For the given reactions determine if the entropy increases or decreases.

A) 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g)

B) CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O

Answer:

chlorine

Explanation:

Answer:chlorine reacts with hydrogen peroxide

Explanation:

Answer:

The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.

But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.

Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.

I hope this helps have a great day :)

Answer:

If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.

Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.

Hence, if  the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.

Learn more: https://brainly.com/question/13440572

Answer:

1.1 million pounds

Explanation:

Answer:

1.1 million pounds

Explanation:

that's a lot of water above us!!

Answer:

A mixture of chlorine gas (Cl2) and fluorine gas (F2):

✔ London dispersion forces

Explanation:

Answer:

Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O

The reactants are present in equimolar amounts, so there is no excess or limiting reactants.

(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O

(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J

(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O

Explanation:

Answer:

oxygen (O2 )

Explanation:

Yes according to reliable sources.

Answer:

the lowest point of the wave is called Trough

Answer:

Trough is the correct answer

Explanation:

The highest part of the wave is called the crest. The lowest part is called the trough.

Explanation:

the investigation lasts for 7 days.

hope this helps you.

Answer: The following information should be included;

What is the difference between the greenhouse effect, climate change and global warming?

What proof do we have that climate change is happening?

Why is it happening?

Answer:

Every germanium atom is tetrahedrally linked to four sulphur atoms, with an interatomic distance of 2.19A. The angle between the two sulphur bonds is 103°.

hope this helps

An interatomic distance of 2.19A exists between each germanium atom and the four sulphur atoms that are tetrahedrally connected to it. The two sulphur bonds form a 103° angle.

A complex molecule's or ion's bond angle is the angle between the two bonds, or the angle between two orbitals that contain bonding electron pairs surrounding the central atom. It is determined using a spectroscopic approach and measured in degrees.

Any angle between two bonds that share an atom is known as a bond angle, and it is often measured in degrees. The distance along the straight line between the nuclei of two bound atoms is known as a bond distance.

Bond angles also have a role on a molecule's structure. The angles between neighboring lines that form bonds are known as bond angles. The difference between linear, trigonal planar, tetrahedral, trigonal-bipyramidal, and octahedral crystals may be determined by the bond angle.

Thus,  The two sulphur bonds form a 103° angle.

To learn more about bond angle, follow the link;

https://brainly.com/question/14089750

#SPJ2

To balance a chemical equation you must pay attention that the algebraic equation has the same number of element atoms in reactant and the product.

A chemical equation is a term to refer to the symbolic description of a chemical reaction, that is, the written representation of symbols. For example:

The balance of an equation can be related to the law of conservation of matter, that is, the number of atoms of each element in the reactants is in the result.

Note: This question is incomplete, because the information some information is missing.

Learn more in: https://brainly.com/question/12271256

Answer:

EDTA disodium salt | C10H14N2Na2O8

Explanation:

As the solar nebula cooled METAL compounds are the first to condense from a gas to a solid. The solar nebula gave birth to the Solar system.

A solar nebula is a disc-shaped cloud of gases and grain dust, which gave birth to the Sun and planets of the Solar system, approximately 4.6 billion years ago.

The solar nebula is at the beginning a mixture of interstellar gases (hydrogen and helium) and dust grains.

As the solar nebula cools, heavy elements such as metals in the disk condensate into planetesimals.

Learn more in:

https://brainly.com/question/14151385

Answer:

1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.

2. It is a controlled experiment.

Explanation:

In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .

Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.

A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.

In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.

A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.

When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.

Thus, based on the independent variable, the responding variable, or dependent variable, alters.

To learn more about independent variable, follow the link;

https://brainly.com/question/967776

#SPJ2

The answer would be 4.

The agencies are:

Department of Agriculture's Forest Service (AFS)

Department of the Interior's Bureau of Land Management (BLM)

Fish and Wildlife Service (FWS)

National Park Service (NPS)

These four agencies cover around 95% of the land and are the only federal agencies.

I learned about these agencies in school.

Answer:

1.345.0

Explanation:

Hope this helpssss

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct choice is ~ D

Solute is the substance that dissolves into another substance

Using Hess's law we found:

1) By adding reaction 10.2 with the reverse of reaction 10.1 we get reaction 10.3:

KOH(aq) + HCl(aq)  → H₂O(l) + KCl(aq)   ΔH  (10.3)

2) The ΔHsoln must be subtracted from ΔHneut to get the total change in enthalpy (ΔH).    

The reactions of dissolution (10.1) and neutralization (10.2) are:

KOH(s) → KOH(aq)   ΔHsoln    (10.1)

KOH(s) + HCl(aq) → H₂O(l) + KCl(aq)     ΔHneut     (10.2)

1) According to Hess's law, the total change in enthalpy of a reaction resulting from differents changes in various reactions can be calculated as the sum of all the enthalpies of all those reactions.      

