Answer:
"The elements are arranged in seven horizontal rows, called periods or series, and 18 vertical columns, called groups."
Explanation:
I GIVE OUT FREE POINTS
Structural formula of 2 ethyl, 4 methyl-Heptane
Given the following reaction, how many liters of H2 gas are needed to form 35.5 grams of NH3?
N2 + 3H2 -> 2NH3
Answer:
170.4L
Explanation:
The reaction equation is given as:
N₂ + 3H₂ → 2NH₃
Mass of NH₃ = 35.5g
Problem:
How many liters of H₂ are needed to produce 35.5g of NH₃
Solution:
To solve this problem, let us find the number of moles of NH₃;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of NH₃ = 14 + 3(1) = 17g/mol
So;
Number of moles = [tex]\frac{35.5}{17}[/tex] = 5.07mole
From the balanced reaction equation:
2 mole of NH₃ will be produced from 3 mole of H₂
5.07mole of NH₃ will produce [tex]\frac{5.07 x 3}{2}[/tex] = 7.61mole of H₂
At STP;
1 mole of gas will occupy 22.4L
7.61 mole of H₂ will occupy 7.61 x 22.4 = 170.4L
8. __H2 + __O2-> __H2O
9. __K2SO4 + __H2-> __H2SO4 + __K
10. __NO2 + __H2O-> __HNO3 + __NO
Anser:
Explanation:
hope this helps
Describe the subatomic particles found in an atom, and
describe each one. Also, describe how they relate to each
other.
pls helpp <3
Answer these three please! Thank you <3333
(I will give brainliest)
Answer:
Explanation:
21:B 22:B
The general area of the atom (outside the nucleus) where the e- are located is the — and —
Write one paragraph to summarize Strengths and Weaknesses of Acids and Bases.
Answer:
Explanation: I can't give you the answer you with the sentence but i will help you the best i can
One qualitative measure of the strength of an acid or a base solution is the pH scale A logarithmic scale that relates the concentration of the hydrogen ion in solution.
An object has a mass of 26.94 grams and a volume of 2.568 cubic centimeters. What material is it likely to be
made of?
Substance iron gold silver copper
Density (g/cm) 7.874 19.32 10.49 8.92
a. Silver
c. Iron
b. Gold
d. Copper
Answer:
a) silver
Explanation:
Given data:
Mass of object = 26.94 g
Volume of object = 2.568 cm³
Which subject is this = ?
Solution:
Formula:
d = m/v
by putting values
d = 26.94 g/ 2.568 cm³
d = 10.49 g/cm³
Densities of objects: g/cm³
iron = 7.874
gold = 19.32
silver = 10.49
copper = 8.92
Thus, given object is silver.
In which highlighted section of the periodic table in the diagram provided above are the elements whose atoms have 1 valence electron located?
A) a
B) b
C) c
D) d
Answer:
B.
Explanation:
If you find a chemical in the lab and are unsure of
its identity, what is the best way to find out what it
is?
Answer:
C. read the label on the container
Explanation:
What information is found in an SDS? Check all that apply.
A. the identification of the chemical
C. the chemical and physical properties of the substance
D. the first-aid measures to take if an accident occurs involving the chemical
Answer:
C
Explanation:
just did it
PLZ HELP!
Why do we use ramps (inclined planes) to help us move objects?
Plz nothing from the internet :D
Which characteristic do euglenoids and algae share?
Both are fungus-like protists.
Both can be autotrophic.
Both have whip-like tails.
Both are decomposers.
To solve this we must be knowing each and every concept related to autotroph. Therefore, eugenides and algae, both can be autotrophic. The correct option is option B.
What is autotroph?An creature that can make its own sustenance out of inorganic materials is known as an autotroph. Contrarily, heterotrophs are species that can't make their own nutrition and must eat other organisms in order to survive.
In contrast to autotrophs, heterotrophs are unable to manufacture their own nourishment. Heterotrophs need to consume organic material in order to produce the nutrients needed for life, not inorganic. Eugenides and algae, both can be autotrophic.
Therefore, Eugenides and algae, both can be autotrophic. The correct option is option B among all the given options.
To know more about autotroph, here:
https://brainly.com/question/15458607
#SPJ6
I don't really understand this worksheet question.
What is the percent composition of Phosphorus in Li3PO3
Answer:
you will get 17.983 g of lithium for every 100 g of lithium phosphate.
Explanation:
69.7% is the percent by mass of Lithium in Li[tex]_3[/tex]PO[tex]_3[/tex]. A percent is obtained by multiplying the result by 100.
One approach to show the concentration for an element within a compound or component in a combination is as a mass percentage. The mass percentage is computed by dividing the total weight of the combination by the mass of each component and multiplying the result by 100%. The mass percent is calculated by dividing the mass that contains the compound and solute by the mass for the element or solute.
99.795g/mol = molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex]
6.94g/mol = molar mass of Li
mass percentage of Li=(molar mass of Li/molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex])× 100
=(6.94/99.7)× 100
=69.7%
To know more about mass percentage, here:
brainly.com/question/32197511
#SPJ6
How many elements, compounds and atoms are in CH3COOH
27.2Pb(NO3)2 --> 2Pb0 + 4NO2 + O2
O A. Synthesis
B. Single displacement
C. Decomposition
D. Combustion
1. __N2 + __H2-> __NH3
2. __Fe + __HCl-> __H2 + __FeCl3
Answer:
N2+ 3H2－> 2NH3
2Fe + 6HCl －> 3H2 + 2FeCl3
5. Describe the effects of photons of light on an electron of the hydrogen atom
Answer:
How do atoms give off light?
Atoms emit light when they are heated or excited at high energy levels. The color of light that is emitted by an atom depends on how much energy the electron releases as it moves down different energy levels. ... It shows the electron moving down energy levels.
Explanation:
Which term is defined as the region in an atom where an electron is most likely to be
located?
1.
nucleus
2.
orbital
3.
quanta
4.
spectra
Answer:
"2.Orbital." I think
Explanation:
Risk*
what type of heat transfer takes place when you come in contact with a snow flake on a cold day?
Answer:
Conduction
Explanation:
Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object.
Answer:
Conduction
Explanation:
Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object.
If something is up higher it will have ________________ potential energy.
the same
more
less
Answer:
More
Explanation:
define the clinical thermometer
Answer:
a small medical thermometer with a short but finely calibrated range, for taking a person's temperature.
Answer:
Thermometer which are used in clinical to measure the temperature of human body is called clinical thermometer.
What can help overcome a positive enthalpy of solution and allow a solid
solute to dissolve in water?
A. A decrease in entropy
B. A large amount of energy released
C. A large amount of energy absorbed
D. An increase in entropy
Answer: D. An increase in entropy
Explanation:
Entropy is the measure of randomness or disorder of a system. If a system moves from an disordered arrangement to an ordered arrangement, the entropy is said to increase and vice versa.
For a reaction to be spontaneous, the enthalpy of the solution must decrease and the entropy must increase.
To overcome a positive enthalpy of solution and allow a solid solute to dissolve in water, an increase in entropy would make the reaction spontaneous as the system would move to a more disordered state.
Compare and contrast atoms and molecules. Cite specific examples from the readings, as well as what you may already know, to support your comparison.
Answer:
The main difference between an atom and a molecule lies in the size: while the atom is the smallest unit into which matter can be divided into any of its states, a molecule is the union of a group of atoms, that is, this composed of several atoms. Thus, for example, a water molecule is composed of two hydrogen atoms and one oxygen atom (H2O). Therefore, it can be said that atoms are the smallest unit in which the chemical elements of the world can be divided, while molecules are the particles of matter that are formed through the combination of these elements.
List four greenhouse gases in the atmosphere. For each gas, describe its prevalence in the atmosphere, its natural sources, its human-induced sources, and how its concentration in the atmosphere might be changing.
Answer: Carbon Dioxide, Methane, Nitrous Oxide and Fuorinated Gases
Explanation:Carbon dioxide (CO2): Carbon dioxide enters the atmosphere through burning fossil fuels (coal, natural gas, and oil), solid waste, trees and other biological materials, and also as a result of certain chemical reactions (e.g., manufacture of cement). Carbon dioxide is removed from the atmosphere (or "sequestered") when it is absorbed by plants as part of the biological carbon cycle.
Methane (CH4): Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices and by the decay of organic waste in municipal solid waste landfills.
Nitrous oxide (N2O): Nitrous oxide is emitted during agricultural and industrial activities, combustion of fossil fuels and solid waste, as well as during treatment of wastewater.
Fluorinated gases: Hydrofluorocarbons, perfluorocarbons, sulfur hexafluoride, and nitrogen trifluoride are synthetic, powerful greenhouse gases that are emitted from a variety of industrial processes. Fluorinated gases are sometimes used as substitutes for stratospheric ozone-depleting substances (e.g., chlorofluorocarbons, hydrochlorofluorocarbons, and halons). These gases are typically emitted in smaller quantities, but because they are potent greenhouse gases, they are sometimes referred to as High Global Warming Potential gases ("High GWP gases").
How would you describe the appearance of homogeneous mixture? A. Homogeneous mixtures do not have a uniform composition. B. Homogeneous mixtures have a uniform appearance. C. Homogeneous mixtures are not distributed evenly. D. Homogeneous mixtures have two phases
Answer:
i think its c somebody correct me if im wrong. but hope this help
Explanation:
Explain five physical and/or chemical properties that you need to consider for the substances before using them as construction materials for buildings
Answer: There are many properties of a metal which is taken into consideration when it is used for construction
Explanation:
The properties can be physical, chemical, et cetera. The physical properties that is considered are:
1. Durability: It can be defined as the property of the material to withstand the atmospheric pressure and other factors.
2. Density: The ratio of mass by volume of a material (homogeneous material) is called as density.
3. Fire resistance: The ability of the material to withstand in fire without changing its size or shape.
4. Weather resistance: The ability of the material to withstand the weather which could be variable round the year.
5.Water absorption: The ability of the material to absorb water and retain it.
PLEASE HELPPP!!!!!! ASAP!!!!
Which of the following best describes cations? Question 19 options: A) They're negatively charged because they lost an electron. B) They're positively charged because they gained an electron. C) They're positively charged because the number of electrons remained the same. D) They're positively charged because they lost an electron.
Answer:D
Explanation:trust me bro
Answer:
D
Explanation: I took the test
what kind of chemical bond is established in hydrochloric acid?
Answer and Explanation:
HCl, also known as hydrochloric acid, has a covalent bond. The hydrogen (H) atom shares an electron with the chlorine (Cl) to form the bond.
how many atoms are in 1.50 moles of He?
