Given a 64.0 V battery and 30.0 Ω and 88.0 Ω resistors, find the current (in A) and power (in W) for each when connected in series. I30.0 Ω = A P30.0 Ω = W I88.0 Ω = A P88.0 Ω = W (b) Repeat when the resistances are in parallel. I30.0 Ω = A P30.0 Ω = W I88.0 Ω = A P88.0 Ω = W

Answers

Answer 1

Answer:

a. i. 0.542 A ii. 8.813 W iii. 0.542 A iv. 25.85 W

b. i. 2.13 A ii. 136.53 W iii. 0.727 A iv. 46.55 W

Explanation:

a. Find the current (in A) and power (in W) for each when connected in series.

Since the resistors are connected in series, their combined resistance is R = R₁ + R₂ where R₁ = 30.0 Ω and R₂ = 88.0 Ω.

So, substituting the values of the variables into the equation, we have

R = R₁ + R₂

R =  30.0 Ω +  88.0 Ω

R =  118.0 Ω

Since from Ohm's law, V = IR where V = voltage across circuit = battery voltage = 64.0 V, I = current in circuit and R = total resistance of circuit = 118.0 Ω

So, I = V/R = 64.0V/118.0 Ω = 0.542 A

Since the resistors are in series, the same current flows through them

i. Current in 30.0 Ω

Current in 30.0 Ω is I = 0.542 A since the resistors are in series.

ii Power in the 30.0 Ω

The power in the 30.0 Ω is P₁ = I²R₁ where I = current = 0.542 A and R₁ = resistance = 30.0 Ω

So, P₁ = I²R₁

= (0.542 A)² × 30.0 Ω

= 0.293764  A² × 30.0 Ω

= 8.8129 W

≅ 8.813 W

iii. Current in 88.0 Ω

Current in 88.0 Ω is I = 0.542 A since the resistors are in series.

iv. Power in the 88.0 Ω

The power in the 88.0 Ω is P = I²R₂ where I = current = 0.542 A and R₂ = resistance = 88.0 Ω

So, P₂ = I²R₂

= (0.542 A)² × 88.0 Ω

= 0.293764  A² × 88.0 Ω

= 25.8512 W

≅ 25.85 W

(b) Repeat when the resistances are in parallel.

Since the resistors are connected in parallel, the same voltage is applied across them.

i. Current in 30.0 Ω

Using Ohm's law, V = I₁R₁ where V = voltage = 64.0 V, I₁ = current in 30.0 Ω resistor and R₁ = resistance = 30.0 Ω

So, I₁ = V/R₁ = 64.0 V/30.0 Ω = 2.13 A

ii Power in the 30.0 Ω

The power in the 30.0 Ω resistor is P₁ = V²/R₁ where V = voltage across resistor = 64.0 V and R₁ = resistance = 30.0 Ω

So, P₁ = V²/R₁

P₁ = (64.0 V)²/30.0 Ω

P₁ = 4096 V²/30.0 Ω

P₁ = 136.53 W

iii. Current in 88.0 Ω

Using Ohm's law, V = I₂R₂ where V = voltage = 64.0 V, I₂ = current in 88.0 Ω resistor and R₂ = resistance = 88.0 Ω

So, I₂ = V/R₂ = 64.0 V/88.0 Ω = 0.727 A

iv. Power in the 88.0 Ω

The power in the 30.0 Ω resistor is P₂ = V²/R₂ where V = voltage across resistor = 64.0 V and R₂ = resistance = 88.0 Ω

So, P₂ = V²/R₂

P₂ = (64.0 V)²/88.0 Ω

P₂ = 4096 V²/88.0 Ω

P₂ = 46.55 W


Related Questions

why clinical thermometer cannot be used to measure the boiling point of water​

Answers

Answer:

: No, a clinical thermometer cannot be used to measure the temperature of boiling water because it has a small range and might break due to extreme heat. ... The temperature is around 100 degrees Celsius.

In the late 19th century, great interest was directed toward the study of electrical discharges in gases and the nature of so-called cathode rays. One remarkable series of experiments with cathode rays, conducted by J. J. Thomson around 1897, led to the discovery of the electron.
With the idea that cathode rays were charged particles, Thomson used a cathode-ray tube to measure the ratio of charge to mass, q/m, of these particles, repeating the measurements with different cathode materials and different residual gases in the tube.
Part A
What is the most significant conclusion that Thomson was able to draw from his measurements?
He found a different value of q/m for different cathode materials.
He found the same value of q/m for different cathode materials.
From measurements of q/m he was able to calculate the charge of an electron.
From measurements of q/m he was able to calculate the mass of an electron.
Part B
What is the distance Δy between the two points that you observe? Assume that the plates have length d, and use e and m for the charge and the mass of the electrons, respectively.
Express your answer in terms of e, m, d, v0, L, and E0.
Part C
Now imagine that you place your entire apparatus inside a region of magnetic field of magnitude B0 (Figure 2) . The magnetic field is perpendicular to E⃗ 0 and directed straight into the plane of the figure. You adjust the value of B0 so that no deflection is observed on the screen.
What is the speed v0 of the electrons in this case?
Express your answer in terms of E0 and B0.

Answers

Answer:

a) He found the same value of q/m for different cathode materials.

b)      y = [tex]- \frac{e}{m}\ \frac{E_o v_o^2 }{2d^2}[/tex] ,  c)  v = [tex]\frac{E_o}{B_o}[/tex]

Explanation:

In Thomson's experiments he was able to measure the deflection of the light beam under the effect of the magnetic field and with these results find the e / m relationship, which in all cases is the same, therefore the most important conclusion is that the value e E / m is constant for all materials.

b) In the part of the plates the electrons are accelerated by the electric field,

              F = ma

             - e E = m a

              a = - (e/m)  E₀

               

the distance traveled is          

X axis

          x = v₀ t

the separation of the plates is x = d

          t = vo / d

               

Y axis

          y = v_{oy} t + ½ to t²

          y = ½ a t²

          y = [tex]- \frac{e}{m}\ \frac{E_o v_o^2 }{2d^2}[/tex]

           

c) In this case there is a magnetic field B₀ and the electrons have no deflection

         F = - e E + e v x B

       

if there is no deviation F = 0

         e E = e v B

         v = [tex]\frac{E_o}{B_o}[/tex]

A wheel accelerates so that it's angular speed increases uniformly from 150 rads/s to 580 rads/s in 16 revolutions.Cakcjlate its angular acceleration. ​

Answers

Answer:

A = 26.875 rad/s²

Explanation:

Given the following data;

Initial angular speed, Uw = 150 rads/s.

Final angular speed, Vw = 580 rads/s.

Time = 16 seconds.

To calculate the angular acceleration;

From kinematics equation;

At = Vw - Uw

Where;

A is the angular acceleration.t is the timeVw is the final angular speed.Uw is the initial angular speed.

Substituting into the formula, we have;

A*16 = 580 - 150

16A = 430

A = 430/16

A = 26.875 rad/s²

A block of mass 10kg is suspendet at a diameter of 20cm from the centre of a uniform bar im long, what force is required to balance it at its centre of gravity by applying the fore at the other end of the bar?​

Answers

Answer:

4 kg of force

Explanation:

Force = (mass x distance to fulcrum) / length of fulcrum to end

Subsitute values

F = (10 x 20)/50

F =4

suppose a car of 1200kg is moving with a velocity of 40km/hr therefore its kinetic energy is not zero. 1. explain briefly what happens to its kinetic energy when the driver applies the breaks and the car stops​

Answers

Answer:

Explanation:

For starters begin with a warning not to touch the brake drums. All of the KE is transferred to the brake drums. The result is a large rise in temperature. Heat. If you press hard on the brakes, rubber is left on the road and there is heat involved in that too.

Answer:

KInetic energy reduces.

Explanation:

Application of breaks reduces velocity. Reduction of velocity constitutes velocity reduction.

For more help contact +1 (304) 223-3136

how do you calculate voltage drop

Answers

Answer:

Multiply current in amperes by the length of the circuit in feet to get ampere-feet. Circuit length is the distance from the point of origin to the load end of the circuit.

Divide by 100.

Multiply by proper voltage drop value in tables. The result is voltage drop.

Explanation:

An audience of 2250 fills a concert hall of volume 32000 m^3. If there were no ventilation, by how much would the temperature of the air rise over a period of 2.0 h due to the metabolism of the people (70 W/person)?

Answers

246 and 64 minutes later

The slope of a d vs t graph represents velocity. Describe 3 ways you know this to be true.

Answers

Answer:

Look at explanation

Explanation:

I only know 1 way, there is another way you can rephrase this using derivatives but that's pretty much the same thing.

The slope is calculated by Δy/Δx so the slope of distance vs time graph is Δd/Δt which is the velocity

A 200-lb man carries a 10-lb can of paint up a helical staircase that encircles a silo with radius 30 ft. If the silo is 60 ft high and the man makes exactly two complete revolutions, how much work is done by the man against gravity in climbing to the top

Answers

Answer:

17.07 kJ

Explanation:

The work done against gravity by the man W equals the potential energy change of the man and can of paint, ΔU

W = ΔU = mgΔy where m = mass of man and can of paint = 200 lb + 10 lb = 210 lb = 210 × 1 kg/2.205 lb, g = acceleration due to gravity = 9.8 m/s² and Δy = height of silo = 60 ft = 60 × 1m/3.28 ft

Since W = mgΔy, we substitute the values of the variables into the equation.

So,

W = mgΔy

W = 210 lb × 1 kg/2.205 lb × 9.8 m/s² × 60 ft × 1m/3.28 ft

W = 123480/7.2324 J

W = 17073.2 J

W = 17.0732 kJ

W ≅ 17.07 kJ

The mass of the sun is 2*10^30 kg and its radius is
6.96*10^8 m. what is the weight of 1kg mass on the
surface of the sun.

Answers

Explanation:

Distance d=1.5×108 km=1.5×1011 m

Mass of the sun, m=2×1030 kg

Mass of the earth, M=6×1024 kg

Force of gravitation, F=G×d2m×M

F=6.7×10−11×(1.5×1011)22×1030×6×1024=3.57×1022 N

Two substances, M and N, have specific heats c and 2c. if heats Q and 4Q are supɔlied to Mand N, respectively, their changes in temperature become equal. If substance M has mass m, find the mass of substance N in terms of m

Answers

Answer:

If the mass of B is m and the temperature change is the same, the mass of B will be 2m.

Explanation:

Q = mcT

T = mc/Q

M = 4Q/2cT........... (1)

T = Q/mc

Plug this in equation 1.

M = 4Q/(2c × Q/mc)  = 4Q ÷ 2Q/m  = 4Q × m/2Q = 2m

A horizontal force of P=100 N is just sufficient to hold the crate from sliding down the plane, and a horizontal force of P=350 N is required to just push the crate up the plane. Determine the coefficient of static friction between the plane and the crate, and find the mass of the crate.

Answers

"down/up the plane" suggests an inclined plane, but no angle is given so I'll call it θ for the time being.

The free body diagram for the crate in either scenario is the same, except for the direction in which static friction is exerted on the crate. With the P = 100 N force holding up the crate, static friction points up the incline and keeps the crate from sliding downward. When P = 350 N, the crate is pushed upward, so static friction points down. (see attached FBDs)

Using Newton's second law, we set up the following equations.

• p = 100 N

F (parallel) = f + p cos(θ) - mg sin(θ) = 0

F (perpendicular) = n - p sin(θ) - mg cos(θ) = 0

P = 350 N

F (parallel) = P cos(θ) - F - mg sin(θ) = 0

F (perpendicular) = N - P sin(θ) - mg cos(θ) = 0

(where n and N are the magnitudes of the normal force in the respective scenarios; ditto for f and F which denote static friction, so that f = µn and F = µN, with µ = coefficient of static friction)

Solve for n and N :

n = p sin(θ) + mg cos(θ)

N = P sin(θ) - mg cos(θ)

Substitute these into the corresponding equations containing µ, and solve for µ :

µ = (mg sin(θ) - p cos(θ)) / (mg cos(θ) + p sin(θ))

µ = (P cos(θ) - mg sin(θ)) / (P sin(θ) + mg cos(θ))

Next, you would set these equal and solve for m :

(mg sin(θ) - p cos(θ)) / (mg cos(θ) + p sin(θ)) = (P cos(θ) - mg sin(θ)) / (P sin(θ) + mg cos(θ))

...

Once you find m, you back-substitute and solve for µ, but as you might expect the result will be pretty complicated. If you take a simple angle like θ = 30°, you would end up with

m ≈ 36.5 kg

µ ≈ 0.256

The coefficient of static friction between the plane and the crate is μ = 0.256 and the mass of the crate is m=36.4 kg.

From the given,

The force that opposes the crate by sliding is P = 100N

In X-axis, the sum of forces is zero.

ΣF = 0

Pcosθ - mgsinθ-Ff = 0

Ff = Pcosθ - mgsinθ

In Y-axis

Psinθ - mgcosθ - N = 0

N = Psinθ-mgcosθ

Frictional force, Ff = μN, μ is the coefficient of friction

Ff = μN

Pcos30- mgsin30 + μ( Psin30+mgcos30) = 0

μ = mgsin30-Pcos30/Psin30+mgcos30 ------1

The block is sliding with the horizontal force, F = 350N

X-axis

P₂cosθ - mgsinθ-Ff = 0

Y-axis

P₂sinθ - mgcosθ - N = 0

N = P₂sinθ-mgcosθ

μ = P₂cos30-mgsin30/P₂sin30-mgcos30   -----2

Equate equations 1 and 2

mgsin30-Pcos30/Psin30+mgcos30 =P₂cos30-mgsin30/P₂sin30-mgcos30

4.905m-86.6/50+8.49 = 303.1-4.905m/175+8.49

41.7m² + 123m - 1.516×10⁴ = 0

-41.7m² +2330m -1.516×10⁴(4.905-86.6)(175+8.49) =(303.1-4.905)(50+8.49)

83.4m² - 2207m -3.03×10⁴ = 0

m= 36.4 kg

Hence, the mass of the crate is 36.4 Kg.

Substitute the value of m in equation 1,

μ = 4.905(36.4) - 86.6 / 50 + 8.49

μ  = 0.256

Thus, the coefficient of static friction is 0.256.

To learn more about friction and its types:

https://brainly.com/question/30886698

#SPJ1

In 2009 Usain Bolt set the world record time by running 100 meters in 9.58 s. Assume that during this race he ran in a straight line with constant acceleration a. What would be the required constant acceleration a

Answers

Usain Bolt I think, sorry if it’s not right

In 2009 Usain Bolt set the world record time by running 100 meters in 9.58 seconds, assuming that he ran this race with constant acceleration, then the required constant acceleration would have been

What are the three equations of motion?

There are three equations of motion given by  Newton

v = u + at

S = ut + 1/2×a×t²

v² - u² = 2×a×s

By using the second equation of motion given by Newton,

S = ut + 1/2at²

100= 0 + 0.5*a*9.58²

a = 2.17 meters / second²

Thus,the required constant acceleration of Usain Bolt would have been 2.17 meters / second².

To learn more about equations of motion here, refer to the link;

brainly.com/question/5955789

#SPJ2

What are the differences among elements, compounds, and mixtures?

Answers

Answer:

Elements have a characteristic number of electrons and protons.Both Hydrogen(H) and oxygen(O) are two different elements.

••••••••••••••••

Compounds are chemical substances where the atoms atoms of two different elements are combined together. It is made of .Hydrogen(H) and Oxygen(O) both qr4 naturally gases,but they react to form water(H2O),which is liquid compound.

•••••••••••••••

A mixture is made of atleast two parts》 solid,liquid or gas.The difference is that it's not a chemical substance that's bonded by other elements. 

------------------------------

Hope it helps...

Have a great day!!!

Answer: Elements have a characteristic number of electrons and protons. Both Hydrogen(H) and oxygen(O) are two different elements. Compounds are chemical substances where the atoms atoms of two different elements are combined together. It is made of.Hydrogen(H) and Oxygen(O) both qr4 naturally gases, but they react to form water(H2O), which is liquid compound. A mixture is made of at least two parts solid, liquid, or gas. The difference is that it's not a chemical substance that's bonded by other elements.

suppose the tank is open to the atmosphere instead of being closed. how does the pressure vary along

Answers

Answer:

Pressure is more in the open container than the closed one.

Explanation:

The pressure due to the fluid at a depth is given by

Pressure = depth x density of fluid x gravity

So, when the container is open, the atmospheric pressure is also add  up but when  the container is closed only the pressure due to the fluid is there.

So, when the container is open, the pressure is atmospheric pressure + pressure due to the fluid.

hen the container is closed only the pressure due to the fluid is there.

A small object A, electrically charged, creates an electric field. At a point P located 0.250 m directly north of A, the field has a value of 40.0 N/C directed to the south. If a second object B with the same charge as A is placed at 0.250m south of A (so that objects A and B and point P follow a straight line), what is the magnitude of the total electric field produced by the two objects at P?

Answers

Answer:

E_total = - 50 N / A

Explanation:

The electric field is a vector magnitude whereby

          E_total = Eₐ + E_b

where the bold letters indicate vectors, in this case the charges of the two objects A and B are the same and they are on the same line

         E_total = - E_a - E_b

         

the electric field for a point charge is

        E_a = [tex]k \ \frac{q_a}{r_a^2 }[/tex]

        qₐ= Eₐ rₐ² / k

indicates that Eₐ = 40.0 N / C

        qₐ = 40.0 0.250²/9 10⁹

        qₐ = 2.777 10⁻¹⁰ C

indicates that the charge of the two points is the same

        qₐ = q_b

      E_total = - k qₐ / rₐ² - k qₐ / (2 rₐ)²

      E_total = [tex]-k \ \frac{q_a}{r_a^2} \ ( 1 + \frac{1}{4} )[/tex]

       

we calculate

       E_total = - 40.0 (5/4)

       E_total = - 50 N / A

A uniform 1500-kg beam, 20.0 m long, supports a 15,000-kg printing press
5.0 m from the right support column (Figure slide 8). Calculate the force
on each of the vertical support columns.

Answers

Answer:

[tex]\mathbf{F_1=4.41*10^4\ N}[/tex]

[tex]\mathbf{F_2 = 1.176*10^5 \ N}[/tex]

Explanation:

The missing image of the figure slide is attached in below.

However, from the model, it is obvious that it is in equilibrium.

As a result, the relation of the force and the torque is said to be zero.

i.e.

[tex]\sum F = 0[/tex] and [tex]\sum \tau = 0[/tex]

From the image, expressing the forces through the y-axis, we have:

[tex]F_1+F_2 = W_B + W_P \\ \\ \implies 9.8(1500+15000) \\ \\ \implies \mathtt{1.617\times 10^5 \ N}[/tex]

Also, let the force [tex]F_1[/tex] be the pivot and computing the torque to determine [tex]F_2[/tex]:

Then:

[tex]F_1(0)+F_2(20.0) = 10.0W_B + 15.0W_P[/tex]

[tex]F_2 = \dfrac{((10*1500)+(15*15000))*9.8}{20.0}[/tex]

[tex]F_2 = 117600 \ N[/tex]

[tex]\mathbf{F_2 = 1.176*10^5 \ N}[/tex]

For the force equation:

[tex]F_1+F_2=1.617*10^5 \ N;[/tex]

where:

[tex]F_2 = 1.176*10^5 \ N[/tex]

Then:

[tex]F_1+1.176*10^5 \ N=1.617*10^5 \ N[/tex]

[tex]F_1=1.617*10^5 \ N-1.176*10^5 \ N[/tex]

[tex]F_1=44100\ N[/tex]

[tex]\mathbf{F_1=4.41*10^4\ N}[/tex]

If you and a friend are standing side-by-side watching a soccer game, would you both view the motion from the same reference frame?

a. Yes, we would both view the motion from the same reference point because both of us are at rest in Earth’s frame of reference.
b. Yes, we would both view the motion from the same reference point because both of us are observing the motion from two points on the same straight line.
c. No, we would both view the motion from different reference points because motion is viewed from two different points; the reference frames are similar but not the same.
d. No, we would both view the motion from different reference points because response times may be different; so, the motion observed by both of us would be different.

Answers

Answer:

the correct is C

Explanation:

The concept of a frame of reference is of crucial importance in physics, because it is the system from which measurements are made. Therefore, the relationships between the different reference frames must be clear so that the measurements made can be compared correctly.

In this case, the first observed sees the movement of the ball, suppose it moves a distance r, the second observed is next to me, separated by a distance x, therefore a frame of reference located in the movement of the ball. ball r '.

Consequently, the measurement carried out is related by

             r = r’ + x

where the bold letters indicate wind blowers.

With these explanations we review the different answers, the correct one is C

what will be the gravitational force between two heavenly bodies if the masses of both are tripled keeping the distance between them constant

Answers

Answer:

If the mass of one of the objects is tripled, then the force of gravity between them is tripled. ... Since gravitational force is inversely proportional to the square of the separation distance between the two interacting objects, more separation distance will result in weaker gravitational forces

State whether plastic is biodegradable or non-biodegradable ? Give reasons for your answer.​

Answers

Answer:

non biodegradable

Explanation:

It is non biodegradable because plastic cannot dispose off easily ..

2.
Select the correct answer.
Erica is working in the lab. She wants to remove the fine dust particles suspended in a sample of oil. Which method is she most likely to use?

Answers

Answer:

Reverse Osmosis

Explanation:

Reverse osmosis is a type of filtration that involves passing a solvent through a semipermeable membrane in the opposite direction that natural osmosis does. Separation is always enforced through the use of pressure in this process. Ions, fine dust particles, molecules, and larger particles are typically removed from solvents using this method. The technique is particularly popular in the treatment and purification of water.

Answer:

filtration is used to separate

g Three masses are located in the x- y plane as follows: a mass of 6 kg is located at (0 m, 0 m), a mass of 4 kg is located at (3 m, 0 m), and a mass of 2 kg is located at (0 m, 3 m). Where is the center of mass of the system

Answers

Answer:

Xcm = (6 * 0 + 4 & 3 + 2 * 0) / 12 = 1

Ycm = (6 * 0 + 4 * 0 + 2 * 3) / 12 = 1/2

(Xcm , Ycm) = (1 , 1/2)

Using definition of center of mass

George Frederick Charles Searle

Answers

Answer:

George Frederick Charles Searle FRS was a British physicist and teacher. He also raced competitively as a cyclist while at the University of Cambridge. Wikipedia

Explanation:

GIVE BRAINLIST

Wwwwwwwwwwwwwwwwwwwwwwwwwwwwww

When a golfer tees off, the head of her golf club which has a mass of 158 g is traveling 48.2 m/s just before it strikes a 46.0 g golf ball at rest on a tee. Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s. Neglect the mass of the club handle and determine the speed of the golf ball just after impact.

Answers

Answer:

v₂ = 53.23 m/s

Explanation:

Given that,

The mass of a golf club, m₁ = 158 g = 0.158 kg

The initial speed of a golf club, u₁  =  48.2 m/s

The mass of a golf ball, m₂ = 46 g = 0.046 kg

It was at rest, u₂ = 0

Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s, v₁ = 32.7 m/s

We use the conservation of energy to find the speed of the golf ball just after impact as follows :

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\v_2=\dfrac{m_1u_1-m_1v_1}{m_2}\\\\v_2=\dfrac{0.158(48.2)-0.158(32.7)}{0.046}\\\\=53.23\ m/s[/tex]

So, the speed of the golf ball just after the impact is equal to 53.23 m/s.

A 31 kg block is initially at rest on a horizontal surface. A horizontal force of 83 N is required to set the block in motion. After it is in motion, a horizontal force of 55 N i required to keep it moving with constant speed. From this information, find the coefficients of static and kinetic friction

Answers

Answer:

The static and kinetic coefficients of friction are 0.273 and 0.181, respectively.

Explanation:

By Newton's Laws of Motion and definition of maximum friction force, we derive the following two formulas for the static and kinetic coefficients of friction:

[tex]\mu_{s} = \frac{f_{s}}{m\cdot g}[/tex] (1)

[tex]\mu_{k} = \frac{f_{k}}{m\cdot g}[/tex] (2)

Where:

[tex]\mu_{s}[/tex] - Static coefficient of friction, no unit.

[tex]\mu_{k}[/tex] - Kinetic coefficient of friction, no unit.

[tex]f_{s}[/tex] - Static friction force, in newtons.

[tex]f_{k}[/tex] - Kinetic friction force, in newtons.

