For waves moving through the atmosphere at a constant velocity, higher frequency waves must have proportionally longer wavelengths.
a) true
b) false

Answer:

a)   p = 95.66 cm, b) p = 93.13 cm

Explanation:

For this problem we use the  constructor equation

         [tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]

where f is the focal length, p and q are the distances to the object and the image, respectively

the power of the lens is

         P = 1 / f

         f = 1 / P

         f = 1 / 2.25

         f = 0.4444 m

the distance to the object is

         [tex]\frac{1}{p} = \frac{1}{f} -\frac{1}{q}[/tex]

the distance to the image is

          q = 85 -2

           q = 83 cm

we must have all the magnitudes in the same units

           f = 0.4444 m = 44.44 cm

we calculate

           [tex]\frac{1}{p} = \frac{1}{44.44} - \frac{1}{83}[/tex]

           1 / p = 0.010454

            p = 95.66 cm

b) if they were contact lenses

            q = 85 cm

            [tex]\frac{1}{p} = \frac{1}{44.44} - \frac{1}{85}[/tex]

             1 / p = 0.107375

             p = 93.13 cm

Answer: The correct statement is:

--> The voltage across each resistor is the same.

Explanation:

RESISTORS are defined as the components of an electric circuit which are capable of creating resistance to the file of electric current in the circuit. They work by converting electrical energy into heat, which is dissipated into the air. These resistors can be divided into two according to their arrangements in the electric cell. It include:

--> Resistors in parallel and

--> Resistors in series

RESISTORS are said to be in parallel when two or more resistance or conductors are connected to common terminals so that the potential difference ( voltage) across each conductor IS THE SAME but with different current flow through each of them. Also, Individual resistances diminish to equal a smaller total resistance rather than add to make the total.

Answer:

True. A permanent magnet like the earth produces its own B field due to movement of the iron core. The earths magnetic field is the reason why we have an atmosphere and it also is the only defense against solar flares. A coil of wire or solenoid that has current have so much moving charge that the motion of the electrical charge can create a significant G b-field

Answer:

Smaller and upside down

Explanation:

To answer the question, we must recognise that the characteristics of the image formed by a convex lens depends on the position of the object from the lens.

From the diagram given in the question above, the following data were obtained:

1. The image is smaller than the object.

2. The image is inverted i.e upside down.

3. The image is closer to the lens

4. The image between 2f and f

Now, considering the options given in question above, the correct answer to the question is:

The image is smaller and upside down.

Answer:

0.857 cm

Explanation:

We are given that:

The focal length for a convex lens to be (f) = 1.5cm

The object distance (u) = - 2.0 cm

We are to determine the image distance (v) = ??? cm

By applying the lens formula:

[tex]\dfrac{1}{f} = \dfrac{1}{u}+\dfrac{1}{v}[/tex]

By rearrangement and making (v) the subject of the above formula:

[tex]v = \dfrac{uf}{u-f}[/tex]

replacing the given values:

[tex]v = \dfrac{(-2.0)(1.5)}{(-2.0 -1.5)}[/tex]

[tex]v = \dfrac{-3.0}{(-3.5)}[/tex]

v = 0.857 cm

Answer:

The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.

Explanation:

Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:

First skater

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)

Second skater

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)

Where:

[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.

[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.

[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.

[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.

[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.

[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.

If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:

By (1):

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]

[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]

[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]

[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]

[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]

By (2):

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]

[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]

[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]

[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]

Answer:

v₂ = 53.23 m/s

Explanation:

Given that,

The mass of a golf club, m₁ = 158 g = 0.158 kg

The initial speed of a golf club, u₁  =  48.2 m/s

The mass of a golf ball, m₂ = 46 g = 0.046 kg

It was at rest, u₂ = 0

Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s, v₁ = 32.7 m/s

We use the conservation of energy to find the speed of the golf ball just after impact as follows :

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\v_2=\dfrac{m_1u_1-m_1v_1}{m_2}\\\\v_2=\dfrac{0.158(48.2)-0.158(32.7)}{0.046}\\\\=53.23\ m/s[/tex]

So, the speed of the golf ball just after the impact is equal to 53.23 m/s.

Answer:

b.have frequencies that are integer multiples of the frequency of the complex waveform

Explanation:

Please correct me if I am wrong

Answer:

c)  N_s / N_p = 115.15

Explanation:

Let's look for the voltage in the secondary, they do not indicate the power dissipated

          P = V_s i

          V_s = P / i

          V_s = 76 / 5.5 10⁻³

          V_s = 13.818 10³ V

the relationship between the primary and secondary of a transformer is

           [tex]\frac{V_p}{N_p} = \frac{V_s}{N_s}[/tex]

           [tex]\frac{N_s}{N_p} = \frac{V_s}{V_p}[/tex]

           Ns / Np = 13,818 10³ /120

           N_s / N_p = 115.15

Answer:

7.46×10⁻⁶ m

Explanation:

Applying,

F = kqq'/r²............ Equation 1

make r the subject of the equation

r = √(F/kqq').......... Equation 2

From the question,

Given: F = 8 N, q' = q= 4 C

Constant: k = 8.98×10⁹ Nm²/C²

Substitute these values into equation 2

r = √[8/(4×4×8.98×10⁹)]

r = √(55.7×10⁻¹²)

r = 7.46×10⁻⁶ m

Answer:

1.67 N

Explanation:

Applying,

F = u(dm/dt)+m(du/dt)................ Equation 1

Where F = force, m = mass of the vehicle, u = speed.

Since u is constant,

Therefore, du/dt = 0

F = u(dm/dt)............... Equation 2

From the question,

Given: u = 10 m/s, dm/dt = 10 kg/min = (10/60) kg/s

Substitute these values into equation 2

F = 10(10/60)

F = 100/60

F = 1.67 N

Answer:

Explanation:

This is a simple Law of Momentum Conservation problem of the inelastic type. The equation for this is

[tex][m_1v_1+m_2v_2]_b=[(m_1+m_2)v]_a[/tex]  Filling in:

[tex][1200(4.5)+2100(0)]=[(1200+2100)v][/tex] which simplifies to

5400 + 0 = 3300v

so v = 1.6 m/s to the east, choice B

Answer:

P =40.69 atm

Explanation:

We need to find the approximate pressure at a depth of 400 m.

It can be calculated as follows :

P = Patm + ρgh

Put all the values,

[tex]P=1\ atm+1025 \times 9.81\times 400\times 9.8692\times 10^{-6}\ atm/Pa\\\\P=40.69\ atm[/tex]

So, the approximate pressure is equal to 40.69 atm.

Answer:

The highest point in the trajectory occurs at the midpoint of the path. This highest point increases as the angle increases. At a 75° launch angle, the maximum height is approximately 76 meters. However, a further increase in launch angle beyond this 75° angle will increase the peak height even more.

Answer:

978.6084 Newton

Explanation:

Given the following data;

To find the weight in Newtown;

Conversion:

1 lb = 4.448220 N

220 lb = 220 * 4.448220 = 978.6084 Newton

220 lb = 978.6084 Newton

Therefore, the weight of the astronaut in Newton is 978.6084.

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

Weight = mg

Where;

Note:

Answer:

(i)8m/s²(ii)40m/s

Explanation:

according to the formula

½at²=s.

then substituting the data

½a•5²=100

a=8m/s²

v=at=8•5=40m/s

Answer:

(I)

[tex]{ \bf{s = ut + \frac{1}{2} a {t}^{2} }} \\ 100 = (0 \times 5) + \frac{1}{2} \times a \times {5}^{2} \\ 200 = 25a \\ { \tt{acceleration = 8 \: m {s}^{ -2} }}[/tex]

(ii)

[tex]{ \bf{v = u + at}} \\ v = 0 + (8 \times 5) \\ { \tt{final \: velocity = 40 \: m {s}^{ - 1} }}[/tex]

Answer:

The impact force is 98000 N.

Explanation:

mass = 10 tons

The impact force is the weight of the object.

Weight =mass x gravity

W = 10 x 1000 x 9.8

W = 98000 N

The impact force is 98000 N.

Answer:

Test 1

1.True

2.True

3.True

4.False

5.True

6.True

7.False

8.True

9.True

10.True

yung iba nasa pic

Answer:

False

Explanation:

You have a circle so think back to circular motion. Theres 2 directions, centripetal and tangential. The problem tells you there's a constant tangential speed so tangential acceleration is 0. However there is a centripetal acceleration acting on the ball that holds it in its circular motion (i.e. tension, or gravity). Since centripetal is perpendicular to the tangential direction, acceleration and velocity are in different directions.

Answer:

have an increased resistance

Answer:

3.464 seconds.

Explanation:

We know that we can write the period (the time for a complete swing) of a pendulum as:

[tex]T = 2*\pi*\sqrt{\frac{L}{g} }[/tex]

Where:

[tex]\pi = 3.14[/tex]

L is the length of the pendulum

g is the gravitational acceleration:

g = 9.8m/s^2

We know that the original period is of 2.00 s, then:

T = 2.00s

We can solve that for L, the original length:

[tex]2.00s = 2*3.14*\sqrt{\frac{L}{9.8m/s^2} }\\\\\frac{2s}{2*3.14} = \sqrt{\frac{L}{9.8m/s^2}}\\\\(\frac{2s}{2*3.14})^2*9.8m/s^2 = L = 0.994m[/tex]

So if we triple the length of the pendulum, we will have:

L' = 3*0.994m = 2.982m

The new period will be:

[tex]T = 2*3.14*\sqrt{\frac{2.982m}{9.8 m/s^2} } = 3.464s[/tex]

The new period will be 3.464 seconds.

Answer:

because minerals can be gotten from the bottom

Explanation:

it's self explanatory

Answer:

f = 1 m

Explanation:

The magnification of the lens is given by the formula:

[tex]M = \frac{q}{p}[/tex]

where,

M = Magnification = 4

q = image distance = 5 m

p = object distance = ?

Therefore,

[tex]4 = \frac{5\ m}{p}\\\\p = \frac{5\ m}{4}\\\\p = 1.25\ m[/tex]

Now using thin lens formula:

[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}\\\\\frac{1}{f} = \frac{1}{1.25\ m}+\frac{1}{5\ m}\\\\\frac{1}{f} = 1\ m^{-1}\\\\[/tex]

f = 1 m

Answer:

-45,597.07

Explanation:

if not in scientific calculator and yung answer nung sa scientific sa comment na lang dinadownload ko ka eh

Answer:

1.67 m

Explanation:

The potential energy change of the small ball ΔU equals the work done by the buoyant force, W

ΔU = -W

Now ΔU = mgΔh where m = mass of small ball = ρV where ρ = density of small ball and V = volume of small ball. Δh = h - h' where h = final depth of small ball and h' = initial height of small ball = 5 m. Δh = h - 5

ΔU = mgΔh

ΔU = ρVgΔh

Now, W = ρ'VgΔh'   where ρ = density of water and V = volume of water displaced = volume of small ball. Δh' = h - h' where h = final depth of small ball and h' = initial depth of small ball at water surface = 0 m. Δh' = h - h' = h - 0 = h

So, ΔU = -W

ρVgΔh = -ρ'VgΔh'

ρVg(h - 5) = -ρ'Vgh

ρ(h - 5) = -ρ'h

Since the density of the small ball equals 1/2 the density of water,

ρ = ρ'/2

ρ(h - 5) = -ρ'h

(ρ'/2)(h - 5) = -ρ'h

ρ'(h - 5)/2 = -ρ'h

(h - 5)/2 = -h

h - 5 = -2h

h + 2h = 5

3h = 5

h = 5/3

h = 1.67 m

So, the maximum depth the ball reaches is 1.67 m.

[tex]E_0=1.5033×10^{-10}\:\text{J}[/tex]

Explanation:

The rest energy [tex]E_0[/tex] of a proton of mass [tex]m_p[/tex] is given by

[tex]E_0 = m_pc^2[/tex]

[tex]\:\:\:\:\:\:\:=(1.6726×10^{-27}\:\text{kg})(2.9979×10^8\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\:\:=1.5033×10^{-10}\:\text{J}[/tex]

Answer:

The right solution is "[tex]4.5\times 10^{-10} \ Cm[/tex]".

Explanation:

Given that,

q = 0.50 nC

d = 900 mm

As we know,

⇒ [tex]P=qd[/tex]

By putting the values, we get

⇒     [tex]=0.50\times 900[/tex]

⇒     [tex]=(0.50\times 10^{-9})\times 0.9[/tex]

⇒     [tex]=4.5\times 10^{-10} \ Cm[/tex]  

Answer:

The dipole moment is 4.5 x 10^-10 Cm.

Explanation:

Charge on each ball, q = 0.5 nC

Length, L = 900 mm = 0.9 m

The dipole moment is defined as the product of either charge and the distance between them.

It is a vector quantity and the direction is from negative charge to the positive charge.

The dipole moment is

[tex]p = q L\\\\p = 0.5 \times 10^{-9}\times 0.9\\\\p = 4.5\times 10^{-10} Cm[/tex]

Answer:

how to solve this problem ???????

The magnitude of the resultant force is 919.6 N and the value of angle θ is 36.87⁰.

The resultant of the two forces is determined by resolving the force into x and y component as shown below;

[tex]F_1_x + F_2x_x = F_R_x \ --- (1) \\\\F_1_y + F_2_y = F_R_y\ ---(2)[/tex]

where;

The value of Angle θ is determined from equation (1)

-500sinθ + 600sin(30) = 0

500sinθ = 600sin(30)

500sinθ = 300

sinθ = 3/5

θ = 36.87⁰

The resultant of the forces is determined using the second equation;

500cosθ + 600cos(30) = R

500 x cos(36.87) + 600 x cos(30) = R

919.6 N = R

Learn more about resultant forces here: https://brainly.com/question/25239010

Answer:

Explanation: