Answer:
yes I do think they mean the same thing
Explanation:
150 grams and 150 grams is the same thing and adding 0 to the end of a decimal does not change its value, you could even put 150.0000000 grams and it would still be equivalent to the other numbers
Which substance is a binary acid?
hydrochloric acid
phosphoric acid
nitrous acid
sulfuric acid
Answer:
A) Hyrdrochloric Acid
Explanation:
This is because binary acids are molecular compounds in which hydrogen is combined with a non-metal element. Hydrochloric acid has hydrogen present in it's compound, therefore identifying it as the only binary acid amongst the answer choices.
Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion
Explanation:
Anything that occupies space and has mass is called matter.
(a) Inter particle space
Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.(b) Inter particle force of attraction
Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.(c) Particle motion
Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids.How many atoms are in 9.8 moles of NaCl?
Answer:
a lot but im pretty sure if u just take avogadros number and multiply it by 9.8 u get the answer
Explanation:
There are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl. Details about number of atoms can be found below.
How to calculate number of atoms?The number of atoms of a compound can be calculated by multiplying the number of moles of the substance by Avogadro's number.
no of atoms = no of moles × 6.02 × 10²³
According to this question, there are 9.8 moles of NaCl.
no of atoms = 9.8 × 6.02 × 10²³
no of atoms = 5.896 × 10²⁴
Therefore, there are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl.
Learn more about number of atoms at: https://brainly.com/question/8834373
#SPJ2
Balance the equation above please
Answer:
Balanced Equation:-Al2(CO3)3. ---heat---> Al2O3 + 3 CO2
Answer:
everything can be found in the picture
Describe the formation of calcium chloride (4 marks)
Answer:
It is an ionic compound that consists of one calcium cation Ca2+ and two chlorine anions. The bivalent calcium metal forms an ionic bond with two chlorine atoms. The formation of cacl2 happens mainly by reacting limestone (CaCo3) with hydrochloric acid (HCl).
What is the term for the repeating pattern in a crystalline structure?
a) Repeating pattern
b) Base pattern
c) Unit cell
d) Primitive pattern
Answer:
Because a crystalline solid consists of repeating patterns of its components in three dimensions (a crystal lattice), we can represent the entire crystal by drawing the structure of the smallest identical units that, when stacked together, form the crystal. This basic repeating unit is called a unit cell.Aug 12, 2020
What is the molarity if 60.4 grams of hydrochloric acid was added to 505 mL of water?
M
H - 1.0079 g/mol
Cl- 35.453 g/mol
Answer:
3.29 M
Explanation:
Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:
Molarity (M) = number of moles (n) ÷ volume (V)
According to this question, the mass of HCl was given to be 60.4 grams and the volume of water as 505 mL.
Using mole = mass/molar mass to convert mass of HCl to moles
Molar mass of HCl = 1.0079 + 35.453 = 36.4609g/mol
mole = 60.4g ÷ 36.4609g/mol
mole = 1.66mol
Volume of water = 505mL = 505/1000 = 0.505L
Molarity, M = 1.66 ÷ 0.505
Molarity of HCl solution = 3.29 M
Hydrogen and nitrogen react to form ammonia. The chemical equation for this reaction is shown here. 3 H2(g) + N2(g) 2 NH3(g). What amount of hydrogen will produce 44.0 mol of ammonia?
66.0 mol
88.0 mol
132.0 mol
29.3 mol
Answer:
someone already answered but i think it's 132.0 mol too
any of ya'll good at chemistry?????
Answer:
i good at chemistry
Explanation:
not all but i try
On a graph showing distance versus time, a horizontal line represents an object that is
moving at a constant speed.
increasing its speed.
decreasing its speed.
not moving at all.
Answer:
the anwser is; B: increasing its speed
Q.does salt make water boil at a higher temperature?
Answer:
Yes
Explanation:
The salt increases the boiling point, meaning it make water boil at a higher temperature, and it decreases the specific heat capacity, meaning it will heat up quick.
