fully oxygenated waters contain as much as ___________ ppm oxygen.

The removal of each additional electron requires more energy than the removal of the previous one due to the increased attraction between the positively charged nucleus and the remaining negatively charged electrons.

The ionization energy is the energy required to remove an electron from an atom or ion. It is influenced by factors such as the atomic structure and electron configuration.
When an electron is removed from an atom, the ionization energy increases because the positive charge of the nucleus becomes stronger and holds the remaining electrons more tightly. This means that more energy is needed to overcome the increased attraction between the positively charged nucleus and the negatively charged electron.

In this case, the ionization energies for the removal of the third, fourth, and fifth electrons are given as 4581 kj/mol, 7465 kj/mol, and 9391 kj/mol, respectively.
The trend is that the ionization energies increase as we remove each additional electron. This is because as more electrons are removed, the positive charge of the nucleus becomes more pronounced and the remaining electrons are held even more tightly.T

As each additional electron is removed, more energy is required compared to the removal of the previous electron. This is because the positively charged nucleus exerts a stronger attraction on the remaining negatively charged electrons, making it harder to overcome the increased electrostatic force and remove subsequent electrons.

Learn more about ionization energy: https://brainly.com/question/30831422

#SPJ11

The most likely place where an exoenzyme participates in a chemical reaction is outside of the cell.

Option E is correct.

Exoenzymes are enzymes that are synthesized and secreted by cells to act on substrates outside of the cell that produced them. These enzymes are typically involved in extracellular processes, such as breaking down large molecules into smaller ones, digesting nutrients, or facilitating interactions with the environment.

Therefore, the correct answer is E. outside of the cell.

Learn more about Enzymes:

brainly.com/question/30667574

#SPJ11

A thermometer is an instrument used to measure the average kinetic energy in a substance.

The average kinetic energy of particles in a substance is directly related to its temperature. The higher the temperature, the greater the average kinetic energy of the particles, and vice versa. Thermometers are designed to measure this average kinetic energy and provide a numerical value known as temperature.

Most thermometers operate based on the principle of thermal expansion. They use a temperature-sensitive material, such as mercury or alcohol, enclosed in a narrow, sealed tube. As the temperature changes, the substance inside the tube expands or contracts, causing the level of the substance to rise or fall.

A common example is a mercury-in-glass thermometer. It consists of a glass tube with a small bulb at the bottom filled with mercury. As the temperature increases, the thermal energy causes the mercury to expand, and it rises the tube.

So, a thermometer is used to measure the average kinetic energy in a substance by detecting and quantifying its temperature.

Learn more about temperature here:

https://brainly.com/question/33230800

#SPJ11

Agar is a complex polysaccharide derived from a seaweed.

Agar is a jelly-like substance that is used to culture bacteria and other microbes in the laboratory. It is a non-nutrient material that is used to provide a surface for the bacteria to grow on.

Agar is also used as a gelling agent in foods such as jams and jellies, as well as in the preparation of solid media for microbiological applications.

The structure of agar is composed of repeating units of galactose and 3,6-anhydrogalactose, linked together by glycosidic bonds.

It is a linear polymer of approximately 150 kDa.

Agar is a hydrophilic molecule, meaning that it attracts water molecules, which contributes to its ability to form gels.

learn more about complex polysaccharide on

https://brainly.com/question/33536825

#SPJ11

Organic Chemistry is the study of covalent compounds of Carbon and Hydrogen (Hydrocarbon) and their derivatives.

Inorganic Chemistry is the study of all elements and their compounds expect those of compounds of Carbon and Hydrogen (Hydrocarbon) and their derivatives.

The acid H3PO4 can donate three hydrogen ions (H+) per molecule.

Thus, the number of H+ ions that the acid H3PO4 can donate per molecule is 3.Explanation:H3PO4 is also known as phosphoric acid. Phosphoric acid is an inorganic mineral acid that is commonly used in fertilizers, detergents, and food additives.

