electron affinity of lithium is -60 whereas of cesium is -45.this trend is due to... plz give me accurate answer

Answer:

False

Explanation:

Roman numerals are seen in the names of several compounds. They often appear immediately after the name of central atom in the molecule.

These Roman numerals are used to depict the oxidation state of the central atom in the molecule and not to show how many of that ion appear in the formula.

For instance, in carbon IV oxide, the Roman numeral IV shows that the central atom in the compound-carbon is in the +4 oxidation state.

Answer:

if it is pure, the substances is either an element or a compound. if a substance is not chemically pure, it is either a heterogeneous mixture or a homogeneous mixture. if its composition is uniform throughout, it is a homogeneous.

Answer:

a) 0.15 mol.

b) 8.95 g.

Explanation:

Hello there!

In this case, according to the given information, it is possible for us to infer this problem is solved by using the ideal gas equation:

[tex]PV=nRT[/tex]

And proceed as follows:

a) Here, we solve for the moles, n,  as follows:

[tex]n=\frac{PV}{RT} \\\\n=\frac{0.50atm*4.5L}{0.08206\frac{atm*L}{mol*K}*178K} \\\\n=0.15mol[/tex]

b) for the calculation of the mass, we recall the molar mass of butane, 58.12 g/mol, to obtain:

[tex]0.15mol*\frac{58.12g}{1mol} =8.95g[/tex]

Regards!

Answer:

Al°(s)  + 3Ag⁺(aq) => Al⁺³(aq) + 3Ag(s)

Explanation:

Oxidation:                            Al°(s) =>   Al⁺³(aq) + 3e⁻

Reduction:           3Ag⁺(aq) + 3e⁻ => 3Ag°(s)

_________________________________________

Net Rxn:           Al°(s)  + 3Ag⁺(aq) => Al⁺³(aq) + 3Ag(s)

One mole of neutral aluminum atoms (Al°(s)) undergo oxidation delivering 3 moles  of electrons to 3 moles silver ions (3Ag⁺³(aq)) that are reduced to 3 moles of neutral silver atoms (3Ag°(s)) in basic standard state 25°C; 1atm.

A balanced equation obeys the law of conservation of mass. According to the law of conservation of mass, mass can neither be created nor be destroyed. The coefficient of silver is 3.

A balanced chemical equation can be defined as the chemical equation in which the number of reactants and products on both sides of the equation are equal. The amount of reactants and products on both sides of the equation will be equal in a balanced chemical equation.

The numbers which are used to balance the chemical equation are called the coefficients. The coefficients are the numbers which are added in front of the formula.

The balanced chemical equation for the given redox reaction is given as:

Al (s) + 3 Ag⁺ (aq)  → Al³⁺ (aq) + 3Ag (s)

Thus the coefficient of silver is 3.

To know more about balanced equation, visit;

https://brainly.com/question/29769009

#SPJ7

Answer:

NaOH is the limiting reactant.

Explanation:

Hello there!

In this case, since the reaction taking place between sodium hydroxide and chlorine has is:

[tex]NaOH+Cl_2\rightarrow NaCl+NaClO+H_2O[/tex]

Which must be balanced according to the law of conservation of mass:

[tex]2NaOH+Cl_2\rightarrow NaCl+NaClO+H_2O[/tex]

Whereas there is a 2:1 mole ratio of NaOH to Cl2, which means that the moles of the former that are consumed by 0.85 moles of the latter are:

[tex]n_{NaOH}=0.85molCl_2*\frac{2molNaOH}{1molCl_2}\\\\n_{ NaOH}=1.7molNaOH[/tex]

Therefore, since we just have 1.23 moles out of 1.70 moles of NaOH, we infer this is the limiting reactant.

Regards!

Answer:

Group 1A: alkali metals, or lithium family.

Group 2A: alkaline earth metals, or beryllium family.

Group 7A: the manganese family.

Group 8A: the iron family.

Explanation:

Answer:

1A: Alkali Metals

2A: Alkaline Earth Metals

7A: Halogens

8A: Noble Gases

Answer:

2NaCl + CuCO3

FeCl2 + BaSO4

CuCO3 + Ca(NO3)2

Explanation:

Presumably this is a double replacement reaction.

A+B + C+D → A+D + C+B

It seems I may be wrong so please try to work out the problem yourself to double check, keeping in mind the charges of each compound.

Answer:

The maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water = 94.9%

Note: The question is incomplete. A similar but complete question is given below:

The solubility of benzoic acid in water is 6.80g per 100mL at 100 degrees C and 0.34 g per 100mL at 25 degrees C.

Calculate the maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water, assuming the solution is filtered at 25 degrees C.

Explanation:

Solubility of benzoic acid in water at 100 degrees C = 6.80g per 100mL

Solubility of benzoic acid in water  at 25 degrees C =  0.34 g per 100mL

Mass of benzoic acid to be theoretically recovered from 100 mL of water = 6.80 g - 0.34 g = 6.46 g

At 25 degrees;

0.34 g of benzoic acid is present in 100 mL of water

x g of  benzoic acid will be present in 15 mL of water

x = 0.34 × 15 / 100 = 0.051 g

Mass of benzoic acid to be theoretically recovered from 25 mL of water = 1.00 g - 0.051 g = 0.949 g

Maximum theoretical percent recovery = (mass recovered / original mass dissolved) x 100%

Maximum theoretical percent recovery =  (0.949 / 1.00) × 100% = 94.9 %

Therefore, the maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water = 94.9%

Answer:

Laws governing gas behavior.

Explanation:

Boyle's law:

It relates the pressure and volume of an ideal gas at a constant temperature.

According to this law:

"The volume of a fixed amount of gas at constant temperature is inversely proportional to its pressure".

[tex]P \alpha V[/tex].

Charle's law:

It relates the volume and absolute temperature of an ideal gas at a constant pressure.

According to this law:

"The volume of a fixed amount of gas at constant pressure is directly proportional to its absolute temperature".

[tex]V \alpha T[/tex].

Avogadro's law:

According to this law:

equal volumes of all gases under the same conditions of temperature and pressure contain, an equal number of moles.

[tex]V \alpha n[/tex].

Ideal gas equation:

By combining all the above-stated gas laws, this equation is formed as shown below:

[tex]V \alpha \frac{nT}{P} \\=> V= R. nT/ P\\=>PV=nRT[/tex]

R is called universal gas constant.

It has a value of 0.0821L.atm.mol-1.K-1.

Answer:

Boyle's law, Charle's law,  Guy Lussac's law and Avogadro's law

Explanation:

All the gases behaves similarly when the environment conditions are normal. But when the physical condition changes like when the pressure, volume or temperature changes, the gas behaves differently and shows a deviation.

The number of gas laws are :

Boyle's Law

Boyle's law states that when the temperature remaining constant, the pressure of the gas varies inversely to the volume of the gas.

i.e.   [tex]P \propto \frac{1}{V}[/tex]

Charle' law

Charle's law states that when pressure is constant, the temperature of a gas is directly proportional to the volume.

i.e. , [tex]$T \propto V$[/tex]

Gay Lussac's law

Gay - Lussa law states the volume and the mass of the pressure of the gas is directly proportional to the  temperature of the gas.

i.e. P.T = constant

Avogadro's law

It states that under the conditions of same pressure as well as temperatures, the gases having equal volumes will have same numbers of molecules.

i.e. [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex] = constant

Answer:

B

Explanation:

AH is positive so the forward reaction is endothermic. Thus, increasing temperature would cause equilibrium to shift to the right as endothermic reaction favors higher temperature. This increases the yield of NO.

Answer:

a

Explanation:

Answer:

3.59x10⁻⁴ mol

Explanation:

Assuming ideal behaviour we can solve this problem by using the PV=nRT formula, where:

We input the data given by the problem:

And solve for n:

Answer:

[tex]Key=2.5x10^{-9}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to calculate the equilibrium constant value for the reverse reaction:

[tex]2CO_2(g) \rightleftharpoons 2CO(g) + O_2(g)[/tex]

By knowing that the equilibrium expression is actually:

[tex]Key =\frac{[CO]^2[O_2]}{[CO_2]^2} =\frac{1}{Keg}[/tex]

Thus, we plug in and solve for the inverse of Keq to obtain Key as follows:

[tex]Key =\frac{1}{4.0x10^{-10}}\\\\Key=2.5x10^{-9}[/tex]

Regards!

Answer:

–0.13 Pa.m²

Explanation:

From the question given above, the following data were obtained:

Measurement (Pa.mm²) = –1.3×10⁵ Pa.mm²

Measurement (Pa.m²) =?

We can convert from Pa.mm² to Pa.m² by doing the following:

1 Pa.mm² = 1×10¯⁶ Pa.m²

Therefore,

–1.3×10⁵ Pa.mm² = –1.3×10⁵ Pa.mm² × 1×10¯⁶ Pa.m² / 1 Pa.mm²

–1.3×10⁵ Pa.mm² = –0.13 Pa.m²

Thus, –1.3×10⁵ Pa.mm² is equivalent to –0.13 Pa.m².

The complete equation will be:

[tex](-1.3\times 10^5 Pa.mm^2)\times 10^{-6}=(-0.13) Pa.m^2[/tex]

Explanation:

Given:

The equation to convert a measurement:

[tex](-1.3\times 10^5 Pa.mm^2)\times ? = ? Pa.m^2[/tex]

To find:

The missing part of the equation.

Solution:

[tex](-1.3\times 10^5 Pa.mm^2)\times ? = ? Pa.m^2[/tex]

On LHS the unit is in [tex]Pa. mm^2[/tex] and RHS the unit is in [tex]Pa.m^2[/tex] which means that we have to convert [tex]mm^2[/tex] to [tex]m^2[/tex]

In 1 millimeter there are 0.001 meters.

[tex]1 mm = 0.001 m\\1 mm^2=0.000001 m^2=10^{-6} m^2[/tex]

So, the complete equation will be:

[tex](-1.3\times 10^5 Pa.mm^2)\times 10^{-6}=(-0.13) Pa.m^2[/tex]

Learn more about conversions here:

brainly.com/question/24530464

brainly.com/question/17743460

Answer:

yes

Explanation:

cos of high electron transfer

Explanation:

C4H10 + 13/2O2 ---------> 4CO2 + 5H2O

so u can work out the amount of moles by doing

moles=mass/mr

mr of C4H10 is 12 × 4 + 10 =58

=7.269/58

= 0.125moles

Then u can use the molar ratio which is

6.5:4

0.125 ÷6.5 × 4 = 0.0769moles

hope this helps:)

Answer:

Explanation:

fluorine have gained one electron that is why the sign is -1. they both have different number of protons. They have different neutron numbers. F have 10 and O have 8.

hope this helps :)

Explanation:

this explanation may help u to understand:)

Answer:

Q was < K. Partial pressure of hydrogen decreased, iodine increased

Explanation:

After iodine was added the Q was [Select] K so the reaction shifted toward the Products [Select] ,The partial pressure of hydrogen [Select], Iodine [Select] |,and hydrogen iodide Decreased

Based on the equilibrium:

H2(g) + I2(g) ⇄ 2HI(g)

K of equilibrium is:

K = [HI]² / [H2] [I2]

Where [] are concentrations at equilibrium

And Q is:

Q = [HI]² / [H2] [I2]

Where [] are actual concentrations of the reactants.

When the reaction is in equilibrium, K=Q.

But as [I2] is increased, Q decreases and Q was < K

The only concentration that increases is [I2], doing partial pressure of hydrogen decreased, iodine increased

There will be no oxygen in the product. Some of the oxygen will evaporate into the air.

Answer:

according to the path shown in the figure it will start decreasing then again it will start increasing when the path will be nearer to the star.

Reason is gravitation force is indirectly proportional to the distance.

So, option B. decrease then increase is correct

Answer:

Option 1. NO

Explanation:

The balanced equation for the reaction is given below below:

4NH₃ + 6NO —> 5N₂ + 6H₂O

From the balanced equation above,

4 moles of NH₃ reacted with 6 moles of NO.

Finally, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

4 moles of NH₃ reacted with 6 moles of NO.

Therefore, 1.24 moles of NH₃ will react with = (1.24 × 6)/4 = 1.86 moles of NO

From the calculation made above, we can see that a higher amount of NO (i.e 1.86 moles) than what was given (i.e 1.79 moles) is needed to react completely with 1.24 moles of NH₃.

Therefore, NO is the limiting reactant and NH₃ is the excess reactant.

Thus, the 1st option gives the correct answer to the question

Answer:

1. NO .

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to identify the limiting reactant by simply calculating the moles of any product, say N2, via the moles of each reactant and including the corresponding mole ratio (4:5 and 6:5):

[tex]1.24molNH_3*\frac{5molN_2}{4molNH_3}=1.55molN_2 \\\\1.79molNO*\frac{5molN_2}{6molNO}=1.50molN_2[/tex]

Thus, since NO yields the fewest moles of N2 product, we infer it is the limiting reactant.

Regards!

Answer: Volume occupied by 3.00 moles of oxygen gas under the same condition is 3.75 L.

Explanation:

Given: [tex]n_{1}[/tex] = 4.00 moles,          [tex]V_{1}[/tex] = 5.0 L

[tex]n_{2}[/tex] = 3.00 moles,                 [tex]V_{2}[/tex] = ?

Formula used is as follows.

[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\\frac{5.0 L}{4.00 mol} = \frac{V_{2}}{3.00 mol}\\V_{2} = 3.75 L[/tex]

Thus, we can conclude that volume occupied by 3.00 moles of oxygen gas under the same condition is 3.75 L.

Answer:

D. the minerals they contain

Hope this answer is right!!

Answer:

Starch.

Explanation:

When the triiodide combine with starch, it forms dark blue colour. Amylose in starch is responsible for the occurrence of a deep blue color when the iodine is combine with the starch. The iodine molecule goes inside of the amylose coil which makes a linear triiodide ion complex that goes into the coil of the starch that leads to an intense blue-black color in the end so we can say that starch turns the colour into blue.

Answer:

[tex]pH = - log[H {}^{ + } ] \\ = - log(0.0000067) \\ pH = 5.17[/tex]

Answer:

D) a four-fold increase

Explanation:

According to Gay-Lussac's law, which states that the pressure of a given amount of gas is directly proportional to the temperature at a constant volume, the pressure increases with an increase in temperature.

According to this question, at a fixed volume, a four-fold increase in the temperature of a gas will lead to a four-fold increase in the pressure as well.

Answer:

the Rhyniognatha hirsti

Explanation:

at age 400 million years old

Answer:

[tex]\%m=66.7\%[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to calculate the concentration of the solution obtained, by knowing 20 mL of water are the same to 20 g and therefore the mass of the solution is 40g+20g=60g.

Next, we apply the following equation to obtain the required concentration:

[tex]\%m=\frac{40g}{60g} *100\%\\\\\%m=66.7\%[/tex]

Regards!