6. Which of the following represent kinetic energy? *
(1 Point)
the water behind a dam
O a boulder hug from a net over a pit
a calculator falling to the floor
the string on a bow before being released
Answer:
weter
Explanation:
existen mas de 10 millones de cmpuestos organicos o inorganicos
so dfhhdjdjjfjfjjdjdjdj
How many centimeters are in 5 miles? Hint: 1 miles = 5280 feet
What is the empirical formula of a compound containing 5.03 g carbon, 0.42 g hydrogen, and 44.5 g of chlorine
Answer:
CHCl₃
Explanation:
We have the following data:
C = 5.03 g
H = 0.42 g
Cl= 44.5 g
First, we divide each mass by the molar mass (MM) of the chemical element to calculate the moles:
MM(C) = 12 g/mol
moles of C = mass/MM(C) = 5.03 g/(12 g/mol) = 0.42 mol C
MM(H) = 1 g/mol
moles of H = mass/MM(H) = 0.42 g/(1 g/mol) = 0.42 mol H
MM(Cl) = 35.4 g/mol
moles of Cl = mass/MM(Cl) = 44.5 g/(35.4 g/mol) = 1.26 mol Cl
Now, we divide the moles by the smallest number of moles (0.42):
0.42 mol C/0.42 = 1 C
0.42 mol H/0.42 = 1 H
1.26 mol Cl/0.42 = 3 Cl
Thus, the C:H:Cl ratio is 1:1:3.
Therefore, the empirical formula is CHCl₃
Answer:
CHCl₃
Explanation:
Which will boil faster distilled water or salt water and why?
Answer:
The distilled water will be boiled faster as it does not contain any non - volatile solute.
- The salty water contains different non - volatile salts in it.
- Due to the presence of these salts, its vapour pressure will be decreased and boiling point will be elevated.
- So, salty water will take more time to boil.
- On the other hand, distilled water does not have any such solute and due to this its vapour pressure will not be affected.
- Hence, it will boil fast than salty water.
Método científico: El trabajo científico se caracteriza por ser planificado, con objetivos iniciales y que habitualmente se dan en un cierto orden.1) Indica cuáles son los pasos del método científico explicando brevemente cada uno de ellos.2) Los siguientes son dos modelos : *Un estudiante pensando en la competencia, desarrolla un proyecto en el sótano de su casa. *Un grupo de personas con diferentes aptitudes cooperan para resolver un problema. ¿Cuál de ellos es mejor para el trabajo científico? ¿Por qué?
Answer:
Ver explicación
Explanation:
El método científico se refiere al patrón establecido de resolución de un problema científico. Los siguientes son pasos importantes en el método científico;
Haz una observación.
formular preguntas relevantes.
elabore una hipótesis que pueda ser probada.
Diseña un experimento.
Prueba la hipótesis usando tu diseño experimental.
Teniendo en cuenta ambos escenarios, el último caso en el que estudiantes de diferentes capacidades trabajan juntos para resolver un problema refleja mejor el método científico porque pueden hacerse preguntas entre sí y llegar a hipótesis comprobables que pueden demostrarse como verdaderas o falsas mediante experimentos.
A compound being used in experimental medicine is 78.14% boron (B) and 21.86% hydrogen (H). The empirical formula of the compound will have a boron to hydrogen ratio of
Explanation:
I did it step by step so It would be easier to understand:)
The table below gives some characteristics of element Y.
Characteristics of element Y Values
Mass number 11
Number of neutrons in a single atom 6
Average atomic mass (grams/mole) 10.81
What is the identity of element Y?
Answer:
Boron B
Explanation:
According to the periodic table, Boron is the element with atomic mass of approximately 11 [i.e 10.81]
To calculate Neutrons
Neutrons = Mass number - Protons
Number of protons in Boron is same as atomic number which is 5
Thus, N = 11 - 5 = 6
Calculate the standard enthalpy change for the reaction 2A+B⇌2C+2D Use the following data: Substance ΔH∘f (kJ/mol) A -235 B -413 C 193 D -493
Answer:
ΔH = 283kJ/mol
Explanation:
Using Hess's law, the ΔH of a reaction is equal to the sum of ΔH° of products times its coefficient subtracting the sum of ΔH° of reactants times its coefficient. Replacing, for the reaction:
ΔH = 2ΔH°C + 2ΔH°D - (2ΔH°A+ΔH°B)
ΔH = 2*193kJ/mol + 2*-493kJ/mol - (2*-235kJ/mol+ (-413kJ/mol)
ΔH = 283kJ/molWhat is the limiting reactant in a reaction where 10.0 mol of iron is treated with 12.0 mol of bromine? The product that forms is FeBr3. First, write and balance the chemical equation. Next, calculate the moles of FeBr3 that can be made from 10.0 mol of Fe. Then calculate the moles of FeBr3 that can be made from 12.0 mol of bromine. The smaller amount of FeBr3 reveals the limiting reactant.
Answer: The limiting reagent in the reaction is bromine.
Explanation:
Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.
Excess reagent is defined as the reagent which is left behind after the completion of the reaction.
Given values:
Moles of iron = 10.0 moles
Moles of bromine = 12.0 moles
The chemical equation for the reaction of iron and bromine follows:
[tex]2Fe+3Br_2\rightarrow 2FeBr_3[/tex]
By the stoichiometry of the reaction:
If 3 moles of bromine reacts with 2 moles of iron
So, 12.0 moles of bromine will react with = [tex]\frac{2}{3}\times 12.0=8moles[/tex] of iron
As the given amount of iron is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.
Hence, bromine is considered a limiting reagent because it limits the formation of the product.
Thus, the limiting reagent in the reaction is bromine.
Valence electrons are important when drawing molecular structures because
a. They are closest to the nucleus of the atom and do not participate in chemical
bonding
b. They are closest to the nucleus of the atom and participate in chemical
bonding
c. They are farthest away from the nucleus of the atom and do not participate in
chemical bonding
d. They are farthest away from the nucleus of the atom and participate in
chemical bonding
Answer:
d
Explanation:
Valence electrons are in the outermost shell. They form chemical bonds with other elements, not any other electrons. Hope this helps!
Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.
Answer:
Catalysts allow chemical reactions to occur at temperatures at which the organism lives.
Explanation:
Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.
Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.
_______ reach the surface first during an earthquake.
Rayleigh waves
P waves
Love waves
S waves
What is a natural disaster?
Answer:
Explanation:
A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes
Answer:
A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.
What is the uses of seawater as a source of renewable energy?
Explanation:
Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
chlorine is larger so the symbol is <
Explanation:
How do countries with different currencies trade goods with each other?
A.
They trade actual physical products to avoid confusion over currency differences.
B.
They negotiate to determine which country's currency will be used for the whole exchange.
C.
They create a new shared currency, such as the European Union countries' euro.
D.
They use the exchange rate to convert one country's currency to another's.
Answer:
D- They use the exchange rate to convert one's Country's currency to another's
Explanation:
Which statement about the mass of an electron is correct? A The mass of an electron is equal to the mass of the proton. B The mass of an electron is less than the mass of the proton. с The mass of an electron is equal to the mass of a neutron. D The mass of an electron is greater than the mass of a neutron.
Answer:
B
Explanation:
because mass of an electron is 1/2000.
The statement about the mass of an electron which is correct is: B. The mass of an electron is less than the mass of the proton.
An atom refers to a smallest, indivisible unit that comprises the matter that forms all chemical elements. Therefore, atoms are typically considered as the fundamental building blocks of matter which determines the structure of a chemical element.
Basically, an atom consists of three (3) distinct particles and these include;
Protons. Neutrons. Electrons.
Electrons are the subatomic particles of a chemical element that are negatively charged with a magnitude of -1.
On the other hand, protons can be defined as the subatomic particles of a chemical element that are positively charged.
All of these subatomic particles of a chemical element has a mass. However, the mass of an electron is significantly less than the mass of proton, as a result of its extremely small size.
In conclusion, the mass of an electron is approximately 2000 times smaller than that of a proton and as such contributes almost nothing to the total mass of an atom.
Find more information: https://brainly.com/question/18214726
(04.03 MC)
The table shows the nature of the reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
lonic compound + lonic compound
Products
lonic compound + lonic compound
Which of the following is true about this type of chemical reaction?
It is a single replacement reaction, and all four compounds are different.
It is a double replacement reaction, and all four compounds are different.
It is a single replacement reaction, and each compound has the same set of ions.
It is a double replacement reaction, and each compound has the same set of ions.
Answer: The given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.
Explanation:
When two different compounds chemically react with each other and their ions get exchanged with each other then it leads to the formation of two new compounds. This type of reaction is called double displacement reaction.
For example, [tex]KBr + AgNO_{3} \rightarrow KNO_{3} + AgBr(\downarrow)[/tex]
Here, both KBr and [tex]AgNO_{3}[/tex] are ionic compounds that leads to the formation of two new ionic compounds which are [tex]KNO_{3}[/tex] and AgBr.
Thus, we can conclude that the given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.
