for [infinity] 13 n10 n = 1 , since f(x) = 13 x10 is continuous, positive, and decreasing on [1, [infinity]), we consider the following. (if the quantity diverges, enter diverges.)

Answers

Answer 1

Given a series [infinity] 13n10n=1. Since f(x) = 13x10 is continuous, positive and decreasing on [1, [infinity]), we have to determine whether the series converges or diverges.

We know that for a decreasing series an, the integral test states that if the integral ∫f(x)dx from 1 to [infinity] converges, then the series also converges. Let's consider the integral ∫f(x)dx from 1 to [infinity]. ∫f(x)dx = ∫13x10dx from 1 to [infinity] ,
= [13/110] [x11] from 1 to [infinity] = [13/110] lim x-> [infinity] x11 - [13/110] (1) = [13/110] [infinity] - [13/110]
Therefore, ∫f(x)dx diverges since the limit does not exist and the integral has an infinite value.

Hence, by the integral test, we can conclude that the series [infinity] 13n10n=1 diverges. Hence, the answer is, The given series [infinity] 13n10n=1 diverges.

To Know about integral visit:

brainly.com/question/31059545

#SPJ11


Related Questions

Solve for measure of angle A.

Answers

Angle a= 1/2(140-96)
1/2(44)
22

The measure of angle a is:

a = (140° - 96°) / 2 = 44° / 2 = 22°

Therefore, the answer is 22.

1

If two secant lines intersect outside a circle, the measure of the angle formed by the two lines is one half the positive difference of the measures of the intercepted arcs.

In the given diagram, we can see that the intercepted arcs are 96° and 140°. Therefore, the measure of angle a is:

a = (140° - 96°) / 2 = 44° / 2 = 22°

Therefore, the answer is 22.

Answer: 22

To know more about vectors

https://brainly.com/question/28028700

#SPJ3

In the cofinite topology on the infinite set X
, any two non-empty open sets have a non-empty intersection. This should be reasonably clear: if U
and V
are non-empty and open and U∩V
is empty, then
X=X−(U∩V)=(X−U)∪(X−V).
But now the infinite set X
is a union of two finite sets, a contradiction.
Now, in a metric space, do ALL pairs of non-empty open sets always have non-empty intersection?

Answers

The answer to the question is false, not all pairs of non-empty open sets always have a non-empty intersection in a metric space.

In general, we cannot guarantee that every pair of non-empty open sets in a metric space has a non-empty intersection. Consider, for example, the real line R equipped with the Euclidean metric. The intervals (-1, 0) and (0, 1) are both open and non-empty, but they have an empty intersection. In the standard topology on the real line, we can find many pairs of non-empty open sets that have an empty intersection.

A matrix is a set of numbers arranged in rows and columns. learns about the elements and dimensions of matrices and introduces them for the first time. A rectangular grid of numbers in rows and columns is known as a matrix. Matrix A, as an illustration, has two rows and three columns. Its single row and 1 n row matrix order are the reasons behind its name. A = [1 2 4 5] is a row matrix of order 1 by 4, for instance. P = [-4 -21 -17] of order 1-by-cubic is another illustration of a row matrix.

To know more about matrix visit:

https://brainly.com/question/29995229

#SPJ11

Consider a uniform discrete distribution on the interval 1 to 10. What is P(X= 5)? O 0.4 O 0.1 O 0.5

Answers

For a uniform discrete distribution on the interval 1 to 10, P(X= 5) is :

0.1.

Given a uniform discrete distribution on the interval 1 to 10.

The probability of getting any particular value is 1/total number of outcomes as the distribution is uniform.

There are 10 possible outcomes. Hence the probability of getting a particular number is 1/10.

Therefore, we can write :

P(X = x) = 1/10 for x = 1,2,3,4,5,6,7,8,9,10.

Now, P(X = 5) = 1/10

P(X = 5) = 0.1.

Hence, the probability that X equals 5 is 0.1.

Therefore, the correct option is O 0.1.

To learn more about probability visit : https://brainly.com/question/13604758

#SPJ11

For the following function, find the slope of the graph and the y-intercept. Then sketch the graph. y=4x+3 The slope is

Answers

Given function is y = 4x + 3The slope of the graph is given by the coefficient of x i.e. 4.So, the slope of the given graph is 4.To find the y-intercept, we need to put x = 0 in the given equation. y = 4x + 3  y = 4(0) + 3  y = 3Therefore, the y-intercept of the graph is 3.Sketching the graph:We know that the y-intercept is 3,

Therefore the point (0,3) lies on the graph. Similarly, we can find other points on the graph by taking different values of x and finding the corresponding value of y. We can also use the slope to find other points on the graph. Here is the graph of the function y = 4x + 3:Answer: The slope of the graph is 4 and the y-intercept is 3.

To know more about coefficient visit :-

https://brainly.com/question/1594145

#SPJ114

Situation: a 40 gram sample of a substance that’s used for drug research has a k-value of 0.1472. N=N0e(-kt)
Find the substance’s half-life, in days. Round your answer to the nearest tenth

Answers

Rounding to the nearest tenth, the substance's half-life is approximately 4.7 days.

To find the substance's half-life, we can use the formula N = N0 * e^(-kt), where:

N is the final amount of the substance,

N0 is the initial amount of the substance,

k is the decay constant,

t is the time in days.

In this case, the half-life represents the time it takes for the substance to decay to half of its initial amount. So, we have N = N0/2.

Substituting these values into the formula, we get:

N0/2 = N0 * e^(-k * t)

Dividing both sides by N0 and simplifying, we have:

1/2 = e^(-k * t)

To isolate t, we can take the natural logarithm (ln) of both sides:

ln(1/2) = -k * t

Since ln(1/2) is the natural logarithm of 1/2 (approximately -0.6931), we can rewrite the equation as:

-0.6931 = -k * t

Dividing both sides by -k, we find:

t = -0.6931 / k

Substituting k = 0.1472 (given), we have:

t = -0.6931 / 0.1472 ≈ -4.7121

Since time cannot be negative, we take the absolute value:

t ≈ 4.7121

Rounding to the nearest tenth, the substance's half-life is approximately 4.7 days.

For more questions on Rounding

https://brainly.com/question/28128444

#SPJ8

Plot each point on the coordinate plane. (8, 7) (2, 9) (5, 8)

Answers

To plot each point on the coordinate plane (8, 7), (2, 9) and (5, 8), we need to follow the following steps:

Step 1: Firstly, we need to understand that the coordinate plane is made up of two lines that intersect at right angles, called axes. The horizontal line is the x-axis, and the vertical line is the y-axis.

Step 2: Next, locate the origin (0,0), where the x-axis and y-axis intersect. This point represents (0, 0), and all other points on the plane are located relative to this point.

Step 3: After locating the origin, plot each point on the coordinate plane. To plot a point, we need to move from the origin (0,0) a certain number of units to the right (x-axis) or left (x-axis) and then up (y-axis) or down (y-axis). (8,7) The x-coordinate of the first point is 8, and the y-coordinate is 7. So, from the origin, we move eight units to the right and seven units up and put a dot at that location. (2,9)

The x-coordinate of the second point is 2, and the y-coordinate is 9. So, from the origin, we move two units to the right and nine units up and put a dot at that location. (5,8) The x-coordinate of the third point is 5, and the y-coordinate is 8. So, from the origin, we move five units to the right and eight units up and put a dot at that location.

To know more about coordinate visit:

https://brainly.com/question/32836021

#SPJ11

Solve the equation for solutions over the interval [0°, 360°). csc ²0+2 cot0=0 ... Select the correct choice below and, if necessary, fill in the answer box to complete your ch OA. The solution set

Answers

The solution set over the interval [0°, 360°) is {120°, 240°}. The correct choice is (c) {120°, 240°}.

The given equation is csc²θ + 2 cotθ = 0 over the interval [0°, 360°).

To solve this equation, we first need to simplify it using trigonometric identities as follows:

csc²θ + 2 cotθ

= 0(1/sin²θ) + 2(cosθ/sinθ)

= 0(1 + 2cosθ)/sin²θ = 0

We can then multiply both sides by sin²θ to get:

1 + 2cosθ = 0

Now, we can solve for cosθ as follows:

2cosθ = -1cosθ

= -1/2

We know that cosθ = 1/2 at θ = 60° and θ = 300° in the interval [0°, 360°).

However, we have cosθ = -1/2, which is negative and corresponds to angles in the second and third quadrants. To find the solutions in the interval [0°, 360°), we can use the following formula: θ = 180° ± αwhere α is the reference angle. In this case, the reference angle is 60°.

So, the solutions are:θ = 180° + 60° = 240°θ = 180° - 60° = 120°

Therefore, the solution set over the interval [0°, 360°) is {120°, 240°}. The correct choice is (c) {120°, 240°}.

To know more about solution visit

https://brainly.com/question/32845329

#SPJ11

factor the expression and use the fundamental identities to simplify. there is more than one correct form of the answer. 6 tan2 x − 6 tan2 x sin2 x

Answers

We will substitute this value of sin²x in our expression which will give;6 tan²x(1 - sin²x)6 tan²x(1 - (1 - cos²x))6 tan²x cos²x.

We need to simplify the given expression which is given below;

6 tan2 x − 6 tan2 x sin2 x

In order to solve this expression, we will first write it in a factored form which will be;

6 tan²x(1 - sin²x)

We know that the identity for sin²x is;sin²x + cos²x = 1

Which can be rearranged to give;

sin²x = 1 - cos²x

Now we will substitute this value of sin²x in our expression which will give;6 tan²x(1 - sin²x)6 tan²x(1 - (1 - cos²x))6 tan²x cos²x.

Know more about the expression here:

https://brainly.com/question/723406

#SPJ11

Choose the equation you would use to find the altitude of the airplane. o tan70=(x)/(800) o tan70=(800)/(x) o sin70=(x)/(800)

Answers

The equation that can be used to find the altitude of an airplane is sin70=(x)/(800). The altitude of an airplane can be found using the equation sin70=(x)/(800). In order to find the altitude of an airplane, we must first understand what the sin function represents in trigonometry.

In trigonometry, sin function represents the ratio of the length of the side opposite to the angle to the length of the hypotenuse. When we apply this definition to the given situation, we see that the altitude of the airplane can be represented by the opposite side of a right-angled triangle whose hypotenuse is 800 units long. This is because the altitude of an airplane is perpendicular to the ground, which makes it the opposite side of the right triangle. Using this information, we can substitute the values in the formula to find the altitude.

To know more about equation visit:

brainly.com/question/29657983

#SPJ11

dentify the critical z-value(s) and the Rejection/Non-rejection intervals that correspond to the following three z-tests for proportion value. Describe the intervals using interval notation. a) One-tailed Left test; 2% level of significance One-tailed Right test, 5% level of significance Two-tailed test, 1% level of significance d) Now, suppose that the Test Statistic value was z = -2.25 for all three of the tests mentioned above. For which of these tests (if any) would you be able to Reject the null hypothesis?

Answers

The critical z-value for the One-tailed Left test at 2% level of significance is -2.05. Since -2.25 < -2.05, the null hypothesis can be rejected.

a) One-tailed Left test; 2% level of significanceCritical z-value for 2% level of significance at the left tail is -2.05.

The rejection interval is z < -2.05.

Non-rejection interval is z > -2.05.

Using interval notation, the rejection interval is (-∞, -2.05).

The non-rejection interval is (-2.05, ∞).b) One-tailed Right test, 5% level of significanceCritical z-value for 5% level of significance at the right tail is 1.645.

The rejection interval is z > 1.645.

Non-rejection interval is z < 1.645. Using interval notation, the rejection interval is (1.645, ∞).

The non-rejection interval is (-∞, 1.645).

c) Two-tailed test, 1% level of significanceCritical z-value for 1% level of significance at both tails is -2.576 and 2.576.

The rejection interval is z < -2.576 and z > 2.576.

Non-rejection interval is -2.576 < z < 2.576.

Using interval notation, the rejection interval is (-∞, -2.576) ∪ (2.576, ∞).

The non-rejection interval is (-2.576, 2.576).

d) Now, suppose that the Test Statistic value was z = -2.25 for all three of the tests mentioned above. For which of these tests (if any) would you be able to Reject the null hypothesis?

If the Test Statistic value was z = -2.25, then the null hypothesis can be rejected for the One-tailed Left test at a 2% level of significance.

The critical z-value for the One-tailed Left test at 2% level of significance is -2.05. Since -2.25 < -2.05, the null hypothesis can be rejected.

Know more about critical z-value here:

https://brainly.com/question/14040224

#SPJ11

In a survey funded by Glaxo Smith Kline (GSK), a SRS of 1032 American adults was
asked whether they believed they could contract a sexually transmitted disease (STD).
76% of the respondents said they were not likely to contract a STD. Construct and
interpret a 96% confidence interval estimate for the proportion of American adults who
do not believe they can contract an STD.

Answers

We are 96% Confident that the true proportion of American adults who do not believe they can contract an STD falls between 0.735 and 0.785.  

To construct a confidence interval for the proportion of American adults who do not believe they can contract an STD, we can use the following formula:

Confidence Interval = Sample Proportion ± Margin of Error

The sample proportion, denoted by p-hat, is the proportion of respondents who said they were not likely to contract an STD. In this case, p-hat = 0.76.

The margin of error is a measure of uncertainty and is calculated using the formula:

Margin of Error = Critical Value × Standard Error

The critical value corresponds to the desired confidence level. Since we want a 96% confidence interval, we need to find the critical value associated with a 2% significance level (100% - 96% = 2%). Using a standard normal distribution, the critical value is approximately 2.05.

The standard error is a measure of the variability of the sample proportion and is calculated using the formula:

Standard Error = sqrt((p-hat * (1 - p-hat)) / n)

where n is the sample size. In this case, n = 1032.

the margin of error and construct the confidence interval:

Standard Error = sqrt((0.76 * (1 - 0.76)) / 1032) ≈ 0.012

Margin of Error = 2.05 * 0.012 ≈ 0.025

Confidence Interval = 0.76 ± 0.025 = (0.735, 0.785)

We are 96% confident that the true proportion of American adults who do not believe they can contract an STD falls between 0.735 and 0.785.  the majority of American adults (76%) do not believe they are likely to contract an STD, with a small margin of error.

For more questions on Confident .

https://brainly.com/question/20309162

#SPJ8

the domain of the relation l is the set of all real numbers. for x, y ∈ r, xly if x < y.

Answers

The given relation l can be described as follows; xly if x < y. The domain of the relation l is the set of all real numbers.

Let us suppose two real numbers 2 and 4 and compare them. If we apply the relation l between 2 and 4 then we get 2 < 4 because 2 is less than 4. Thus 2 l 4. For another example, let's take two real numbers -5 and 0. If we apply the relation l between -5 and 0 then we get -5 < 0 because -5 is less than 0. Thus, -5 l 0.It can be inferred from the examples above that all the ordered pairs which will satisfy the relation l can be written as (x, y) where x.

To know more about the domain visit:

https://brainly.com/question/12264811

#SPJ11

can
you sum up independent and mutuallay exclusive events.
1. In a self-recorded 60-second video explain Independent and Mutually Exclusive Events. Use the exact example used in the video, Independent and Mutually Exclusive Events.

Answers

The biggest difference between the two types of events is that mutually exclusive basically means that if one event happens, then the other events cannot happen.

At first the definitions of mutually exclusive events and independent events may sound similar to you. The biggest difference between the two types of events is that mutually exclusive basically means that if one event happens, then the other events cannot happen.

P(A and B) = 0 represents mutually exclusive events, while P (A and B) = P(A) P(A)

Examples on Mutually Exclusive Events and Independent events.

=> When tossing a coin, the event of getting head and tail are mutually exclusive

=> Outcomes of rolling a die two times are independent events. The number we get on the first roll on the die has no effect on the number we’ll get when we roll the die one more time.

Learn more about Independent event at:

https://brainly.com/question/32716243

#SPJ4

Answer the following questions using the information provided below and the decision tree.

P(s1)=0.56P(s1)=0.56       P(F∣s1)=0.66P(F∣s1)=0.66       P(U∣s2)=0.68P(U∣s2)=0.68



a) What is the expected value of the optimal decision without sample information?
$

For the following questions, do not round P(F) and P(U). However, use posterior probabilities rounded to 3 decimal places in your calculations.

b) If sample information is favourable (F), what is the expected value of the optimal decision?

$

c) If sample information is unfavourable (U), what is the expected value of the optimal decision?
$

Answers

The expected value of the optimal decision without sample information is 78.4, if sample information is favourable (F), the expected value of the optimal decision is 86.24, and if sample information is unfavourable (U), the expected value of the optimal decision is 75.52.

Given information: P(s1) = 0.56P(s1) = 0.56P(F|s1) = 0.66P(F|s1) = 0.66P(U|s2) = 0.68P(U|s2) = 0.68

a) To find the expected value of the optimal decision without sample information, consider the following decision tree: Thus, the expected value of the optimal decision without sample information is: E = 100*0.44 + 70*0.56 = 78.4

b) If sample information is favorable (F), the new decision tree would be as follows: Thus, the expected value of the optimal decision if the sample information is favourable is: E = 100*0.44*0.34 + 140*0.44*0.66 + 70*0.56*0.34 + 40*0.56*0.66 = 86.24

c) If sample information is unfavourable (U), the new decision tree would be as follows: Thus, the expected value of the optimal decision if the sample information is unfavourable is: E = 100*0.44*0.32 + 70*0.44*0.68 + 140*0.56*0.32 + 40*0.56*0.68 = 75.52

To know more about expected value visit:

https://brainly.com/question/13749480

#SPJ11

Suppose a certain trial has a 60% passing rate. We randomly sample 200 people that took the trial. What is the approximate probability that at least 65% of 200 randomly sampled people will pass the trial?

Answers

The approximate probability that at least 65% of the 200 randomly sampled people will pass the trial is approximately 0.9251 or 92.51%

What is the approximate probability that at least 65% of 200 randomly sampled people will pass the trial?

To calculate the approximate probability that at least 65% of the 200 randomly sampled people will pass the trial, we can use the binomial distribution and the cumulative distribution function (CDF).

In this case, the probability of success (passing the trial) is p = 0.6, and the sample size is n = 200.

We want to calculate P(X ≥ 0.65n), where X follows a binomial distribution with parameters n and p.

To approximate this probability, we can use a normal distribution approximation to the binomial distribution when both np and n(1-p) are greater than 5. In this case, np = 200 * 0.6 = 120 and n(1-p) = 200 * (1 - 0.6) = 80, so the conditions are satisfied.

We can use the z-score formula to standardize the value and then use the standard normal distribution table or a calculator to find the probability.

The z-score for 65% of 200 is:

z = (0.65n - np) / √np(1-p))

z = (0.65 * 200 - 120) /√(120 * 0.4)

z = 1.44

Looking up the probability corresponding to a z-score of 1.44in the standard normal distribution table, we find that the probability is approximately 0.0749.

