80 ml. This is the volume of the toy when it is completely submerged in water.

It's important to note that the volume of an object can change depending on its temperature, pressure, and other factors. To get an accurate measurement of the volume of the toy, Maher should make sure to measure the volume of the displaced water carefully and under controlled conditions.

Answer:

Volume of the toy: [tex]80\; {\rm mL}[/tex].

Average density of the toy: [tex]2\; {\rm g\cdot mL^{-1}}[/tex] (or equivalently, [tex]2\; {\rm g \cdot cm^{-3}}[/tex].)

Explanation:

The graduated cylinder initially measures the volume of water in this cylinder:

[tex]V(\text{water}) = 70\; {\rm mL}[/tex].

Assume that the toy is submerged in the water. The graduated cylinder would then measure the volume of the water and the toy, combined:

[tex]V(\text{water}) + V(\text{toy}) = 150\; {\rm mL}[/tex].

Rearrange to find the volume of the toy:

[tex]\begin{aligned}V(\text{toy}) &= 150\; {\rm mL} - V(\text{water}) \\ &= 150\; {\rm mL} - 70\; {\rm mL} \\ &= 80\; {\rm mL}\end{aligned}[/tex].

To find the average density of this toy, divide mass by volume:

[tex]\begin{aligned}(\text{average density}) &= \frac{(\text{mass})}{(\text{volume})} \\ &= \frac{160\; {\rm g}}{80\; {\rm mL}} \\ &= 2\; {\rm g\cdot mL^{-1}}\end{aligned}[/tex].