Hence, to get reaction 10.3:

KOH(aq) + HCl(aq) → H₂O(l) + KCl(aq)    (10.3)

We need to add reaction 10.2 to the reverse of reaction 10.1

KOH(s) + HCl(aq) + KOH(aq) → H₂O(l) + KCl(aq) + KOH(s)

Canceling the KOH(s) from both sides, we get reaction 10.3:

KOH(aq) + HCl(aq)  → H₂O(l) + KCl(aq)    (10.3)

2) The change in enthalpy for reaction 10.3 can be calculated as the sum of the enthalpies ΔHsoln and ΔHneut:

[tex] \Delta H = \Delta H_{soln} + \Delta H_{neut} [/tex]

The enthalpy of reaction 10.1 (ΔHsoln) changed its sign when we reversed reaction 10.1, so:

[tex] \Delta H = \Delta H_{neut} - \Delta H_{soln} [/tex]

Therefore, the ΔHsoln must be subtracted from ΔHneut to get the total change in enthalpy ΔH.

Learn more here:

I hope it helps you!

The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L

We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:

Mass of NaOH = 72.2 g

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Mole = mass / molar mass

Mole of NaOH = 72.2 / 40

2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O

From the balanced equation above,

2 moles of NaOH reacted with 1 mole of H₂SO₄.

Therefore,

1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.

Mole of H₂SO₄ = 0.9025 mole

Molarity of H₂SO₄ = 0.170 M

Volume = mole / Molarity

Volume of H₂SO₄ = 0.9025 / 0.170

Thus, the volume of H₂SO₄ needed for the reaction is 5.31 L

Learn more: https://brainly.com/question/14356462

Answer:The plates are not fixed but are constantly moving atop a layer of solid and molten rock called the mantle. The Ring of Fire is a string of volcanoes and sites of seismic activity, or earthquakes, around the edges of the Pacific Ocean. ... A hotspot is a place in the middle of a tectonic plate where hot magma rises.

Explanation:

Answer:

heat the solution

Explanation:

i think

Answer:

The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.

Taking into account the definition of pH and pOH, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.

First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pH + pOH= 14

In this case, being pOH= 9.50, pH is calculated as:

pH + 9.40= 14

pH= 14 - 9.50

pH= 4.50

Replacing in the definition of pH the concentration of H⁺ ions is obtained:

- log [H⁺]= 4.50

Solving :

[H⁺]= 10⁻⁴ ⁵

[H⁺]= 3.16×10⁻⁵ M

The numerical scale that measures the pH of the substances includes the numbers from 0 to 14, being acidic solutions with a pH lower than 7, and basic those with a pH greater than 7. The pH = 7 indicates the neutrality of the solution.

In this case, the pH has a value of 4.50. So, the solution is acidic.

In summary, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.  

Learn more:

This problem is describe the mole-ratio composition of an allow composed by tin, lead and cadmium. Ratios are given as Sn:Pb 2.73:1.00 and Pb:Cd is 1.78:1.00, and we are asked to calculate the mass percent compositon of Pb in the allow.

In this case, according to the given information, it turns out possible realize that the following number of moles are present in the alloy, according to the aforementioned ratios:

[tex]2.73mol Sn\\\\1.00molPb\\\\\frac{1.00molPb*1.00molCd}{1.78molPb}= 0.562molCd[/tex]

Next, we calculate the masses by using each metal's atomic mass:

[tex]m_{Sn}=2.73mol*\frac{118.7g}{1mol}=324.05g\\\\ m_{Pb}=1.00mol*\frac{207.2g}{1mol}=207.2g\\\\m_{Cd}=0.562mol*\frac{112.4g}{1mol}=63.2g[/tex]

Thus, the mass percent composition of each metal is shown below:

[tex]\%Sn=\frac{324.05g}{324.05g+207.2g+63.2g} *100\%=54.5\%\\\\\%Pb=\frac{207.2g}{324.05g+207.2g+63.2g} *100\%=34.9\%\\\\\%Cd=\frac{63.2}{324.05g+207.2g+63.2g} *100\%=10.6\%[/tex]

So that of lead is 34.9 %.

Learn more:

Considering the definition of percentage by mass and molality, the molality of Na₃PO₄ in the solution is 0.948 [tex]\frac{moles}{kg}[/tex].

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]

Molality is the ratio of the number of moles of any dissolved solute to kilograms of solvent.

The Molality of a solution is determined by the expression:

[tex]molality=\frac{number of moles of solute}{kilograms of solvent}[/tex]

Considering 100 grams as a sample of the solution, then the value of the percentage of concentration given indicates that  13.5 g correspond to Na₃PO₄.

Remember that percent concentration by mass is calculated using the mass of solute and the mass of the solution, which includes both the solute and the solvent. Then:

mass solution= mass solute + mass solvent

100 g= 13.5 g + mass solvent

100 g - 13.5 g= mass solvent

86.5 g= mass solvent

Then, you know:

Then, replacing in the definition of molality:

[tex]molality=\frac{0.082 moles}{0.0865 kg}[/tex]

Solving:

molality= 0.948 [tex]\frac{moles}{kg}[/tex]

Finally, the molality of Na₃PO₄ in the solution is 0.948 [tex]\frac{moles}{kg}[/tex].

Learn more about: