Elcft parallelepiped is in an electric field which to the left of the dashed line; has the value Eleft =< -55.37,0,0 > N/C,and Eright =< 55.37,0,0 > N/C to the right of the dashed line_ The top and bottom of the parellelepiped are rectangles Iying in the = plane, and measure /1 by l2, as shown: The left and right faces are rectangles inclined by an angle 0 = 83.489 from the € axis, and measure lz by l3. The values Of L1,l2, and l3 are 23.82 cm, 11.27 cm, and 32.48 cm, respectively. What charge is contained inside the parallelepiped?

A roller coaster starts from rest at point  is option C) the kinetic energy of the coaster at C will be equal to its potential energy at A.

Since Two objects are sliding at the same speed across a wooden surface. The  distance traveled by the second object is option B) 2S

A person's weight measured in the elevator immediately after the elevator starts to fall is option E) zero A force F produces an acceleration a on an object of mass m.

The mass of the second object is option D) (3/8)m.

The amount of kinetic energy change and the amount of potential energy change are identical in all physical processes that take place in closed systems. When the kinetic energy rises, the potential energy falls, and vice versa.

Wave speed is the number of meters a wave travels in a second, or the distance a wave travels in a particular amount of time. Equation Speed = Wavelength x Frequency describes how wave speed relates to wave wavelength and wave frequency.

Therefore, When wavelength and frequency are known potential energy stored energy that depends on the relative positions of different components of a system may be utilized to compute wave speed—this equation can be used to determine wave speed. When stretched or squeezed, a spring has higher potential energy.

Learn more about force from

https://brainly.com/question/14543691
#SPJ1

The length L₂ for destructive interference is  L₂ = 22 m

A sound wave is a mechanical wave which carries sound energy from one point to another.

Since two point sources S₁ and S₂, Which are in phase and emit identical sound waves of wavelength 2.0 m: The length L₁ = 21 m. A listener stands at point P: Assume the amplitude of individual sound reaching at point P does not change, to find L₂, we need to know the path difference for destructive interference.

The path difference for destructive interference is given by ΔL = (n + 1)λ/2

where

Since we require the least intensity, we have the minimum interference. So, n = 0.

So, ΔL = (n + 1)λ/2

ΔL = (0 + 1)λ/2

L₂ - L₁ = λ/2

So, making L₂ subject of the formula, we have

L₂ = L₁ + λ/2

Given that

Substituting the values of the variables into the equation, we have that

L₂ = L₁ + λ/2

L₂ = 21 m + 2.0 m/2

L₂ = 21 m + 1 m

L₂ = 22 m

So, the length L₂ = 22 m

Learn more about destructive interference here:

https://brainly.com/question/14673752

#SPJ1

The maximum acceleration for the belt that the slipping of the crate does not appear is 2 m/s².

what is a belt?

To learn more about belt refer to

https://brainly.com/question/11477019

#SPJ1

According to the given statement 414 nm is the value of the unknown wavelength.

The distance between two wave crests, which also applies to troughs, is known as the wavelength. Cycles per second (Hz), the number of vibrations that pass across a certain region in a second, is used to measure frequency (Hertz). The link between wavelength and frequency is discussed in this article.

For third order maxima,

asinθ  = mλ

asinθ = 3 * 690

The slit width in this instance is a, and the angular spacing is.

The fifth order maximum, meanwhile

asinθ = mλ

asinθ = 5λ

Solving as,

5λ = 3 * 690

λ = 414 nm

Therefore, 414 nm is the value of the unknown wavelength.

To know more about Wavelength visit:

https://brainly.com/question/13533093

#SPJ4

The induced current in the loop of the copper wire is found to be 7.85 mA.

The single loop of the copper wire is lying in flat plane and the magnetic field is pointing perpendicular to the plane of the loop. The area of the loop is given to be 7.8cm²

The magnetic field initially has a magnitude of 0.500 Tesla and it finally increases manner to grow to a magnitude of 3.50 Tesla in a time 1.10 seconds.

The induced EMF in the circuit will be given by the relation,

E = A∆B/∆T

Where,

B is magnetic field,

A is the area and T is the time taken.

Putting all the values,

E = 0.00078×(3.5-0.5)/1.1

E = 21.2mV.

The resistance in the copper loop is given to be 2.7 ohm.

Now, the induced current in the circuit will be given by the relation,

I = E/R

Putting all the values

I = 21.2/2.7

I = 7.85 mA.

So, the induced current in the wire is 7.85 milliamps.

To know more about induced current, visit,

https://brainly.com/question/27605406

#SPJ4

Particles can exist in classically forbidden regions outside the finite square-well potential.

The correct option is D.

In the absence of quantum effects, everything would be continuous, smooth, and completely predictable in the Newtonian sense. However, we may not be here to get bored with this if Planck's constant were 0.

At the atomic scale, the behavior of both particles and waves is described by Planck's constant. One of the factors that led to the creation of quantum mechanics is Planck's constant. It was a surprise when those boundaries also turned to represent the limits where known rules of physics applied since the Planck scaled was developed as an universal set of units.

To know more about Planck constant visit:

https://brainly.com/question/2289138

#SPJ4

The value of 'x' such that the mass то exerts a force of mg on the inclined surface at P. (N=mg)​ is given by

x = N / (mg cos θ)

Generally, To determine the value of 'x', you need to know the angle of inclination of the surface and the mass of the object. The force of gravity (N) acting on the object is equal to the mass of the object (m) multiplied by the acceleration due to gravity (g). The force of gravity is also equal to the normal force (N) exerted by the surface on the object, which is perpendicular to the surface.

If the surface is inclined at an angle θ with respect to the horizontal, the normal force will be equal to the component of the force of gravity along the surface. This component can be calculated using the formula N = mg cos θ, where θ is the angle of inclination and m is the mass of the object.

Therefore, to determine the value of 'x', you need to solve the equation N = mg cos θ for 'x'. To do this, you can rearrange the equation to solve for x:

x = N / (mg cos θ)

Substituting the values of N, m, and θ into this equation will give you the value of 'x' that you are looking for.

Read more about mass of the object.

https://brainly.com/question/6240825

#SPJ1

The distance that the bullet penetrates is 0.03m.

Given data:

The mass of the bullet is

m = 25 g = 0.025 kg

The bullet's initial velocity is

u = 350 m/s

The final velocity of the bullet is

v = 0

The average force opposing the motion is

F = 50000N

From Newton's second law, the acceleration derived as,

F = m. a.

a = F. m..........(1)

Substituting values in equation (1), we get:

a = 50000 N / 0.025 kg = 2×106 m/s 2

The equation of motion is,

v 2=u 2−2 a S

2 a S=u 2−v 2

S = u 2−v 2/2 a.......(2)

Substituting values in equation (2), we get:

S = (350 m/s)2−0/2(2×106 m/s 2)

 =12.25×104 m/s 4×106 m/s 2=0.03m

here, the distance that bullet penetrates is 0.03m.

Kinetic energy has the following formula: K.E. = 1/2 m v 2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kg/m per second squared if the mass is measured in kg and the velocity is measured in meters per second.

Radiant, thermal, electrical, and mechanical kinetic energies are the basic categories.

Learn more about kinetic energy here:

https://brainly.com/question/17858145

#SPJ1

(A) With 268.94 N tension must she stretch it.

26% increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D.

Part (A)

Fundamental frequency =f0= 65.4 Hz.

The length of the vibrating portion of the string = l = 0.615 m

Mass= m = 14.8 g

We know, [tex]f_0 = \frac{v}{2l}[/tex]

So, the value of v will be 65.4*2*0.615 = 80.442 m/s

As, We know,

[tex]T=\frac{v^2}{\frac{m}{l}}[/tex]

So, the value of tension will be: [tex]\frac{80.442^2}{\frac{14.8}{0.615}}=\frac{6470.91}{24.06}=268.94\:N[/tex]

Part (B)

Fundamental frequency =f0= 73.4 Hz.

The length of the vibrating portion of the string = l = 0.615 m

Mass= m = 14.8 g

We know, [tex]f_0 = \frac{v}{2l}[/tex]

So, the value of v will be 73.4*2*0.615 = 90.282 m/s

As, We know,

[tex]T=\frac{v^2}{\frac{m}{l}}[/tex]

So, the value of tension will be: [tex]\frac{90.282^2}{\frac{14.8}{0.615}}=\frac{8150.8395}{24.06}=338.77\:N[/tex]

So, the percentage increase in tension will be [tex]\frac{338.77-268.94}{268.94}\times 100\%=25.96\% \approx 26\%[/tex]

For more questions on Fundamental frequency https://brainly.com/question/1967686

#SPJ4

The complete question should be:

a cellist tunes the c-string of her instrument to a fundamental frequency of 65.4 hz. the vibrating portion of the string is 0.615 m long and has a mass of 14.8 g .

Part A: With what tension must she stretch it?

Part B

What percent increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D?

The degeneracies of the first, fourth and fifth energy levels for the three dimensionsal cubical box are 1, 3 and 1.

Calculation :

Given Data

A three-dimensional cubic box with

lx=ly=lz=Li.

For a 3D cubic box, the energy of the particle in a box is having a formula given below,

E3D=h²8m(n²x/l²x+n²y/l²y+n²z/l²z)

Given,

lx=ly=lz=Li, put in the above equation, we get,

E3D=h²/8m(n²x/L²+n²y/L²+n²z/L²)

E3D=h²/8mL²(n²x+n²y+n²z)

Now, for the First energy level, the energy will be,

E3D=h²/8mL²(1²+1²+1²)

E3D=3h²/8mL²

The degeneracy is equal to 1 because nx=ny=nz=1.

Now, for the Fourth energy level, the energy will be,

E3D=h²/8mL²(1²+1²+3²)

E3D=h²/8mL²(1+1+9)

E3D=11h²8mL²

The degeneracy is equal to 3 because, nx=1,ny=1,nz=3,nx=1,ny=3,nz=1 and nx=3,ny=1,nz=1.

Now, for the Fifth energy level, the energy will be,

E3D=h²/8mL²(2²+2²+2²)

E3D=h²/8mL²(4+4+4)

E3D=12h²/8mL²

The degeneracy is equal to 1 because nx=2,ny=2,nz=2.

Therefore, the degeneracies of the first, fourth and fifth energy levels are 1, 3 and 1.

Energy levels are degenerate if they correspond to two or more different measurable states of a quantum system. Conversely, two or more distinct states of a quantum mechanical system are said to be degenerate if they have the same energy value when measured. The number of different states corresponding to a particular energy level is called the degeneracy of the level.

Learn more about degeneracy energy levels here : https://brainly.com/question/14439838

#SPJ4

The maximum torque on the wire is 392.3 µN·m and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)

Torque: Torque is a measure of the force that can cause an object to rotate about an axis. It is a vector quantity.

Given that,

diameter D=20cm

Radius r =10cm

magnetic field B =2.5mT

current I=5A

Torque= n×B

           =nBsinФ

torque=nB= NIAB

                 = 1×5×π×[tex]10^{2}[/tex]×[tex]10^{-4}[/tex]×2.5×[tex]10^{-3}[/tex]

                 = 39.23×[tex]10^{-5}[/tex]

                 = 392.3µN·m

minimum potential energy= -nB= -392.3µN·m

maximum potential energy =+nB= +392.3µN·m

Therefore the maximum torque on the wire is 392.3 µN·m when is placed in an uniform magnetic field of 2.50mT and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)

Learn more about torque:

https://brainly.com/question/20691242

#SPJ4

The spring and pan have very little mass. The mass executes a SHM when it is lightly squeezed and then released.

Forces, location, velocity, and energy—both kinetic and potential energy—are some examples of these quantities. Hoare's Rule. Energy conservation: When the compressed spring returns to its natural length, all of the energy that was stored in it is transformed into kinetic energy. The block is propelled along a horizontal surface as the spring is let go. Friction and the spring's bulk can be disregarded. Between two blocks with masses of 1 kg and 2 kg that are lying on a smooth horizontal surface is a compressed elastic spring. The block is freed from rest once the spring has been compressed by 2.0 cm.

to know more about spring please visit.

https://brainly.com/question/14159361

#SPJ4

Option B is Correct

The velocity of the center of mass remains constant before the collision, when they collide there is a slight decrease in kinetic energy of the system since the collision is inelastic, resulting in a slight decrease of velocity, afterwards the velocity is constant again.

Velocity is the directional velocity of a moving object, observed from a given frame of reference and indicating the rate of change of position measured at a given time reference (eg 60 km/h northward). Velocity is a fundamental concept in kinematics, a branch of classical mechanics that describes the motion of bodies.

Velocity is a physical vector quantity. Both magnitude and direction are required to define it. The scalar absolute value (magnitude) of velocity is called velocity, and its magnitude is a consistent derived unit measured in the SI (metric) system as meters per second (m/s or m⋅s−1). For example, " meters/second" is a scalar, but "5 meters/second east" is a vector. An object is said to be accelerating if its velocity, direction, or both change.

Learn more about velocity here : https://brainly.com/question/24445340

#SPJ4

Combination of swimming and biking times that meets distance and the time constraints in this situation is s + b ≤ 2. An inequality that represents  number of gift items that Elena needs is : 3b+5n≤30.

If athletes train for not more than 2 hours a day, then the sum of the hours training swimming 'a' and biking 'b' should be less than or equal to 2. Hence, we can write the following inequality:

s + b ≤ 2

Inequality that represents Mai's statement is:

s + b ≤ 2

Part 2:

It is given that , bracelets cost $3, necklaces cost $5 and she can spend not more than $30

Then the inequality that represents the number of gift items that Elena needs :  3b+5n≤30

To know more about inequality equation, refer

https://brainly.com/question/11234618

#SPJ1

The intensity pattern visible on a screen behind the slits can be stated to depend on the screen's distance (d=1.168m).

From the question we are told,

Two slits that are 0.20 mm apart are illuminated by 650 nm light. The intensity pattern shown on a screen behind the slits is depicted in (Figure 1).

Typically, the mathematical formula for the distance is as follows:

[tex]d = \sqrt{(x_2 - x_1)^2 + (y_2-y_1)^2}[/tex]

d=0.33x10^-2x0.23x10^-3/650x10^-9

d=1.168m

The distance formula is a formula used to determine how far apart two places are from one another. The dimensions of these points are unlimited. For instance, you could need to determine the separation between two points in space, a plane, or a line (1, 2, or 3 dimensions) (3d).

Distance is the overall, directionless movement of an object. Distance can be characterized as the amount of space an object has covered, regardless of the starting or ending location.

Learn more about distance here:

https://brainly.com/question/26711747

#SPJ4

Answer: m = 72 kg

Explanation:

A basketball experiences four forces as it soars through the air. The ball is being pulled down to the Earth by gravity, being propelled upward by buoyancy, and slowed down due to the drag force created by the air it collides with.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

For instance, a basketball will strike the ground hard when it is dribbled. The ground's force on the ball is balanced by this force of the ball on the ground. The ball is sent upwards by the second force since it acts in the opposite direction. There are numerous characteristics of motion that depend on this interaction.

Thus, A basketball experiences four forces as it soars through the air.

To learn more about force, follow the link;

https://brainly.com/question/13191643

#SPJ1

Note that for a severe supercell ts to form over the great plains, one would expect the 5,000 AGL wind to be 190/45kts (Option D)

A supercell thunderstorm is distinguished by the presence of a mesocyclone, which is a deep, continually revolving updraft. As a result, these storms are sometimes known as spinning thunderstorms.

Supercells are storms that have updrafts that spin along a vertical axis and are generally but not always thunderstorms. This rotation is caused by shear in the environmental wind field (a change in wind direction and/or speed with height) that surrounds the storm as it grows.

Supercell thunderstorms are intense, long-lived storms that are characterized by strong wind shear and rotational dynamics.

The wind shear, or the change in wind speed and direction with height, is a key factor in the development and maintenance of supercell thunderstorms.

Note that AGL means Above Ground Level; while

KTS means Knots. Knots are a unit measurement of speed. I nautical mile is usually equated to one knot.

Learn more about Supercells;
https://brainly.com/question/401575?
#SPJ1

The following vectors best describes the path of the airplane Aniseed of the as plan is 528 [tex]\mathrm{mi} / \mathrm{hr}[/tex]

What is airplane?

A fixed-wing aircraft that is pushed forward by the thrust of a jet engine, propeller, or rocket engine is known as an aeroplane or aeroplane. There are many different sizes, forms, and wing arrangements for airplanes.

[tex]\text { bearing } 25^{\circ} \text { west of north }[/tex]

[tex]\text { Since } \quad 90^{\circ}+25^{\circ}=115^{\circ}[/tex]

[tex]\text { so path of the airplane is }[/tex]

[tex]\left.v=528 \cos \left(i 15^{\circ}\right) i+528 \sin \left(115^{\circ}\right)\right][/tex]

To learn more about airplane visit

https://brainly.com/question/17247837

#SPJ4

The amplitude is 0.25s.

Calculation:

Amplitude = A = 0.225 m

Angular frequency = w = 8π rad/s.

Frequency = f = w/2π = 8π/2πHZ = 4 HZ

Time period = T = 1/f = (1/4)s = 0.25s.

The maximum displacement or distance traveled by a point on an oscillating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. Amplitude difference between a rest position and maximum shaft deflection.

Frequency The number of waves passing a particular point per second. Duration  How long it takes for a wave cycle to complete. Sound wave amplitude is a measure of wave height. The amplitude of a sound wave can be defined as the magnitude or loudness of the maximum displacement from the average position of the vibrating particles in the medium when the sound was produced.

Learn more about The amplitude here:- https://brainly.com/question/3613222

#SPJ4

Air resistance is hardly noticeable. true regarding the 0.09-kilogram component. This causes 0.01kg to land farther from the launch site than 0.09kg did.

0.09kg will move to the west due to momentum conservation (opposite of 0.01 kg). Additionally, since both are at the same height above the ground, it will take them equal amounts of time to descend to the ground.

Allowing v to be the speed of 0.01 kg, which means that the speed of 0.09kg will be smaller than 0.01 kg,

0.01v - (0.09)V = 0

V = 0.01 v/ 0.09 = 0.111v

The speed of 0.09 kg = 0.111v

The speed of 0.09 kg is less than 0.01kg.

Because of this, 0.01kg hits the ground farther from the launch point than 0.09kg did.

The amount of resistance in an electrical circuit represents the resistance to current flow. The Greek letter omega (), which represents resistance, represents ohms. German physicist Georg Simon Ohm (1784–1854), who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.

Resistance measurements are typically performed in order to evaluate the health of a component or a circuit.

Current flow is inversely correlated with resistance. Conductor damage from corrosion or burning could be one of several potential causes if it is extremely high.

Learn more about resistance here:

https://brainly.com/question/17010736

#SPJ4

When a function p(x) determines location, the velocity and acceleration are its first and second derivatives, respectively.

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2). Since acceleration is a vector quantity, both its magnitude and its direction are included. The speed and direction of an object's motion are its velocity. Alternatively put, velocity is the pace at which an object's position changes (where position incorporates direction by specifying whether the object is moving backwards or forwards on a line, or moving sideways or up and down in two or three dimensions).

to know more about acceleration please visit.

https://brainly.com/question/12550364

#SPJ4

The electric field strength in volts per meter is calculated to be 4.095 V/m.

Given that, speed v = 3.9 * 10 m/s

Magnetic field B = 0.105 T

Using the mass spectrometer velocity selector relationship between the electric field and magnetic field is,

v = E/B

Where,

v is the speed selector

B is magnetic field

E is electric field

Therefore, E = vB

E = 3.9 × 10 × 0.105

E = 4.095 V/m

Thus, electric field E is 4.095 V/m.

The question is incomplete. The complete question is 'What is the electric field strength in volts per meter?'

To know more about electric field:

https://brainly.com/question/15414535

#SPJ4

The velocity of the sailboats at sailed a distance of 81 km is 12.5 m/s.

Velocity is the rate of change of displacement.

To calculate the velocity of the sailboats, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the velocity is 12.5 m/s.

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

1.25 cm is the height of the image. 160 cm separates a converging lens with such a 40 cm focal length from a diverging lens with the a -40 cm focal length. The converging lens is 60 cm away from a 2.5 cm tall item.

A lens that conforms a parallel source beam of light is known as a converging lens. One kind of converging lens is a double convex lens. Converging Lens A lens that separates a parallel light beam is known as a diverging lens. Diverging lenses include those that are double concave.

For the diverging lens, this image height corresponds to object height. We obtain h ′D=(20cm40cm)(5.0cm)=1.25cm again for diverging lens as a result.

To know more about  converging lens visit:

https://brainly.com/question/28348284

#SPJ4

This statement is False because Solid-state sensors are used in place of a water - absorbing element in electronic humidistats. A damper in the bypassed duct is closed during the summer period to stop airflow.

Hygroscopy - A material is said to be hygroscopic if it has the capacity to adsorb and retain water or water from its immediate surroundings. Examples include ethanol, glycerin, concentrated sulfuric acid, honey, silica gel, and methanol.

Around the soil particles, some water in the soil creates an incredibly thin, firmly held layer. It's referred to as hydroscopic water. A little amount of water in the soil is chemically linked to soil components in the soil. We refer to it as mixed water.

To know more about hygroscopic visit:

https://brainly.com/question/15743598

#SPJ4

It is easy to measure the period using the photogate timer.

Photogate timer is used to study free fall, rolling objects, collisions, and pendulums. Photogates allow for extremely accurate timing of events within physics experiments, for studying free fall, air track collisions, pendulum periods, the speed of a rolling object, among other things.

To measure the period of a simple pendulum, we set the simple pendulum into oscillation. Let's say 10 oscillations. The time to complete this oscillation is recorded. This time is divided by the no of oscillation to get the period. Period is also measured in second.

This means that period of a simple pendulum is given as T = t/n

where T is the period and t is the time to complete a given oscillation.

learn more about photogate timer from

https://brainly.com/question/2456688

#SPJ1

When the gymnast starts to jump his potential energy starts to convert to kinetic energy. But when he reaches the maximum height and stop there for seconds, potential energy regains. Thus, option C is correct.

Potential energy of an object is the energy stored in it by virtue of its position. Potential energy increases with increases in mass and height which is clear from the equation for potential energy

p = mgh

Kinetic energy is generated by motion of the object. Thus, only a moving body attains a kinetic energy. Kinetic energy depends on the mass and velocity of the object.

Here, the gymnast gains a kinetic energy when he starts to jump from rest. But, when he reaches the maximum height where the speed slows down, his kinetic energy converts to potential energy. Thus, option C is correct.

To find more on kinetic energy, refer here:

https://brainly.com/question/26472013

#SPJ1

#SPJ1

Your question is incomplete. But your complete question probably was:

A gymnast uses a flexible stick to jump over the bar. Which of the following

describes energy changes when he reaches the highest point of his jump?

A) kinetic- potential- potential

B) kinetic- potential- kinetic

C) potential - kinetic – potential

D) potential- potential- kinetic

The smooth plastic jar has five pennies placed inside of it. The normal reactions of the bottom coin on the container at locations a and b will be 0.0705 lb and 0.1175 lb respectively if each coin weighs 0.0235 lb.

A contact force, the normal force is often referred to as the normal reaction force. On two surfaces that are not attached to one another, a normal force cannot be applied.

The body's weight determines the usual deceleration force. A body's position relative to the ground tells us when it is about to fall. The normal force is the portion of a force that is perpendicular to any contact surface.

To learn more about normal force visit:

brainly.com/question/13340671

#SPJ4

The transverse velocity of the particle at x=0 when t=5.0 s is 2.5 cm/s.

y(x,t) = ymsin(kx +- wt + Ф)

(a). At t =0 , y verses x is positive sine function

(b). Ym = y5 = 4 cm

(c). k = 2Π/λ = (2*3.14)/20 = 0.314 rad cm⁻¹

(d). w = 2Πf  = 2Π/T = (2*3.14)/10 = 0.628 rad/sec

(e). since at t =0 , x= 0

                     y = Ym sinΦ

                      but y = 0 from graph  

                       sinΦ = 0   Φ=0

(f). sin in front of w is 't'

(g) . speed = v= w/k = 0.628/0.314 = 2cm/s

(h) .  at x = 0

   y = ym sinwt

  vy = dy/dt= wym constant

  = 0.628*4*cos(0.628*5)

vy = 2.5 cm/s

Wavelength is the spatial period of a periodic wave, i.e. the distance over which the wave shape repeats. [1][2] This is the distance between successive corresponding points of the same phase in the wave. B. Two adjacent peaks, valleys, or zero crossings, characteristic of both traveling and standing waves and other spatial wave patterns.

The reciprocal of wavelength is called spatial frequency. Wavelength is usually represented by the Greek letter lambda (λ). The term wavelength is also sometimes applied to the sinusoidal envelope of modulated waves and waves formed by interference of modulated waves or multiple sinusoids.

Learn more about wavelength here : https://brainly.com/question/10728818

#SPJ4