Draw a formula for Thr-Gly-Ala (T-G-A) in its predominant ionic form at pH 7.3. You may assume for the purposes of this question that the pKa values of the acidic groups of amino acid residues in the peptide are the same as in the amino acid itself.

Answer:

1860g.

Explanation:

It is known that the molar mass of C2H6O2 is 62.08 g/mol.,

Now to  solve for the number of moles of solute, one must multiply both

sides by the volume:

moles of solute = (6.00 M)(5.00 L) = 30.0 mol

Notice since the definition of molarity is mol/L, the

product M × L gives mol, a unit of amount.

Use the molar  mass of C3H8O3, one can convert mol to g:

Mass m =30 mol × 62.08 g/mol

m = 1860g.

Hence, there are 1,860 g of C2H6O2 in the specified amount of

engine coolant.

Answer:

Calcular la molaridad de una solución que se preparó disolviendo 14 g de KOH en suficiente  

agua para obtener 250 mL de solución. (masa molar del KOH = 56 g/mol).

Resolución: de acuerdo a la definición de “molaridad” debemos calcular primero, el número de mol de soluto (KOH) que  

se han disuelto en el volumen dado, es decir, “se transforma g de soluto a mol de soluto” por medio de la masa molar,  

así:

56 g de KOH 14 g de KOH

----------------- = ------------------- X = 0,25 mol de KOH

1 mol X

Ahora, de acuerdo con la definición de molaridad, el número de mol debe estar contenido en 1000 mL (o 1 L) de  

solución, que es el volumen estándar para esta unidad de concentración, lo que se determina con el siguiente planteamiento:

0,25 mol X

----------------------- = ------------------------- X = 1 mol de KOH

250 mL de solución 1000 mL de solución

Explanation:

Answer:

the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Explanation:

Given the data in the question;

Co = 53 or [ 53 wt% B-47 wt% A ]

W∝ = 0.5 = Wβ

Cβ = 92 or [ 92 wt% B-8 wt% A ]

Now, lets set up the Lever rule for W∝ as follows;

W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]

so we substitute our given values into the expression;

0.5 = [ 92 - 53 ] / [ 92 - C∝ ]

0.5 = 39 /  [ 92 - C∝ ]

0.5[ 92 - C∝ ] = 39

46 - 0.5C∝  = 39

0.5C∝ = 46 - 39

0.5C∝ = 7

C∝ = 7 / 0.5

C∝ = 14  or [ 14 wt% B-86 wt% A ]

Therefore, the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Explanation:

since there are no lone pairs on the central atom, the shape will be tetrahedral

Answer:

Hypercalcemia can cause stomach upset, nausea, vomiting and constipation. Bones and muscles. In most cases, the excess calcium in your blood was leached from your bones, which weakens them. This can cause bone pain and muscle weakness.

Some symptoms are:

Fatigue, bone pain, headaches.

Nausea, vomiting, constipation, decrease in appetite.

Forgetfulness.

Lethargy, depression, memory loss or irritability.

Muscle aches, weakness, cramping and/or twitches.

Answer: 8 for both

Explanation:

Answer:

endet nach selam nw

4gh7

Answer:

41 g

Explanation:

The equation of the reaction is;

Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)

Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles

1 mole of sodium phosphate reacts with 1 mole of chromium nitrate

x moles of sodium phosphate react as with 0.25 moles of chromium nitrate

x= 1 × 0.25/1

x= 0.25 moles

Mass of sodium phosphate = 0.25 moles × 163.94 g/mol

Mass of sodium phosphate = 41 g

Answer:

925.66 J/K

Explanation:

Applying,

Q = CΔt............. Equation 1

Where Q = amount of heat, C = heat capacity of the calorimeter, Δt = rise in temperature.

make C the subject of the equation

C = Q/Δt.............. Equation 2

From the question,

Given: Q = 3.86 kJ = 3860 J, Δt = 4.17K

Substitute into equation 2

C = 3860/4.17

C = 925.66 J/K

Answer:

Explanation:

hope this helps you

The mass of the marble is greater than that of the water. The marble weighs more than an equivalent volume of the water. The force from dropping the marble breaks the surface tension of the water. The marble has greater mass and volume than the water.

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

b) (√)

c)(✓)

hsjdhfjdkskkshd

Answer:

Answer:

Part A

HCOOH(aq) + NaOH(aq) → HCOONa(aq) + H2O(l)

Part B

ClCH2CH2CO2H(aq) + NaOH(aq) ------> ClCH2CH2CO2Na(aq) + H2O(l)

Explanation:

The reaction between an alkanoic acid and a base is a neutralization reaction. The reaction occurs as follows;

RCOOH + NaOH ----> RCOONa + H2O

We have to note the fact that the net ionic reaction still remains;

H^+(aq) + OH^-(aq) ---> H2O(l)

In both cases, the reaction can occur and they actually do occur as written.

[tex]\boxed{\large{\bold{\blue{ANSWER~:) }}}}[/tex]

Explanation:

Answer:

1. more

2. less

3. more

4. less

Explanation:

Answer:

I do not speak Spanish.

Explanation:

Answer:

Livermorium is a radioactive, artificially produced element about which little is known. It is expected to be a solid and classified as a metal. It is a member of the chalcogen group. Livermorium has four isotopes with known half-lives, all of which decay through alpha decay

Answer:

pH= 1.9 then [tex]H_{3} PO_{4}[/tex]

pH = 5.0 , [tex]CH_{3} COOH[/tex]

pH = 3.9 , HCOOH

As we know range left [tex]pH= pKa+/- 1[/tex]

TRUE

Explanation:

*not sure about this answer

In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.

The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:

The addition of barium hydroxide will raise the pH slightly because the buffer still working.

The initial moles of those species are:

Hypochlorous acid:

[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]

Sodium hypochlorite:

[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]

Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:

Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O

For a complete reaction of 0.092 moles of barium hydroxide are required:

[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]

As there are 0.370 moles, the moles of HClO after the reaction are:

0.370 moles - 0.184 moles = 0.186 moles of HClO will remain

As you still have hypochlorite and hypochlorous acid you still have a buffer.

Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.

Learn more about buffers in:

https://brainly.com/question/24302294

Answer:

density of second liquid = 650 kg/m³

Explanation:

Given that:

The volume of the plastic block submerged inside the water  = 0.5 V

The force on the plastic block  = [tex]\rho_1V_1g[/tex]

[tex]= 0.5p_1 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

W [tex]= 0.5p_1 V_g[/tex]

[tex]\rho Vg = 0.5p_1 V_g[/tex]

[tex]\rho = 0.5 \rho _1[/tex]

where;

water density [tex]\rho _1[/tex] = 1000

[tex]\rho = 0.5 (1000)[/tex]

[tex]\rho = 500 kg/m^3[/tex]

In the second liquid, the volume of plastic block in the water = (100-23)%

= 77% = 0.7 V

The force on the plastic block is:

[tex]= 0.77p_2 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

[tex]W = 0.77p_2 V_g[/tex]

[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]

[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]

Answer:

Solution given:

1 mole of KCl[tex]\rightarrow [/tex]22.4l

1 mole of KCl[tex]\rightarrow [/tex]74.55g

we have

0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g

74.55g of KCl[tex]\rightarrow [/tex]22.4l

10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.

[tex]\:[/tex]

1 mole of KCl → 22.4l

1 mole of KCl → 74.55g

we have

0.14 mole of KCl → 74.55*0.14=10.347g

74.55g of KCl  → 22.4l

10.347 g of KCl → 22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.