Answer:
D= m/ V
D = density of mercury , m= mass , V= Volume
D = 2790 / 205
D = 13.6 g/ml
D = 1.36 ×10-¹ g/ml
I hope I helped you^_^
Polar molecules have partial positive and partial negative charges. An electrical
attraction between the partial positive charge of one polar molecule and the partial
negative charge of another polar molecule is called a/an
Answer:
Image result for Polar molecules have partial positive and partial negative charges. An electrical attraction between the partial positive charge of one polar molecule and the partial negative charge of another polar molecule is called a/an
A polar molecule has a net dipole as a result of the opposing charges (i.e. having partial positive and partial negative charges) from polar bonds arranged asymmetrically. Water (H2O) is an example of a polar molecule since it has a slight positive charge on one side and a slight negative charge on the other.
Explanation:
The amount of energy required to separate 1 mole of ions in a crystalline solid into separate gaseous ions is called _____ energy. This energy provides a measure of the strength of a(n) _____ bond, since the stronger the bond, the _____ the amount of energy required to break it.
Answer: A) Are you asking for the production of "ions" from a solid? Or are you asking for the formation of gases. For gases, this is called "energy of vaporization."
B) "Lattice," I am guessing.
C) Greater
Explanation: Most molecules enjoy their existance as solids (not all) due to the intermolecular forces that attract the molecules to each other. These are largely hydrogen and ionic bonds. Hydrophobic compounds don't always share this enthusiam to stick together. Gasoline is happy to leave it's relatives behind and it's Up, Up, and Away.
71. The density of osmium (the densest metal) is 22.57 g/cm². If a
1.00-kg rectangular block of osmium has two dimensions of
4.00 cm x 4.00 cm, calculate the third dimension of the block.
Answer:
y = 2.77 cm
Answer: The third dimension is 2.77 cm
define mitochondria.
Answer:
An organelle found in large numbers in most cells, in which the biochemical processes of respiration and energy production occur. It has a double membrane, the inner part being folded inwards to form layers (cristae).
Explanation:
(Forgot to ask this question last time)
Which is true about molecules?
A. A molecule is two or more atoms joined
together.
B. A molecule is two or more protons joined
together.
C. A molecule is two or more neutrons bonded
together.
Answer:
A is the correct answer.
Which of the following statements correctly explains why the excretory system is different from the digestive system? (1 point)
The excretory system is different from the digestive system because it removes waste from the body by filtering water, which
includes mostly the by-products of metabolism.
The excretory system is different from the digestive system because it removes waste from the body by filtering urine, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering food, which
includes mostly the by-products of metabolism. filtering food
SS
2
The excretory system is different from the digestive system because it removes waste from the body by filtering blood, which
o
includes mostly the by-products of metabolism
U.
Hey
Answer:
The excretory system removes waste from the body. remove waste from the blood. The digestive system breaks down the food you eat into nutrients that provide energy and building materials for cells. The digestive and excretory sytems work together to process the food that you eat.
place the letters on the spectrum below from least scientific two more scientific A. All living things are composed of one or more cells. We know this because every living thing examined to date has
been found to be composed of one or more cells.
B. If you break a mirror, you will have seven years of bad luck.
C. The Earth is flat. Anybody can see that!
D. Taking Vitamin C prevents the common cold. Linus Pauling, the Nobel laureate who discovered the structure of
Vitamin C, says it does.
E. Humans have a soul. I believe this because it says so in the Bible. The soul is what separates us from animals.
F. The rate of acceleration of all falling objects on Earth is constant. Two spheres of identical diameter and volume are
dropped from the top of a building; one is made of steel, the other made of a plastic polymer. They both will accel-
crate at the same rate (32 ft/s) and hit the ground at the same time.
Answer: B, C, E, D, A, F
Explanation: It is a little difficult to assign a regid order to these statements. Much depends on one's definition of "more scientific." My thoughts:
B: Only in the movies
C: Flat Earthers still exist, but no one has ever fallen off the edge, that I'm aware of
E: I've had a few pets with souls. My cat has it in for me.
D: I met Linus Pauling twice - he was too enthusiastic with his vitamin C and did not critically evaluate the evidence, but he was far more correct than the Flat-Earthers.
A: Lots of good evidence, although it can also depend on the definition of "living," Is a virus "living?"
F: Yep, I've done it myself. Heavier object have more inertia - they are the couch potatoes of physics. They will take their own time to get moving.
What do the nuclei of 1H hydrogen atoms contain?
protons only
electrons and protons
electrons and neutrons
neutrons only
Answer:
"Protons only"
Explanation:
Hydrogen has one proton in its nucleus. It does have one electron rotating outside of the nucleus, BUT NOT IN THE NUCLEUS. 'A' is the correct answer.
How has modern research in
chemistry impacted society?
Artificial products, medicines, and fertilizers are examples of chemistry discoveries that have had the greatest impact on the modern world. Polymer discovery has resulted in all the plastics and synthetic fabrics that surround us today.
What is the importance of research in chemistry?Understanding how the properties of substances are related to their molecular structures allows chemists to design new molecules and materials with the desired properties, as well as develop or invent new types of transformations for carrying out the syntheses of these substances.
Chemistry is used in almost every aspect of today's automobiles, from the exterior paint, bumpers, and headlights to the interior seats, dashboard components, and seatbelts and airbags that protect passengers.
To name a few, industrial applications of chemistry have a direct impact on our daily lives: what we eat, what we wear, how we travel, the technology we use, how we treat illnesses, and how we get electricity. Chemistry research is constantly deepening our understanding and leading to new discoveries.
To learn more about the research in chemistry, follow the link;
https://brainly.com/question/3628862
#SPJ6
Which is most useful in classifying stars? (1 point)
A. knowing the movements of a star
B. knowing the size of a star
C. knowing the apparent magnitude of a star
D. knowing the color and brightness of a star
Answer:
B. Knowing the color and brightness of a star
Explanation:
I’m having trouble on problem number 5. and I can’t find the answer, and I could really use some help.
is it correct what I have done
Anss\zyew:yes,the answer is very normal and well done
during the interconversion of state of matter, mass undergoes and change? true or false
True.
The Mass Undergoes change only in ( Solid state to liquid state ) Ice Cube to Water .
Mass changes from mg to litre.
[tex]\huge\mathfrak\red{hope \: it \: helps}[/tex]
This is an image of ice
cubes made of water. Is
water (or ice) a mixture or a
compound made up of
molecules?
А.
a mixture
В.
a compound made up of molecules
Answer:
it is a compound made up of molecules
question : what are isotopes
Answer:
Isotopes are versions of the same element. They have the same number of protons and electrons as the element but different mass numbers and number of neutrons.
Explanation:
one of two or more species of atoms of a chemical element with the same atomic number and position in the periodic table.
A piece of metal has a volume of 30.0 cm and a mass of 252 g . What is its density?
What metal do you think this is?
density = mass/volume
252/30 = 8.4 g/cm3
The metal is likely to be Nichrome
What is Density?
The Density of a material is the mass per unit volume
say the mass is m kg
and the volume is v cm^3
Then the density is
Density = mass/volume
Given data
Mass = 252g gram
volume = 30 cm^3
Hence the density can be calculated as
Density = 252/30
Density = 8.4 g/cm^3
From the value, this corresponds to the density of Brass
for more information visit https://brainly.in/question/2786638
Does an astronaut have more mass on earth then space? why or why not?
Answer:
No
Explanation:
No, his mass remains the same no matter where he is in the universe.
But then again the moon has less gravitational pull, therefore your weight and mass will be smaller in space and on the moon than on earth
I hope this was helpful! ;)
Which statement about metals and nonmetals is correct? (1 point)
O Metals and nonmetals can both be found in any column of the periodic table.
O Most metals are a solid under normal conditions, and most nonmetals are a liquid.
O Metals tend to be poor conductors of electricity, while nonmetals are strong conductors of electricity.
O Metals can be hammered into thin sheets, and nonmetals are brittle
Answer:
The answer is the 4th one
The statement about metals and nonmetals that is correct is: "The Metals can be hammered into thin sheets, and nonmetals are brittle."
Metals are found mostly towards the left hand side of the periodic table. Non-metal character increases as you move towards the right hand side of the table.
One common property of metals is that they are malleable; this means that they can be hammered into sheets while a common property of nonmetals is that most of them are brittle.
Learn more: https://brainly.com/question/10714037
Write electronic configuration of first 30 elements in their sub shell
Answer:
Helium (He) 1s2
Lithium (Li) [He] 2s1
Beryllium (Be) [He] 2s2
Boron (B) [He] 2s2 2p1
Explanation:
please mark me brainleast
A car start from rest and covers distance of 100m after 10seconds.if the acceleration is 2m/s square, calculate the final velocity..
Answer:
20 m/s
Explanation:
solution,
initial velocity (u)=0 m/s
Distance covered(s)=100m
Time taken(t)=10 seconds
Acceleration (a)=2m/s²
Now,
By using first equation of motion, we have
v=u+at
=0+2×10
=20 m/s
I hope it helped U
stay safe stay happy
Measurements of the heights of various plants in an experiment are called
Answer:
Option 1 Data
Answer:
data
Explanation:
that is the answer
please 5 stars
Could someone plz help me
Answer:
A
Explanation:
B: not B. Opinions don't matter. Facts do.
C: its a consideration. It will limit the scope of the experiment. But it's not relevant to the investigation. Not C
D: You might want to contact some scientists to see what they think about your investigation, but randomly interviewing anyone and everyone is not the answer.
You want to do A for certain.
How many moles are there in 4.6g of sodium
Answer:
0.20moles
Explanation:
1 mole Na contains 23 g Na
23 g Na =1 mole of Na
1 g Na= 1/23 moles of Na
4.6 g Na= 1/23×4.6= 4.6/23=0.2 moles
Therefore 0.2 moles are present in 4.6 g of Na
Answer:
the 4.6g sodium has 0.2 moles
Iron is a type of metal that has a shiny surface. However, iron can rust easily. Explain
Answer:
Iron, as well as iron alloys, rusts because of a chemical reaction known as oxidation. When iron is exposed to moisture or oxygen, oxidation occurs. During this chemical reaction, iron is converted into iron oxide. ... Both oxygen and moisture are catalysts for rusting.
Answer:
Iron rusts because of of a chemical reaction known as oxidation. During the chemical reaction iron is converted to iron oxide, if it is left unaddressed, the iron oxide will spread, thereby jeopardizing the physical integrity of the iron.
A hydrogen electron is elevated from level 1 to level 2. Another electron is elevated from level 2 to level
4. The transition requiring the greatest energy change is
DONE
Intro
Answer
level 2 to 4
Explanation:
i guessed cause im just that cool
Why are intensive properties useful for identifying a substance?
a
They are chemical properties.
b
They describe the amount of substance you have.
c
They are physical properties.
d
They do not depend on the amount of substance you have.
Answer:
d
They do not depend on the amount of substance you have.
Intensive properties useful for identifying a substance because they do not depend on the amount of substance you have.
WHAT ARE INTENSIVE PROPERTIES:
Intensive properties are physical properties of a substance that do not depend on the size or amount of a sample e.g. density, temperature, colour, boiling point etc. On the other hand, extensive properties are dependent on the size of a substance e. g. mass, volume, weight etc. Intensive properties of a substance do not change with respect to size, hence, they can be used in the identification of a substance.Learn more: https://brainly.com/question/3006850?referrer=searchResults
Arrange the gases in increasing order of the number of atoms that make up its molecule, from left to right.
Cl₂-CH₄-SO₂-CH₂O-C₂H₄.
thank you!
Answer:
C₂H₄-CH₄-CH₂O-SO₂-Cl₂
Explanation:
The arrangement of gases in increasing order of the number of atoms that make up its molecule, from left to right, is C₂H₄-CH₄-CH₂O-SO₂-Cl₂.
What are gases?
Gas is one of the matters. It's invisible, and its particles are present very far away from each other. The atoms of the gas move randomly, and they are always in motion.
There are iii kinds of matter, solid, liquid, and gas. When there is a modification in temperature when there is a rise in temperature the solid becomes liquid and eventually, the liquid becomes gas.
The arrangement of gases in it increases the order of the number of atoms. So it can be identified by seeing the moles of elements that are shown in the chemical formula of gas.
Thus, the arrangement of gases is C₂H₄-CH₄-CH₂O-SO₂-Cl₂.
To learn more about gases, refer to the link:
https://brainly.com/question/10110040
#SPJ2
Which of the following is an example of climate?
The polar regions have long winters and short, cool summers.
Humidity levels are high today.
Canada experienced an unusually warm summer this year.
Tornados formed across Oklahoma yesterday.
Answer:
"The polar regions have long winters and short, cool summers."
Explanation:
Climate is the average of that weather. The climate record also includes extreme values such as record high temperatures or record amounts of rainfall.
For Climate example:
You can expect snow in the Northeast in January or for it to be hot and humid in the Southeast in July.
1. Why Isn't Hess's law helpful for calculating the heat of reaction Involved in the conversion of diamond to graphite?
Answer:
This law is not applicable or not helpful in the conversion of diamond to graphite because both are just allotropes of carbon along with C60 (Buckminsterfullerene or buckyball), C540, C70, amorphous carbon, and carbon nanotube
Explanation: did that help? hope it did!
Which equation represents a decomposition reaction?
O 4P +502 → 2P205
O H2SO4 + 2NaOH → Na2SO4 + 2H2O
O 2C8H18 + 2502 → 16CO2 + 18H2O
O 6NaNO3 → 6NaNO2 + 302
There are various type of chemical reactions in chemistry like combination reaction , displacement reaction. One of these is the decomposition reaction. The correct option is option D.
What is decomposition reaction?Decomposition reaction is the one in which molecules breaks down in its constituent in presence of energy. Energy can be in any form, it can be light energy , heat energy.
Decomposition of water is done by providing electricity and the reaction is called electrolysis. Lysis means to break. To give decomposition reaction molecule must have more than one element.
The fourth reaction describe a decomposition reaction (NaNO3 decomposed to become NaNO2 and O2). First and third reaction are considered combustion reaction (reacting with oxygen). Second reaction is acid-base reaction.
Therefore, the correct option is option D.
To learn more about decomposition reaction, here:
https://brainly.com/question/13134296
#SPJ2