However, we want the probability of at least 65% passing, so we need to subtract the probability of less than 65% passing from 1.

P(X ≥ 0.65n) = 1 - P(X < 0.65n)

P(X ≥ 0.65)  =1 - 0.0749

P(X ≥ 0.65) = 0.9251

P = 0.9251 or 92.51%

Learn more on probability here;

https://brainly.com/question/23286309

#SPJ4

a coin is tossed and a die is rolled. find the probability of getting a tail and a number greater than 2.

Answers

Answer

1/3

explaination is in the pic

Probability of getting a tail and a number greater than 2 = probability of getting a tail x probability of getting a number greater than 2= 1/2 × 2/3= 1/3Therefore, the probability of getting a tail and a number greater than 2 is 1/3.

To find the probability of getting a tail and a number greater than 2, we first need to find the probability of getting a tail and the probability of getting a number greater than 2, then multiply the probabilities since we need both events to happen simultaneously. The probability of getting a tail is 1/2 (assuming a fair coin). The probability of getting a number greater than 2 when rolling a die is 4/6 or 2/3 (since 4 out of the 6 possible outcomes are greater than 2). Now, to find the probability of both events happening, we multiply the probabilities: Probability of getting a tail and a number greater than 2 = probability of getting a tail x probability of getting a number greater than 2= 1/2 × 2/3= 1/3Therefore, the probability of getting a tail and a number greater than 2 is 1/3.

To know more about Probability Visit:

https://brainly.com/question/32117953

#SPJ11

ple es abus odules nopto NC Library sources Question 15 6 pts x = z(0) + H WAIS scores have a mean of 75 and a standard deviation of 12 If someone has a WAIS score that falls at the 3rd percentile, what is their actual score? What is the area under the normal curve? enter Z (to the second decimal point) finally, report the corresponding WAIS score to the nearest whole number If someone has a WAIS score that tas at the 54th percentile, what is their actual scone? What is the area under the normal curve? anter 2 to the second decimal point finally, report s the componding WAS score to the nea whole number ple es abus odules nopto NC Library sources Question 15 6 pts x = z(0) + H WAIS scores have a mean of 75 and a standard deviation of 12 If someone has a WAIS score that falls at the 3rd percentile, what is their actual score? What is the area under the normal curve? enter Z (to the second decimal point) finally, report the corresponding WAIS score to the nearest whole number If someone has a WAIS score that tas at the 54th percentile, what is their actual scone? What is the area under the normal curve? anter 2 to the second decimal point finally, report s the componding WAS score to the nea whole number

Answers

WAIS score at the 3rd percentile: The actual score is approximately 51, and the area under the normal curve to the left of the corresponding Z-score is 0.0307.

WAIS score at the 54th percentile: The actual score is approximately 77, and the area under the normal curve to the left of the corresponding Z-score is 0.5636.

To calculate the actual WAIS scores and the corresponding areas under the normal curve:

For the WAIS score at the 3rd percentile:

Z-score for the 3rd percentile is approximately -1.88 (lookup in z-table).

Using the formula x = z(σ) + μ, where z is the Z-score, σ is the standard deviation, and μ is the mean:

x = -1.88 * 12 + 75 ≈ 51.44 (actual WAIS score)

The area under the normal curve to the left of the Z-score is approximately 0.0307 (lookup in z-table).

For the WAIS score at the 54th percentile:

Z-score for the 54th percentile is approximately 0.16 (lookup in z-table).

Using the formula x = z(σ) + μ, where z is the Z-score, σ is the standard deviation, and μ is the mean:

x = 0.16 * 12 + 75 ≈ 76.92 (actual WAIS score)

The area under the normal curve to the left of the Z-score is approximately 0.5636 (lookup in z-table).

Therefore,

The corresponding WAIS score for the 3rd percentile is 51.

The corresponding WAIS score for the 54th percentile is 77.

To learn more about normal curve visit : https://brainly.com/question/27271372

#SPJ11

Does the following linear programming problem exhibit infeasibility, unboundedness, alternate optimal solutions or is the problem solvable with one solution? Min 1X + 1Y s.t. 5X + 3Y lessthanorequalto 30 3x + 4y greaterthanorequalto 36 Y lessthanorequalto 7 X, Y greaterthanorequalto 0 alternate optimal solutions one feasible solution point infeasibility unboundedness

Answers

This line has a slope of -1 and passes through the feasible region at two points: (0,0) and (7,0). Therefore, there are two alternate optimal solutions: (0,0) and (7,0) . Hence, the given LP problem exhibits alternate optimal solutions, not infeasibility, unboundedness, or one feasible solution point.

The given Linear Programming problem exhibits alternate optimal solutions. Linear Programming (LP) is a mathematical technique that optimizes an objective function with constraints.

The main goal of LP is to maximize or minimize the objective function subject to certain constraints.

Let's examine the given LP problem and the solution to it.Min 1X + 1Y s.t. 5X + 3Y ≤ 30 3x + 4y ≥ 36 Y ≤ 7 X, Y ≥ 0 We convert the constraints to equations in the standard form:5X + 3Y + S1 = 303x + 4Y - S2 = 36Y - X + S3 = 0Where S1, S2, and S3 are the slack variables.

The solution to the problem can be obtained by using a graphical method. Here's a graph of the problem:Alternate Optimal SolutionsThe feasible region of the LP problem is shown on the graph as a shaded area. The feasible region is unbounded, which means that there is no maximum or minimum value for the objective function.

Instead, there are infinitely many optimal solutions that satisfy the constraints. In this case, the alternate optimal solutions occur at the points where the line with the objective function (1X + 1Y) is parallel to the boundary of the feasible region.

To know more about Slope  visit :

https://brainly.com/question/3605446

#SPJ11

Find the absolute maximum and absolute minimum values of the function f(x,y) = x^2+y^2-3y-xy on the solid disk x^2+y^2≤9.

Answers

The absolute maximum value of the function f(x, y) = [tex]x^2 + y^2 - 3y - xy[/tex] on the solid disk [tex]x^2 + y^2[/tex]≤ 9 is 18, achieved at the point (3, 0). The absolute minimum value is -9, achieved at the point (-3, 0).

What are the maximum and minimum values of f(x, y) = [tex]x^2 + y^2 - 3y - xy[/tex]on the disk [tex]x^2 + y^2[/tex] ≤ 9?

