g A small object of mass 2.5 g and charge 18 uC is suspended motionless above the ground when immersed in a uniform electric field perpendicular to the ground. What is the magnitude and direction of the electric field

Answer:

4.926 L Y 7.389 L

Explanation:

first you calculate the tank volume

V = π[tex](14 cm)^{2}[/tex](10 cm = [tex]12315 cm^{3}[/tex]

then you convert to liters

[tex]12315 cm^{3}[/tex] = 12.315 l

then you calculate the liters of water

2/5(12.35 l) = 4.926 l

finally we calculate the amount without water

12.315 l - 4.926 l = 7.389 l

HERE IS MORE INFORMATION ON THE SUBJECT. THEY REMOVED THE

ENGLISH SITE BUT YOU CAN USE TRANSLATOR

LINK: https://gscourses.thinkific.com/courses/fisicai

Answer: When a pathogen enters their colony, ants change their behavior to avoid the outbreak of disease. In this way, they protect the queen, brood and young workers from becoming ill. These results, from a study carried out in collaboration between the groups of Sylvia Cremer at the Institute of Science and Technology Austria (IST Austria) and of Laurent Keller at the University of Lausanne, are published today in the journal Science.

Explanation: search for it.

Answer:

A denser object will usually have a high index of

refraction.

A denser object will usually have a high index of refraction.

The refractive index is the ratio of the speed of light in vacuum and speed of light in any medium.

n = c/v

The density is greater for the denser medium (water, oil, mercury, etc) then the rarer medium (any gas or air).

When a light ray travels through denser medium, its velocity is reduced and the refracted ray bends towards normal.

As, the index of refraction is inversely proportional to the velocity of light in the medium, index of refraction will be high for denser object.

Thus, denser object have high index of refraction.

Learn more about index of refraction.

https://brainly.com/question/23750645

#SPJ2

[tex]Hello[/tex] [tex]There![/tex]

[tex]AnimeVines[/tex] [tex]is[/tex] [tex]here![/tex]

The answer is...

C. Work and time.

[tex]HopeThisHelps!![/tex]

[tex]AnimeVines[/tex]

Answer: [tex]P=5573.43\ W[/tex]

Explanation:

Given

Mass of the elevator is [tex]M=650\ kg\\\[/tex]

Time period of ascension [tex]t=3\ s[/tex]

cruising speed [tex]v=1.75\ m/s[/tex]

Distance moved by elevator during this time

Suppose Elevator starts from rest

[tex]\Rightarrow v=u+at\\\Rightarrow 1.75=0+a(3)\\\Rightarrow a=0.583\ s[/tex]

Distance moved

[tex]\Rightarrow h=ut+0.5at^2\\\Rightarrow h=0+0.5\times 0.5833\times (3)^2\\\Rightarrow h=2.62\ m[/tex]

Gain in Potential Energy is

[tex]\Rightarrow E=mgh\\\Rightarrow E=650\times 9.8\times 2.62\\\Rightarrow E=16,720.3\ N[/tex]

Average power during this period is

[tex]\Rightarrow P=\dfrac{E}{t}\\\\\Rightarrow P=\dfrac{16,720.3}{3}\\\\\Rightarrow P=5573.43\ W[/tex]

Answer:

The power is 331.7 W.

Explanation:

mass, m = 650 kg

time, t= 3 s

initial  velocity,  u = 0 m/s

final velocity, v = 1.75 m/s

(a) The power is defined as the rate of doing work.

Work is given by the change in kinetic energy.

W = 0.5 m (V^2 - u^2)

W = 0.5 x 650 x 1.75 x 1.75 =  995.3 J

The power is given by

P = W/t = 995.3/3 = 331.7 W

Answer:

B

Explanation:

ABSORPTION

Answer:

Explanation:

From the question we are told that:

Number of turns [tex]N=10[/tex]

Area [tex]a=0.23m^2[/tex]

Magnetic field [tex]B=0.947T[/tex]

Generally the equation for maximum flux is mathematically given by

 [tex]\phi=NBa[/tex]

 [tex]\phi=10*0.047*0.23[/tex]

 [tex]\phi=0.1081wbi[/tex]

Therefore induced emf

 [tex]e= \frac{d\phi}{dt}[/tex]

Since

 [tex]t=0[/tex]

Therefore

 [tex]e=0[/tex]

Answer:

The car will make the turn perfectly

Explanation:

Given that the centripetal force= mv^2/r

M= mass of the car

v = speed of the car

r= radius

Hence;

F = 1000 × (14)^2/50

F= 3920 N

The frictional force = μmg

μ = coefficient of static friction

m= mass

g = acceleration due to gravity

Frictional force= 0.6 × 1000× 10

Frictional force = 6000 N

The car will not skid off the curve because the frictional force is greater than the centripetal force.

Answer:

The correct option is (e) "none of the above".

Explanation:

Given that,

A small object with mass 0.20 kg swings as a pendulum on the end of a long light rope. For small amplitude of swing, the period of the motion is 3.0 s.

If the object is replaced by one with mass 0.400 kg, then we have to find the period for small amplitude of the swing.

We know that the time period can be calculated as :

[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

Where

l is the length

g is acceleration due to gravity

It means the time period is independent of the mass. So, if the mass is replaced by one with mass 0.400 kg, there is no effect on the time period.

Answer:

a. Total displacement = 140 km/h

b. Average velocity = 35 km/h

Explanation:

Given the following data;

Average velocity A = 80 km/h

Time A = 2.5 hours

Average velocity B = 40 km/h

Time B = 1.5 hours

a. To find the total displacement for the 4 h trip;

Total time = Time A + Time B

Total time = 2.5 + 1.5

Total time = 4 hours

Next, we would determine the displacement at each velocity.

Mathematically, displacement is given by the formula;

Displacement = velocity * time

Substituting into the formula, we have;

Displacement A = 80 * 2.5

Displacement A = 200 km/h

Displacement B = 40 * 1.5

Displacement B = 60 km/h

Total displacement = Displacement A - Displacement B

Total displacement = 200 - 60

Total displacement = 140 km/h

b. To find the average velocity for the total trip;

Mathematically, the average velocity of an object is given by the formula;

[tex] Average \; velocity = \frac {total \; displacement}{total \; time} [/tex]

Substituting into the formula, we have;

[tex] Average \; velocity = \frac {140}{4} [/tex]

Average velocity = 35 km/h

Answer:

(a) the velocity of the shirt is 2.14 m/s

(b) the velocity of the shirt is 5.3 m/s

Explanation:

Given;

initial velocity of the shirt, u = 5.3 m/s

height of the platform above the ground, h = 4.00 m

(a) When the shirt is caught by someone whose hand is 5.20 m from the ground level, the height traveled by the shirt = 5.2 m - 4.0 m = 1.2 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 1.2)\\\\v^2 = 4.57\\\\v= \sqrt{4.57} \\\\v = 2.14 \ m/s[/tex]

(b) When the shirt is caught by someone whose hand is 4.00 m from the ground level, the height traveled by the shirt = 4.00 m - 4.00 m = 0 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 0)\\\\v^2 = 28.09\\\\v= \sqrt{28.09} \\\\v = 5.3 \ m/s[/tex]

Answer:

 E = [tex]\frac{Q}{L^2 \epsilon_o}[/tex]

Explanation:

For this exercise we use that the electric field is a vector, so the resulting field is

          E_total = E₁ + E₂                      (1)

since the field has the same direction in the space between the planes

Let's use Gauss's law for the electric field of each plate

Let's use a Gaussian surface that is a cylinder with the base parallel to the plate, therefore the normal to the surface and the field lines are parallel and the angle is zero so cos 0 = 1

          Ф  = ∫ .dA = [tex]q_{int}[/tex] /ε₀

if we assume that the charge is uniformly distributed on the plate we can define a charge density

         σ = q_{int} A

as the field exists on both sides of the plate on the inside

          E A = A σ / 2ε₀

          E = σ / 2ε₀

we substitute in equation 1

         E = σ /ε₀

for the complete plate

         σ = Q / A = Q / L²

we substitute

         E = [tex]\frac{Q}{L^2 \epsilon_o}[/tex]

Answer:

none of those are right, its technically 96.5%. so i would say 97% is your best bet because thats closest and it just rounds up :)

Explanation:

Answer:

Weight, acceleration when it falls vertically, are not same as that of earth.

Explanation:

Weight of the object is given by the product of mass of the object and the acceleration due to gravity of the planet.

So, the weight of object is not same as that on earth.

The mass is defined as the amount of matter contained in the object.

So, the mass of the object is same as that of earth.  

The volume of the object is defined as the space occupied by the object.

So, the volume of the object is same as that of earth.  

The density is defined as the ratio of mass of the object to its volume.

So, the density of the object is same as that of earth.  

The acceleration due to gravity on a planet depends on the mass of planet and radius of planet.

So, the acceleration is not same as that of earth.

The color of the object is its characteristic.

It is same as that of earth.

In the historical sense, postmodern society is simply a society that occurs after the modern society. ... Many of the elements of a society like this are reactions to what the modern society stood for: industrialism, rapid urban expansion, and rejection of many past principles.

Answer:

The electric potential energy is 6.72 x 10^-11 J.

Explanation:

Potential difference, V = 4.2 x 10^8 V

charge of electron, q = - 1.6 x 10^-19 C

Let the potential energy is U.

U = q V

U = 1.6 x 10^-19 x 4.2 x 10^8

U = 6.72 x 10^-11 J

Answer:

the resulting temperature is 23.37 ⁰C

Explanation:

Given;

mass of the iron, m₁ = 80 g = 0.08 kg

mass of the water, m₂ = 200 g = 0.2 kg

mass of the iron vessel, m₃ = 50 g = 0.05 kg

initial temperature of the iron, t₁ = 100 ⁰C

initial temperature of the water, t₂ = 20 ⁰C

specific heat capacity of iron, c₁ = 462 J/kg⁰C

specific heat capacity of water, c₂ = 4,200 J/kg⁰C

let the temperature of the resulting mixture = T

Apply the principle of conservation of energy;

heat lost by the hot iron = heat gained by the water

[tex]m_1c_1 \Delta t_1 = m_2c_2\Delta t_2\\\\m_1c_1 (100 - T) = m_2c_2 (T- 20)\\\\0.08 \times 462 (100-T) = 0.2 \times 4,200 (T-20)\\\\36.96 (100-T) = 840 (T-20) \\\\100 - T = 22.72 (T-20)\\\\100-T = 22.72 T - 454.4 \\\\554.4 = 23.72T\\\\T = \frac{554.4}{23.72} \\\\T = 23.37 \ ^0C[/tex]

Therefore, the resulting temperature is 23.37 ⁰C

Answer:

24 meters

Explanation:

Find the final velocity. 12m/s

d=[final-initial]/2×time

D=(6m/s)×4=24 m/s

Answer:

The right answer is "[tex]\frac{KQ}{r_b_2}[/tex]".

Explanation:

As the outer spherical shell is conducting, so there is no electric field in side from

⇒ [tex]r_b_1 < r < r_b_2[/tex].

So the electric potential at all points inside the conducting shell that from

⇒ [tex]r_b_1<r<r_b_2[/tex]  

and will be similar as well as equivalent to the potential on the outer surface of the shell that will be:

⇒ [tex]v=\frac{KQ}{r_b_2}[/tex]

Thus the above is the right solution.

Answer:

No

Explanation:

You could try to give it enough to fill all valence electrons in all of the atoms in the conductor, but practically this could not be achieved.

Answer:

Yes

Explanation:

A scientific theory is an explanation of a natural phenomenon based on available facts. If an Astrophysicist (a scientist who studies the universe and its celestial constituents) performs several successful experiments about a natural body like the sun and tests the results of his experiment using the principles of maths and physics and they come out as true, then he can propose a scientific theory based on his findings.

Unlike a scientific law that simply states a fact, a scientific theory provides evidence and explanation to support the facts.

Wave-D (the red one) has the smallest amplitude of the 4 waves on this graph.

Answer:

h> 2R

Explanation:

For this exercise let's use the conservation of energy relations

starting point. Before releasing the ball

       Em₀ = U = m g h

Final point. In the highest part of the loop

       Em_f = K + U = ½ m v² + ½ I w² + m g (2R)

where R is the radius of the curl, we are considering the ball as a point body.

      I = m R²

      v = w R

we substitute

       Em_f = ½ m v² + ½ m R² (v/R) ² + 2 m g R

       em_f = m v² + 2 m g R

Energy is conserved

       Emo = Em_f

       mgh = m v² + 2m g R

       h = v² / g + 2R

The lowest velocity that the ball can have at the top of the loop is v> 0

      h> 2R

Answer:

The spring constant of the spring is 10.3 N/m.

Explanation:

Given that,

Mass of a bungee jumper, m = 59 kg

The period of oscillation, T = 0.25 min = 15 sec

We need to find the spring constant of the bungee cord. We know that the period of oscillation is given by :

[tex]T=2\pi\sqrt{\dfrac{m}{k}}[/tex]

Where

k is the spring constant

[tex]T^2=4\pi^2\times \dfrac{m}{k}\\\\k=4\pi^2\times \dfrac{m}{T^2}\\\\k=4\pi^2\times \dfrac{59}{(15)^2}\\\\k=10.3\ N/m[/tex]

So, the spring constant of the spring is 10.3 N/m.

Answer:

Distance traveled = 3 * 10E8 * 17.2 * 10E-9 = 5.16 m

.81 / 3 * 10E8 = 2.7 * 10E-9    normal time thru glass

(20.8 - 17.2) * E10-9 = 3.6 * 10E-9   additional time due to glass

c tg = c n ta      where tg and ta are the times spent in glass and air

(Note you can also write Va = n Vg  or  D / ta = n D / tg)

n = tg / ta = 3.6 / 2.7 = 1.33 the index of refraction of the glass

Wavelength (air) = Wavelength (glass) * n

Wavelenght = 560 nm / 1.33 = 421 nm

Answer:

Current

I think The choose (B)

B. Electric current

Answer:

you should provide the options for us to answer?

Answer:

 f = v / 4L

the frequency of the instruments is reduced by the decrease in the speed of the wave with the temperature.

Explanation:

In wind instruments the wave speed must meet

          v = λ f

          λ = v / f

from v is the speed of sound that depends on the temperature

          v = v₀ [tex]\sqrt{1+ \frac{T [C]}{273} }[/tex]

where I saw the speed of sound at 0ºC v₀ = 331 m/s  the temperature is in degrees centigrade, we can take the degrees Fahrenheit to centigrade with the relation

            (F -32) 5/9 = C

            76ºF = 24.4ºC

            45ºF = 7.2ºC

With this relationship we can see that the speed of sound is significantly reduced when leaving the house to the outside

at T₁ = 24ºC               v₁ = 342.9 m / s

at T₂ = 7ºC                 v₂ = 339.7 m / s

To satisfy this speed the wavelength of the sound must be reduced, so the resonant frequencies change

              λ / 4 = L

              λ= 4L

              v / f = 4L

              f = v / 4L

Therefore, the frequency of the instruments is reduced by the decrease in the speed of the wave with the temperature.