Answer:
The third ionization energy is the energy it takes to remove an electron from a 2+ ion. (That means that the atom has already lost two electrons, you are now removing the third.) And 2nd ionization energy is higher than 1st ionization energy, 3rd is higher than 2nd, and so forth.
hope it is helpful :)
The table below gives the atomic mass and relative abundance values for the three isotopes of element M.
Relative abundance (%) Atomic mass (amu)
78.99 23.9850
10.00 24.9858
11.01 25.9826
What is the average atomic mass (in amu) of element M?
2.86
5.36
24.30
24.98
Answer:
24.30
Explanation:
Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.
(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)/100
24.30 is the average atomic mass (in amu) of element M.
What is an atomic mass?Atomic mass is the quantity of matter contained in an atom of an element.
Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.
(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)
2430.501576 ÷ 100
24.30
Hence, 24.30 is the average atomic mass (in amu) of element M.
Learn more about atomic mass here;
https://brainly.com/question/14250653
#SPJ2
a chemical compound in which ions are held together in a lattice structure by ionic bonds
Answer:
Ionic compounds contain ions and are held together by the attractive forces among the oppositely charged ions
Explanation:
Common salt (sodium chloride) is one of the best-known ionic compounds. Molecular compounds contain discrete molecules, which are held together by sharing electrons (covalent bonding).
What is oxidation state?
Answer:
a number assigned to an element in chemical combination which represents the number of electrons lost (or gained, if the number is negative), by an atom of that element in the compound
Explanation:
sodium, magnesium, iron is zero.
The definition of oxidation state is as follows: Oxidation state is a number given to the atom of an element when participating in a chemical reaction.
OXIDATION STATE:The atoms of elements are not always neutral i.e. carry no charge. They sometimes carry either positive or negative charges to become ions. Ions can either be cations (positively charged) or anions (negatively charged). The amount of charges are represented by numbers placed as a superscript in front of the element involved. These superscript charge assigned to a corresponding element during a chemical reaction is called oxidation state. The oxidation state of an element portrays the number of electrons gained or lost during the reaction.Therefore, oxidation state can be defined as a number given to the atom of an element when participating in a chemical reaction.
Learn more about oxidation state at: https://brainly.com/question/11313964
For the reaction, calculate how many moles of the product form when 0.046 mol of O2 completely reacts.
Assume that there is more than enough of the other reactant.
2Ca(s)+O2(g)→2CaO(s)
Express your answer using two significant figures.
Answer: 0.023 moles of CaO.
Explanation:
The balanced equation tells us that we'll get 2 moles of CaO for every one mole of O2. Since we have 0.046 moles of O2, we'll get 0.023 moles of CaO. (2 sig figs)
methane is called an organic compound why
Answer:
Explanation:
1) Organic compounds always contain only p-block elements (Groups III-VII), at least one of which must be carbon. 2) Organic compounds almost always contain one or more C-H bonds. ... Thus, all bonds are typically covalent in organic compounds. Methane (CH4) is the prototypical organic molecule.
Methane contains carbon, forming covalent bonds, and is found in living organisms, making it an organic compound.
Methane (CH₄) is considered an organic compound due to its molecular structure and occurrence in living organisms. Organic compounds are primarily composed of carbon atoms covalently bonded to hydrogen and often other elements like oxygen, nitrogen, sulfur, and more.
Methane consists of one carbon atom bonded to four hydrogen atoms through covalent bonds. Carbon's unique ability to form stable covalent bonds with other elements, including itself, leads to the vast diversity of organic molecules found in living organisms.
Methane is a crucial component of natural gas and is produced by various biological and geological processes. It is present in the digestive systems of animals, formed during decomposition, and plays a role in carbon and energy cycles.
Its prevalence in living systems and its molecular structure classify methane as an organic compound, reflecting the foundational principles of organic chemistry.
To learn more about Organic compounds here
https://brainly.com/question/28682641
#SPJ3
The complete question is :
Methane is called an organic compound why?
How are mitosis and meiosis similar? How are they different? Provide 1 way the two processes are the same and 2 ways the 2 processes are different.
Answer:
Similar: both processes of cell division; both processes take place in the nucleus of the cell
Different: mitosis divides into 2, meiosis divides into 4; one is the division of body cells and the other is of specifically sex cells
Explanation:
https://byjus.com/biology/mitosis-and-meiosis/
^ this has more info!
Describe the two categories used to classify physical changes.
Answer:
Physical changes can be classified as reversible or irreversible. Melting is an example of a reversible physical change.
Explanation:
How are traits inherited?
Please explain thoroughly
inherited traits are passed from parent to offspring according to the rules of Mendelian genetics. Most traits are not strictly determined by genes, but rather are influenced by both genes and environment
what is an environmental result from burning fossil fuels?
Answer:
The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth's atmosphere.
how long does vacuum sealed raw meat last in the freezer?
Answer:
Frozen Meats – Frozen raw meats that are properly vacuum sealed can be stored in the freezer from 1-3 years depending on the type of meat. However, raw meat that is not vacuum sealed will only last 1-12 months depending on the meat.
Explanation:
hop this helps
Answer: Six months or three years
Explanation: Frozen meats, poultry, and fish can last in the freezer for up to six months and when they are vacuum sealed, frozen meats can stay fresh and free from freezer burn for up to 3 years.
¿Qué relación existe entre la teoría del octeto de Lewis con los enlaces iónicos y
covalentes?
Por definición de enlace iónico, covalente y regla del octeto, la relación existente entre la teoría del octeto de Lewis con los enlaces iónicos y covalentes es que dichos enlaces se producen con el objetivo de completar la última capa de electrones y adquirir estabilidad.
Enlace iónicoPor un lado, se produce un enlace iónico entre átomos metálicos y no metálicos, donde los electrones se transfieren completamente de un átomo a otro. Durante este proceso, un átomo pierde electrones y otro los gana, formando iones. Por lo general, el metal cede sus electrones formando un catión al elemento no metálico, que forma un anión.
Enlace covalentePor otro lado, el enlace covalente es el enlace químico entre átomos donde los electrones se comparten, formando una molécula. Se establecen enlaces covalentes entre elementos no metálicos. El par de electrones compartidos es común a los dos átomos y los mantiene unidos.
Regla del octetoEn ambos casos se cumple con la regla del octeto, que establece que los átomos de los elementos se enlazan unos a otros en el intento de completar su capa de valencia con ocho electrones. Es decir que los átomos van a tender a ceder o compartir electrones para completar ocho electrones en la capa de valencia mediante un enlace iónico, covalente o metálico.
En otras palabras, el objetivo es tener la configuración electrónica del gas noble más cercano, teniendo así la última capa de electrones completa y adquiriendo estabilidad.
En resumenEn resumen, la relación existente entre la teoría del octeto de Lewis con los enlaces iónicos y covalentes es que dichos enlaces se producen con el objetivo de completar la última capa de electrones y adquirir estabilidad.
Aprende más:
https://brainly.com/question/17100232?referrer=searchResultshttps://brainly.com/question/21960608?referrer=searchResults
Describe how the suspects used the chemicals found at the crime scene to make the copper coins look silver.
The chemicals found at the crime scene although not mentioned must be Sodium zincate.
Discussion:
An interesting demonstration to show plating and alloys is the conversion of copper coins to silver look-alike coins.
A 'copper' coin when dipped into a solution of sodium zincate in contact with zinc. The coin is plated with zinc and appears silver in colour.
This is a common chemistry classroom trick.
Read more on plating:
https://brainly.com/question/20078989
Which was the first ""cell"" viewed by the light microscope?microbeatomdnaoak bark.
Answer:
The cork cell
Explanation:
Which of the following correctly lists the particles in order from least massive to most massive.
A. electron, proton, hydrogen atom, helium atom
B. proton, electron, hydrogen atom, helium atom
C. proton, helium atom, hydrogen atom, electron
D. hydrogen atom, electron, helium atom electron
Answer:
The ans is : A. Electron, proton, hydrogen atom, helium atom.
An atom consist of sub atomic particles. The order of particles from least massive to most massive is electron, proton, hydrogen atom, helium atom. The correct option is A.
What are subatomic particles?The particles which are smaller in size than the atom are known as the sub atomic particles. An atom generally contains three sub atomic particles, they are protons, electrons and neutrons. The electrons revolve around the nucleus whereas the protons and neutrons are present at the center of the nucleus.
The protons are positively charged particles whereas the electrons are negatively charged. The neutrons are chargeless. The atomic number of 'H' atom is 1 and that of 'He' atom is 2.
The mass of e⁻ is 9.1 × 10⁻³¹ kg, proton is 1.67 × 10⁻²⁷ kg, 'H' atom is 1.66 × 10⁻²⁴ g, 'He' is 4 g. Thus the order is:
electron, proton, hydrogen atom, helium atom
Thus the correct option is A.
To know more about atom, visit;
https://brainly.com/question/14214017
#SPJ6
I have to answer questions about science
Answer:
What Questions?
Explanation:
What Questions?
Answer:
Explanation:
What is the Questions frist ?
a
A sample of gas has a volume of 3.50 L and a pressure of
125 mm Hg. What will the new pressure be when the volume
is decreased to 2.75 L? The temperature stays the same.
Answer:
159.09 mmHgExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
From the question we have
[tex]P_2 = \frac{125\times3.50 }{2.75} = \frac{437.5}{2.75} \\ = 159.090909...[/tex]
We have the final answer as
159.09 mmHgHope this helps you
Define valence electrons.
Answer:
Electrons on the outermost shell of an atom. They are responsible for the chemical properties of an atom.
If anhydrous mgso4 is the desired product, what is the atom economy of this reaction?.
This problem is referring to an anhydrous salt that is derive from a hydrated Epson salt (magnesium sulfate hydrate) and the atom economy is required. However, not enough information is provided, yet we can use the attached file as a reference to provide a methodology of calculation.
To begin with, we need to calculate the [tex]x[/tex] which refers to the degree of hydration of the salt, so that we use the mass before and after heating the sample to figure out the grams and subsequently moles of water that are in there:
[tex]m_w=3.648g-1.782g=1.866g\\\\n_w=0.103molH_2O[/tex]
Next, since 1.782g corresponds to the anhydrous salt, we calculate the moles in such a amount:
[tex]1.782gMgSO_4*\frac{1molMgSO_4}{120.4gMgSO_4}=0.0148mol[/tex]
Then, we divide the moles of water by those of the anhydrous salt to calculte [tex]x[/tex]:
[tex]x=\frac{0.103mol}{0.0148mol} =6.96=7[/tex]
This means the formula of the hydrate is:
[tex]MgSO_4\ 7H_2O[/tex]
Finally, for the atom economy we just divide the molar mass of the anhydrous salt by that of the hydrate:
[tex]A.E=\frac{120.4g/mol}{246.47g/mol} *100\%\\\\A.E=48.8\%[/tex]
Learn more:
https://brainly.com/question/20796771the proton concentrations of three solutions at 25 °c are given. classify the solutions as acidic, basic, or neutral.
This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.
Let the following solutions to come up:
[H⁺] = 2.63x10⁻³ M
[H⁺] = 1.00x10⁻⁷ M
[H⁺] = 4.511x10⁻⁹ M
The first step, will be the calculation of the pH for each solution via:
pH = -log([H⁺])
So that they turn out to be:
pH = -log(2.63x10⁻³ M) = 2.580
pH = -log(1.00x10⁻⁷ M) = 7.000
pH = -log(4.511x10⁻⁹ M) = 8.3457
In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.
Thus, you can reproduce this methodology with the proton concentrations you are given.
Learn more:
https://brainly.com/question/23659500https://brainly.com/question/23428840what makes your pulse? Explain
bonding and kinetic energy quick check
1. The internal energy within a system associated with the motion of particles and that can be added to a substance is called (1 point)
o temperature
O kinetic energy
O thermal energy
O electrostatic forces
2. which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?
0 the particles within the system will have greater motion and the temperature will increase
0 the particles within the system will have greater motion and the temperature will be grace
0 particles within the system will have less motion and the temperature will increase
0 the particles within the system will have less motion and the temperature will decrease
3. which statement correctly describes how a tractions that holds particles break
0 attractions occur due to gravitational forces when particles move fast enough these forces can no longer keep particles together
0 attractions due to Electrostatic forces when particles move fast enough these forces can no longer keep particles together
0 attractions due to electrostatic forces when particles have low enough energy these forces can no longer keep particles together
0 attractions occurred due to gravitational forces when particles have low enough energy these forces can no longer keep particles together
4. Which statement explains why a rubber band analogy is not a perfect comprehension for Bonds in a substance when considering phases change
0 for a phase change from solid to liquid the bonds do not break completely and particles can still slide past each other
0 for a phase change from liquid to gas the bonds do not break completely the particles can still slide past each other
0 for a phase change from liquid to gas the bonds break completely and of particles can independently of each other
0 phase change from solid to liquid the bond breaks completely particles can move independently of each other
5.the boiling point of benzene is 80°C. which pair of samples will have the same average kinetic energy of benzene molecules?
0 two samples of gaseous benzene, at 80°C and the other 90°C
0 two samples of liquid benzene, one at 70°C and the other at 80°
0 a sample of liquid benzene at 70°C and a sample of gaseous benzene at 90°C
0 a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°celectric
When energy is added to a system during phase change, the particles move faster.
When a substance is heated, the internal energy within a system associated with the motion of particles and that can be added to a substance is called thermal energy.
During a phase change, when more energy is added to the system, the particles within the system will have greater motion and the temperature will increase.
The attractions that hold molecules together are electrostatic forces. The correct statement about the attractions that hold particles is that attractions between particles break when attractions due to Electrostatic forces when particles move fast enough these forces can no longer keep particles together.
Rubber band is not a perfect comprehension for Bonds in a substance when considering phases change because for a phase change from liquid to gas the bonds do not break completely the particles can still slide past each other.
The pair of samples that will have the same average kinetic energy of benzene molecules is a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C.
Learn more: https://brainly.com/question/671212
Draw the structure of the product that is formed when the compound shown below undergoes a reaction with 1 equivalent of ch3mgi and then is treated with water.
When the compound shown is treated CH3MgI followed by water, 1,3 - cyclohexadienol is formed.
Grignard reagent is an alkylmagnesium halide. Grignard reagents are important synthetic tools in chemistry. They are used to synthesize and number of compounds in the laboratory.
When the Grignard reagent, CH3MgI is reacted with compound shown followed by treatment with water, the product of the reaction is 1,3 - cyclohexadienol whose structure is shown in the second image attached to this answer.
Learn more: https://brainly.com/question/9309478
Which shows the general structure of a carboxylic acid?
O A. R
O-R
R
O R
B. R-O-R
C. R-OH
OD ROH
The general structure of a carboxylic acid is shown by option D.
In organic chemistry, a carboxylic acid is an organic acid that consists of a carboxyl group connected to an R-group. the overall components of carboxylic acid are R−COOH or R−CO₂H, with R referring to the alkyl, alkenyl, aryl, or other institution. Carboxylic acids arise broadly.
A carboxylic acid is a natural compound that incorporates a carboxyl group (C(=O)OH). the general formulation of a carboxylic acid is R–COOH, with R referring to the relaxation of the molecule. A carboxylic acid may be the concept of a mixture between functional corporations: an alcohol institution, related to hydrogen certain to oxygen, which attaches to a carbonyl institution, involving a carbon double sure to oxygen.
Learn more about carboxylic acid here:-https://brainly.com/question/26855500
#SPJ1
What type of molecule is pentanal?
A. Aldehyde
O B. Ketone
O C. Alcohol
O D. Ester
Answer:
[tex] \huge \color{indigo} \boxed{a. \: aldehyde}[/tex]
Explanation:
Pentanal is considered to be a fatty aldehyde lipid molecule. These are compounds containing more than one aldehyde group. Pentanal is a very hydrophobic molecule, practically insoluble in water, and relatively neutral.
In an experiment trying to dissolve sugar in water, a person boils water in a pot on the stove and then puts the water and the sugar in a cup. That person times how long it takes to dissolve the sugar.
According to the concept of solubility, boiling water and then adding sugar to it will take longer time to dissolve than adding water and sugar together to boil as thermal energy requires to dissolve sugar will be less.
What is solubility?Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/29589228
#SPJ5
is isopropyl alcohol the same as hydrogen peroxide
Answer:
Unlike isopropanol, hydrogen peroxide is not a type of alcohol. You might recognize its chemical formula, H2O2, as being similar to that of water (H2O). The difference is that hydrogen peroxide has two oxygen atoms instead of one. That one extra oxygen atom makes it a strong oxidizer.
What is called exothermic
An exothermic process is one that gives off heat.
Explanation:
This heat is transferred to the surroundings. An endothermic process is one in which heat has to be supplied to the system from the surroundings.
How many molecules are in 25.3g of C2H4O
Answer:
0.57 molecules
Explanation:
which characteristic do valence electrons indicate about reactions between atoms?
Bond number
The characteristic of reactions that depends on valence electrons is the bond type.
In chemistry, a chemical bond could be;
Ionic
Covalent
The type of bond formed depends on the number of valence electrons present. When there are few valence electrons on an atom, it mostly forms ionic bonds.
When there are more electrons on an atoms, it mostly forms covalent bonds and the electrons between the atoms are shared.
How are covelant and ionic bonds different and what types of elements combine to form each?
Answer:
Ionic bonds result from the transfer of electrons from one atom to another
Explanation:
In covalent bonds, atoms share electrons, whereas in ionic bonds atoms transfer electrons. The reaction components of covalent bonds are electrically neutral, whereas for ionic bonds they are both charged.Covalent bonds are formed between two non-metals, whereas ionic bonds are formed between a metal and non-metal.
Answer:
Covalent bonds are defined as sharing of electrons, ionic bonds are the result of transferred electrons;
Covalent bonds form between non-metals (elements) and ionic bonds form between metal and non-metals (ions)
