Fill in the [?]
1.7 km = [?]m
Give your answer in standard form.

The frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m is  5.40 x 10^14 Hz. Therefore, option B is correct.

The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength. This length is typically specified in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).

The wavelength is the distance between two wave crests, and it is also the distance between two wave troughs. The frequency is measured in cycles per second (Hz) and is the number of vibrations that pass over a given spot in one second (Hertz).

Speed is distance over time, Therefore, v = λ / T.

The frequency, f, is 1/T, so the equation relating wave speed, frequency, and wavelength is v = c / λ .

Given :

Wavelength = 5.56 x 10^-7 m

Frequency = ?

Speed (c) = 3 × 10⁸m/s

v = c / λ

By substituting given values in equation and we get,

v =  3 × 10⁸ / 5.56 x 10^-7

= 5.40 x 10^14

The frequency of yellow light is 5.40 x 10^14.

Thus, option B is correct.

To learn more about the wavelength, follow the link;

https://brainly.com/question/13533093

#SPJ6

n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.

Thin layer chromatography involves the separation of a mixture using a stationary phase made of  silica gel on a glass plate and an appropriate mobile phase. The extent of separation is highly dependent on the magnitude of interaction between the solute and the mobile phase. and stationary phase.

The first step in thin layer chromatography is to make a thin mark at the bottom portion of the plate then spot the plate with the sample. The mobile phase is now introduced into the TLC chamber a little below the mark. The plate is now placed in the stationary phase such that the mark is above the solvent level.

The TLC chamber is now covered and enough time is allowed for separation to occur. The spots can be seen using a suitable indicator dye or with a the aid of UV light

After the  separation of a homogeneous, liquid mixture containing benzoic acid, n-propylbenzene, and phenol, provided a 4:1 hexane to ethyl acetate solution as the eluent, we can see that n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.

Learn more: https://brainly.com/question/967776

Answer:

A or D because B and C dont make sense

Answer:

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

f is the force

m is the mass

From the question we have

[tex]a = \frac{5}{10} = \frac{1}{2} = 0.5 \\ [/tex]

We have the final answer as

Hope this helps you

Answer:The mass of oxygen gas sample collected over water is 0.544 g.

The given parameters;

temperature of the oxygen gas, t = 25 °C

total pressure of the gas, P = 644 torr

volume of the gas, V = 500 mL

vapor pressure = 23.8 torr

molar mass of oxygen gas = 32 g/mol

The number of moles of the gas collected is calculated by using ideal gas equation as follows;

PV = nRT

where;

R is the ideal gas constant = 62.36 L.torr/mol.K

P is the pressure of the gas = 644 torr - 23.8 torr = 620.2 torr

T is the temperature of the gas = 25 + 273 = 298 K

V is the volume of the gas = 500 mL = 0.5 L

The number of moles of the  gas is calculated as follows;

The mass of oxygen gas collected is calculated as follows;

m = 0.017 (32 g/mol)

m = 0.544 g

Thus, the mass of oxygen gas sample collected over water is 0.544 g.

Explanation:

The partial pressure of oxygen is; 760.0 torr - 23.8  torr = 736.2 torr.

We know that in a mixture of gases, the pressure that is exerted by each gas is called the partial pressure of the mixture.

In this case, we have the total pressure of the mixture as 760.0 torr and the vapor pressure of water as 23.8 mm Hg or 23.8  torr) at that temperature. Hence, the partial pressure of oxygen is; 760.0 torr - 23.8  torr = 736.2 torr.

Learn more about partial pressure:https://brainly.com/question/14281129

#SPJ2

Answer:

The mass of an atom based on the mass of an atom of carbon-12

Explanation:

Answer:

Cu3 (PO4)2

3×64 + 2×(31+ 4×16)

192 + 2×(31+64)

192 + 2×(95)

192+190

=382g

Answer:

Nuclear transmutation

Explanation:

The process in which an element spontaneously transforms into another isotope of the same element, or into a different element is called nuclear transumutation. It occurs when the number of protons or neutrons in the nucleus of an atom is changed.

Answer:

please mark as brainliest

Explanation:

Any substance that inhibits the growth and replication of a bacterium or kills it outright can be called an antibiotic. Antibiotics are a type of antimicrobial designed to target bacterial infections within (or on) the body. This makes antibiotics subtly different from the other main kinds of antimicrobials widely used today:

Antiseptics are used to sterilise surfaces of living tissue when the risk of infection is high, such as during surgery.

Disinfectants are non-selective antimicrobials, killing a wide range of micro-organisms including bacteria. They are used on non-living surfaces, for example in hospitals.

Of course, bacteria are not the only microbes that can be harmful to us. Fungi and viruses can also be a danger to humans, and they are targeted by antifungals and antivirals, respectively. Only substances that target bacteria are called antibiotics, while the name antimicrobial is an umbrella term for anything that inhibits or kills microbial cells including antibiotics, antifungals, antivirals and chemicals such as antiseptics.

Most antibiotics used today are produced in laboratories, but they are often based on compounds scientists have found in nature. Some microbes, for example, produce substances specifically to kill other nearby bacteria in order to gain an advantage when competing for food, water or other limited resources. However, some microbes only produce antibiotics in the laboratory

Answer:

Antibiotics commonly are produced by soil microorganisms and probably represent a means by which organisms in a complex environment, such as soil, control the growth of competing microorganisms. Microorganisms that produce antibiotics useful in preventing or treating disease include the bacteria and the fungi.

Explanation:

source: trust me bro

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct statement is ~

As we can observe, there's heat in product side of the given equation that shows - In the given reaction heat is released making it an exothermic reaction ~

I hope it helps ¡

[tex]\mathrm{✌TeeNForeveR✌}[/tex]

Answer:

Sound Travels

Explanation:

Sound waves can travel, and that makes it so that even though Marco is in a different room, he can hear the music. Depending how loud the music is and how thick the walls car, the sound can travel through the walls.

Answer:

To perform photosynthesis, plants need three things: carbon dioxide, water, and sunlight

[tex]\\ \sf\longmapsto Work=Force\times Displacement [/tex]

[tex]\\ \sf\longmapsto Force=\dfrac{Work}{Displacement}[/tex]

[tex]\\ \sf\longmapsto Force=\dfrac{2400}{6}[/tex]

[tex]\\ \sf\longmapsto Force=400N[/tex]

Answer:

If the reaction loses heat it is exothermic.

Answer:

1:

•a typical metal tends to have a higher melting and boiling point than a typical non metal which has a low melting and boiling point

•a typical metal tends to have a shiny appearance than a typical non metal which has a dull apearance

•and finally, a typical metal is a good conductor of electricity and heat while a typical non metal isn't

2:

elements E and C

3:

a, it doesn't conduct electricity

b, it's a good conductor of heat/ has a high melting point/ has a high boiling point (you can choose either that sits right with you)

Answer:

1.Phenolphthalein

2.Method

a.Use the pipette and pipette filler to add 25 cm 3 of alkali to a clean conical flask.

b.Add a few drops of indicator and put the conical flask on a white tile.

c.Fill the burette with acid and note the starting volume.

d.Slowly add the acid from the burette to the alkali in the conical flask, swirling to mix.

Explanation:

Answer:

1 marcomolecules are:- A macromolecule is a very large molecule, such as a protein. They are composed of thousands of covalently bonded atoms. Many macromolecules are polymers of smaller molecules called monomers.

2 polymers are:- a natural or artificial chemical compound consisting of large molecules

Explanation:

hope it helps you

it's a balance between that reaches the earth and the sun.

Can I have brainlist please

Answer:

Pressure Cooking

Explanation:

Pressure cooking is a very old cooking method that’s experienced a recent resurgence thanks to a new generation of cookers that promise a speedy, set-it-and-forget-it path to dinner. These devices, whether electrical or stovetop, are all much safer than those of decades ago (which tended to explode), with mechanisms to prevent them from accumulating too much pressure. If you read the owner’s manual carefully, however, you’ll still find one important precaution to take when cooking under pressure: adding water. Water and pressure cooking go hand in hand. In fact, it’s water that helps generate the high-pressure environment that makes your food cook faster.

Most pressure cooker instructions state a minimum amount of water required for pressure cooking even a tiny amount of food. Inside the tightly sealed pressure cooker, the water is heated and eventually boils into steam. Since the steam cannot escape, it collects above the food. All those trapped water molecules increase the pressure inside the cooker.

Answer:

True.

Explanation:

In metallic bonds, nuclei of metal atoms line up uniformly and the electrons are delocalized (spread out evenly). Since this allows electrons to move around freely, and electricity is created by the flow of electrons, metals can conduct electricity.

Taking into account the reaction stoichiometry and the definition of molar mass, the quantity of HgO used is 0.01385 moles and 0.006925 moles of O₂ are formed when 3.00 grams of HgO was used.

In first place, the balanced reaction is:

2 HgO → 2 Hg + O₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

You know that 3.00 grams of HgO was used. Then, the quantity in moles of HgO used, can be calculated using the molar mass of HgO as follow:

[tex]3 gramsx\frac{1 mole}{216.59 grams}[/tex]=  0.01385 moles

Finally, the quantity of HgO used is 0.01385 moles.

To determine the number of moles of oxygen gas formed, the following rule of three can be applied: if by reaction stoichiometry 2 moles of HgO form 1 mole of O₂, 0.01385 moles of HgO form how many moles of O₂?

[tex]amount of moles of O_{2} =\frac{0.01385 moles of HgOx1 mole of O_{2} }{2 moles of HgO}[/tex]

amount of moles of O₂= 0.006925 moles

Then, 0.006925 moles of O₂ are formed when 3.00 grams of HgO was used.

Learn more:

Explanation:

According to Charles law : V/T=k (constant).

the volume temperature relationship will be

V/T = 117.5/25 = 4.7

hope this helps you.

The answer is Electronegativity.

Answer:7.25

Explanation:

This is because 18.2 - 7.2 = 11 +7.2 = 18.2

The picture that correctly shows the path of the reflected light ray is: Picture A.

A ray diagram can be defined as the graphical representation of the possible paths that a light wave takes from one point (source) to another.

Basically, some of the phenomenon and properties associated with light ray include the following:

A reflected light ray completely bounces off a surface and as such, light wave do not pass through the surface as illustrated in Picture A.

Read more on reflected light here: https://brainly.com/question/14320820

Answer:

the water in the mountains will take longer to boil, because of the higher atmospheric pressu