The chemical formula of H3PO4 is H3PO4 which implies that it has three hydrogen ions that are attached to the phosphate anion.Each hydrogen ion, which is donated by H3PO4, has the ability to donate a single positive hydrogen ion or proton (H+).

Therefore, since H3PO4 has three hydrogen ions, it has the ability to donate three H+ ions per molecule (per H3PO4 molecule).

In other words, one molecule of H3PO4 can donate three hydrogen ions.

Therefore, the number of H+ ions that the acid H3PO4 can donate per molecule is 3.

Learn more about hydrogen ions in the link:

https://brainly.com/question/29033205

#SPJ11

The most controversial form of alternative energy after nuclear power is: Fossil fuel.

Energy is the capability of doing work, and it comes in various forms. For example, mechanical energy is a form of energy that arises from the motion or location of an object, while thermal energy is the energy associated with the movement of atoms or molecules within a substance.

There are two types of energy: kinetic energy and potential energy.

Power refers to the amount of energy used in a given time period. In other words, power is the rate at which work is done. Energy is expressed in joules, while power is expressed in watts.

Power is calculated by dividing the amount of energy used by the amount of time it took to use it.

learn more about alternative energy  on

https://brainly.com/question/27263084

#SPJ11

Explanation:

cooked rice

nutrient

carbohydrate.

Boiler eggs

nutrient

Protein.

This is because, CH4 is a chemical formula for methane. The correct answer is option D) CH4.

Compounds are pure substances that are made up of two or more different types of atoms that are chemically combined in fixed proportions. They are represented by a chemical formula that shows the elements present in the compound and their relative proportions.
                                        H2, Cl2, and O2 are all examples of elements that are made up of atoms of a single type. These are also called diatomic molecules. In H2, Cl2 and O2, two atoms of the same element are chemically combined.

H2 represents hydrogen gas, Cl2 represents chlorine gas, and O2 represents oxygen gas. They cannot be classified as compounds because they are not made up of two or more different types of atoms that are chemically combined.

CH4 represents methane, which is a compound because it is made up of two different types of atoms (carbon and hydrogen) that are chemically combined. It is a simple organic compound that belongs to the alkane series of hydrocarbons.

The chemical formula for methane is CH4, which indicates that it contains one atom of carbon and four atoms of hydrogen. Methane is a colorless, odorless gas that is highly flammable and used as a fuel for heating and cooking.

Lean more about diatomic molecules

brainly.com/question/1433575

#SPJ11

Based on the information provided, the principle of the conservation of mass did apply in this example.

The principle of the conservation of mass states that mass is neither created nor destroyed in a chemical reaction. In other words, the total mass of the reactants should be equal to the total mass of the products.

In the given scenario, Nicole measured 25 g of sodium carbonate and 10 mL of vinegar, which can be considered the reactants. The total mass of the reactants and the beaker was determined to be 100 g. After mixing the reactants, bubbling and a white residue were observed, and the total mass became 98 g.

To analyze the conservation of mass, we need to consider the mass of the products formed. The bubbling and white residue suggest a chemical reaction occurred, likely resulting in the formation of a gas and a solid product. Although the exact reaction and products are not specified, it is evident that some change took place.

The total mass decreasing from 100 g to 98 g indicates that the mass of the products is less than the mass of the reactants and the beaker. This might be due to the formation of a gas that escaped from the reaction mixture.

While the total mass decreased, it is important to note that mass was not created or destroyed. The lost mass in the form of the escaping gas can be accounted for if it is considered separately.

For more such questions conservation visit:

https://brainly.com/question/19162396

#SPJ8

Horus, the god of the sky, was one of the most significant deities in ancient Egypt. The pharaoh was believed to be the personification of Horus on earth.

Horus was one of the most ancient and vital deities in the Egyptian religion. He was known as the god of the sky and, later on, the god of war and hunting. Horus was often depicted as a falcon or a human figure with a falcon's head. In ancient Egyptian society, the pharaoh was considered the most powerful and divine person. The pharaoh was believed to be the living Horus and the son of Osiris and Isis.

The Egyptian king was considered Horus on earth, and he was tasked with maintaining order and stability throughout the kingdom. Horus was considered the patron god of the pharaohs, and many of them were named after him. The Egyptians believed that the pharaoh was responsible for maintaining Ma'at, the divine order of the universe. The king was believed to be the mediator between the gods and the people and was responsible for ensuring that the gods were pleased with their offerings.

Learn more about deities here:

https://brainly.com/question/31871249

#SPJ11

The Keq (Equilibrium constant) of the reaction 14C (l) ⇌ 4A (g) + 6B (s) is 6.64.

Chemical equilibrium refers to the state of a system in which the concentration of the reactant and the concentration of the products do not change with time, and the system does not display any further change in properties.

It is the state of a reversible reaction where the rate of the forward reaction equals the rate of the reverse reaction. While a reaction is in equilibrium the concentration of the reactants and products are constant.

The given reaction can be represented as:

2A (g) + 3B (s) ⇌ 7C (l)

the stoichiometric coefficients are 2, 3, and 7 for A, B, and C, respectively.

Keq = ([C]⁷) / ([A]² [B]³)

To find the Keq of the second reaction, we can rearrange the equation and substitute the stoichiometric coefficients:

Keq' = ([A]⁴  [B]⁶) / [C]¹⁴

Keq' = (0.38² . 0.38³) / 0.38⁷

Keq' = 0.38⁻² = 6.64

Learn more about Chemical equilibrium, here:

https://brainly.com/question/4289021

#SPJ4

The average kinetic energy of the particles in a gas is proportional to the temperature of the substance. The option that correctly identifies the average kinetic energy of the particles in a gas is C.

In thermodynamics, the kinetic theory of gases is an essential concept. It's a branch of the study of heat and temperature in physics that deals with the movement of gas molecules. The average kinetic energy of the particles in a gas is determined by the substance's temperature. The kinetic energy of an object is proportional to its temperature.

When the temperature of a substance rises, the kinetic energy of the molecules increases, and when it decreases, the kinetic energy of the molecules decreases. The pressure, temperature, and volume of a gas are all related through the kinetic theory of gases. The kinetic theory of gases is the fundamental idea behind the ideal gas law, which is a relationship between the pressure, temperature, and volume of a gas.

Learn more about gases here:

https://brainly.com/question/29665974

#SPJ11

Complete question is:

The average kinetic energy of the particles in a gas

A. is not affected by the temperature of the substance.

B. increases as the temperature of the substance decreases.

C. is proportional to the temperature of the substance.

D. is equal to the total thermal energy absorbed by the substance.

The systematic name for the compound Al(NO₃)₃ is Aluminum nitrate.

Aluminum (Al) has a valency of +3, whereas Nitrate (NO₃) has a valency of -1.

Aluminum nitrate is a salt composed of aluminum and nitrate ions with the chemical formula Al(NO₃)₃.

Al(NO₃)₃ is an ionic compound that is highly soluble in water, making it an excellent starting material for the preparation of other salts.

Aluminum nitrate can be obtained by dissolving aluminum hydroxide in nitric acid.

A white crystalline solid is formed when the solution is concentrated by evaporation.

The crystals are hygroscopic and dissolve in water to produce a colorless solution.\

learn more about  Aluminum nitrate on

https://brainly.com/question/9317790

#SPJ11

The chemical equation for the reaction between hydrogen gas and nitrogen to form ammonia is 3H₂ + N₂ → 2NH₃.

To balance the equation, we need to ensure that the same number of atoms of each element is present on both sides of the equation. In this case, we have three hydrogen atoms on the left side and six hydrogen atoms on the right side.
To balance the hydrogen atoms, we can place a coefficient of 2 in front of the hydrogen gas:

3H₂ + N₂ → 2NH₃

Now, we have six hydrogen atoms on both sides. Next, we need to balance the nitrogen atoms. We have one nitrogen molecule on the left side and two nitrogen atoms in total on the right side.

To balance the nitrogen atoms, we can place a coefficient of 2 in front of the nitrogen molecule. 3H₂ + 2N₂ → 2NH₃

Now, we have six hydrogen atoms and four nitrogen atoms on both sides of the equation. The equation is balanced.

Learn more about balanced chemical equations here:

brainly.com/question/28294176

#SPJ11

Oxygen plays a crucial role in energy-yielding pathways by serving as the final electron acceptor in the electron transport chain (ETC) during cellular respiration.

Oxygen is the most important factor in energy-yielding pathways. The oxygen molecule is the final acceptor of electrons in cellular respiration, which is the process of energy production in cells. When electrons are passed down the electron transport chain, they lose energy, which is then used to pump hydrogen ions (protons) out of the mitochondrial matrix. This creates a concentration gradient of hydrogen ions, which then flow back into the matrix through ATP synthase.

The flow of hydrogen ions back into the matrix releases energy that is used to produce ATP from ADP and inorganic phosphate. Oxygen, as the final electron acceptor, is essential for this process because it helps to maintain the electron transport chain by accepting the electrons at the end of the process and allowing the cycle to continue. In summary, oxygen's role in energy-yielding pathways is crucial for the production of ATP, the main source of energy for cellular processes.

Learn more about cellular respiration here:

https://brainly.com/question/32872970

#SPJ11

The solution that contains the most solute particles per liter is 1 M Mg(NO₃)₂. The correct answer is option (b).


The solute particles in a solution can be ions or molecules. The number of solute particles per unit of volume is a measure of concentration and is expressed in mol/L or M. In the given options, 1 M KBr, 1 M Mg(NO₃)₂, 4 M ethanol, and 4 M acetic acid are given.  

The concentration of the solutions can be calculated using the formula:

Molarity (M) = Number of moles of solute / Volume of solution in liters

The number of solute particles per unit of volume is directly proportional to molarity. The solution with the highest molarity will have the most solute particles per liter.  

Therefore, the solution that contains the most solute particles per liter is 1 M Mg(NO₃)₂. The number of solute particles per liter of 1 M Mg(NO₃)₂ will be 3 times greater than 1 M KBr, and 2 times greater than 4 M ethanol or 4 M acetic acid.

Thus, the solution that contains the most solute particles per liter is 1 M Mg(NO₃)₂. The correct answer is option (b).

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ11

The term used to denote the concentration of electrolytes in a given volume is "molarity".

Molarity-

Molarity is the number of moles of solute dissolved in one liter of the solution. Molarity is the most widely used concentration metric in chemistry, and it is frequently denoted by "M." It denotes the amount of solute in moles per liter of solution.

A solution's molarity can be calculated using the following formula:

Molarity = moles of solute / liters of solution

Molarity is often used to express the concentration of a solution's electrolytes because electrolytes break into ions when dissolved in a solvent, allowing for electrical conductivity.

Molarity can be used in other applications, such as stoichiometry, which involves determining how much of one compound is required to react completely with another.

Molarity is a useful tool for solving problems that involve chemical reactions since the number of moles of a substance is frequently used to establish reaction ratios, limit reactants, and determine the theoretical yield.

Learn more about the molarity from the given link-

https://brainly.com/question/30404105

#SPJ11

The process used to mine salts by filling shallow ponds with seawater is known as solar salt production.

The process of mining salts by filling shallow ponds with seawater is called solar salt production. It is a method commonly used to extract salt from seawater on a large scale. The process takes advantage of the natural evaporation of water under the sun, leaving behind concentrated salt crystals that can be collected and processed.

The process begins by selecting suitable coastal areas or salt flats, typically in arid or semi-arid regions with access to the sea. These areas are usually flat and have low rainfall, facilitating the evaporation process. Shallow ponds or basins, also known as salt pans or evaporation ponds, are constructed to contain the seawater.

Seawater is then pumped into these ponds or is allowed to flow in naturally during high tide. The ponds are designed to maximize the exposure of seawater to sunlight and heat. The sun's energy drives the evaporation process, causing the water to gradually evaporate, leaving behind concentrated brine solutions.

Over time, as the water continues to evaporate, the salt concentration in the remaining brine increases. The concentrated brine, also known as bittern, becomes supersaturated with dissolved salts, including sodium chloride and other minerals. As the saturation point is reached, salt crystals begin to precipitate and form salt beds at the bottom of the ponds.

Learn more about evaporation here:

https://brainly.com/question/33571997

#SPJ11

The amount of energy required to decompose 765g of PCl₃ is 887.7 kJ calculated by using the formula: Q = m × ∆H.


To calculate the amount of energy required to decompose 765g of PCl₃, we need to find the enthalpy change (∆H) of the reaction. According to the balanced equation, 1 mole of PCl₃ decomposes to form 1 mole of PCl₅ and 1 mole of Cl₂. The enthalpy change for this reaction can be found using Hess's Law or from the enthalpy of formation values of the reactants and products.

The enthalpy change of the reaction is ∆H = ∆Hf(PCl₅) + ∆Hf(Cl₂) - ∆Hf(PCl₃)

Substituting the values, we get: ∆H = (-128.2) + (0) - (-287.5) = 159.3 kJ/mol

Now, we can use the formula Q = m × ∆H to calculate the amount of energy required to decompose 765g of PCl₃.

Number of moles of PCl₃ = 765/137.33 = 5.57 mol

Amount of energy required = 5.57 mol × 159.3 kJ/mol = 887.7 kJ

Therefore, the amount of energy required to decompose 765g of PCl₃ is 887.7 kJ.

Learn more about Hess's Law here:

https://brainly.com/question/10504932

#SPJ11

Temperature and fluidity of the cell membrane are directly proportional to each other. As temperature increases, the fluidity of the cell membrane also increases.

The plasma membrane of the cell is a thin, flexible layer that encloses all cells, and it is also known as the cell membrane. It serves as a barrier to separate the cell's contents from the external environment. Fluidity of the cell membrane refers to the movement of lipid molecules within the cell membrane. Temperature and fluidity of the cell membrane are directly proportional to each other.

As temperature increases, the fluidity of the cell membrane also increases, and vice versa. The fluidity of the cell membrane is essential for the functioning of membrane-bound proteins, which play an essential role in various cellular activities, such as cell signaling, transport of molecules, and cell recognition. Therefore, temperature directly affects the fluidity of the cell membrane, which can impact cellular activities and the survival of the organism.

Learn more about cell membrane here:

https://brainly.com/question/13049297

#SPJ11

The mass of 12.82 moles of lithium (Li) atoms is 88.89 g.

The molar mass of Lithium (Li) is 6.94 g/mol. Therefore, the mass of 12.82 moles of lithium (Li) atoms can be calculated as follows:

The number of moles of lithium (Li) = 12.82 mol

Molar mass of Lithium (Li) = 6.94 g/mol

We know that the mass of one mole of an element is equal to its atomic or molecular mass in grams.Therefore, the mass of 1 mole of Li atoms is equal to its molar mass which is 6.94 g/mol.

Then the mass of 12.82 moles of Li atoms can be found using mole to mass conversion as follows:

Mass = Number of moles × Molar mass

= 12.82 mol × 6.94 g/mol

= 88.89 g.

Learn more about molar mass -

brainly.com/question/837939

#SPJ11

The element that is expected to form diatomic molecules is d. hydrogen (H).

Diatomic molecules are molecules composed of two atoms of the same element bonded together. They are stable configurations for certain elements under normal conditions. Hydrogen is a diatomic element, meaning it naturally exists as H, with two hydrogen atoms bonded together.

On the other hand, the other options do not typically form diatomic molecules under normal conditions.

- Sulphur (S) is an element that exists as S8, forming octatomic molecules made up of eight sulphur atoms bonded together.

- Argon (Ar) is a noble gas and exists as single atoms. Noble gases are generally non-reactive and do not form diatomic molecules.

- Helium (He) is also a noble gas and exists as single atoms. Like other noble gases, helium does not readily form diatomic molecules.

Therefore, among the given options, hydrogen (H) is the element that is expected to form diatomic molecules.

To know more about Argon

brainly.com/question/12032224

#SPJ11

Given the equation `x² + 2x + y² + 4y = 20`, complete the square to rewrite it and identify the centers and radius of the circle. The answer to the question is
Completing the square:
[x^2 + 2x + y^2 + 4y = 20\]\[x^2 + 2x + 1 - 1 + y^2 + 4y + 4 - 4 = 20\]\[(x + 1)^2 + (y + 2)^2 = 25\]
This equation is in the standard form of a circle, that is:
[(x - h)^2 + (y - k)^2 = r^2\]
where `(h, k)` is the center of the circle and `r` is its radius.
The equation of the given circle is \[(x + 1)^2 + (y + 2)^2 = 5^2\].
Therefore, the center of the circle is `(-1, -2)` and its radius is `5`.

We are given the equation x² + 2x + y² + 4y = 20 and we need to complete the square to rewrite the equation and identify the center and radius of the circle. We know that the standard form of a circle is (x - h)² + (y - k)² = r².
To transform the equation into the standard form of the circle, we need to complete the square. We can complete the square by adding and subtracting (1 + 4) on the left-hand side of the equation, which is equal to adding and subtracting 5 (5 is half of the coefficient of y) on the right-hand side of the equation.
This gives us:(x² + 2x + 1) - 1 + (y² + 4y + 4) - 4 = 20 + 5 - 5(x + 1)² + (y + 2)² = 25
This simplifies to:(x + 1)² + (y + 2)² = 5², which is in the standard form of a circle.
Therefore, the center of the circle is (-1, -2) and its radius is 5.

In conclusion, we have found that the equation of the given circle is (x + 1)² + (y + 2)² = 5². We have also found that the center of the circle is (-1, -2) an;

to know more about circle visit:

brainly.com/question/12930236

#SPJ11

The common name of the following compound CH₃CH₂OCH₃ is ethyl methyl ether.

Ethyl methyl ether, commonly known as ethyl methyl ether, is a colorless, flammable gas with a mild odor. It is an ether composed of two carbon atoms in a row (ethane), an oxygen atom connected to one of them, and a methyl (CH₃) group linked to the other.

The chemical formula for ethyl methyl ether is CH₃CH₂OCH₃. The IUPAC name for ethyl methyl ether is ethoxyethane, but it is more often referred to by its common name. It is used in a variety of industrial and laboratory applications, such as as a solvent for cellulose, resins, and oils, as well as a refrigerant and a local anesthetic.

Learn more about ethoxyethane here:

https://brainly.com/question/33427233

#SPJ11

Hexane would have the fragment 57 in its mass spectrum and the correct option is option C.

A mass spectrum is  the m/z ratios of the ions present in a sample plotted against their intensities. Each peak in a mass spectrum indicates a component of unique m/z in the sample, and heights of the peaks give information about the relative abundance of the various components in the sample.

This fragment could arise from the loss of a methyl group (CH₃) from the hexane molecule, resulting in the fragment with the formula C₅H₁₁. The m/z value represents the ratio of the fragment's mass to its charge, so it does not necessarily correspond to the exact mass of the fragment.

Thus, the ideal selection is option C.

Learn more about Mass spectrum, here:

https://brainly.com/question/31040502

#SPJ4

The well-known ports range from 0 to 1023. These ports are reserved for specific services and protocols, and they are commonly used by system processes or by programs executed by privileged users.

Here is a breakdown of some commonly known ports within the well-known port range:

20: FTP Data

21: FTP Control

22: SSH (Secure Shell)

23: Telnet

25: SMTP (Simple Mail Transfer Protocol)

53: DNS (Domain Name System)

80: HTTP (Hypertext Transfer Protocol)

110: POP3 (Post Office Protocol version 3)

143: IMAP (Internet Message Access Protocol)

443: HTTPS (HTTP Secure)

465: SMTP over SSL/TLS

587: SMTP Submission

993: IMAPS (IMAP over SSL/TLS)

995: POP3S (POP3 over SSL/TLS)

These are just a few examples, and there are many other services and protocols assigned to specific well-known ports within the range of 0 to 1023.

Learn more about Range:

brainly.com/question/29746356

#SPJ11

The pH of the resulting solution when 20.0 mL of 0.20 M HC₂H₂O₂and 20.0 mL of 0.10 M NaOH are mixed is 3.07.

Neutralization is a chemical reaction in which acid and base react to form salt and water. Hydrogen (H⁺) ions and hydroxide (OH⁻ ions) react with each other to form water.

The strong acid and strong base neutralization have a pH value of 7.

The balanced equation for the reaction is:

HC₂H₂O₂ + NaOH → NaC₂H₃O₂ + H₂O

Moles of HC₂H₂O₂= concentration × volume = 0.20 M × 0.020 L = 0.004 mol

Moles of NaOH = concentration × volume = 0.10 M × 0.020 L = 0.002 mol

Since HC₂H₂O₂ is a weak acid, it will partially dissociate in water according to the equation:

HC₂H₂O₂ ⇌ H⁺ + C₂H₂O₂⁻

Initial:

HC₂H₂O₂: 0.004 M

H⁺: 0 M

C₂H₂O₂⁻: 0 M

Change:

HC₂H₂O₂: -x M

H⁺: +x M

C₂H₂O₂⁻: +x M

Equilibrium:

HC₂H₂O₂: 0.004 - x M

H⁺: x M

C₂H₂O₂⁻: x M

Ka = [H⁺][ C₂H₂O₂⁻] / [HC₂H₂O₂]

1.8 x 10⁻⁵ = x × x / (0.004 - x)

Since x is small compared to 0.004, so 0.004 - x = 0.004:

1.8 x 10⁻⁵= x² / 0.004

x² = 1.8 x 10⁻⁵ × 0.004

x² = 7.2 x 10⁻⁸

x = 8.49 x 10⁻⁴ M = [H⁺]

pH = -log( 8.49 x 10⁻⁴)

pH = 3.07

Learn more about Neutralization, here:

https://brainly.com/question/14156911

#SPJ4

The normal boiling point for the substance in the given phase diagram is about 65°C.


The phase diagram is a graphical representation of the relationship between temperature and pressure of a substance under conditions of constant pressure. It represents how a substance changes from solid, liquid, and gas phases under varying conditions of pressure and temperature.

From the given phase diagram, we can see that the normal boiling point for the substance is approximately 65°C. The normal boiling point is the temperature at which a substance boils at standard pressure of 1 atm. At this temperature, the vapor pressure of the substance is equal to the atmospheric pressure of 1 atm.

Hence, we can conclude that the normal boiling point for the given substance is approximately 65°C based on the phase diagram provided.

Learn more about boiling point here:

https://brainly.com/question/1514229

#SPJ11

C4 plants are named so because they utilize a four-carbon molecule, oxaloacetate, as their first carbon molecule. C4 plants are special types of plants that have evolved to use a highly efficient carbon fixation pathway in order to maintain their photosynthetic rates in hot, arid environments where water is scarce.

C4 plants have specific adaptations that enable them to thrive in such environments. For example, they have thick waxy leaves to reduce water loss, and they use PEP carboxylase to fix CO2 into a four-carbon molecule that is then transported to bundle sheath cells for further processing in a specialized process.

Additionally, C4 plants have a unique arrangement of photosynthetic cells that minimizes photorespiration and allows them to maintain high photosynthetic rates at higher temperatures and under drought conditions. These plants are commonly found in hot, dry climates and are typically grasses, but include some crops such as corn, sugar cane, and sorghum.

To know more about photosynthetic visit-

https://brainly.com/question/26561399

#SPJ11