Answer:
Explanation:
A Solid is one of the three main states of matter. By definition a solid is something whose molecules are so densely packed together that it allows it to keep its shape. Therefore if the item has a definite shape that does not change on it's own it is a solid. As opposed to a liquid which will take and fill the shape of it's container.
mix 4 L of 30°C water is 6 L of 40°C water and you’ll have water at what temperature?
Answer:
dont know
Explanation:
need points
A thug pushes some 100 kg punk with 300 N of force. How much is the punk accelerated?
Answer:
Acceleration generate by punk = 3 m/s²
Explanation:
Given:
Weight of punk = 100 Kg
Force applied on punk = 300 N
Find:
Acceleration generate by punk = ?
Computation:
Acceleration = Force / Mass
Acceleration generate by punk = Force applied on punk / Weight of punk
Acceleration generate by punk = 300 N / 100 Kg
Acceleration generate by punk = 3 m/s²
canadas largest trading partner is
Answer:
united states
Explanation:
give brainiest please
When the Sun’s radiant energy falls on Earth’s oceans, it causes water to change state by evaporating. Which form of energy does water vapor have?
Answer:
water vapor is a type of gas
Explanation:
all gas are in air state of form
hope this helps
Answer:
chemical potential energy
Explanation:
When the sun's radiant energy falls on Earth's oceans, it causes water to change state by evaporating. The form of energy water vapor have is chemical potential energy. when heat energy of sun falls on water surface, its state change from liquid to gas. This gas rises above in the form of water vapor. Its a chemical change. If this vapor get condense/ cool, it will turn into liquid again. We can say that vapor has potential to transform into water again. Thus, the energy stored in water vapor is called chemical potential energy.
Choose all the answers that apply.
Power is calculated using ___.
time
work
friction
horsepower
efficiency
Answer:
Work
Explanation:
What is the Thermal energy firm Friction?
Answer:
Explanation:
All the work done by the friction force results in a transfer of energy into thermal energy of the box-floor system. This thermal energy flows as heat within the box and floor, ultimately raising the temperature of both of these objects.
A microwave oven uses a current of 0.45 Amps in a voltage of 120 Volts how much power does a microwave use?
Answer:
54 W
Explanation:
Power = Voltage* Current =V*I = 120V*0.45A =54 Watt
If the electrons in an atom were stationary, they would be ___ the nucleus
Answer:
Matter in the universe is made up of atoms, particles if electrons were to be stationary, they would have fallen into the nucleus because of electrostatic force acting on them destroying very existence of an atom we know.
30
. Which of the following represents the
statement "The difference of two square
numbers is positive
Answer:
In mathematics, the difference of two squares is a squared (multiplied by itself) number subtracted from another squared number. Every difference of squares may be factored according to the identity. in elementary algebra.
Explanation:
who is better drake or juice world
Answer:
neither
Explanation:
they both suck :)
Have a great day
Answer:
Both of them
Explanation:
They are both better you can't choose because its like parents choosing who is their favorite child.
A potential difference of 24 V is applied to a 150-ohm resistor. How much current flows through the resistor?
Given :- A resistor of 150 ohm, hence Resistance (R) = 150 ohm
Potential Difference (v) = 24 V
Current (I) = ?
V = IR
24 = I × 150
I = 24/150
I = 0.16 ampere
hope it helps!
Heat pumps move heat from __________ to __________ areas & REQUIRES energy. *
A. cold, hot
B. hot, cold
What is the electrical power when the current is 20 amps and the voltage is 15 volts? *
A. 35 watts
B. 1.33 watts
C. 300 watts
Work is a transfer of matter. *
A. True
B. False
Which energy output objects work with the turbine?
Examples of pure substances are elements and _________.
A. Mixtures
B. Compounds
Answer:
b
Explanation:
Answer:
b
Explanation:
trust
What major purposes do barrier islands serve?
Answer:
Barrier islands serve two main functions. First, they protect the coastlines from severe storm damage. Second, they harbor several habitats that are refuges for wildlife.
Explanation:
O rază de lumină cade sub un unghi de incidență i=30⁰ pe o suprafață
plană ce separă două materiale transparente cu indici de refracție n 1 = 1,60
și n 2 = 1,40.
Calculați unghiul de refracție (din mediul cu indicele de refracție mai mic).
Sugestie: sin 30⁰ = ½.
Answer:
Explanation:
The question in english is:
A ray of light falls under an angle of incidence of 30 degrees on a flat surface that separates two transparent materials with indexes of refractions 1.60 and 1.40, respectively.
Calculate the angle of refraction (from the environment with the lower index of refraction)
Solution
According to Snell's Law :
[tex]n_{1}sin(\theta_{1})=n_{2}sin(\theta_{2})[/tex]
Where:
[tex]n_{1}=1.6[/tex] is the first medium index of refraction
[tex]n_{2}=1.4[/tex] is the second medium index of refraction
[tex]\theta_{1}=30\°[/tex] is the angle of the incident ray
[tex]\theta_{2}[/tex] is the angle of the refracted ray
We need to find [tex]\theta_{2}[/tex] from the equation above,
[tex]\theta_{2}=sin^{-1}(\frac{n_{1}}{n_{2}}sin\theta_{1} )[/tex]
[tex]\theta_{2}=sin^{-1}(\frac{1.6}{1.4}sin(30\°)[/tex]
[tex]\theta_{2}=34.84\°[/tex]
Therefore, the angle of refraction is 34.84°a 50 kg aardvark runs with a speed of 6 m/s. what is the kinetic energy of the aardvark
Answer:
900 J
Explanation:
0.5 x 50= 25 x 6^2= 900 J
The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.
Answer:
Pmax = 67.5 KN
Explanation:
We need to calculate the maximum allowable value of P for both aluminum and steel bars.
FOR STEEL BARS:
Since,
(σallow)st = (Pmax)st/A
where,
(σallow)st = maximum allowable stress of steel bar = 200 MPa = 2 x 10⁸ Pa
A = Cross-sectional area of steel bar = 450 mm² = 0.45 x 10⁻³ m²
(Pmax)st = Maximum allowable force for steel bar = ?
Therefore,
2 x 10⁸ Pa = (Pmax)st/0.45 x 10⁻³ m²
(Pmax)st = (2 x 10⁸ Pa)(0.45 x 10⁻³ m²)
(Pmax)st = 9 x 10⁴ N = 90 KN
FOR Aluminum BARS:
Since,
(σallow)al = (Pmax)al/A
where,
(σallow)al = maximum allowable stress of Al bar = 150 MPa = 1.5 x 10⁸ Pa
A = Cross-sectional area of Aluminum bar = 450 mm² = 0.45 x 10⁻³ m²
(Pmax)al = Maximum allowable force for Aluminum bar = ?
Therefore,
1.5 x 10⁸ Pa = (Pmax)al/0.45 x 10⁻³ m²
(Pmax)al = (1.5 x 10⁸ Pa)(0.45 x 10⁻³ m²)
(Pmax)al = 6.75 x 10⁴ N = 67.5 KN
Since,
(Pmax)al < (Pmax)st
Therefore,
The maximum allowable force will be:
Pmax = (Pmax)al
Pmax = 67.5 KN
What would happen to a current in a circuit if the resistance is multiplied by four
Answer:
The current would be multiplied by 1/4, meaning it is reduced by 3/4 of itself.
Explanation:
This is because when the resistance increases, the current decreases along with it.
Choose the best definition for velocity
1. How fast something is going
2. Speed in a certain direction
3. Which direction something is going
4. Something speeding up
Which happens during the day at the beach?
A. The water is warmer than the land, and air sinks over the water
B. The water is cooler than the land, and air sinks over the water
C. The water is warmer than the land, and air rises over the water
D. The water is cooler than the land, and air rises over the water
Answer:
c
Explanation:
not sure i think heating beach
Two tuning forks are played at the same time. One has a frequency of 176 Hz and the other is 178 Hz. How many beats per second are heard?
Answer:
There is 2 beats per second.
Explanation:
You have to subtract them to find your answer and 178 - 176= 2
The activity of a radioactive material drops to 1/16 of its original value in 20 years. What is its half life?
Answer: 5 years
Explanation:
Expression for rate law for first order kinetics is given by:
[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]
where,
k = rate constant
t = age of sample
a = let initial amount of the reactant = x
a - x = amount left after decay process = [tex]\frac{x}{16}[/tex]
a) for calculating k
[tex]20=\frac{2.303}{k}\log\frac{x}{\frac{x}{16}}[/tex]
[tex]k=\frac{2.303}{20}\log{16}[/tex]
[tex]k=0.138years^{-1}[/tex]
b) for calculating half life:
Half life is the amount of time taken by a radioactive material to decay to half of its original value.
[tex]t_{\frac{1}{2}}=\frac{0.693}{0.138years^{-1}}[/tex]
[tex]t_{\frac{1}{2}}=5years[/tex]
Thus its half life is 5 years
How do catalysts and inhibitors affect reaction rates
Please I'm in desperate help
Answer:
You know that catalysts lower the activation energy required for a reaction to occur. With the activation energy lower, the products can also combine more easily. Therefore, the forward and reverse reactions are both accelerated. It changes both rates and usually changes the equilibrium point.
Explanation:
hope it helps
A crate is being lifted into a truck. If it is moved with a 2470 N force and 4850 J of work is done, then how far is the crate being lifted?
Answer:1.96m
Explanation:
Work=4850J
Force=2470N
Distance =work ➗ force
Distance =4850 ➗ 2470
Distance =1.96m
A rectangular loop of wire that can rotate about an axis through its center is placed between the poles of a magnet in a magnetic field with a strength of 0.40 T. The length of the loop L is 0.16 m and its width w is 0.040 m. What is the magnetic flux through the loop when the plane of the loop is perpendicular to the magnetic field?
Explanation:
hope this helps you...........
The magnetic flux through the loop when the plane of the loop is perpendicular to the magnetic field is 0.0256 Weber.
What is magnetic field?The magnetic field is the region of space where a charged object experiences magnetic force when it is moving.
The formula for magnetic flux is given as;
φ = BAcosθ
Given, a rectangular loop of wire that can rotate about an axis through its center is placed between the poles of a magnet in a magnetic field with a strength of 0.40 T. The length of the loop L is 0.16 m and its width w is 0.040 m.
Area of the loop = L x w
A = 0.16 x 0.040 m
A = 0.0064 m²
So, flux will be
φ = 0.4 x 0.0064 x cos90°
φ = 0.00256 Wb
Thus, magnetic flux through the loop when the plane of the loop is perpendicular to the magnetic field is 0.0256 Weber.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ2
Un semáforo de 80N cuelga del punto medio de un cable de 30m tendido entre 2 postes. Halle la tensión en cada segmento del cable si éste tiene un pandeo que lo hace descender una distancia vertical de 1m
Answer:
T1 = T2 = 602.33 N
Explanation:
I attached an image of the forces diagram below.
The x component of the forces for this cases is:
[tex]\Sigma F_x=T_1cos\theta-T_2cos\theta=0\\\\T_1cos\theta=T_2cos\theta\\\\T_1=T_2[/tex]
And the y components:
[tex]\Sigma F_y=T_1sin\theta+T_2sin\theta-W=0\\\\T_1=T_2=T\\\\\Sigma F_y=2Tsin\theta=W\\\\T=\frac{W}{2sin\theta}[/tex]
The angle is calculated by using the information about the length of the cable and the vertical distance of the traffic light:
[tex]\theta=tan^{-1}(\frac{1}{15})=3.81\°[/tex]
Thus, you obtain:
[tex]T=\frac{80N}{2(sin3.81\°)}=601.33N[/tex]
hence, the tension in both segments of the cable is 602.33 N
This diagram shows a baseball’s motion. Which statement is best supported by the diagram?
a
Maximum Gravitational potential energy is at point R.
b
Kinetic energy becomes potential energy between points P and Q.
c
Kinetic energy becomes potential energy between points R and S.
d
Maximum kinetic energy is at point R.
Answer:
A
Explanation:
maximum gravitional potential energy is at point R
explain nuclear fusion briefly
Answer:
Nuclear fusion is the process in which two atomic nuclei are fused together into a larger single nucleus, releasing energy in the process. ... In proton-proton fusion, four hydrogen atoms are fused into a single helium-4 atom, releasing a lot of energy in the process.
Explanation:
What is motion ,terms used to measure motion ,examples etc
Answer:
A physic term
Explanation:
Answer:
Cambio de lugar o de posición de un cuerpo en el espacio.
Explanation:
