Energy from the Sun is transferred from the Earth’s surface to the atmosphere, resulting in
atmospheric convection currents that produce winds. How do physical properties of the air
contribute to convection currents?

a -The warmer air sinks because it is more dense than cooler air.
b -The warmer air rises because it is more dense than cooler air.
c- The warmer air sinks because it is less dense than cooler air.
d -The warmer air rises because it is less dense than cooler air.

Answers

Answer 1
Energy from the sun is important so the correct answer is c
Explanation

Related Questions

a wooden block is cut into two pieces, one with three times the mass of the other. a depression is made in both faces of the cut so that a fire cracker can be placed in it and the block is reassembled. the reassembled block is set on rough surface and the fuse is lit. when the fire cracker explodes, the two blocks separate. what is the ratio of distances traveled by blocks?

Answers

Answer:

1/9

Explanation:

Let A denote the bigger piece and let B denote the smaller piece.

We are told that one with three times the mass of the other.

Therefore, we have;

M_a = 3M_b

Firecracker is placed in the block and it explodes and thus, momentum is conserved.

Thus;

V_ai = V_bi = 0

Where V_ai is initial velocity of piece A and V_bi is initial velocity of piece B.

Since initial momentum equals final momentum, we have;

P_i = P_f

Thus;

0 = (M_a × V_af) + (M_b × V_bf)

Since M_a = 3M_b, we have;

(3M_b × V_af) + (M_b × Vbf) = 0

Making V_af the subject, we have;

V_af = -⅓V_bf

The kinetic energy gained by each block during the explosion will later be lost due to the negative work done by friction. Thus;

W_f = -½M_b•(v_bf)²

Now, let's express the work is in terms of the force and the distance.

Thus;

W_f = F_f × Δx × cos 180°

Frictional force is also expressed as μmg

Thus;

W_f = -μM_b × g × Δx

Earlier, we saw that;

W_f = -½M_b•(v_bf)²

Thus;

-½M_b•(v_bf)²= -μM_b × g × Δx

Δx = (v_bf)²/2μg

Let the distance travelled by block A be Δx_a and that travelled by B be Δx_b

Thus;

Δx_a/Δx_b = ((v_ba)²/2μg)/((v_bf)²/2μg)

Δx_a/Δx_b = ((v_af)²/((v_bf)²)

Δx_a/Δx_b = (-⅓V_bf)²/(V_bf)²

Δx_a/Δx_b = 1/9



1. (6x + 8)(5x - 8)
a. 30x2 + 49x + 20
2. (5x + 6(5x - 5)
b. 24x3 + 8x2 + 6x + 4
3. (6x + 3)(6x - 4)
c. 25x2 + 5x - 30
4. (6x + 5)(5x + 5)
d. 30x2 - 8x - 64
e. 36x2 - 6x - 1
5. (4x + 2) (6x2 - x + 2)​

Answers

Answer:

form 1 question??????????

How could a change in straight line motion due to unbalanced forces be predicted from an understanding of inertia?

Answers

Answer:

If the force goes in the direction of movement, the speed must increase and if the net force goes in the opposite direction, the speed must decrease.

Explanation:

The principle of inertia or Newton's first law states that every body remains static or with constant velocity if there is no net force acting on it.

Based on this principle, if we have a net force, the velocity of the body changes by having an unbalanced force acting.

If the force goes in the direction of movement, the speed must increase and if the net force goes in the opposite direction, the speed must decrease.

While investigating Kirchhoff's Laws, you begin observing a blackbody, such as a star, from Earth using advanced technology that can analyze spectra. While pointing it at the star with nothing between you and the star, you observe a full spectrum. You come back and repeat this same experiment a year later using the same star, except this time you observe an absorption spectrum. What is the most likely explanation for this

Answers

Answer:

the second time there is a gas between you and the star,

Explanation:

When you observe the star for the first time you do not have a given between you and the star, therefore you observe the emission spectrum of the same that is formed by lines of different intensity and position that indicate the type and percentage of the atoms that make up the star.

 When you observe the same phenomenon for the second time there is a gas between you and the star, this gas absorbs the wavelengths of the star that has the same energies and the atomisms and molecular gas, therefore these lines are not observed by seeing a series of dark bands,

The information obtained from the two spectra is the same, the type of atoms that make up the star

A sinusoidal wave is traveling on a string with speed 19.3 cm/s. The displacement of the particles of the string at x = 6.0 cm is found to vary with time according to the equation y = (2.6 cm) sin[1.8 - (5.8 s-1)t]. The linear density of the string is 5.0 g/cm. What are (a) the frequency and (b) the wavelength of the wave? If the wave equation is of the form

Answers

Answer:

Explanation:

equation of wave is given by the following equation

y = (2.6 cm) sin[1.8 - (5.8 s-1)t].

Comparing it with standard form of wave

y = A sin ( ωt - kx )

we get

ω = 5.8

2πn = 5.8

n = .92 per second

kx = 1.8

k x 6 = 1.8

k = 0.3

[tex]\frac{2\pi}{\lambda}[/tex] = 0.3

λ = 20.9 cm

3. What is the SI unit of force? What is this unit equivalent to in terms of fundamental units?
4. Why is force a vector quantity?

Answers

Answer:

force = mass * acceleration

therefore the SI unit is kg*m/s2 or newton's

it's a vector quantity because it has both direction(acceleration) and size (mass)

Fill in the blank with the correct word below (from the reading_):
helps you track your progress once you have made a lifestyle
change.
Self-monitoring
Healthy food
Regular xxercise
Goals

Answers

Answer:I think it’s self monitoring sorry if wrong

Explanation:

Answer:

It self monitoring

Explanation:

I took the test

A particle with charge Q and mass M has instantaneous speed uy when it is at a position where the electric potential is V. At a later time, the particle has moved a distance R away to a position where the electric potential is V2 ) Which of the following equations can be used to find the speed uz of the particle at the new position?
a. 1/2M(μ2^2-μ1^2)=Q (v1-v2)
b. 1/2M(μ2^2-μ1^2)^2=Q(v1-v2)
c. 1/2Mμ2^2=Qv1
d. 1/2Mμ2^2=1/4πx0 (Q^2/R)

Answers

Answer:

A

Explanation:

Ke = 1/2 MV^2

Consider a swimmer that swims a complete round-trip lap of a 50 m long pool in 100 seconds. The swimmer's... average speed is 0 m/s and average velocity is 0 m/s. average speed is 0.5 m/s and average velocity is 0.5 m/s. average speed is 1 m/s and average velocity is 0 m/s. average speed is 0 m/s and average velocity is 1 m/s.What is the swimmers average speed and average velocity?

Answers

Answer:

average speed is 1 m/s and average velocity is 0 m/s.

Explanation:

Given that :

Length of round trip = 50 m

Time taken = 100 seconds

The average speed :

Total distance / total time taken

Length of complete round trip :

(50 + 50) m, total. Distance = 100 m

100 / 100 = 1m/s

The average velocity :

Total Displacement / total time taken

Total Displacement of round trip = end point - start point = 0

0 / 100 = 0

Average speed is 1 m/s and average velocity is 0 m/s.

The average speed is defined as the ratio of distance to time. Speed is a scalar quantity hence it does not take direction into account while velocity is a vector quantity hence it takes direction into account.

The speed is obtained from;

Speed = Distance/time = 2(50 m)/100 s = 1 m/s.

The velocity is 0 m/s since it is complete round-trip lap.

Learn more about speed: https://brainly.com/question/7359669

Two spherical objects are separated by a distance that is 1.08 x 10-3 m. The objects are initially electrically neutral and are very small compared to the distance between them. Each object acquires the same negative charge due to the addition of electrons. As a result, each object experiences an electrostatic force that has a magnitude of 3.89 x 10-21 N. How many electrons did it take to produce the charge on one of the objects

Answers

Answer:

the charge on the object is 71.043×10^-20 C and the number of electron is 4.44

Explanation:

from coulumbs law, The force that is acting over both charge can be computed as

F=( kq1q2)/r^2..............eqn(1)

Where

F=electrostatic force= 3.89 x 10-21 N

k= column constant= 9 x 10^9 Nm^2/C^2

q1 and q2= magnitude of the charges

r= distance between the charges= 1.08 x 10-3 m.

Since both charges are experiencing the same force, eqn(1) can be written as

F=( kq^2)/r^2.

We can make q subject of the formula

q= √(Fr^2)/k

= √[(3.89 x 10^-21× (1.08 x 10^-3)^2]/8.99 x 10^9

q= 71.043×10^-20 C

Hence, the charge is 71.043×10^-20 C

From quantization law, the number of electron can be computed as

N=q/e

Where

N= number of electron

q= charges

=1.6×10^-19C

N=71.043×10^-20/1.6×10^-19

=4.44

Hence, the charge on the object is 71.043×10^-20 C and the number of electron is 4.44

calculate ine gravitational potential energy of the ball using pe=m×g×h.(use g=9.8 n/kg)


A 4.0-kilogram ball held 1.5 meters above the floor has ________ joules of potential energy​

Answers

Answer:

58.8J

Explanation:

Given parameters;

Mass of ball  = 4kg

Height above the floor  = 1.5m

g  = 9.8n/kg

Unknown:

Potential energy  = ?

Solution:

The potential energy of a body is the energy due to the position of the body.

It is mathematically expressed as:

  Potential energy = mass x acceleration due to gravity x height

  Potential energy  = 4 x 9.8 x 1.5  = 58.8J

An RC car is carrying a tiny slingshot with a spring constant of 85 N/m at 0.2 m off the ground at 5.6 m/s. The sling shot is pulled back 3.5 cm from a relaxed state and shoots a 25 g steel pellet in the same direction the car is moving. What is the velocity of the steel pellet relative to the ground as it leaves the sling shot

Answers

Answer:

The velocity of the steel pellet relative to the ground when it leaves the sling shot is approximately 5.960 meters per second.

Explanation:

Let suppose that RC car-slingshot-steelpellet is a conservative system, that is, that non-conservative forces (i.e. friction, air viscosity) can be neglected. The velocity of the steel pellet can be found by means of the Principle of Energy Conservation and under the consideration that change in gravitational potential energy is negligible and that the RC car travels at constant velocity:

[tex]\frac{1}{2}\cdot (m_{C}+m_{P})\cdot v_{o}^{2} + \frac{1}{2}\cdot k\cdot x^{2} = \frac{1}{2}\cdot m_{C}\cdot v_{o}^{2} + \frac{1}{2}\cdot m_{P}\cdot v^{2}[/tex]

[tex]\frac{1}{2}\cdot m_{P}\cdot v_{o}^{2} + \frac{1}{2}\cdot k\cdot x^{2} = \frac{1}{2}\cdot m_{P}\cdot v^{2}[/tex]

[tex]m_{P}\cdot v_{o}^{2} + k\cdot x^{2} = m_{P}\cdot v^{2}[/tex]

[tex]v^{2} = v_{o}^{2} + \frac{k}{m_{P}}\cdot x^{2}[/tex]

[tex]v = \sqrt{v_{o}^{2}+\frac{k}{m_{P}}\cdot x^{2} }[/tex] (1)

Where:

[tex]v_{o}[/tex] - Initial velocity of the steel pellet, measured in meters per second.

[tex]v[/tex] - Final velocity of the steel pellet, measured in meters per second.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]m_{P}[/tex] - Mass of the steel pellet, measured in kilograms.

[tex]m_{C}[/tex] - Mass of the RC car, measured in kilograms.

[tex]x[/tex] - Initial deformation of the spring, measured in meters.

If we know that [tex]v_{o} = 5.6\,\frac{m}{s}[/tex], [tex]k = 85\,\frac{N}{m}[/tex], [tex]m_{P} = 0.025\,kg[/tex] and [tex]x = 0.035\,m[/tex], then the velocity of the steel pellet relative to the ground when it leaves the sling shot is:

[tex]v = \sqrt{\left(5.6\,\frac{m}{s} \right)^{2}+\frac{\left(85\,\frac{N}{m} \right)\cdot (0.035\,m)^{2}}{0.025\,kg} }[/tex]

[tex]v \approx 5.960\,\frac{m}{s}[/tex]

The velocity of the steel pellet relative to the ground when it leaves the sling shot is approximately 5.960 meters per second.

A violin has a string of length
0.320 m, and transmits waves at
622 m/s. At what frequency does
it oscillate?

Answers

Answer:

1.9kHz

Explanation:

Given data

wavelength [tex]\lambda= 0.32m[/tex]

velocity [tex]v= 622 m/s[/tex]

We know that

[tex]v= f* \lambda\\\\f= v/ \lambda[/tex]

substitute

[tex]f= 622/ 0.32\\\\f= 1943.75\\\\f= 1.9kHz[/tex]

Hence the frequency is 1.9kHz

Answer:

971.2

Explanation:

It was right on acellus :)

25 points!


