x ≤ − 4
Step-by-step explanation:
Answer:
x ≤ -4
Step-by-step explanation:
16x − 7 ≤ − 71
Add 7 to both sides.
16x ≤ -64
Divide both sides by 16.
x ≤ -4
how to write this in number form The difference of 9 and the square of a number
Answer:
9-x^2
Step-by-step explanation:
The difference of means subtracting. the first number is 9 and the second is x^2, so you get 9-x^2
The data represents the daily rainfall (in inches) for one month. Construct a frequency distribution beginning with a lower class limit of and use a class width of . Does the frequency distribution appear to be roughly a normal distribution?
Answer:
The frequency distribution does not appear to be normal.
Step-by-step explanation:
The data provided is as follows:
S = {0.38 , 0 , 0.22 , 0.06 , 0 , 0 , 0.21 , 0 , 0.53 , 0.18 , 0 , 0 , 0.02 , 0 , 0 , 0.24 , 0 , 0 , 0.01 , 0 , 0 , 1.28 , 0.24 , 0 , 0.19 , 0.53 , 0 , 0, 0.24 , 0}
It is provided that the first lower class limit should be 0.00 and the class width should be 0.20.
The frequency distribution table is as follows:
Class Interval Count
0.00 - 0.19 21
0.20 - 0.39 6
0.40 - 0.59 2
0.60 - 0.79 0
0.80 - 0.99 0
1.00 - 1 . 19 0
1.20 - 1. 39 1
The frequency distribution does not appear to be normal. This is because the frequencies does not start and end at almost equivalent points and the mid-distribution does not consist of the highest frequency.
Thus, the frequency distribution does not appear to be normal.
One number is twice another. The sum of their reciprocals is 3/2 . Find the numbers.
Answer:
The two numbers are 1 and 2.
Step-by-step explanation:
Let the two numbers be a and b.
One number is twice another, so let's let b=2a.
Their reciprocals are 3/2. Thus:
[tex]\frac{1}{a}+\frac{1}{b} =\frac{3}{2}[/tex]
Substitute and solve for a:
[tex]\frac{1}{a}+\frac{1}{2a} =\frac{3}{2}\\[/tex]
Combine the fractions by forming a common denominator by multiplying the left term by 2:
[tex]\frac{2}{2a} +\frac{1}{2a}=\frac{3}{2}[/tex]
Combine and cross-multiply:
[tex]3/2a=3/2\\6a=6\\a=1\\b=2(1)=2[/tex]
Thus, the two numbers are 1 and 2.
Solve x/10 = -7 A. x = 3 B. x = -0.7 C. x = -17 D. x = -70
Answer:
x = -70
Step-by-step explanation:
x/10 = -7
Multiply each side by 10
x/10*10 = -7*10
x = -70
Find a linear inequality with the following solution set. Each grid line represents one unit. (Give your answer in the form ax+by+c>0 or ax+by+c>=0 where a, b, and c are integers with no common factor greater than 1.) Help please!! I have to finish it by tonight!! Thank you!!
Answer:
Below
Step-by-step explanation:
First let's find the equation of the doted line.
Notice that the line is crossing these points:
● (0,1)
● (1,2)
The equation of the line has the following form:
● y = ax+c
C is the y-intercept wich is given by the output of 0.
Notice that the output of 0 is 1.
● y = ax+1
● a = rise / run = (2-1)/(1-0) = 1
So y = x + 1
■■■■■■■■■■■■■■■■■■■■■■■■■■
Notice that the line divide the plan into 2 areas.
● y > x+1 => x+1-y < 0
● y < x+1 => x+1 -y > 0
To khwo wich one that represent the shaded area take a point and replace x and y by its coordinates
● (-1,2)
● -1+1-2 = 0-2 = -2
It is a negative value so the inequality is
● y > x+1
Using fluorescent imaging techniques, researchers observed that the position of binding sites on HIV peptides is approximately Normally distributed with a mean of 2.45 microns and a standard deviation of 0.35 micron. What is the standardized score for a binding site position of 2.03 microns? (Enter your answer rounded to one decimal place.)
Answer:
The values is
Step-by-step explanation:
From the question we are told that
The population mean is [tex]\mu = 2.45[/tex]
The standard deviation is [tex]\sigma = 0.35 \ mi[/tex]
The random value is [tex]x = 2.03[/tex]
The standardized score for a binding site position of 2.03 microns is mathematically represented as
[tex]z-score = \frac{x - \mu}{ \sigma }[/tex]
=> [tex]z-score = \frac{2.03 - 2.45}{ 0.35}[/tex]
=> [tex]z-score = -1.2[/tex]
Rectangle $ABCD$ is the base of pyramid $PABCD$. If $AB = 8$, $BC = 4$, $\overline{PA}\perp \overline{AD}$, $\overline{PA}\perp \overline{AB}$, and $PB = 17$, then what is the volume of $PABCD$?
Answer:
181.33Step-by-step explanation:
Since the base of the pyramid PABCD is a rectangle, the shape in question is a rectangular based pyramid. Volume of a rectangular based pyramid is expressed as V = 1/3 * Base Area * Height of the pyramid.
Given a rectangle ABCD with AB = 8 and BC = 4, the area of the rectangle will be equivalent to the base area of the pyramid.
Base Area = Length * Breadth
Base Area = AB * BC
Base Area = 8*4 = 32
If [tex]\overline{PA}\perp \overline{AD}\ and \ \overline{PA}\perp \overline{AB}[/tex], and PB = 17, then the height of the pyramid is PB = 17.
Volume of the pyramid = 1/3 * 32 * 17
Volume of the pyramid = 1/3 * 544
Volume of the rectangular based pyramid = 181.33
What is the most precise name for quadrilateral ABCD with vertices A(–5,2), B(–3, 5),C(4, 5),and D(2, 2)?
Answer: ABCD is a parallelogram.
Step-by-step explanation:
First we plot these point on a graph as given in attachment.
From the attachment we can observe that AD || BC || x-axis .
also, AB ||CD, that will make ABCD a parallelogram , but to confirm we check the property of parallelogram "diagonals bisect each other" , i.e . "Mid point of both diagonals are equal".
Mid point of AC= [tex](\dfrac{-5+4}{2},\dfrac{2+5}{2})=(\dfrac{-1}{2},\dfrac{7}{2})[/tex]
Mid point of BD= [tex](\dfrac{-3+2}{2},\dfrac{5+2}{2})=(\dfrac{-1}{2},\dfrac{7}{2})[/tex]
Thus, Mid point of AC=Mid point of BD
i.e. diagonals bisect each other.
That means ABCD is a parallelogram.
Answer: ABCD is a parallelogram.
Step-by-step explanation:
First, we plot these points on a graph as given in the attachment. From the attachment, we can observe that AD || BC || x-axis. Also, AB ||CD, which will make ABCD a parallelogram, but to confirm, we check the parallelogram property "diagonals bisect each other," i.e., "Midpoint of both diagonals is equal."
The midpoint of AC=. The midpoint of BD=. Thus, the Midpoint of AC=Mid point of BD diagonals bisects each other. That means ABCD is a parallelogram.
As part of a group exercise, four students each randomly selected 3 cards with angle measures written on them. The table shows the results. Which student selected angle measures that could form a triangle? A. Aella B. Aisha C. Ah Lam D.Andrew
Answer = A. Aella
Step-by-step explanation: Add 60, 25, and 95 degrees because that will equal 180 which is what the triangle equals.
6x - 10 = 4(x + 3) x = ? x = 9 x = 10 x = 11 x = 12
Answer:
x=11
Step-by-step explanation:
Answer:
x = 11
Step-by-step explanation:
6x - 10 = 4(x+3)
6x - 10 = 4*x + 4*3
6x - 10 = 4x + 12
6x - 4x = 12 + 10
2x = 22
x = 22/2
x = 11
check:
6*11 - 10 = 4(11+3)
66 - 10 = 4*14 = 56
A small company is creating a new product to sell to buyers. They have estimated that it will cost them $25 to produce each item and they will have start-up costs of $116000. This leads to the following expression, which gives the total cost, in dollars, to produce q of these new products: 25q+116000 Use this expression to predict how much it will cost them to produce 8900 items.
Answer:
[tex]Cost = 338500[/tex]
Step-by-step explanation:
Given
Startup = $116000
Cost per item = $25
Equation: 25q + 116000
Required
Determine the cost of producing 8900 items
The question implies that q = 8900
To solve further, we have to substitute 8900 for q in the given equation
Equation = 25q + 116000 becomes
[tex]Cost = 25 * 8900 + 116000[/tex]
[tex]Cost = 222500 + 116000[/tex]
[tex]Cost = 338500[/tex]
Hence, the cost of producing 8900 items is $338500
Describe the transformation from triangle DEF to triangle D′E′F′ in the figure. Question 17 options:
A) Transformation down 8 units and right 6 units
B) Rotation 90° counterclockwise about the origin
C) Reflection about the origin
D) Rotation 90° clockwise about the origin
Answer:
C) Reflection about the origin
Step-by-step explanation:
DE points to the right and slightly down. D'E' points to the left and slightly up. The segments are parallel, not perpendicular, so represent a rotation of 180°, not 90°. If the figure were subject only to translation, these segments would point in the same direction.
The transformation is a reflection about the origin (C). (This is equivalent to a rotation of 180°.)
Compute the flux H F of F(x,y) = hxy, x − yi across the boundary of the square given by −1 ≤ x ≤ 1, −1 ≤ y ≤ 1.
Answer:
4i.
Step-by-step explanation:
To find the flux through the square, we use the divergence theorem for the flux. So Flux of F(x,y) = ∫∫divF(x,y).dA
F(x,y) = hxy,x - yi
div(F(x,y)) = dF(x,y)/dx + dF(x,y)dy = dhxy/dx + d(x - yi)/dy = hy - i
So, ∫∫divF(x,y).dA = ∫∫(hy - i).dA
= ∫∫(hy - i).dxdy
= ∫∫hydxdy - ∫∫idxdy
Since we are integrating along the boundary of the square given by −1 ≤ x ≤ 1, −1 ≤ y ≤ 1, then
∫∫divF(x,y).dA = ∫₋₁¹∫₋₁¹hydxdy - ∫₋₁¹∫₋₁¹idxdy
= h∫₋₁¹{y²/2}¹₋₁dx - i∫₋₁¹[y]₋₁¹dx
= h∫₋₁¹{1²/2 - (-1)/2²}dx - i∫₋₁¹[1 - (-1)]dx
= h∫₋₁¹{1/2 - 1)/2}dx - i∫₋₁¹[1 + 1)]dx
= 0 - i∫₋₁¹2dx
= - 2i[x]₋₁¹
= 2i[1 - (-1)]
= 2i[1 + 1]
= 2i(2)
= 4i
Within what values will 95.44 percent of sample means of this process fall, if samples of n = 8 are taken and the process is in control (random)?
This question is incomplete, here is the complete question:
Specifications for a part for a DVD player state that the part should weigh between 25.2 and 26.2 ounces. The process that produces the parts has a mean of 25.7 ounces and a standard deviation of .25 ounce. The distribution of output is normal. Use Table-A
a) What percentage of parts will not meet the weight specs? (Round your "z" value and final answer to 2 decimal places.
b) Within what values will 95.44 percent of sample means of this process fall, if samples of n = 8 are taken and the process is in control (random)
Answer:
a) What percentage of parts will not meet the weight specs = 4.56%
b) values within which 95.44 percent of sample means of this process falls are;
UCL = 25.88 ounces
LCL = 25.52 ounces
Step-by-step explanation:
Given that;
Mean u = 25.7 ounces
Std deviation = 0.25 ounces
a)
Z-score (Upper) = (X- u) / s = (26.2 - 25.7) / 0.25 = 2
Z-score (Lower) = ( 25.2-25.7 ) / 0.25 = -2
using the T - table
For Z = 2.0
the area in the tail of the curve to the right of the mean (upper) = 0.4772
therefore;
Number of defective = 0.5000 - 0.4772 = 0.0228
These are errors on one side of normal distribution.
To get the total error, we say
Total error = 2 × 0.0228
Total error = 0.0456 ≈ 4.56% ( 2 decimal place )
b)
given that;
n = 8,
standard deviation = 0.25 ounce
Standard deviation of X = Std deviation / √n
= 0.25 /√8 = 0.088
Now for 95.44% of confidence interval, Z = 2
UCL = Mean + Z × Standard deviation of X
= 25.7 + 2 × 0.088
= 25.88 ounces
LCL = Mean - Z × Standard deviation of X
= 25.7 - 2 × 0.088
= 25.52 ounces
According to the United States Golf Association, the diameter of a golf ball should not be less than 42.67 millimeters. What is the estimate of this value rounded to the nearest tenth of a millimeter?
Answer:
42.7 mm
Step-by-step explanation:
To the nearest tenth of a mm, 42.67 mm would be 42.7 mm.
After estimate of this value rounded to the nearest tenth of a millimeter,
⇒ 42.67 ≈ 42.7
We have to given that,
According to the United States Golf Association, the diameter of a golf ball should not be less than 42.67 millimeters.
Hence, After estimate of this value rounded to the nearest tenth of a millimeter, we get;
⇒ 42.67
As, 7 is grater than 5, so we can add 1 to the tenth place.
⇒ 42.67 ≈ 42.7
Therefore, After estimate of this value rounded to the nearest tenth of a millimeter,
⇒ 42.67 ≈ 42.7
Learn more about the rounding number visit:
brainly.com/question/27207159
#SPJ2
An ‘in shuffle’ is a perfect shuffle on a standard deck of 52 playing cards that splits the deck in half, then interleaves cards starting with the top half.
Required:
a. What is the position of the first card after the 7th shuffle?
b. How many times must one perform the shuffle so that the top card becomes the bottom card?
c. When do the first and last cards in the deck touch?
Answer:
a) position 22
b) 26
c) shuffle 25
Step-by-step explanation:
Assuming the shuffling occurs so that the bottom card of the top half of the deck (card 26) becomes the bottom card (card 52), while the top card of the bottom half (card 27) becomes the top card (card 1), the sequence of card 1 positions with successive shuffles is ...
{2, 4, 8, 16, 32, 11, 22, 44, 35, 17, 34, 15, 30, 7, 14, 28, 3, 6, 12, 24, 48, 43, 33, 13, 26, 52, 51, 49, 45, 37, 21, 42, 31, 9, 18, 36, 19, 38, 23, 46, 39, 25, 50, 47, 41, 29, 5, 10, 20, 40, 27, 1}
That is, after the first shuffle, card 1 is at position 2; after the second shuffle, it is at position 4; and so on.
(a) Hence the position of card 1 after the 7th shuffle is 22.
__
(b) The top card is in position 52 after 26 shuffles.
__
(c) The top card is in position 26 after 25 shuffles; the bottom card is in position 27 after 25 shuffles. That is when they first touch. (They touch again after 51 shuffles.)
The population of Jacksonville is 836,507. What is the population rounded to the
nearest hundred thousand?
A. 900,000
O
B. 850,000
C. 840,000
o D. 800,000
Answer:
D. 800,000
Step-by-step explanation:
It is D because you find the hundred thousand place which is the 8, the you go to the number next door which is 3, if the 3 is 5 or greater the 8 will become a 9 or if it is not then it will stay the same. And everything to the left stays the same, everything to the right turns into zeros.
If X = 12 units, Y = 4 units, and h = 10 units, then what is the area of the trapezoid shown above?
Answer:
52 units^2
Step-by-step explanation:
It's unclear what the leg lengths and the width are. I must assume that the lengths are 12 units and 14 units and that the width of the trapezoid is 4 units. You were given an illustration for this problem and should have shared it or described the trapezoid in words. Please do this if the answer given below does not agree with any of your answer choices.
If the lengths are 12 units and 14 units and that the width of the trapezoid is 4 units, then the area is
12 units + 14 units
A = ---------------------------- * 4 units = 52 units^2
2
Find the constant of proportionality (in gallons per minute) for the second and third rows of the table. Show your work.
Answer:
16.50 gallons per minute
Step-by-step explanation:
Because this is a proportional function, we can set up the equation y = kx, where k is the constant of proportionality. By plugging in one point (and this point can be any point provided by the table), we can use the equality k = y/x to find the proportionality constant. If we plug in the information at 1 minute, we get 16.50/1 = 16.5
The constant of proportionality is same for all the rows that is 16.50 gallons per minute.
How can we calculate the Constant of proportionality?WE can calculate the Constant of proportionality as;
Constant of proportionality = no of gallons of water per 1 minute.
we have 16.50 gallons of water per 1 minute and 24.75 gallons of water in 1.5 minutes.
In 1 minute, we will have,
24.75 ÷ 1.5 = 16.50 gallons
Similarly,
33 gallons in 2 minutes. In 1 minute, we will have,
33 ÷ 2 = 16.50 gallons.
We can see that there seems to be the same constant of proportionality for the 2nd and 3rd row, that is 16.50.
Thus, a relationship between gallons of water (w) and time (t), considering the constant, 16.50, can be written as:
w = 16.50t
Hence, the constant of proportionality, 16.50, is same for all rows.
Learn more about directly inversely proportional relationship variable here:
https://brainly.com/question/13082482
#SPJ2
plsss i need help pls is urgent it is trigonometric ratio to find the length side in right angle plsss i will mark u as brainliest
Answer:
which side are you looking for, SOHCAHTOA
OPPOSITE
tan50.34=x÷180
x=180×1.2062(tan50.34)
x=2117.116
PLEASE HELP! (3/4) - 50 POINTS -
Answer:
C
Step-by-step explanation:
The set of data will only become more narrow when the standard deviation is decreased, so D isn't correct. The data isn't going to shift directions unless there's a translation, so A and B are both out. That leaves us with C. The opposite of answer D.
Answer:
C. It produces a wider range of probable values
Step-by-step explanation:
The set of data that we have cannot shift in directions unless there is a translation, so therefore, A and B are both out. The set of data would become smaller when the standard deviation is decreases so therefore, D isn't correct. So, that leaves us with only one answer.
C. It produces a wider range of probably values.
Please answer my question
Step-by-step explanation:
The inequality shows by line is
i) 1<=x<=6
OR,
x is an positive integer.
Express the function F in the form f∘g. (Enter your answers as a comma-separated list. Use non-identity functions for f(x) and g(x).)
F(x) = (x − 1)4
Answer:
[tex]f(x) = x^{4}[/tex], [tex]g(x) = x-1[/tex]
Step-by-step explanation:
Let be [tex]F(x) = f\circ g (x) = (x-1)^{4}[/tex], then expression for [tex]f(x)[/tex] and [tex]g(x)[/tex] are, respectively:
[tex]f(x) = x^{4}[/tex] and [tex]g(x) = x-1[/tex]
An angle is 100° angle. how many degrees will you add it to make it a linear pair ?
Answer:
80
Step-by-step explanation:
linear pair = 180
Now,
100 + 80 = 180
2^x [(x+1)^3 -1] =2^x - (x+1)^3 + 1
Evaluate the expression of both of the whole number X values. One will be negative and the other positive. Identify the negative value as a lower bound and a positive value as a upper bound.
Answer:
Step-by-step explanation:
Given
2^x [(x+1)³ -1] = 2^x - (x+1)³ + 1
Lep p = 2^x, and q = (x+1)³ - 1
Then the original equation becomes
pq = p - q
p - q - pq = 0
p(1 - q) - q = 0
p = q/(1 - q)
2^x = [(x+1)³ - 1]/[-(x+1)³]
2^x = [1 - (x+1)³]/[(x+1)³]
2^x = (x+1)^(-3) - 1
Find the length of FT¯¯¯¯¯¯¯ A. 77.71 B. 72.47 C. 56.84 D. 49.42
Answer:
D, 49.42
Step-by-step explanation:
ΔVFT=180-90-43=47
formula
a/sin A = b/sin B/ = c/sin C
So,
FV/sin90=53/sin47
FV=72.4684
FT=√(72.4684)^2-(53)^2
FT=49.4234
Ans:D
The length FT in the given right-angle triangle is 49.42.
So option D is the correct answer.
We are given a right-angle triangle and to find the length of any side we can use Pythagoras theorem or trigonometric identities.
In the triangle, we see that TV = 53 and ∠ FVT = 43°
We will find the length FT by using Pythagoras theorem or trigonometric identities.
What are trigonometric functions?
There are some commonly used trigonometric identities:
SinФ = Perpendicular / hypotenuse
Cos Ф = Base / hypotenuse
Tan Ф = Perpendicular / Base
We will use Tan Ф = Perpendicular / Base to find the length FT.
Because we need to use trigonometric identities that have TV and FT.
Tan Ф = FT / TV
Tan 43° = FT / 53
FT = Tan 43° x 53
FT = 0.932515 X 53
FT = 49.42
Thus we got FT = 49.42 using the tan function.
Learn more about trigonometric functions here:
https://brainly.com/question/14746686
$SPJ2
Which option is correct and how would one solve for it?
Answer:
102
Step-by-step explanation:
We have the sum for k = 1 to 4 of 3 ^ ( k-1) * ( k-1)
k =1 3 ^ (1-1) * ( 1-1) = 3^0 * 0 = 0
k =2 3 ^ (2-1) * ( 2-1) = 3^1 * 1 = 3
k =3 3 ^ (3-1) * ( 3-1) = 3^2 * 2 = 9*2 = 18
k =4 3 ^ (4-1) * ( 4-1) = 3^3 * 3 = 27 *3 = 81
Add these together
0+3+18+81 =102
━━━━━━━☆☆━━━━━━━
▹ Answer
102
▹ Step-by-Step Explanation
Convert the notation into a sum and substitute values from 1-4:
(3¹⁻¹ *(1 - 1)) + (3²⁻¹ * (2 - 1)) + (3³⁻¹ * (3 - 1)) + (3⁴⁻¹ * (4 - 1))
0 + 3 + 18 + 81
= 102
Hope this helps!
CloutAnswers ❁
━━━━━━━☆☆━━━━━━━
1. How tall, in feet, would you be if you were 1,000,000 inches tall?
Answer:
500
Step-by-step explanation:
Find the next term of the sequence.
16, 9, 2, -5,
Answer: The next term is -12.
Step-by-step explanation:
16,9,2,-5
Looking at these numbers to go from 16 to 9 you will add -7 or subtract 7 . The same way you subtract 7 from 9 to get 2 and subtract 7 from 2 to get -5.
So to determine the next term subtract 7 from -7 or add -7.
-5 - 7 = -12
0r -5 + -7 = -12
[tex] 👋 [/tex] Hello ! ☺️
Step-by-step explanation:
•Find the next term of the sequence.
Let us find the interval between two successive terms:
16 - 9= 7
-7 is therefore the common différence of this sequence. (d)
Find the next term :
-5 + (-7)= -12
[tex]\boxed{\color{gold}{N = -12}} [/tex]
[tex]<marquee direction="left" scrollamount="2" height="100" width="150">💘Mynea04</marquee>[/tex]
What is the equation of the following line? Be sure to scroll down first to see all answer options.
A.
y = 3x
B.
y = -3x
C.
y = 2x
D.
y = 6x
E.
y = 1/3x
F.
y = - 1/3x
Answer:
y=1/3x
Step-by-step explanation:
change in y/ change in x
2-0/6-0= 2/6=1/3
since its a positive slope, it’s 1/3
Answer:
E. [tex]y=\frac{1}{3}x[/tex]
Step-by-step explanation:
Take the two points shown:
[tex](0,0)(6,2)[/tex]
Use these to make an equation in slope-intercept form:
[tex]y=mx+b[/tex]
m is the slope and b is the y-intercept (where x is equal to 0).
Use the slope formula:
[tex]\frac{y_{2}-y_{1}}{x_{2}-x_{1}} =\frac{rise}{run}[/tex]
Rise over run is the change in the y-axis over the change in the x-axis, otherwise known as the slope. Insert coordinate points:
[tex](0_{x1},0_{y1})\\\\(6_{x2},2_{y2})\\\\\frac{2-0}{6-0}[/tex]
Simplify:
[tex]\frac{2-0}{6-0} =\frac{2}{6} =\frac{1}{3}[/tex]
The slope is [tex]\frac{1}{3}[/tex]. Insert this into the equation:
[tex]y=\frac{1}{3}x+b[/tex]
Now find the y-intercept. Take one of the coordinate points and insert:
[tex](6_{x},2_{y})\\\\2=\frac{1}{3}(6)+b[/tex]
Solve for b. Simplify multiplication:
[tex]\frac{1}{3}*\frac{6}{1}=\frac{6}{3}=2\\\\ 2=2+b[/tex]
Use reverse operations to isolate the variable:
[tex]2-2=2-2+b\\\\0=b[/tex]
The y-intercept is equal to 0. Insert this into the equation:
[tex]y=\frac{1}{3}x+0[/tex]
or
[tex]y=\frac{1}{3}x[/tex]
:Done