To find the absolute maximum and minimum values of the function f(x, y) =[tex]x^2 + y^2 - 3y - xy[/tex]on the solid disk [tex]x^2 + y^2[/tex] ≤ 9, we need to consider the critical points inside the disk and the boundary of the disk.

First, let's find the critical points by taking the partial derivatives of f(x, y) with respect to x and y and setting them equal to zero:

[tex]\frac{\delta f}{\delta x}[/tex] = 2x - y = 0 ...(1)

[tex]\frac{\delta f}{\delta y}[/tex] = 2y - 3 - x = 0 ...(2)

Solving equations (1) and (2) simultaneously, we get x = 3 and y = 0 as the critical point (3, 0). Now, we evaluate the function at this point to find the maximum and minimum values.

f(3, 0) = [tex](3)^2 + (0)^2[/tex] - 3(0) - (3)(0) = 9

So, the point (3, 0) gives us the absolute maximum value of 9.

Next, we consider the boundary of the solid disk[tex]x^2 + y^2[/tex] ≤ 9, which is a circle with radius 3. We can parameterize the circle as follows: x = 3cos(t) and y = 3sin(t), where t ranges from 0 to 2π.

Substituting these values into the function f(x, y), we get:

=f(3cos(t), 3sin(t)) = [tex](3cos(t))^2 + (3sin(t))^2[/tex] - 3(3sin(t)) - (3cos(t))(3sin(t))

= [tex]9cos^2(t) + 9sin^2(t)[/tex] - 9sin(t) - 9cos(t)sin(t)

= 9 - 9sin(t)

To find the minimum value on the boundary, we minimize the function 9 - 9sin(t) by maximizing sin(t). The maximum value of sin(t) is 1, which occurs at t = [tex]\frac{\pi}{2}[/tex] or t = [tex]\frac{3\pi}{2}[/tex].

Substituting t = [tex]\frac{\pi}{2}[/tex] and t = [tex]\frac{3\pi}{2}[/tex] into the function, we get:

f(3cos([tex]\frac{\pi}{2}[/tex]), 3sin([tex]\frac{\pi}{2}[/tex])) = 9 - 9(1) = 0

f(3cos([tex]\frac{3\pi}{2}[/tex]), 3sin([tex]\frac{3\pi}{2}[/tex])) = 9 - 9(-1) = 18

Hence, the point (3cos([tex]\frac{\pi}{2}[/tex]), 3sin([tex]\frac{\pi}{2}[/tex])) = (0, 3) gives us the absolute minimum value of 0, and the point (3cos([tex]\frac{3\pi}{2}[/tex]), 3sin([tex]\frac{3\pi}{2}[/tex])) = (0, -3) gives us the absolute maximum value of 18 on the boundary.

In summary, the absolute maximum value of the function f(x, y) = [tex]x^2 + y^2[/tex] - 3y - xy on the solid disk [tex]x^2 + y^2[/tex] ≤ 9 is 18, achieved at the point (3, 0). The absolute minimum value is 0, achieved at the point (0, 3).

Learn more about critical points and boundary analysis absolute maximum and minimum values.

brainly.com/question/31402315

#SPJ11

Showing That a Function is an Inner Product In Exercises 5, 6, 7, and 8, show that the function defines an inner product on R, where u = (u, uz, ug) and v = (V1, V2, V3). 5. (u, v) = 2u1 V1 + 3u202 + U3 V3

Answers

It satisfies the second property.3. Linearity:(u, v + w) = 2u1(V1 + W1) + [tex]3u2(V2 + W2) + u3(V3 + W3)= 2u1V1 + 3u2V2 + u3V3 + 2u1W1 + 3u2W2 + u3W3= (u, v) + (u, w)[/tex]

To show that a function is an inner product, we have to verify the following properties:Positivity of Inner product: The inner product of a vector with itself is always positive. Symmetry of Inner Product: The inner product of two vectors remains unchanged even if we change their order of multiplication.

The inner product of two vectors is distributive over addition and is homogenous. In other words, we can take a factor out of a vector while taking its inner product with another vector. Now, we have given that:(u, v) = 2u1V1 + 3u2V2 + u3V3So, we have to check whether it satisfies the above three properties or not.1. Positivity of Inner Product:If u = (u1, u2, u3), then(u, u) = 2u1u1 + 3u2u2 + u3u3= 2u12 + 3u22 + u32 which is always greater than or equal to zero. Hence, it satisfies the first property.2. Symmetry of Inner Product: (u, v) = 2u1V1 + 3u2V2 + u3V3(u, v) = 2V1u1 + 3V2u2 + V3u3= (v, u)Thus, it satisfies the second property.3. Linearity:[tex](u, v + w) = 2u1(V1 + W1) + 3u2(V2 + W2) + u3(V3 + W3)= 2u1V1 + 3u2V2 + u3V3 + 2u1W1 + 3u2W2 + u3W3= (u, v) + (u, w)[/tex]

To know more about Symmetry visit :-

https://brainly.com/question/1597409

#SPJ11

consider the functions below. f(x, y, z) = x i − z j y k r(t) = 10t i 9t j − t2 k (a) evaluate the line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1.

Answers

The line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1 is 20 + (1/3).

Hence, the required solution.

Consider the given functions:  f(x, y, z) = x i − z j y k r(t) = 10t i + 9t j − t² k(a) We need to evaluate the line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1.Line Integral: The line integral of a vector field F(x, y, z) = P(x, y, z) i + Q(x, y, z) j + R(x, y, z) k over a curve C is given by the formula: ∫C F · dr = ∫C P dx + ∫C Q dy + ∫C R dz

Here, the curve C is given by r(t), −1 ≤ t ≤ 1, which means the parameter t lies in the range [−1, 1].

Therefore, the line integral of f(x, y, z) = x i − z j + y k over the curve C is given by:∫C f · dr = ∫C x dx − ∫C z dy + ∫C y dzNow, we need to parameterize the curve C. The curve C is given by r(t) = 10t i + 9t j − t² k.We know that the parameter t lies in the range [−1, 1]. Thus, the initial point of the curve is r(-1) and the terminal point of the curve is r(1).

Initial point of the curve: r(-1) = 10(-1) i + 9(-1) j − (-1)² k= -10 i - 9 j - k

Terminal point of the curve: r(1) = 10(1) i + 9(1) j − (1)² k= 10 i + 9 j - k

Therefore, the curve C is given by r(t) = (-10 + 20t) i + (-9 + 18t) j + (1 - t²) k.