A 6 kg object accelerates from 5 m•s to 25 m•s in 30 seconds. What was the net force acting on the
object? Give your answer in Newtons to one significant figure and without a unit.

(Show Work)

Answers

Answer:

6N

Explanation:

Given parameters:

Mass of object  = 6kg

Initial velocity  = 5m/s

Final velocity  = 25m/s

Time  = 30s

Unknown:

Net force acting on the object  = ?

Solution:

From Newton's second law of motion:

   Force  = mass x acceleration

Acceleration is the rate of change of velocity with time

  Acceleration  = [tex]\frac{Final velocity - Initial velocity }{time}[/tex]  

  Force  = mass x  [tex]\frac{Final velocity - Initial velocity }{time}[/tex]  

So;

 Force  = 6 x [tex]\frac{25 - 5}{30}[/tex]    = 6N

When monochromatic light passes through the interface between two unknown materials at an angle θ where 0∘<θ<90∘, no changes in the direction of propagation of light are observed. What can be said about the two materials? Check all that apply. View Available Hint(s) Check all that apply. The two materials have matching indexes of refraction. The second material through which light propagates has a lower index of refraction. The second material through which light propagates has a higher index of refraction. The two materials are identical.

Answers

Answer:

the correct one is the first,   the refractive index of the two materials must be the same

Explanation:

When a beam of light passes through two materials, it must comply with the law of refraction

         n₁ sin θ₁ = n₂ sin θ₂

where n₁ and n₂ are the refractive indices of each medium.

In this case, it indicates that the light does not change direction, so the input and output angle of the interface must be the same,

       θ₁ = θ₂ = θ

substituting

          n₁ = n₂

therefore the refractive index of the two materials must be the same

When reviewing the answers, the correct one is the first

Which of the following is a mixture?
a air
biron
Chydrogen
d nickel

Answers

The answer is to this is b

Answer:

it will option option A hope it helps

One of the disadvantages of experimental research is that __________.
A.
it isn’t easily replicated
B.
it doesn’t often reflect reality
C.
the results aren’t generalizable
D.
conditions are not controllable


Please select the best answer from the choices provided

Answers

C I believe that would be it

Answer:

B

Explanation:

How much force is needed to accelerate a 65 kg rider AND her 215 kg motor scooter 8 m/s?? (treat
the masses as like terms)

Answers

Answer:

Force = 2240 Newton.

Explanation:

Given the following data;

Mass A= 65kg

Mass B = 215kg

Acceleration = 8m/s²

To find the force;

Force is given by the multiplication of mass and acceleration.

Mathematically, Force is;

[tex] F = ma[/tex]

Where;

F represents force.

m represents the mass of an object.

a represents acceleration.

First of all, we would have to find the total mass.

Total mass = Mass A + Mass B

Total mass = 65 + 215

Total mass = 280kg

Substituting into the equation, we have

[tex] Force = 280 * 8 [/tex]

Force = 2240 Newton.

Two objects travel the same distance. The one that is moving faster will:


Take more time to go the distance

Take less time to go the same distance

Take the same time as the slower object

None of the above

Answers

Answer: take less time to go the same distance

Explanation:

Because if it is going faster let’s say mph 60 mph is 60 miles per hour if you are going 40 miles per hour it will take you longer to get to your destination.

A car enters a 105-m radius flat curve on a rainy day when the coefficient of static friction between its tires and the road is 0.4. What is
the maximum speed which the car can travel around the curve without sliding

Answers

Static friction (magnitude Fs) keeps the car on the road, and is the only force acting on it parallel to the road. By Newton's second law,

Fs = m a = W a / g

(a = centripetal acceleration, m = mass, g = acceleration due to gravity)

We have

a = v ² / R

(v = tangential speed, R = radius of the curve)

so that

Fs = W v ² / (g R)

Solving for v gives

v = √(Fs g R / W)

Perpendicular to the road, the car is in equilibrium, so Newton's second law gives

N - W = 0

(N = normal force, W = weight)

so that

N = W

We're given a coefficient of static friction µ = 0.4, so

Fs = µ N = 0.4 W

Substitute this into the equation for v. The factors of W cancel, so we get

v = √((0.4 W) g R / W) = √(0.4 g R) = √(0.4 (9.80 m/s²) (105 m)) ≈ 20.3 m/s

A small sphere of reference-grade iron with a specific heat of 447 J/kg K and a mass of 0.515 kg is suddenly immersed in a water-ice mixture. Fine thermocouple wires suspend the sphere, and the temperature is observed to change from 15 to 14C in 6.35 s. The experiment is repeated with a metallic sphere of the same diameter, but of unknown composition with a mass of 1.263 kg. If the same observed temperature change occurs in 4.59 s, what is the specific heat of the unknown material

Answers

Answer:

The specific heat of the unknown material is 131.750 joules per kilogram-degree Celsius.

Explanation:

Let suppose that sphere is cooled down at steady state, then we can estimate the rate of heat transfer ([tex]\dot Q[/tex]), measured in watts, that is, joules per second, by the following formula:

[tex]\dot Q = m\cdot c\cdot \frac{T_{f}-T_{o}}{\Delta t}[/tex] (1)

Where:

[tex]m[/tex] - Mass of the sphere, measured in kilograms.

[tex]c[/tex] - Specific heat of the material, measured in joules per kilogram-degree Celsius.

[tex]T_{o}[/tex], [tex]T_{f}[/tex] - Initial and final temperatures of the sphere, measured in degrees Celsius.

[tex]\Delta t[/tex] - Time, measured in seconds.

In addition, we assume that both spheres experiment the same heat transfer rate, then we have the following identity:

[tex]\frac{m_{I}\cdot c_{I}}{\Delta t_{I}} = \frac{m_{X}\cdot c_{X}}{\Delta t_{X}}[/tex] (2)

Where:

[tex]m_{I}[/tex], [tex]m_{X}[/tex] - Masses of the iron and unknown spheres, measured in kilograms.

[tex]\Delta t_{I}[/tex], [tex]\Delta t_{X}[/tex] - Times of the iron and unknown spheres, measured in seconds.

[tex]c_{I}[/tex], [tex]c_{X}[/tex] - Specific heats of the iron and unknown materials, measured in joules per kilogram-degree Celsius.

[tex]c_{X} = \left(\frac{\Delta t_{X}}{\Delta t_{I}}\right)\cdot \left(\frac{m_{I}}{m_{X}} \right) \cdot c_{I}[/tex]

If we know that [tex]\Delta t_{I} = 6.35\,s[/tex], [tex]\Delta t_{X} = 4.59\,s[/tex], [tex]m_{I} = 0.515\,kg[/tex], [tex]m_{X} = 1.263\,kg[/tex] and [tex]c_{I} = 447\,\frac{J}{kg\cdot ^{\circ}C}[/tex], then the specific heat of the unknown material is:

[tex]c_{X} = \left(\frac{4.59\,s}{6.35\,s} \right)\cdot \left(\frac{0.515\,kg}{1.263\,kg} \right)\cdot \left(447\,\frac{J}{kg\cdot ^{\circ}C} \right)[/tex]

[tex]c_{X} = 131.750\,\frac{J}{kg\cdot ^{\circ}C}[/tex]

Then, the specific heat of the unknown material is 131.750 joules per kilogram-degree Celsius.

If a cyclist travels 30 km in 2 h, What is her average speed?​

Answers

The avarage speed is 15km/h

Answer:

15km/h

Explanation:

→ Speed = Distance ÷ Time

30 ÷ 2 = 15km/h

Two pieces of amber are hung from threads. Piece A is charged by rubbing piece A with fur. Piece B is charged by rubbing piece B with silk. Nylon is used to rub and charge a third piece of amber. Piece A and B are both repelled by the third piece of amber. This means:____.

Answers

Answer:

ieces A and B must also have the same type of charges

Explanation:

In electrostatics, charges of the same sign repel and charges of different signs attract.

If we apply this to our case, we have that part A and C repel each other, therefore they have the same type of charge.

Also part A and C repel each other, therefore they have the same type of charge.

If we use the transitive property of mathematics, pieces A and B must also have the same type of charges

It has been argued that power plants should make use of off-peak hours (such as late at night) to generate mechanical energy and store it until it is needed during peak load times, such as the middle of the day. One suggestion has been to store the energy in large flywheels spinning on nearly frictionless ball-bearings. Consider a flywheel made of iron, with a density of 7800 kg/m^3 , in the shape of a uniform disk with a thickness of 11.3 cm.

Required:
a. What would the diameter of such a disk need to be if it is to store an amount of kinetic energy of 14.1 MJ when spinning at an angular velocity of 93.0 rpm about an axis perpendicular to the disk at its center?
b. What would be the centripetal acceleration of a point on its rim when spinning at this rate?

Answers

Answer:

Explanation:

kinetic energy = 14.1 MJ = 14.1 x 10⁶ J

Let radius of flywheel be r .

volume of flywheel = π r² x t where t is thickness

= 3.14 x r² x .113 m³

= .04 r² m³

mass = volume x density

= .04 r² x 7800 = 312.73 r²kg

moment of inertia I = 1 / 2 mass x radius²

= .5 x 312.73 r² x r²

= 156.37 r⁴ kg m²

angular velocity ω = 2π x 93/60

= 9.734 rad /s

kinetic energy = 1/2 Iω² where ω is angular velocity

= .5 x 156.37 r⁴ x 9.734²

= 7408.08 r⁴

Given

7408.08 r⁴ =  14.1 x 10⁶

r⁴ = .19 x 10⁴

r = .66 x 10

= 6.60 m .

Diameter = 13.2 m

b )

centripetal acceleration of a point on its rim = ω² r

= 9.734² x 6.6

= 625.35 m /s²

a graduated cylinder.measures 15.3 mL. Convert this measurement to DaL
Answers:

A. 0.0153
B. 0.00153
C. 0.000153
D. 0.153

Answers

Answer:

0.000153DaL  

Explanation:

We have been given:

         15.3mL to convert to DaL

DaL is a unit of volume which indicates a decaliter.

 This implies that;

             1 Da L  = 1 x 10²L

So:

               1 mL  = 1 x 10⁻³L

       So 15.3mL will give 15.3 x 10⁻³L

So;

           1 x 10²L   =  1 DaL  

      15.3 x 10⁻³L  will give [tex]\frac{15.3 x 10^{-3} }{1 x 10^{2} }[/tex]   = 15.3 x 10⁻⁵DaL

Therefore, this is 0.000153DaL  

           

Like charges will exert a force of
a. positive
b. negative
c. attraction
d. repulsion
e. neutral​

Answers

Answer:

D- Repulsion

Explanation:

A positively charged object will exert a repulsive force upon a second positively charged object.

Repulsión can someone help me ? What is the summary of chapter 27 book two roads by Joseph

An electric range has a constant current of 10 A entering the positive voltage terminal with a voltage of 110 V. The range is operated for two hours, (a) Find the charge in coulombs that passes through the range, (b) Find the power absorbed by the range, (c) If electric energy costs 12 cents per kilowatt-hour, determine the cost of operating the range for two hours.

Answers

Answer:

A. 72000 C

B. 1100 W

C. 26.4 cents.

Explanation:

From the question given above, the following data were obtained:

Current (I) = 10 A

Voltage (V) = 110 V

Time (t) = 2 h

A. Determination of the charge.

We'll begin by converting 2 h to seconds. This can be obtained as follow:

1 h = 3600 s

Therefore,

2 h = 2 h × 3600 s / 1 h

2 h = 7200 s

Thus, 2 h is equivalent to 7200 s.

Finally, we shall determine the charge. This can be obtained as follow:

Current (I) = 10 A

Time (t) = 7200 s

Charge (Q) =?

Q = It

Q = 10 × 7200

Q = 72000 C

B. Determination of the power.

Current (I) = 10 A

Voltage (V) = 110 V

Power (P) =?

P = IV

P = 10 × 110

P = 1100 W

C. Determination of the cost of operation.

We'll begin by converting 1100 W to KW. This can be obtained as follow:

1000 W = 1 KW

Therefore,

1100 W = 1100 W × 1 KW / 1000 W

1100 W = 1.1 KW

Thus, 1100 W is equivalent to 1.1 KW

Next, we shall determine the energy consumption of the range. This can be obtained as follow:

Power (P) = 1.1 KW

Time (t) = 2 h

Energy (E) =?

E = Pt

E = 1.1 × 2

E = 2.2 KWh

Finally, we shall determine the cost of operation. This can be obtained as follow:

1 KWh cost 12 cents.

Therefore, 2.2 KWh will cost = 2.2 × 12

= 26.4 cents.

Thus, the cost of operating the range for 2 h is 26.4 cents.

The tub of a washer goes into its spin-dry cycle, starting from rest and reaching an angular speed of 4.0 rev/s in 9.0 s. At this point, the person doing the laundry opens the lid, and a safety switch turns off the washer. The tub slows to rest in 15.0 s. Through how many revolutions does the tub turn during this 24 s interval

Answers

Answer:

48 rev

Explanation:

a) we can calculate the distance covered by the tube using the formula:

θ = (ω + ωo)t/2

where ω is the final angular speed, θ is the distance covered, t is the time taken, ωo is the initial angular speed.

Firstly, we calculate the distance covered from 0 to 9 s then from 9s to 24 s.

within 9s, the tub runs from rest (0) to 4 rev/s, hence:

t = 9s, wo = 0, w = 4 rev/s = (4 * 2π) rad/s = 8π rad/s. Hence:

θ = (ω + ωo)t/2 = (0 + 8π)9 / 2 = 36π rad

θ = 36π rad = (36π)/2π rev = 18 rev

Also, within 15 s, the tub runs from 4 rev/s to rest, hence:

t = 15 s, wo = 4 rev/s = 8π rad/s, w = 0 rad/s. Hence:

θ = (ω + ωo)t/2 = (8π + 0)15 / 2 = 60π rad

θ = 60π rad = (60π)/2π rev = 30 rev

Therefore the total revolutions by the tube during 24 s interval = 30 rev + 18 rev = 48 rev

On a low-friction track, a 0.66-kg cart initially going at 1.85 m/s to the right collides with a cart of unknown inertia initially going at 2.17 m/s to the left. After the collision, the 0.66-kg cart is going at 1.32 m/s to the left, and the cart of unknown inertia is going at 3.22 m/s to the right. The collision takes 0.010 s.
What is the unknown inertia?
What is the average acceleration of the heavier cart?
What is the average acceleration of the lighter cart?

Answers

Answer:

(a) the unknown inertia is 0.388 kg

(b) the average acceleration of the heavier cart is 317 m/s²

(c) the average acceleration of the lighter cart is 539 m/s²

Explanation:

Given;

mass of the first cart, m₁ = 0.66 kg

initial speed of the first cart, u₁ = 1.85 m/s

let the mass of the cart with unknown inertia be m₂

initial velocity of the second cart, u₂ = 2.17 m/s to the left

velocity of the first cart after collision, v₁ = 1.32 m/s to the left

velocity of the second cart after collision, v₂ = 3.22 m/s

time of collision, t = 0.010 s

(a) What is the unknown inertia?

Apply the principle of conservation of linear momentum, to determine the unknown inertia.

let leftward direction be negative direction

let rightward direction be positive direction

m₁u₁ + m₂u₂ = m₁v₁  + m₂v₂

0.66(1.85) + m₂(-2.17) = 0.66(-1.32) + m₂(3.22)

1.221 - 2.17m₂ = -0.8712 + 3.22m₂

1.221 + 0.8712 = 3.22m₂ + 2.17m₂

2.0922 = 5.39m₂

m₂ = 2.0922 / 5.39

m₂ = 0.388 kg

The unknown inertia is 0.388 kg

(b) the average acceleration of the heavier cart

the heavier cart has a mass of 0.66 kg

[tex]a = \frac{v_1 - u_1}{t} \\\\a = \frac{-1.32 - 1.85}{0.01} \\\\a = -317 \ m/s^2\\\\|a| = 317 \ m/s^2[/tex]

(c) the average acceleration of the lighter cart;

the lighter cart has a mass of 0.388 kg

[tex]a = \frac{v_2 - u_2}{t} \\\\a = \frac{3.22 - (-2.17)}{0.01} \\\\a =\frac{3.22 \ +\ 2.17}{0.01} \\\\a= 539\ m/s^2[/tex]

HELP PLEASE!!!
Running at 3.0 m/s, Burce, the 50.0 kg quarterback, collides with Max, the 100.0 kg tackle, who is traveling at 6.0 m/s in the other direction. Upon collision, Max continues to travel forward at 2.0 m/s.If the collision between the players lasted for 0.04 s, determine the impact force on either during the collision

Answers

Answer:

10kN

Explanation:

Given data

m1= 50kg

u1= 3m/s

m2= 100kg

u2= 6m/s

v1= 2m/s

time= 0.04s

let us find the final velocity of Bruce v1

from the conservation of linear momentum

m1u1+m2u2=m1v1+m2v2

substitute

50*3+100*6= 50*v1+100*2

150+600=50v1+200

750-200=50v1

550= 50v1

divide both sides by 50

v1= 550/50

v1=11 m/s

From

F= mΔv/t

for Bruce

F=50*(11-3)/0.04

F=50*8/0.04

F=400/0.04

F=10000

F=10kN

for Max

F=100*(6-2)/0.04

F=100*4/0.04

F=400/0.04

F=10000

F=10kN

Other Questions
Radio waves are used to transmit information on various channels. What is the wavelength of a radio wave having the frequency of 5.40 1010 Hz?1. Analyze the Problem = and c = Unknown: =You know that because radio waves are part of the electromagnetic spectrum, their speed, frequency, and wavelength are related by the formula c = . Mohawk Machining, which uses a process-costing system, adds material at the beginning of production and incurs conversion cost evenly throughout manufacturing. The following selected information was taken from the company's accounting records: Total equivalent units of materials: 8,000 Total equivalent units of conversion: 7,400 Units started and completed during the period: 6,500 On the basis of this information, the ending work-in-process inventory's stage of completion is:_____.A- 80%.B- 70%.C- 60%. - 40%.D- some other percentage not listed above. Should the president be able to declare war Do all metals stick to magnets? Give an example. I NEED HELP FASTT Indiana University students contribute in many ways to what has long been recognized as a rich community of diverse ideas, cultures, and experiences. Identify your most significant contribution to one or more of the communities to which you belong. (Communities, for example, can form around shared experiences in music, sports, the arts, culture, ethnicity, shared beliefs, or ideas.) Describe your level of achievement or involvement and reflect on your most important contributions. Briefly describe how these experiences have influenced you. (200-400 words) Help how do I solve this and what is the answer. Explain plz 2If f(x) = -2x2- x, what is f(2) and f(3)? *starts crying from happiness* WILL BRAINLIEST!!!Read the short story and answer the question based on the story. Respond with a complete Spanish sentence.Mi casa es muy grande y bonita. Hay dos cuartos muy especiales: la sala y la sala familiar. Tambin hay un garaje, un patio y un jardn. En la sala hay dos sofs grandes, tres mesas y dos lmparas. En la sala familiar hay un televisor y dos butacas pequeas. Me gusta ver la televisin en la sala familiar. En el garaje hay una bicicleta roja y una bicicleta negra. En el patio hay una mesa y cuatro sillas y en el jardn hay muchas flores. Me gusta mucho estar en mi casa.Cuntas sillas hay en el patio? Which statement best defines the relationship between work and energy?Work can transfer energy between objects and increase radiant energy.Work can transfer energy between objects and cause a change in the form of energy.Work can transfer energy between objects and decrease nuclear energyWork can transfer energy between objects and cause a change in the amount of total energy. Will mark brainliest!!!Solve for x Which system contains the liver, pancreas, and stomach? a digestive b circulatory c respiratory d endocrine Read the sentence.I brought my raincoat _____ it is supposed to rain today.Which transition best completes the sentence?even thoughbecauseadditionallyhowever Describe how to demonstrate one of the 3 types of heat transfer (conduction, convection, or radiation) using a different idea/technique Scientists have made predictions about the universe today based on the big bang theory. Observations that match these predictions support the big bang theory. Which of the following observations have scientists made that provides evidence of the big bang?A. Light from the moment of the big bang has been observed.B. The percentages of hydrogen and helium match the predicted percentages.C. Galaxies are moving toward each other as predicted by the big bang theory. D. Many galaxies that are similar to the Milky Way have been observed. The study of the role consumers play in a economic system is called what what is the central idea of this excerpt?from how the grimm brothers saved the Fairy Tale. Read the sentence below.That speech _____ me in a way I did not expect.Which word should go in the blank? (5 points)Group of answer choicesaffecteffecteffectedaffected Plz help!! Which statement best explains the informationpresented on this map?O Howe was too preoccupied with takingPhiladelphia to provide the support needed inSaratogaO General Burgoyne's military expertise helped bringabout a major turning point in the war.O The Patriots were outnumbered and too weakstrategically to make major moves in 1777.O Attempting to isolate the New England colonieswas a wise decision that kept the Patriots at bay. Suppose two children push horizontally, but in exactly opposite directions, on a third child in a wagon. The first child exerts a force of 75.0N, the second child exerts a force of 90.0 N, friction is 12.0 N, and the most of the third child plus wagon is 23.0 kga)what is the system of interest if the acceleration of the child in the wagon is to be calculated