Find the measure of the last angle of the triangle below.
28⁰
35°

The shortest interval that contains 95% of the debt values is $9,492.02 to $20,507.98

Given that a credit risk study found that an individual with good credit score has an average debt of $15,000 and the debt of an individual with good credit score is normally distributed with standard deviation $3,000.

Then the 95% confidence interval can be calculated as follows:

Upper limit: µ + Zσ

Lower limit: µ - Zσ

Where

The z-score corresponding to a 95% confidence interval can be found using the standard normal distribution table.

The area to the left of the z-score is 0.4750 and the area to the right is also 0.4750.

The z-score corresponding to 0.4750 can be found using the standard normal distribution table as follows:z = 1.96Therefore

Upper limit: µ + Zσ= $15,000 + 1.96($3,000) = $20,880

Lower limit: µ - Zσ= $15,000 - 1.96($3,000) = $9,120.02

The shortest interval that contains 95% of the debt values is $9,492.02 to $20,507.98.

See more about confidence interval at: https://brainly.com/question/15712887

#SPJ11

Answer: 1.2 miles

Step-by-step explanation:

1 hour = 60 min

60 x 0.02 = 1.2         1 minute and 20 seconds has elapsed

60 miles/ every 60 minutes or 1 mile a minute

1 x 1.2 = 1.2

she has traveled 1.2 miles

Answer: The answer is 120 mph (miles per hour)

Step-by-step explanation:

The one thing you need to do is to figure out how many mph did Ella drive for 2 hours.

So, you need to do 60 x 2, and you will get the answer 120.

And there's your answer!

The percentage of customers who do not purchase clubs or balls is 0.66 or 66%.

Ten percent of customers who walk into a golf store purchase a golf club and 30% of customers purchase golf balls. Six percent of customers purchase both clubs and balls. The percentage of customers who do not purchase clubs or balls is 0.66.

Given that, The percentage of customers who purchase golf clubs = 10%The percentage of customers who purchase golf balls = 30%The percentage of customers who purchase both clubs and balls = 6%To find out the percentage of customers who do not purchase clubs or balls, we have to subtract the percentage of customers who purchase either clubs or balls or both from 100%.

Percentage of customers who purchase either clubs or balls or both = 10% + 30% - 6% = 34% Percentage of customers who do not purchase clubs or balls = 100% - 34% = 66%.

Learn more about Percentage

brainly.com/question/29306119

#SPJ11

Answer:

"9 more than A" is a verbal expression.

Therefore, the measure of ∠D is approximately 60.96 degrees.

A measure is a function that assigns a number to each set in a given space, typically with the goal of describing the size or extent of the set. For example, the Lebesgue measure is a way of assigning a "volume" to sets in n-dimensional Euclidean space.

by the question.

To find the measure of ∠D in a right triangle with sides of 25 feet and 45 feet, we can use the inverse tangent function:

[tex]tan(∠D) = opposite/adjacent = CD/BC = 45/25[/tex]

Taking the inverse tangent of both sides, we get:

[tex]∠D = tan⁻¹(45/25) = 60.95 degrees[/tex]

Rounding this to the nearest hundredth, we get:

[tex]angleD = 60.95 degrees =60.96 degree.[/tex]

To learn more about tangent:

https://brainly.com/question/19064965

#SPJ1

Answer:

The answer to 1 + 1 is 2.

Very complicated problem, please mark brainliest!

Answer:

1+1 = 2

Or, 1=2-1

1=1

we know value of one is one

so,

1+1=11

The total cost of compensated absences for Tamarisk Company for the years 2019 and 2020 was $348 + $1,399 = $1,747.

To calculate the cost of compensated absences for Tamarisk Company, we need to calculate the number of vacation days and sick days earned by the employees in 2019 and 2020, and then calculate the cost of the days earned but not taken.

Each employee earns 9 vacation days per year. As they can be taken after January 15th of the year following the year in which they are earned, the vacation days earned by the employees in 2019 can be taken in 2020. Therefore, in 2019, no vacation days were taken by any employee.

In 2020, the employees took a total of 8 vacation days. As there are 9 employees, the total vacation days taken in 2020 were 9 x 8 = 72.

Sick Days:

Each employee earns 7 sick days per year, and unused sick days accumulate. In 2019, the employees used a total of 5 sick days. Therefore, the unused sick days at the end of 2019 were 9 x 7 - 5 = 58.

In 2020, the employees used a total of 6 sick days, and the unused sick days at the end of 2020 were 58 + 9 x 7 - 6 = 109.

To find the cost of compensated absences. The unused sick days and vacation days must be multiplied to get the hourly wage rate in effect in a year.

In 2019, the cost of compensated absences was 58 x $6 = $348.

In 2020, the cost of compensated absences was (72 + 109) x $7 = $1,399.

Therefore, the total cost of compensated absences for Tamarisk Company for the years 2019 and 2020 was $348 + $1,399 = $1,747.

To know more about the cost of compensated absences

brainly.com/question/12987530

#SPJ4

Answer:

X

Step-by-step explanation:

We first must check the total amount of breakfast. Y happens to have 130 instead of 125. Now, we see that W and Z have a majority on strawberries with oatmeal, which is not what we are looking for. The last answer we have is X, where there is a majority of oatmeal + blueberries and there is a total of 125 breakfasts.

Hope this helps!

Answer:

To find the equation of the line passing through the points (5,-12) and (0,-2), we first need to find the slope of the line:

slope = (change in y) / (change in x)

slope = (-2 - (-12)) / (0 - 5)

slope = 10 / (-5)

slope = -2

Now that we have the slope, we can use the point-slope form of the line equation to find the equation of the line:

y - y1 = m(x - x1)

where m is the slope, and (x1, y1) is one of the given points on the line.

Let's use the point (5,-12):

y - (-12) = -2(x - 5)

y + 12 = -2x + 10

y = -2x - 2

Therefore, the equation of the line passing through the points (5,-12) and (0,-2) is y = -2x - 2.

The approximate area of the surface formed by revolving the polar equation over the given interval about the polar axis is 67.59 square units.

To solve the question, we can use the integration capabilities of a graphing utility to approximate to two decimal places the area of the surface formed by revolving the polar equation over the given interval about the polar axis. Polar curve is a type of curve that is made up of points that represent polar coordinates (r, θ) instead of Cartesian coordinates.

A polar curve can be represented in parametric form, but it is often more convenient to use the polar equation for a curve. According to the question, r = 7 cos(20), [0, Phi/4] is the polar equation and we need to find the approximate area of the surface formed by revolving the polar equation over the given interval about the polar axis.

To solve the problem, follow these steps: Convert the polar equation to a rectangular equation. The polar equation r = 7 cos(20) is converted to a rectangular equation using the following formulas: x = r cos θ, y = r sin θx = 7 cos (20°) cos θ, y = 7 cos (20°) sin θx = 7 cos (θ - 20°) cos 20°, y = 7 cos (θ - 20°) sin 20°

Sketch the curve in the plane. We can sketch the curve of r = 7 cos(20) by plotting the points (r, θ) and then drawing the curve through these points. Use the polar equation to set up the integral for the volume of the solid of revolution.

The volume of the solid of revolution is given by the formula: V = ∫a b πf2(x) dx where f(x) = r, a = 0, and b = Φ/4.We can find the volume of the solid of revolution using the polar equation: r = 7 cos(20) => r2 = 49 cos2(20) => x2 + y2 = 49 cos2(20)Thus, f(x) = √(49 cos2(20) - x2) = 7 cos(20°) sin(θ - 20°)

So, V = ∫a b πf2(x) dx = ∫0 Φ/4 π(7 cos(20°) sin(θ - 20°))2 dθStep 4: Use a graphing utility to evaluate the integral to two decimal places. Using a graphing utility to evaluate the integral, we get V ≈ 67.59.

Learn more about Interval

brainly.com/question/30486507

#SPJ11

The given third-order linear equation is (t - 2t^2)y' - 4y'' = -2t with y(3) = -2, y'(3) = 2, y''(3) = -3.

We can write this equation as a system of first-order linear equations with initial values by introducing three new variables x_1, x_2, and x_3 such that:

x_1 = y

x_2 = y'

x_3 = y''

with initial values x_1(3) = -2, x_2(3) = 2, x_3(3) = -3.

The resulting system of equations is:

x_1' = x_2

x_2' = x_3

x_3' = (2t^2 - t)x_2 - 4x_3 + 2t

This system can be solved numerically for the unknown functions x_1, x_2, and x_3 with the initial conditions given.

for such more questions on  linear equation

https://brainly.com/question/28732353

#SPJ11

Answer:

x = 4

Step-by-step explanation:

Alternative interior angles means these angles are equal in magnitude and sign

[tex]{ \tt{(20x + 10) = (10x + 50)}} \\ \\ { \tt{20x - 10x = 50 - 10}} \\ \\ { \tt{10x = 40}} \\ \\ { \tt{x = 4}}[/tex]

The equation has two distinct real roots if 64 - 4c > 0, one real root if 64 - 4c = 0, and no real roots if 64 - 4c < 0.

The discriminant of a quadratic equation of the form [tex]ax^2 + bx + c = 0[/tex] is given by [tex]b^2 - 4ac[/tex]. In the given quadratic equation, a = 1, b = 8, and c = c. Therefore, the discriminant is:

[tex]b^2 - 4ac[/tex]

[tex]= 8^2 - 4(1)(c)[/tex]

[tex]= 64 - 4c[/tex]

Now, we can use the discriminant to determine the nature of the solutions of the quadratic equation. If the discriminant is positive, the equation has two distinct real roots. If the discriminant is zero, the equation has one real root (a double root). If the discriminant is negative, the equation has no real roots (two complex conjugate roots).

In this case, we do not have enough information about the value of c to determine the nature of the roots of the equation. All we know is that the discriminant is 64 - 4c.

Hence, if 64 - 4c > 0, we can state that the equation has two separate real roots, one real root if 64 - 4c = 0, and no real roots if 64 - 4c < 0.

To know more about quadratic equation

brainly.com/question/30098550

#SPJ4

The monthly payment required to pay off a loan of $140,000 at 7% interest would be $776.89 is the correct statement(A).

The statement given is describing a function that relates the monthly payment R of a 25-year variable-rate mortgage loan to the loan amount A and the current interest rate i.

The given values are R = $776.89 and A = $140,000, with an interest rate of 7%. This means that the monthly payment required to pay off a loan of $140,000 at 7% interest would be $776.89.

However, the other statements are incorrect interpretations. For instance, the statement "For a loan of $140,000 at 7.7689% interest, 700 monthly payments would be required to pay off the loan" is incorrect.

This is because the number of payments required to pay off a loan depends not only on the loan amount and interest rate, but also on the term of the loan.

Similarly, the statement "For a loan of $140,000 at 7% interest, 776.89 monthly payments would be required to pay off the loan" is also incorrect, as the number of payments required would be determined by the term of the loan.

Finally, the statement "For a loan of $140,000 at 7.7689% interest, the monthly payment is $700" is also incorrect. This is because, for the given loan amount and interest rate, the monthly payment required would be $776.89, as calculated above.

For more questions like Interest click the link below:

https://brainly.com/question/13324776

#SPJ11

Answer:

a=1/3

Step-by-step explanation:

First, expand the brackets by doing multiplication:

2+6a+3=3a+6

Then, move the unknown to the left and the numbers to the right:

3a=6-5

3a=1

a=1/3

The solution to the given equation is -1.

In mathematics, an equation is a formula that expresses the equality of two expressions, by connecting them with the equals sign =.

The solution of an equation is the set of all values that, when substituted for unknowns, make an equation true.

The given equation is 2+3(2a+1)=3(a+2)

2+6a+3=3a+2

6a+5=3a+2

6a-3a=2-5

3a=-3

a=-1

Therefore, the solution to the given equation is -1.

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ2

16h^(10/2) *remove the root sign

16h^5 *simplify the exponent

Answer: 16h^5

Step-by-step explanation: im correct

An inverse of a modulo m for a = 55, m = 89 using the Euclidean algorithm is 34.

In order to find an inverse of a modulo for each of the following pairs of relatively prime integers using the Euclidean algorithm can be found by:

Using the Euclidean algorithm to find the greatest common divisor (gcd) of a and m. In this case, we have:

89 = 1 x 55 + 34

The gcd of 55 and 89 is 1.

Using the extended Euclidean algorithm, work backwards up the chain of remainders to express 1 as a linear combination of a and m. In this case, we have: 34 x 55 - 21 x 89

   The coefficient of a in the expression from step 3 is the inverse of a modulo m. In this case, the inverse of 55 modulo 89 is 34.

To verify that the inverse is correct, multiply a and its inverse modulo m. The product should be congruent to 1 modulo m. In this case, we have:

   55 x 34 = 1870

   11 = 1 x 11 + 0

Since the remainder is 0, we know that 55 x 34 is a multiple of 89, so it is congruent to 0 modulo 89. Therefore, we have:

55 x 34 ≡ 0 |89|

Adding 89 to the left-hand side repeatedly until we get a number that is congruent to 1 modulo 89, we find:

55 x 34 ≡ 0 + 89 x 7 ≡ 1 |89|

Therefore, the inverse of 55 modulo 89 is indeed 34.

To practice more questions about Euclidean algorithm:

https://brainly.com/question/24836675.

#SPJ11

Step-by-step explanation:

No,

if the sprinkler covers a distance of 12 m meaning the 12 m is the diameter...then to find the area that it covers we use the formula for the circle since it's circular

A=πr2

A=3.142*36

A=113.112 cm3

The sum of the geometric series is 3904/3125.

By using the formula for the sum of a geometric series, we'll have to identify the first term, the common ratio, and the number of terms.

Let's identify the first term, the common ratio, and the number of terms in the given series as shown below;

The first term, a = 4³/5³

Common ratio, r = 4/5

The number of terms, n = 3

We have identified the values of a, r, and n, we can now substitute them into the formula for the sum of a geometric series, shown below;

S_n = a(1 - rⁿ) / (1 - r)

S₃ = {(4³/5³) [1 - (4/5)³]} / [1 - (4/5)]

S₃ = {(64/125) [1 - (64/125)]} / [1/5]

S₃ = (64/125) [(125-64)/125] [5/1]

S₃ = (64/125) (61/125) (5)

Therefore, S₃ = 3904/3125.

Thus, the sum of the geometric series (4³/5³) + (4⁴/5⁴) + (4⁵/5⁵) is equal to 3904/3125.

To know more about the "geometric series": https://brainly.com/question/24643676

#SPJ11

The value of m∠B is 212 - 24x.

The totality of the angles in a quadrilateral is always amount to 360°. This is a primary property of all quadrilaterals, irrespective of their shape or size.

As a result, irrespective of the shape say if you are dealing with a square, rectangle, parallelogram, trapezoid, or any other type of quadrilateral, the totality of the angles will always be sum to 360°.

To determine the value of m∠B, one can employ the notion that the sum of the angles in a quadrilateral is 360°.

Thus,

m∠A + m∠B + m∠C + m∠D = 360

Substituting the given values, we get:

(16x)° + m∠B + (8x+20)° + 128° = 360

Simplifying and solving for m∠B, we get:

m∠B = 360 - (16x)° - (8x+20)° - 128°

m∠B = 212 - 24x

Therefore, the value of m∠B is 212 - 24x.

learn more about sum of the angles in a quadrilateral: https://brainly.com/question/17464621

#SPJ1

The perimeter of the smaller triangle would be = 28.1

A triangle can be defined as a three sided polygon that has a total internal angle of 180°.

To calculate the perimeter of the triangle is to find out the scale factor that exists between the two triangles.

The formula for scale factor = original object/new object

Scale factor= 8/7 = 1.14

The perimeter of the smaller triangle = 32/1.14

= 28.1.

Learn more about perimeter here:

https://brainly.com/question/25092270

#SPJ1

In summary, to find the null spaces of the matrices given in exercises 9 and 10, use the Gauss-Jordan elimination method and refer to the Remarks that follow example 3 in section 4.2 of the text. This will give the dimension of the null space and the number of free variables.
In exercises 9 and 10, the null space of the given matrices can be found by solving the homogeneous linear system of equations. In order to do this, use the Gauss-Jordan elimination method. Refer to example 3 in section 4.2 of the text for a detailed explanation. Afterwards, use the Remarks that follow the example to determine the dimension of the null space and the number of free variables.

The null space of a matrix is the set of all vectors that produce a zero vector when the matrix is multiplied by the vector. Therefore, to find the null space of a matrix, the homogeneous linear system of equations needs to be solved. The Gauss-Jordan elimination method involves adding multiples of one row to another to get a row with all zeroes. After this is done for all the rows, the equations can be solved for the free variables. The number of free variables will determine the dimension of the null space. Refer to example 3 in section 4.2 of the text for more details.

The Remarks that follow the example are important when determining the dimension of the null space and the number of free variables. In the Remarks, it is mentioned that the number of free variables is equal to the number of columns with a zero row. Therefore, after using the Gauss-Jordan elimination method to get the row with all zeroes, the number of columns with a zero row can be counted. This will give the dimension of the null space and the number of free variables.

for such more questions on  Gauss-Jordan elimination

https://brainly.com/question/20536857

#SPJ11

An interval is a set of real numbers that contains all real numbers lying between any two numbers of the set.

For each calculation, the smallest interval in which the result, using true instead of rounded values, must lie is as follows:

(a) 1.1062+0.947 = 2.0532 ≤ true result ≤ 2.053

(b) 23.46 - 12.753 = 10.707 ≤ true result ≤ 10.708

(c) (2.747) (6.83) = 18.6181 ≤ true result ≤ 18.6182

(d) 8.473/0.064 = 132.3906 ≤ true result ≤ 132.3907

To learn more about the “smallest interval” refer to the: https://brainly.in/question/52697950

#SPJ11

The inverse of the function g(x) is g⁻¹(x) = 0.5 + √(1.25 - x) and the value for x for which f(g(x)) = g(f(x))​ is 1

Given that

f(x) = 3 - 2x

Rewrite as

g(x) = -x² + x + 1

Express as vertex form

g(x) = -(x - 0.5)² + 1.25

Express as equation and swap x & y

x = -(y - 0.5)² + 1.25

Make y the subject

y = 0.5 + √(1.25 - x)

So, the inverse is

g⁻¹(x) = 0.5 + √(1.25 - x)

Here, we have

f(g(x)) = g(f(x))​

This means that

f(g(x)) = 3 - 2(-x² + x + 1)

g(f(x)) = -(3 - 2x)² + (3 - 2x) + 1

Using a graphing tool, we have

f(g(x)) = g(f(x))​ when x = 1

Hence, the value of x is 1

Read more about inverse function at

https://brainly.com/question/3831584

#SPJ1

Complete question

f(x) = 3 - 2x and g(x) = x - x² + 1 where x is an element of f have set of numbers

Find the inverse of G and the value for x for which f(g(x)) = g(f(x))​.

Answer:

$63 more in tax

Step-by-step explanation:

Takis is 5.25 in tax  

PlayStation is 68.25

well, we know the tax is 10.5% so let's get them for both.

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{\textit{\LARGE a}\% of \textit{\LARGE b}}\\ \cline{1-1} \\ \left( \cfrac{\textit{\LARGE a}}{100} \right)\cdot \textit{\LARGE b} \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{10.5\% of 49.99}}{\left( \cfrac{10.5}{100} \right)49.99} ~~ \approx ~~ 5.25[/tex]

[tex]\stackrel{\textit{10.5\% of 649.99}}{\left( \cfrac{10.5}{100} \right)649.99} ~~ \approx ~~ 68.25\hspace{9em}\underset{ \textit{taxes' difference} }{\stackrel{ 68.25~~ - ~~5.25 }{\approx\text{\LARGE 63}}}[/tex]

Answer:

169 - 144p²

Step-by-step explanation:

(13 - 12p) × (13 + 12p)

each term in the second factor is multiplied by each term in the first factor

13(13 + 12p) - 12p(13 + 12p) ← distribute parenthesis

= 169 + 156p - 156p - 144p² ← collect like terms

= 169 - 144p²

The power dissipated by the heater is 1260 watts (W).

What is a polynomial?

A polynomial is a mathematical expression consisting of variables (also known as indeterminates) and coefficients, which are combined using only the operations of addition, subtraction, and multiplication.

Given:

Current (I) = 10.5 A

Potential Difference (V) = 120 V

Unknown:

Power (P) = ?

The formula to calculate the power is:

P = VI

Substituting the given values:

P = 120 V × 10.5 A

P = 1260 W

It's important to note that the number of significant digits should be based on the precision of the given values. In this case, both values have three significant digits, so the answer should also have three significant digits. Thus, the final answer should be:

P = 1260 W (rounded to three significant digits).

Therefore, the power dissipated by the heater is 1260 watts (W).

To learn more about polynomial from the given link:

https://brainly.com/question/11536910

#SPJ1

Cindy and tom, working together, can rake the yard in 8 hours. Working alone, Tom takes twice as long as Cindy, it takes Cindy to rake the yard 2 hours

To find the time it takes Cindy to rake the yard alone, let's use the following steps:Let x be the time taken by Cindy to rake the yard alone . Then the time taken by Tom to rake the yard alone will be 2xIt is given that Cindy and Tom can rake the yard in 8 hours when they work together.

Using the formula for working together, we get:[tex]\[\frac{1}{x} + \frac{1}{2x} = \frac{1}{8}\][/tex] Multiplying the equation by the least common multiple of the denominators, we get:[tex]\[16 + 8 = 2x\][/tex] Simplifying, we get:[tex]\[2x = 24\][/tex]Dividing both sides by 2, we get:[tex]\[x = 12\][/tex]Therefore, it takes Cindy 12 hours to rake the yard alone.

See more about calculating the working time at: https://brainly.com/question/20290932

#SPJ11

Answer:

f(x) = (5/6)x - (1/4)

f(-8) = (5/6)(-8) - (1/4)

f(-8) = (5/3)(-4) - (1/4)

f(-8) = (-20/3) - (1/4)

f(-8) = (-80-3)/12

f(-8) = -83/12

The percentiles for the standard normal distribution

a. 0.93

b. -0.88

c. 0.67

d. -0.65

e. -1.28

To determine the percentiles for the standard normal distribution, use the standard normal distribution table. Percentiles for standard normal distribution are given by the standard normal distribution table.

The standard normal distribution is a special type of normal distribution with a mean of 0 and a variance of 1.

Step 1: Write down the given percentiles as a decimal and round to two decimal places.

For example, for the 81st percentile, 0.81 will be used.

Step 2: Use the standard normal distribution table to find the corresponding z-score.

Step 3: Round off the obtained answer to two decimal places.

a) 81st percentile:

The area to the left of the z-score is 0.81.

The corresponding z-score is 0.93.

Hence, the 81st percentile for the standard normal distribution is 0.93.

b) 19th percentile:

The area to the left of the z-score is 0.19.

The corresponding z-score is -0.88.

Hence, the 19th percentile for the standard normal distribution is -0.88.

c) 76th percentile:

The area to the left of the z-score is 0.76.

The corresponding z-score is 0.67.

Hence, the 76th percentile for the standard normal distribution is 0.67.

d) 24th percentile:

The area to the left of the z-score is 0.24.

The corresponding z-score is -0.65.

Hence, the 24th percentile for the standard normal distribution is -0.65.

e) 10th percentile:

The area to the left of the z-score is 0.10.

The corresponding z-score is -1.28.

Hence, the 10th percentile for the standard normal distribution is -1.28.

To know more about the "standard normal distribution": https://brainly.com/question/27275125

#SPJ11