Now, we can rewrite the line integral in terms of the parameter t as follows: ∫C f · dr = ∫-1¹ [(-10 + 20t) dt] − ∫-1¹ [(1 - t²) dt] + ∫-1¹ [(-9 + 18t) dt]∫C f · dr = ∫-1¹ [-10 dt + 20t dt] − ∫-1¹ [1 dt - t² dt] + ∫-1¹ [-9 dt + 18t dt]∫C f · dr = [-10t + 10t²] ∣-1¹ - [t - (t³/3)] ∣-1¹ + [-9t + 9t²] ∣-1¹∫C f · dr = [10 - 10 + 1/3] + [(1/3) - (-2)] + [9 + 9]∫C f · dr = 20 + (1/3)

Therefore, the line integral c f · dr, where c is given by r(t), −1 ≤ t ≤ 1 is 20 + (1/3).Hence, the required solution.

To know more about curve visit:

https://brainly.com/question/26460726

#SPJ11

Assume you are using a significance level of α=0.05 to test the
claim that μ<18 and that your sample is a random sample of 40
values. Find β, the probability of making a type II error (failing
t

Answers

The probability of a type II error, given a sample size of 40 and a significance level of α=0.05.

To find the probability of making a type II error (β) when testing the claim that the population mean (μ) is less than 18, we need additional information such as the population standard deviation or the effect size. With the given information of a random sample of 40 values, we can use statistical power analysis to estimate β.

Statistical power analysis involves determining the probability of rejecting the null hypothesis (H₀) when the alternative hypothesis (H₁) is true. In this case, H₀ is that μ≥18, and H₁ is that μ<18. The probability of correctly rejecting H₀ (1-β) is referred to as the statistical power.

To calculate β, we need to specify the values of μ, the population standard deviation, and the desired significance level (α). Using software or statistical tables, we can perform power calculations to estimate β based on these values, the sample size, and the assumed effect size.

To learn more about the “null hypothesis” refer to the https://brainly.com/question/4436370

#SPJ11

A probability density function of a random variable is given by f(x)=6x7 on the interval [1, co). Find the median of the random variable, and find the probability that the random variable is between t

Answers

The probability that the random variable is between t1 and t2 is P(t1 ≤ X ≤ t2) = 3t8 - 3.

The probability density function of a random variable is given by f(x)=6x7 on the interval [1, co).

To find the median of the random variable, the value of x has to be determined. For this, we will have to integrate the function as shown below;

∫[1,x] f(t) dt = 0.5

We know that f(x) = 6x7

Integrating this expression;

∫[1,x] 6t7 dt = 0.5

Simplifying this expression, we get;

x^8 - 18 = 0.5x^8 = 18.5x = (18.5)^(1/8)

Hence the median of the random variable is (18.5)^(1/8).

Now to find the probability that the random variable is between t.

Here, we can calculate the integral of the given probability density function f(x) over the interval [t1, t2]. P(t1 ≤ X ≤ t2) = ∫t1t2 f(x) dx

The given probability density function is f(x) = 6x^7, where 1 ≤ x < ∞P( t1 ≤ X ≤ t2 ) = ∫t1t2 6x7 dx = [3x^8]t1t2

The integral of this probability density function between the interval [t1, t2] will give the probability that the random variable lies between t1 and t2, which is given by [3x^8]t1t2

Therefore, the probability that the random variable is between t1 and t2 is P(t1 ≤ X ≤ t2) = 3t8 - 3.

learn more about random variable here:

https://brainly.com/question/30789758

#SPJ11

NEED ASAP
2. Find the margin error E. (5pts) 90% confidence level, n = 12, s = 1.23 3. Find the margin of error. (5pts) lower limit= 25.65 Upper limit= 28.65

Answers

The margin error E at a 90% confidence level is approximately 0.584.

The margin error E at a 90% confidence level, with a sample size of n = 12 and a standard deviation of s = 1.23, can be calculated as follows:

The formula for calculating the margin of error (E) at a specific confidence level is given by:

E = z * (s / √n)

Where:

- E represents the margin of error

- z is the z-score corresponding to the desired confidence level

- s is the sample standard deviation

- n is the sample size

To calculate the margin error E for a 90% confidence level, we need to find the z-score associated with this confidence level. The z-score can be obtained from the standard normal distribution table or by using statistical software. For a 90% confidence level, the z-score is approximately 1.645.

Plugging in the values into the formula, we have:

E = 1.645 * (1.23 / √12)

  ≈ 1.645 * (1.23 / 3.464)

  ≈ 1.645 * 0.355

  ≈ 0.584

Therefore, the margin error E at a 90% confidence level is approximately 0.584.

To know more about margin error, refer here:

https://brainly.com/question/29419047#

#SPJ11

find the riemann sum for f(x) = x − 1, −6 ≤ x ≤ 4, with five equal subintervals, taking the sample points to be right endpoints.

Answers

The Riemann sum for `f(x) = x − 1`, `−6 ≤ x ≤ 4`, with five equal subintervals, taking the sample points to be right endpoints is `-10`.

The Riemann sum for `f(x) = x − 1`, `−6 ≤ x ≤ 4`, with five equal subintervals, taking the sample points to be right endpoints is shown below:

The subintervals have a width of `Δx = (4 − (−6))/5 = 2`.

Therefore, the five subintervals are:`[−6, −4], [−4, −2], [−2, 0], [0, 2],` and `[2, 4]`.

The right endpoints of these subintervals are:`−4, −2, 0, 2,` and `4`.

Thus, the Riemann sum for `f(x) = x − 1`, `−6 ≤ x ≤ 4`, with five equal subintervals, taking the sample points to be right endpoints is:`

f(−4)Δx + f(−2)Δx + f(0)Δx + f(2)Δx + f(4)Δx`$= (−5)(2) + (−3)(2) + (−1)(2) + (1)(2) + (3)(2)$$= −10 − 6 − 2 + 2 + 6$$= −10$.

Therefore, the Riemann sum for `f(x) = x − 1`, `−6 ≤ x ≤ 4`, with five equal subintervals, taking the sample points to be right endpoints is `-10`.

The Riemann sum for `f(x) = x − 1`, `−6 ≤ x ≤ 4`, with five equal subintervals, taking the sample points to be right endpoints is `-10`.

To know more about Riemann sum visit:

https://brainly.com/question/29673931

#SPJ11

types of tigers in Tadoba in Maharashtra

Answers

The Bengal tiger is the dominant subspecies in the region and is the main type of tiger you will encounter in Tadoba National Park.

In Tadoba National Park located in Maharashtra, India, you can find the Bengal tiger (Panthera tigris tigris). The Bengal tiger is the most common and iconic subspecies of tiger found in India and is known for its distinctive orange coat with black stripes.

Tadoba Andhari Tiger Reserve, which encompasses Tadoba National Park, is known for its thriving population of Bengal tigers. The reserve is home to several individual tigers, each with its own unique characteristics and territorial range.

While the Bengal tiger is the primary subspecies found in Tadoba, it is worth noting that tiger populations can exhibit slight variations in appearance and behavior based on their specific habitat and geographical location. However, the Bengal tiger is the dominant subspecies in the region and is the main type of tiger you will encounter in Tadoba National Park.

For more questions on dominant

https://brainly.com/question/20436333

#SPJ8

A simple random sample from a population with a normal distribution of 100 body temperatures has x = 98.40°F and s=0.61°F. Construct a 90% confidence interval estimate of the standard deviation of body temperature of all healthy humans. Click the icon to view the table of Chi-Square critical values. **** °F<<°F (Round to two decimal places as needed.) A survey of 300 union members in New York State reveals that 112 favor the Republican candidate for governor. Construct the 98% confidence interval for the true population proportion of all New York State union members who favor the Republican candidate. www OA. 0.304

Answers

A 90% confidence interval estimate of the standard deviation of body temperature of all healthy humans is done below:

Given:

Sample size(n) = 100

Sample mean(x) = 98.40°

Sample standard deviation(s) = 0.61°F

Level of Confidence(C) = 90% (α = 0.10)

Degrees of Freedom(df) = n - 1 = 100 - 1 = 99

The formula for the confidence interval estimate of the standard deviation of the population is:((n - 1)s²)/χ²α/2,df < σ² < ((n - 1)s²)/χ²1-α/2,df

Now we substitute the given values in the formula above:((n - 1)s²)/χ²α/2,df < σ² < ((n - 1)s²)/χ²1-α/2,df((100 - 1)(0.61)²)/χ²0.05/2,99 < σ² < ((100 - 1)(0.61)²)/χ²0.95/2,99(99)(0.3721)/χ²0.025,99 < σ² < (99)(0.3721)/χ²0.975,99(36.889)/χ²0.025,99 < σ² < 36.889/χ²0.975,99

Using the table of Chi-Square critical values, the values of χ²0.025,99 and χ²0.975,99 are 71.42 and 128.42 respectively.

Finally, we substitute these values in the equation above to obtain the 90% confidence interval estimate of the standard deviation of body temperature of all healthy humans:36.889/128.42 < σ² < 36.889/71.42(0.2871) < σ² < (0.5180)Taking square roots on both sides,0.5366°F < σ < 0.7208°F

Hence, the 90% confidence interval estimate of the standard deviation of body temperature of all healthy humans is given as [0.5366°F, 0.7208°F].

To know more about standard deviation  visit:

https://brainly.com/question/29115611

#SPJ11

Questions 6-7: If P(A)=0.41, P(B) = 0.54, P(C)=0.35, P(ANB) = 0.28, and P(BNC) = 0.15, use the Venn diagram shown below to find A B [infinity] 6. P(AUBUC) a) 0.48 b) 0.87 c) 0.78 7. P(A/BUC) 14 8. Which of t

Answers

The calculated value of the probability P(A U B U C) is (b) 0.87

How to calculate the probability

From the question, we have the following parameters that can be used in our computation:

The Venn diagram (see attachment), where we have

P(A) = 0.41P(B) = 0.54P(C) = 0.35P(A ∩ B) = 0.28P(B ∩ C) = 0.25

The probability expression P(A U B U C) is the union of the sets A, B and C

This is then calculated as

P(A U B U C) = P(A) + P(B) + P(C) - P(A ∩ B) - P(B ∩ C)

By substitution, we have

P(A U B U C) = 0.41 + 0.54 + 0.35 - 0.28 - 0.15

Evaluate the sum

P(A U B U C) = 0.87

Learn more about venn diagram here:

https://brainly.com/question/2099071

#SPJ1

what is the volume of a cube with an edge length of 2.5 ft? enter your answer in the box. ft³

Answers

The Volume of a cube with an edge length of 2.5 ft is 15.625 ft³.

To calculate the volume of a cube, we need to use the formula:

Volume = (Edge Length)^3

Given that the edge length of the cube is 2.5 ft, we can substitute this value into the formula:

Volume = (2.5 ft)^3

To simplify the calculation, we can multiply the edge length by itself twice:

Volume = 2.5 ft * 2.5 ft * 2.5 ft

Multiplying these values, we get:

Volume = 15.625 ft³

Therefore, the volume of the cube with an edge length of 2.5 ft is 15.625 ft³.

Understanding the concept of volume is important in various real-life applications. In the case of a cube, the volume represents the amount of space enclosed by the cube. It tells us how much three-dimensional space is occupied by the object.

The unit of measurement for volume is cubic units. In this case, the volume is measured in cubic feet (ft³) since the edge length of the cube was given in feet.

When calculating the volume of a cube, it's crucial to ensure that the units of measurement are consistent. In this case, the edge length and the volume are both measured in feet, so the final volume is expressed in cubic feet.

By knowing the volume of a cube, we can determine various characteristics related to the object. For example, if we know the density of the material, we can calculate the mass by multiplying the volume by the density. Additionally, understanding the volume is essential when comparing the capacities of different containers or determining the amount of space needed for storage.

In conclusion, the volume of a cube with an edge length of 2.5 ft is 15.625 ft³.

For more questions on Volume .

https://brainly.com/question/30610113

#SPJ8

A teachers’ association publishes data on salaries in the public school system annually. The mean annual salary of ​(public) classroom teachers is ​$54.7 thousand.Assume a standard deviation of $8.0 thousand.
What is the probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most​ $1 thousand i.e., between $53.7 thousand and $55.7 thousand? (Round answer to the nearest ten-thousandth, the fourth decimal place.)

Answers

The required probability is 0.0828.

The probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most $1 thousand is 0.0828 (rounded to four decimal places).

Solution:

Given that,Mean annual salary of (public) classroom teachers = $54.7 thousand Standard deviation = $8.0 thousand

The sample size of the classroom teachers = 64Sample error = $1 Thousand The standard error is given by the formula;[tex] \large \frac{\sigma}{\sqrt{n}} = \frac{8}{\sqrt{64}}[/tex]  = 1

And the Z-score is given by the formula;[tex] \large Z = \frac{\overline{x}-\mu}{\frac{\sigma}{\sqrt{n}}}[/tex]Substituting the given values, we getZ = [tex] \large \frac{55.7-54.7}{1}[/tex] = 1

The probability of sampling error is the area between 53.7 and 55.7. Thus, to find the probability we have to calculate the area under the normal curve from z = -1 to z = +1.

That is;P ( -1 ≤ Z ≤ 1) = 0.6826The probability of the sampling error exceeding $1,000 is the area outside the range of 53.7 to 55.7. Thus, to find the probability we have to calculate the area under the normal curve from z = -∞ to z = -1 and from z = +1 to z = +∞.

That is;P(Z < -1 or Z > 1) = P(Z < -1) + P(Z > 1)P(Z < -1) = 0.1587 (from the standard normal table)P(Z > 1) = 0.1587Hence, P(Z < -1 or Z > 1) = 0.1587 + 0.1587 = 0.3174

Therefore, the probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most $1 thousand is 0.6826 and

the probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be more than $1 thousand is 0.3174.

The probability that the sampling error made in estimating the population mean salary of all classroom teachers by the mean salary of a sample of 64 classroom teachers will be at most $1 thousand is 0.0828 (rounded to four decimal places).

To learn more about : probability

https://brainly.com/question/251701

#SPJ8

Other Questions
suppose the voltage in an electrical circuit varies with time according to the formula v(t) = 90 sin(t) for t in the interval [0,]. the numerical value of the mean voltage in the circuit is Question C1 Discuss and provide any THREE key benefits virtual banks would bring to retail customers. Also discuss and provide any THREE key bad / adverse impacts they would bring to traditional banks. Assume that you are the marketing manager of a virtual bank, explain and suggest any TWO new products to be introduced to generate additional non-interest bearing income for the bank. Suppose you have an opportunity to invest in a fund that pays 12% interest compounded annually. Today, you invest $10,000 into this fund. Three years later (EOY 3), you borrow $5,000 from a local bank at 10% annual interest and invest it in the fund. Two years later (EOY 5), you withdraw enough money from the fund to repay the bank start loan and all interest due on it. Three years from this withdrawal (EOY 8) you taking $2,000 per year out of the fund. After five withdrawals of $2,000, you have withdrawn your original $10,000. The amount remaining in the fund is earned interest. How much remains? Hint: Draw a cash-flow diagram. Explain depreciation, computation, recording of straight-line depreciation for fiscal years 2021 and 2022 using the following fact pattern, He purchased a truck on March 1, 2021 for $100,000. The truck has an estimated useful life of 10 years at which time it is expected to have a $5,000 salvage value. He uses the calendar year for financial reporting. "Discuss the recruitment and selection function of an and the organization benefits or a diverse work force." case example using practitioners guide to ethical decision making Tally job satisfaction in general completely dissatisfied completely satisfied fairly dissatisfied fairly satisfied neither satisfied nor dissatisfied very dissatisfied very satisfied |N= * 11 Count 5 GE is selling locomotives to China. If GE requires China to pay USD instead of RMB, O GE is shifting its FX exposure to China China is better-off in this case O this is hedging exposure through invoice currency from the perspective of GE O A and C O B and C between which pair of decimals should 4/7 be placed on a number lineo0.3 and 0.4o0.4 and 0.5o0.5 and 0.6o0.6 and 0.7 what does your data tell you about visual, verbal, and tactile responses? Arrange the following groups of atoms in order of increasing first ionization energy. (Use the appropriate symbol to separate substances in the list.)a) Be, Rb, Nab) Se, Se, Tec) Br, Ni, Kd) Ne, Sr, Se category ii electric meters are safe for working on which types of circuits Let (inverse) demand be Pb = 93 - 6 Qb and (inverse) supply be Pv = 29 + 2 Qv. Consider the shift in demand illustrated (the intercept of Pb moves by 14 ), which of the following is the most likely cause of the shift depicted: (1) A decrease in consumer income if the good is NORMAL; (2) A decrease in consumer income if the good is INFERIOR; (3) A decrease in the price of a substitute to the good; (4) An increase in the price of a complement to the good; (5) All of the above. Consider two goods, and where the price of x is $10 and the price of x2 is $20. The consumer's income is $100 and the utility function is below: U (x1, x2) = x(x + 2) (1) How much of and will the consumer choose? Solve mathematically and show all work. Draw budget line and utility function. Label all axis and choice set. . Hint: MU = x +2; MU = X1 Explain the effect of an appreciation of dollar on AD andAS.Require about 200 words. DO NOT COPY AND PASTE. please beprecise to the question and answer in OWN WORDS. Which choice lists the following compounds in order of increasing solubility in water?I. CH3CH2CH2CH3 II. CH3CH2OCH2CH3 III. CH3CH2OH IV. CH3OHA. I < III < IV < IIB. I < II < IV < IIIC. III < IV < II < ID. I < II < III < IV what are the roots of y = x2 3x 10?3 and 102 and 52 and 53 and 10 7 and 8 please. This is a list of criminal record convictions of a cohort of 395 boys obtained from a prospective epidemiological study. Ntmibetaticometeuone 0 265 49 1.Calculate the mean number of convictions for this sample 2.Calculate the variance for the number of convictions in this sample. 3.Calculate the standard deviation for the number of convictions in this sample. 4.Calculate the standard error for the number of convictions in this sample 5. State the range for the number of convictions in this sample 6. Calculate the proportion of each category i.e.number of convictions). 7. Calculate the cumulative relative frequency for the data 8. Graph the cumulative frequency distribution. 1 21 19 18 10 2 10 11 12 13 1 10. Circle the correct statement below about magnetic reversals documented during earth's history. A. There have been at least 10 reversals in the last 10 thousand years. B. There have been at least 1 In preparing its bank reconciliation at December 31, 2022, Granville Company had available the following data:Balance per bank statement, 31/12/22$40,035Deposit in transit, 31/12/226,300Outstanding cheques, 31/12/227,450Amount erroneously credited by the bank to company's account, 28/12/22200Bank service charges for December120Granville Company's adjusted cash balance at December 31, 2022, isA. $38,685.B. $39,085.C. $26,085.D. $38,565.