Gaseous ammonia chemically reacts with oxygen gas to produce nitrogen monoxide gas and water vapor. Calculate the moles of nitrogen monoxide produced by the reaction of 1.5 moles of oxygen. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.

Answer:

a. 6mL of ethanol and 35mL of water: the solute is ethanol (smallest volume) and the solvent is water (greater volume).

b. 300 g of water containing 8g of NaHCO3: the solute is NaHCO3 (smallest mass) and the solvent is water (greater mass).

c. 0.005L of CO2 and 2L of O2: the solute is CO2 (smallest volume) and the solvent is O2 (greater volume).

Explanation:

Hello there!

In this case, according to the given problem, it turns out possible for us to solve these questions by bearing to mind the fact that in a solution, we can find two substances, solute and solvent, whereas the former is in a smaller proportion in comparison to the latter; in such a way, we infer the following:

a. 6mL of ethanol and 35mL of water: the solute is ethanol (smallest volume) and the solvent is water (greater volume).

b. 300 g of water containing 8g of NaHCO3: the solute is NaHCO3 (smallest mass) and the solvent is water (greater mass).

c. 0.005L of CO2 and 2L of O2: the solute is CO2 (smallest volume) and the solvent is O2 (greater volume).

Regards!

Answer: The pH of 0.10 M [tex]Cu(NO_{3})_{2}(aq)[/tex] is 4.49.

Explanation:

Given: Initial concentration of [tex]Cu(H_{2}O)^{2+}_{6}[/tex] = 0.10 M

[tex]K_{a} = 1.0 \times 10^{-8}[/tex]

Let us assume that amount of [tex]Cu(H_{2}O)^{2+}_{6}[/tex] dissociates is x. So, ICE table for dissociation of  [tex]Cu(H_{2}O)^{2+}_{6}[/tex]  is as follows.

                               [tex]Cu(H_{2}O)^{2+}_{6} \rightleftharpoons [Cu(H_{2}O)_{5}(OH)]^{+} + H_{3}O^{+}[/tex]

Initial:                       0.10 M                       0                       0

Change:                    -x                              +x                      +x

Equilibrium:           (0.10 - x) M                    x                        x

As the value of [tex]K_{a}[/tex] is very small. So, it is assumed that the compound will dissociate very less. Hence, x << 0.10 M.

And, (0.10 - x) will be approximately equal to 0.10 M.

The expression for [tex]K_{a}[/tex] value is as follows.

[tex]K_{a} = \frac{[Cu(H_{2}O)^{2+}_{6}][H_{3}O^{+}]}{[Cu(H_{2}O)^{2+}_{6}]}\\1.0 \times 10^{-8} = \frac{x \times x}{0.10}\\x = 3.2 \times 10^{-5}[/tex]

Hence, [tex][H_{3}O^{+}] = 3.2 \times 10^{-5}[/tex]

Formula to calculate pH is as follows.

[tex]pH = -log [H^{+}][/tex]

Substitute the values into above formula as follows.

[tex]pH = -log [H^{+}]\\= - log (3.2 \times 10^{-5})\\= 4.49[/tex]

Thus, we can conclude that the pH of 0.10 M [tex]Cu(NO_{3})_{2}(aq)[/tex] is 4.49.

Answer:

I do not speak Spanish.

Explanation:

Answer:

The partial pressure will be "100 torr".

Explanation:

Given:

[tex]P_{Ar} = 300 \ torr[/tex]

By assuming Ar and Ne having 50 gm each, we get

mol of Ne = [tex]\frac{50}{20}[/tex]

                = [tex]2.5 \ mol[/tex]

mol of Ar = [tex]\frac{50}{40}[/tex]

               = [tex]1.25 \ mol[/tex]

now,

[tex]n_T= mol.A_r+mol.N_e[/tex]

     [tex]=1.25+2.5[/tex]

     [tex]=3.75[/tex]

then,

[tex]X_{Ar}=\frac{n_{Ar}}{n_T}[/tex]

       [tex]=\frac{1.25}{3.75}[/tex]

       [tex]=0.33[/tex]

hence,

The partial pressure of Ar will be:

⇒ [tex]P_{Ar} = P_T\times X_{AT}[/tex]

By substituting the values, we get

           [tex]=300\times 0.33[/tex]

           [tex]=100 \ torr[/tex]

The partial pressure of Ar in the mixture is 99.9 torr

Let the mass of both gas be 10 g

Next, we shall determine mole of each gas.

Mass = 10 g

Molar mass of Ne = 20 g/mol

Mole = mass / molar mass

Mole of Ne = 10 / 20

Mass = 10 g

Molar mass of Ar = 40 g/mol

Mole = mass / molar mass

Mole of Ar = 10 / 40

Next, we shall determine the mole fraction of Ar

Mole of Ne = 0.5 mole

Mole of Ar = 0.25 mole

Total mole = 0.5 + 0.25 = 0.75 mole

[tex]mole \: fraction \: = \frac{mole}{total \: mole} \\ \\ mole \: fraction \: of \:Ar = \frac{0.25}{0.75} \\ \\ mole \: fraction \: of \:Ar = 0.333 \\ \\ [/tex]

Finally, we shall determine the partial pressure of Ar

Mole fraction of Ar = 0.333

Total pressure = 300 torr

Partial pressure = mole fraction × total pressure

Partial pressure of Ar = 0.333 × 300

Learn more on partial pressure: https://brainly.com/question/15577259

Answer:

Explanation:

Can you provide a picture? I can outline the reactions though. a) will make a Z double bond from a triple bond and then peroxyacid can do epoxidation. b) will make the Z double bond then ozonolysis to double bond will create to aldehyde compounds. c) is essentially useless unless there is a ketone or aldehyde in the compound already since H2/Pd will fully reduce the alkyne (which I am assuming is present) and so the peroxyacid can't do epoxidation and can only do baeyer villiger oxidation, and d) reduces the alkyne to an E alkene and then do epoxidation to give an epoxide (with trans steroechemistry)

Answer:

4.77mol is the correct answer

Answer:

a. increase.

Explanation:

Hello!

In this case, according to the given information, it turns out possible for us to tell that the common ion effect decreases the solubility of the ionic solid by firstly increasing the concentration of the common ion, which is further solved for the solubility in order to evidence the aforementioned decrease.

As an example, we can consider the solubility equilibrium for silver chloride:

[tex]Ksp=[Ag^+][Cl^-][/tex]

Which goes to:

[tex]Ksp=s^2[/tex]

Whereas s is the solubility to be solved for. However, when a silver- or chloride-containing solution is added, say 0.1 sodium chloride, the equilibrium expression changes to:

[tex]Ksp=(s)(s+0.1)[/tex]

Which turns out into a smaller value for s.

Regards!

Answer:

15.0 g

Explanation:

15.0% =0.150

100.0 g × 0.150= 15.0g

Sodium nitrate is "an inorganic compound with the formula of NaNO₃.

Inorganic compound is "a chemical compound that lacks carbon–hydrogen bonds".

15% = 0.15

100.0 g × 0.15= 15g

Hence, 15g of Sodium nitrate are needed to prepare 100 gms of a 15% by mass sodium nitrate.

To learn more about Sodium nitrate here

https://brainly.com/question/24256699

#SPJ2

Explanation:

Given the mass of HCl is ---- 0.50 g

The volume of solution is --- 4.0 L

To determine the pH of the resulting solution, follow the below-shown procedure:

1. Calculate the number of moles of HCl given by using the formula:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}[/tex]

2. Calculate the molarity of HCl.

3. Calculate pH of the solution using the formula:

[tex]pH=-log[H^+][/tex]

Since HCl is a strong acid, it undergoes complete ionization when dissolved in water.

[tex]HCl(aq)->H^+(aq)+Cl^-(aq)[/tex]

Thus, [tex][HCl]=[H^+][/tex]

Calculation:

1. Number of moles of HCl given:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}\\=0.50g/36.5g/mol\\=0.0137mol[/tex]

2. Concentration of HCl:

[tex]Molarity of HCl=\frac{number of moles of HCl}{its molar mass}\\=\frac{0.0137 mol}{4.0 L} \\= 0.003425 M[/tex]

3. pH of the solution:

[tex]pH=-log[H^+]\\=-log(0.003425)\\=2.47[/tex]

Hence, pH of the given solution is 2.47.

Answer:

true

Explanation:

Answer:

2 H₃PO₄(aq) + 3 Ba(OH)₂(aq) ⇒ Ba₃(PO₄)₂(s) + 6 H₂O(l)

Explanation:

Let's consider the unbalanced equation that occurs when phosphoric acid reacts with barium hydroxide to form water and barium phosphate. This is a neutralization reaction.

H₃PO₄(aq) + Ba(OH)₂(aq) ⇒ Ba₃(PO₄)₂(s) + H₂O(l)

We will balance it using the trial and error method.

First, we will balance Ba atoms by multiplying Ba(OH)₂ by 3 and P atoms by multiplying H₃PO₄ by 2.

2 H₃PO₄(aq) + 3 Ba(OH)₂(aq) ⇒ Ba₃(PO₄)₂(s) + H₂O(l)

Finally, we will get the balanced equation by multiplying H₂O by 6.

2 H₃PO₄(aq) + 3 Ba(OH)₂(aq) ⇒ Ba₃(PO₄)₂(s) + 6 H₂O(l)

Answer:

5.25 moles of protons. Option e

Explanation:

Reaction between phosphoric acid and sodium hydroxide is neutralization.

We can also say, we have an acid base equilibrium right here:

H₃PO₄  +  3NaOH →  Na₃PO₄  +  3H₂O

Initially we have 5.25 moles of base.

We have data from the acid, to state its moles:

M = mol/L, so mol = M . L

mol = 1.75 moles of acid

If we think in the acid we know:

H₃PO₄  →  3H⁺  +  PO₄⁻³

We know that 1 mol of acid can give 3 moles of protons (hydrogen ions)

If we have 1.75 moles of acid, we may have

(1.75 . 3) /1 = 5.25 moles of protons

These moles will be neutralized by the 5.25 moles of base

H₃O⁺  +  OH⁻  ⇄  2H₂O     Kw

In a titration of a weak acid and a strong base, we have a basic pH

Answer:

1. 1.00 gm

2. 50 ml

3. 38.93 ml

4. 11.07 ml

5. 0.01107 L

6. 0.010 moles / L

7. 0.0001107 moles

8. 0.0001107 moles

9. 0.00647042 grams

Explanation:

Silver nitrate can react with various compounds to form different products. The weight of products may be different from the original solution introduced due to combustion reaction, as heat energy is released during the chemical process.

Answer:

is a nonpolar molecule with polar bonds

Answer:

Oxidation half-reaction: 2 Fe (s) ----> 2 Fe³+ (aq) + 6e-

Reduction half-reaction: 3 Pb²+ (aq) + 6 e- ----> 3 Pb (s)

Explanation:

A redox reaction reaction is one in which oxidation and reduction occur simultaneously and to the same extent.

Oxidation involves a loss of electron, hence, a positive increase in the oxidation number of the atom or ion. The oxidation half-reaction is as follows:

2 Fe (s) ----> 2 Fe³+ (aq)

The metallic element iron, Fe , having an oxidation number of zero, loses three electrons to form the Fe³+ ion with a charge of +3. Since each atom loses three electrons each, The number of moles of electrons lost is six.

2 Fe (s) ----> 2 Fe³+ (aq) + 6e-

Reduction involves a gain of electrons, hence, a decrease in the oxidation number of the atom or ion. The reduction half-reaction is given below:

3 Pb²+ (aq) ---> 3 Pb (s)

The lead (ii) ion, Pb²+ having a charge of +2 gains two electrons each to become the neutral metallic lead atom, Pb, with oxidation number of zero. Since 3 moles of Pb²+ are reacting, 6 moles of electrons are gained.

3 Pb²+ (aq) + 6 e- ----> 3 Pb (s)

Answer:

See explanation and image attached

Explanation:

The acid-catalyzed hydrolysis of a nitrile to give a carboxylic acid occurs by initial protonation of the nitrogen atom. This step is shown in the image attached.

The next step is the nucleophilic addition of water. The task is to show the movement of electrons in this step of the reaction mechanism. This was clearly shown in the image attached to this answer.

Answer:

c......................

Answer:

electrons will fill the lowest energy orbitals first and then move up to higher energy orbitals only after the lower energy orbitals are full

Answer:

The mass of silver carbonate precipitated is 5.18 grams.

Explanation:

Molarity of the silver nitrate solution = 0.671 M

Volume of the silver nitrate solution = 56.0 mL

[tex]1 mL = 0.001 L\\56.0 mL = 56.0\times 0.001 L=0.0560 L[/tex]

Moles of silver nitrate = n

[tex]Molarity=\frac{\text{Moles of compound}}{\text{Volume of solution in Liters}}\\\\0.671 M=\frac{n}{0.0560 L}\\n=0.671 M\times 0.0560 L=0.0376 mol[/tex]

Moles of silver nitrate used = 0.0376 mol

[tex]K_2CO_3+2AgNO_3\rightarrow Ag_2CO_3+2KNO_3[/tex]

According to the reaction, 2 moles of silver nitrate gives 1 mole of silver carbonate, then 0.0376 moles of silver nitrate:

[tex]=\frac{1}{2}\times 0.0376 mol=0.0188 \text{mol of }Ag_2CO_3[/tex]

Moles of the silver carbonate formed = 0.0188 mol

Molar mass of silver carbonate = 275.7453 g/mol

Mass of silver carbonate :

[tex]=275.7453 g/mol\times 0.0188 mol=5.1840 g\approx 5.18 g[/tex]

The mass of silver carbonate precipitated is 5.18 grams.

Answer:

True

Explanation:

When two atoms are at infinite distance from each other, the both atoms posses high energy.

However, as they begin to approach each other, the distance between them gradually decreases and so does their energy.

A point is eventually reached when the potential energy curve reaches its minimum value. The internuclear distance between the two atoms at this point is called the bond length of the system.

Answer:

HF...Ta... W....Lu...

Answer:

Explanation:

CCl4 => C + 2Cl2

Answer:

fjskeowkcnekvo Dee five votes come vote for dog even r

Answer:

The postabsorptive state (also called the fasting state) occurs when the food is already digested and absorbed, and it usually occurs overnight, when you sleep (if you skip meals for some days, you will enter in this state).

The catabolic state is the metabolic breakdown of molecules into simpler ones, releasing energy (heat) and utilizable resources.

Now, when you are in a postabsorptive state, the glucose levels start to drop, then the body starts to depend on the glycogen stores, which are catabolized into glucose, this is defined as the start of the postabsorptive state.

So yes, as the postabsorptive states, catabolic processes start to happen, so the statement is true.

Answer:

C). Half-reactions with SRP values greater than zero are spontaneous.

Explanation:

SRPs or Standard Reduction Potentials are characterized as the ability of a probable distinction among the anode and cathode of a usual/standard cell. It aims to examine the capacity of chemicals to reduce themselves.

The third statement asserts a true claim regarding the SRPs(Standard Reduction Potentials) that the 'half-reactions which take place with the SRP possesses the values higher than zero and they are unconstrained.' The other statements are incorrect as they either show the estimation of SRPs more than 0 or display them as being restricted. Thus, option C is the correct answer.

Answer:

Bromine radical formation is carried out in the presence of Br₂ and Cl₂ causing the normal selectivity not to be observed ( this causes the difference in activation energy to be reduced )

Explanation:

Why the normal selectivity expected for bromination is not observed

On the basis of selectivity and applying the Arrhenius equation the greater the difference between the activation energies the more the selectivity.

as seen in the formation of primary and secondary radicals in the Bromine radical formation. this difference is caused mainly by the propagation step ( exothermic ) . But the main reason why the the usual selectivity of bromination is not observed is because it Bromine radical formation is carried out in the presence of Br₂ and Cl₂ ( this causes the difference in activation energy to be reduced )

Answer:

A: ΔH

Explanation:

Endothermic reactions are this that occur as a result of absorption of heat energy from the surroundings by the reactants to form new products.

Thus, we can say it is one with an increase in enthalpy (ΔH) of the system.

Thus, option A is correct.

Answer:

Atoms are similar in the way that their nuclei contain only protons and neutrons.

Answer:

All things are made of atoms, and all atoms are made of the same three basic particles - protons, neutrons, and electrons. But, all atoms are not the same. The difference in the number of protons and neutrons in atoms account for many of the different properties of elements.

I hope this helps :)

Answer:

я не знаю ответа :(

Explanation: