Answer:
I've grown potatoes on top of loose earth that's covered by a thick layer of loose straw. It allows the green leafy parts to easily push through to the sunlight above while keeping developing tubers protected from light. I've grown them this way because I really enjoy the taste of fresh new potatoes and have no desire to store mature potatoes for winter. I want to get the most baby potatoes possible while not damaging the plants with tiny potatoes not big enough to eat yet. It also keeps the potatoes cleaner than if grown under the soil.
When I start lifting the straw back to pick the largest new potatoes, I can see the development of the other potatoes. While the biggest potatoes are 1 1/2 to 2 inches in size, others range in size all the way down to 1/4 inch or less.
When a specific garden plant blooms, most of the flowers open within a very short time period. Now think of tomato plants. The flowers continue to open over a period of months and both ripe tomatoes, large and small green tomatoes as well as flowers can all be found on the same plant. Not all the fruit will be ripe before cold weather kills the plant.
Potatoes are closely related to tomatoes and like tomatoes, not all the tubers will be full size when the plant dies back. So I'd say it's neither genetics nor environmental factors but the inherent life and growth cycle of potatoes that account for the tuber size difference.
The difference in the tuber size in plants of potatoes and tomatoes does not depend upon its genetics or environmental factors rather it depends upon the inherent life and growth cycle of the plant.
What is the growth cycle in potatoes?Growth cycles are the recurrent fluctuations in the series of deviations from the usual trend of the plant growth. Thus, the growth cycle contractions in the plant include slowdowns as well as absolute declines in the activity, whereas business cycles contractions include only the absolute declines or recessions.
Potatoes are the plant species which are closely related to tomatoes and just like tomatoes, not all the tubers will be full size when the plant dies back in time. So, it is neither the genetics nor the environmental factors but the inherent life and growth cycle of the potato plants that account for the tuber size difference in the plants which are genetically identical to each other.
Learn more about Potato here:
https://brainly.com/question/27648708
#SPJ2
Which part of the brain is indicated by the arrow below?
Pons
Cerebellum
Cerebrum
Medulla oblongata
Answer:
the correct answer is option ( A ) pons
Explanation:
hope it helps you
Mark my answer as brainlist
have a nice day
Answer:
A. Pons
Explanation:
I got it right on my quiz :)
Some of the cell membrane functions are similar to the ________ of the body.
the skin has cells like that
where's ATP produced in a cell and how?
The energy released during respiration is stored in the form of compounds called ATP molecules. They are produced by the enzyme ATP synthesis which converts ADP to ATP. It is located in the membrane of the cellular structures called mitochondria.
Answer:
Most of the ATP in cells is produced by the enzyme ATP synthase, which converts ADP and phosphate to ATP. ATP synthase is located in the membrane of cellular structures called mitochondria; in plant cells, the enzyme also is found in chloroplasts.
Explanation:
BRAINLIEST PLZ
what is photosynthesis?
Answer:
Photosynthesis is the process by which plants prepare food using water, sunlight, chlorophyll and carbon dioxide
Answer:
It is the process in which green plants use sunlight to make there own food .
Explanation:
I HOPE YOUR DAY GOES GREAT.
Which of the following factors does not affect soil formation?
a. precipitation
b. time
C. erosion
d. none of the above
Please select the best answer from the choices provided
B
Ο Ο Ο Ο
PLS HELP ASAP
Answer:
b is the answer
Explanation:
edge2021
During DNA replication, when the mRNA molecule is made by complementary base pairing, the percentage of adenine bases would be equal to which of the following bases in a RNA molecule?
Adenine
Cytosine
Guanine
Uracil
Answer:
I think the answer is uracil because it has the same percentage as thymine in RNA which is 30% and thymine has the same percentage as adenine.
I hope this helps
What is one condition that must be met for a population to be in genetic equilibrium?
Answer:
Hardy-Weinberg equilibrium
Explanation:
In order for the population's gene pool frequencies to remain constant, the Hardy-Weinberg equilibrium must be met. Random mating, no mutation, migration, or natural selection must all be present, as well as a big sample size.
OAmalOHopeO
A farmer decides to try to increase his profits by mating his two goats that produce the most milk together. The farmer’s descendants continue the process and over 400 years the family produces goats that make more milk than any in the country. Eventually the goats change enough that they are designated a new species. This is an example of:
A. Artificial selection
B. Acquired characteristics
C. Disruptive selection
D. Natural selection
Answer:
A.is the correct answer
Explanation:
People have been doing asimple form genetic enineeringfor thousands of years. This is called selective breeding. Selective breeding, or artifical selection, is a process where people try and improve plants and animals by selecting and breeding those that have desireable charactistics.
For example, a farmer might choose from his two largest cattle in his herd and breed them together so that the offspring will be even bigger and produce more meat.
Suppose you are a genetics counselor who is working with a 21-year-old pregnant woman who has just discovered that her father has Huntington's disease, a rare dominant autosomal trait. This disease usually develops in middle age, so people carrying this trait do not find out they have this genetic disorder until midlife. What are the chances that the child she is carrying will develop the disease
Answer:
s
Explanation:
I was wondering what kind of organism this is
and could u also help me name the labelled parts
Answer:
i think it's hydra but i'm not sure.
What is the difference between a food chain and food web
Answer:
A food chain is a sequence of organisms through which nutrients and energy pass as one organism eats another. A food chain must start with energy from the sun, have a producer (an organism that makes food by itself with energy from sun), and have at least one consumer eat and gain nutrients from another consumer or a producer. At the end of the food chain, there must be a decomposer to break down the dead animals into nutrients, which is beneficial for soil. Additionally, there must be arrows to indicate the flow of energy travelling from one organism to another. An example of a food chain would be:
sun -> roses -> caterpillar -> crows -> garter snakes -> mushrooms
Energy source: Sun
Producer: Roses
Consumer: Caterpillar
Secondary consumer: Crows
Tertiary consumer: Garter snakes
Decomposer: Mushrooms
A food web is basically an interconnection of multiple food-chains in a graphical representation to see which animal eats what and their niche (role they play in an ecological community). Here's an example of a food web (not mine, credits to creator):
Why do cells use fat and starch for long-term energy storage instead of ATP molecules?
O ATP is used for long-term storage, while fat and starch are used for immediate energy.
O ATP is used for short-term energy and to build molecules of starch and fat.
O Fat and starch are unstable and can be stored short-term, while ATP molecules are stable and stored long-term.
O Fat and starch are stable if used as energy immediately, while ATP is used as long-term storage.
Answer:
Cells use fat and starch for long-term energy storage instead of ATP molecules because fat and starch are more efficient energy storage molecules than ATP.ATP is a molecule used for immediate energy, not for long-term energy storage.
Fat and starch are complex carbohydrates that can be broken down to release energy. Fat molecules are primarily composed of carbon and hydrogen, while starch is made of glucose molecules.Both fat and starch can be broken down through cellular respiration to produce ATP molecules that can be used to power various cellular processes.
However, because fat and starch molecules contain more chemical energy than ATP, they can provide a much larger amount of energy over a longer period of time.
Furthermore, ATP molecules are relatively unstable and cannot be stored for long periods of time, while fat and starch can be stored in specialized cellular structures for long-term energy needs.
HELPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!! All of the following cause mechanical weathering EXCEPT ____. a. ice c. burrowing animals b. tree roots d. carbonic acid
Explanation:
c. burrowing animals is the answer
Which of the following statements are true about antibodies?
A. Both Polyclonal and Monoclonal antibodies are naturally produced in immune
responses.
B. Polyclonal antibodies are part of the natural immune response; monoclonal antibodies
are clones of plasma cells used for medical research.
C. Polyclonal antibodies are used for the treatment of cancer, monoclonal antibodies are
used for medical research.
D. Monoclonal antibodies work against many types of antigens; polyclonal antibodies
work against a specific antigen.
Answer:
both a and b are the correct answers
Which of the following is not one of the steps of the water cycle?
A. Condensation of water vapor into clouds.
B. Throughflow of underground water back to the ocean.
C. Respiration of water into the atmosphere.
D. Transpiration of water into the atmosphere.
The option that is not one of the steps of the water cycle includes options C(Respiration of water into the atmosphere)
and D(Transpiration of water into the atmosphere).
Water cycle can be defined as the constant flow or movement of water through earth, atmosphere and the oceans either in liquid states or vapour.
The four main steps of water cycle includes:
EvaporationCondensationprecipitation and Collection (this leads to formation of underground water which gradually flows back into the oceans).In nature, water circulates mainly within the abiotic (non-living) environment; only a small proportion recycled through living organisms.
Therefore respiration and transpiration which occurs through living organisms doesn't form the major steps of water cycle, hence the correct option is C (Respiration of water into the atmosphere) and D (Transpiration of water into the atmosphere).
Learn more about water cycle here:
https://brainly.com/question/458815
bones are moved by _____ muscles. these muscles are attached to bones by ________ and they work in ______ pairs. hen one muscles in pair _______ the other _______ and bones are _______ in a particular direction. muscles cell contain many ______ which release energy for movements.
fill in the blanks plz.
these are the word that want to come to those blanks
involuntary , relaxes , mitochondria , contracts , antagonistic , pushed , ligaments , pulled , ribosomes , muscles , tendons , voluntary.
Answer:
voluntary
tendons
antagonistic
contacts
relaxes
pushed
mitochondria
hope it helps
the words are in order starting from the top to the last one
Why do some researchers prefer to use embryonic stem cell in medical research?
A. There is no controversy surrounding the use of embryonic stem calls
B. The use of embryonic stem cell is much less expensive than the use of adult stem cells
C. No living tissue is damaged when scientists use embryonic stem cells
D. Embryonic stem cells are able to differentiate into a wider range of call than adult stem cells
Answer:
Cell therapies would use stem cells, or cells grown from stem cells, to replace or rejuvenate damaged tissue. Scientists also want to use stem cells to understand disease and find drugs that might treat it. Embryonic stem cells could be used to make more specialized tissues that have been lost to disease and injury
The researchers prefer to use embryonic stem cell in medical research as Embryonic stem cells are able to differentiate into a wider range of call than adult stem cells.
What are the functions of embryonic stem cells?A blastocyst, an early-stage pre-implantation embryo, is the source of embryonic stem cells, which are pluripotent stem cells. Four to five days after fertilization, human embryos reach the blastocyst stage.
The human blastocyst, an early stage of the developing embryo that lasts from the fourth to seventh day after fertilization, contains embryonic stem cells (ESCs) in its inner cell mass. In typical undeveloped turn of events, they vanish after the seventh day.
The ability to differentiate into cell types belonging to the three germ layers (ectoderm, endoderm, and mesoderm) is what is meant by the term "pluripotent." the three distinct types of tissue that are present during embryonic development and later combine to form the adult.
Learn more about Embryonic stem cells:
https://brainly.com/question/11161299
#SPJ7
The purpose of Mendel's experiments with dihybrid crosses was to determine
whether:
A. an F2 generation could be produced from the Fi offspring.
B. one of two traits could be transformed by DNA.
O c. one trait would affect how another is inherited.
D. traits are controlled by more than one gene.
Answer:
C. one trait would affect how another is inherited
Explanation:
NOT A QUIZ: 10 POINTS!
Answer:
a. (black fur): phenotype
b. (AA, Aa, aa): genotypes
c. (Aa): heterozygous
d. (aa): hom0zygous recessive
e. (AA): hom0zygous dominant
Explanation:
different between dominant character and recessive character
Dominant character:are always expressed when the connected allele is dominant,even if only one copy of the dominant trait exits.
Recessive character:are expressed only if both the connected allele are recessive.
Answer:
Dominant and recessive traits exist when a trait has two different forms at the gene level. The trait that first appears or is visibly expressed in the organism is called the dominant trait. The trait that is present at the gene level but is masked and does not show itself in the organism is called the recessive trait.
Explanation:
If some traits are absent or not expressed, but found in the parent, then the allele is said to be recessive.
Difference Between Recessive and Dominant Traits
DOMINANT
Dominant Trait Recessive Trait
Dominant allele is denoted by a capital letter
RECESSIVE
Recessive allele is denoted by a small letter
HOPE it helps you
have a good day
Tania looks at several different multivitamins in the store and notes that there are many different formulations with
varying amounts of several types of vitamins. She would like to choose a brand that only has the essential vitamins
that humans need to consume.
What are the vitamins that Tania should verify are in the product that she purchases?
O vitamins A, B, C, D, E, and K
O vitamins A, B, C, E, and K
O vitamins A, B, C, D, and E
O vitamins A, B, C, D, E, F, and K
Why are amphibians considered as unsuccessful land vertebrates
All cells are contained within a membrane called the:
A. Cell wall
B. Cytoplasm bilayer
C. Cytosol
D. Phospholipid bilayer
Answer:
Phospholipid bilayer
Explanation:
That is essentially the primary componenent of the cell membrane where phospholipids form two layers.
which type of motion dose not change the amino produced
Answer:
silent mutation. have a great day! :)
a) What is the earth's path around the sun called? b) How long does it take for Earth to complete a complete circuit around the Sun? c) Name one planet that is closer to the Sun than Earth and another one that is further away. .
what is not a function of plasma membrane
Answer:
the control center of the cell.
A standing water source is used for water storage, flood control, or
electricity, it is called a
____?
Answer:
A Dam
Explanation:
Dams can be used for storing water, flood control, and generating electricity.
The exchange of genetic materials between homologous chromosomes is called
a. synapsis
b. chiasmata
c. crossing over
d. cytokinesis
Answer:
c is correct answer ......
Which of the following describe proteins? Check
all that apply.
O a large class of molecules made up of sugars
a type of molecule that can initiate or assist
other processes in the body
O a large class of molecules made up of amino
acids
O a molecule that stores the information for the
creation and functioning of cells
Answer:
a large class of molecules made of amino acids...since amino acids are the smallest particles that make up proteins.
I hope this helps
Answer: For the multiple choice the answers are B and C
Explanation: Just had this question in class
Indica el período, el grupo y el número atómico de los elementos que se representan con las siguientes configuraciones electrónicas: 1. 1s2 Grupo: ______ Periodo: _______ 2. 1s22s22p63s1 Grupo: ______ Periodo: _______ 3. 1s22s22p63s23p64s2 Grupo: ______ Periodo: _______ 4. 1s22s22p63s23p64s23d1 Grupo: ______ Periodo: _______ 5. 1s22s22p63s23p64s23d104p3 Grupo: ______ Periodo: _______
Answer:
1. 1s² Grupo: 18 Periodo: 1
2. 1s²2s²2p⁶3s¹ Grupo: 1 Periodo: 3
3. 1s²2s²2p⁶3s²3p⁶4s² Grupo: 2 Periodo: 4
4. 1s²2s²2p⁶3s²3p⁶4s²3d¹ (electrones de valencia) Grupo: 3 Periodo: 4
5. 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p³ (electrones de valencia) Grupo: 15 Periodo: 4
Explanation:
La configuración electrónica de los elementos es la disposición de todos los electrones de un elemento en niveles y subniveles de energía (orbitales).
Hay 7 niveles de energía, numerados del 1 al 7, y en los que los electrones se distribuyen, lógicamente, en orden según su nivel de energía. Los electrones con menos energía girarán en el nivel 1. Cada nivel se divide en subniveles. Estos subniveles en los que se divide cada nivel pueden ser hasta 4. Estos 4 subniveles se denominan: s, p, d, f. En el subnivel s solo puede haber un máximo de 2 electrones, en p puede haber un máximo de 6 electrones, en el subnivel d 10 electrones y finalmente en el subnivel f puede haber un máximo de 14 electrones.
Por otro lado, los electrones de valencia son los electrones que se encuentran en la última capa electrónica (denominada orbitales de valencia) y tienen muchas posibilidades de participar en una reacción química.
En la tabla periódica, en cada período aparecen los elementos cuyo último nivel de su configuración electrónica coincide con el número del período, mientras que en cada grupo aparecen los elementos que presentan el mismo número de electrones en el último nivel ocupado o capa de valencia. Entonces:
1. 1s² Grupo: 18 Periodo: 1
2. 1s²2s²2p⁶3s¹ Grupo: 1 Periodo: 3
3. 1s²2s²2p⁶3s²3p⁶4s² Grupo: 2 Periodo: 4
4. 1s²2s²2p⁶3s²3p⁶4s²3d¹ (electrones de valencia) Grupo: 3 Periodo: 4
5. 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p³ (electrones de valencia) Grupo: 15 Periodo: 4