[tex]m[/tex] - Mass, in kilograms.

[tex]g[/tex] - Gravitational constant, in meters per square second.

If we know that [tex]f_{s} = 83\,N[/tex], [tex]f_{k} = 55\,N[/tex], [tex]m = 31\,kg[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then the coefficients of friction are, respectively:

[tex]\mu_{s} = \frac{83\,N}{(31\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]

[tex]\mu_{s} = 0.273[/tex]

[tex]\mu_{k} = \frac{55\,N}{(31\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]

[tex]\mu_{k} = 0.181[/tex]

The static and kinetic coefficients of friction are 0.273 and 0.181, respectively.

A body starts from rest and accelerates uniformly at 5m/s. Calculate the time taken by the body to cover a distance of 1km

Answers

Answer:

20 seconds

Explanation:

We are given 2 givens in the first statement

v0=0 and a=5

And we are trying to find time needed to cover 1km or 1000m.

So we use

x-x0=v0t+1/2at²

Plug in givens

1000=0+2.5t²

solve for t

t²=400

t=20s

Mary needs to row her boat across a 160 m-wide river that is flowing to the east at a speed of 1.5 m/s. Mary can row with a speed of 3.6 m/s. If Mary points her boat due north, how far from her intended landing spot will she be when she reaches the opposite shore? What is her speed with respect to the shore?

Answers

Answer: 66.67 m, 44.44 s

Explanation:

Given

Velocity of flow is [tex]u=1.5\ m/s[/tex]

Mary can row with speed [tex]v=3.6\ m/s[/tex]

Width of the river [tex]y=160\ m[/tex]

Flow will drift the Mary towards east, while Mary boat will cause it to travel in North direction

time taken to cross river

[tex]\Rightarrow t=\dfrac{160}{3.6}\\\\\Rightarrow t=\dfrac{400}{9}\ s[/tex]

Flow will drift Mary by

[tex]\Rightarrow x=ut\\\\\Rightarrow x=1.5\times \dfrac{400}{9}\\\\\Rightarrow x=66.67\ m[/tex]

Velocity w.r.t shore is

[tex]\Rightarrow v_{net}=\sqrt{3.6^2+1.5^2}\\\Rightarrow v_{net}=\sqrt{15.21}\\\Rightarrow v_{net}=3.9\ m/s[/tex]

What is the strength of the magnetic field a distance 4.4 mm above the center of a circular loop of radius 0.8 mm and current 474.1 A

Answers

Answer:

B = 0.118 T

Explanation:

From Biot-Savart Law:

[tex]B = \frac{\mu_o I}{2\pi r}[/tex]

where,

B = strength of magnetic field = ?

μ₀ = 4π x 10⁻⁷ Tm/A

I = current enclosed = 474.1 A

r = radius = 0.8 mm = 8 x 10⁻⁴ m

Therefore,

[tex]B = \frac{(4\pi\ x\ 10^{-7}\ Tm/A)(474.1\ A)}{2\pi(8\ x\ 10^{-4}\ m)}[/tex]

B = 0.118 T

In an exciting game, a baseball player manages to safely slide into second base. The mass of the baseball player is 88.9 kg and the coefficient of kinetic friction between the ground and the player is 0.53. (a) Find the magnitude of the frictional force in newtons. N (b) It takes the player 1.7 s to come to rest. What was his initial velocity (in m/s)

Answers

Answer:

Look at explanation

Explanation:

a) Kinetic Friction= μmg

μmg=0.53*88.9*9.8=461.75N

b)  -461.75N=ma

a= -5.19m/s^2

v=v0+at

5.19*1.7=v0

v0=8.81m/s^2

(a) The magnitude of the frictional force will be 461.75N

(b)The initial velocity will be 8.81 m/s.

What is kinetic friction?

A force that acts among sliding parts is referred to as kinetic friction. A body moving on the surface is subjected to a force that opposes its progressive motion

The size of the force will be determined by the kinetic friction coefficient between the two materials.

The given data in the problem is;

μ is the coefficient of kinetic friction= 0.53.

m is the mass = 88.9 kg

g is the acceleration due to gravity= 9.81 m/s²

v is the speed =?

The formula for friction force is;

[tex]\rm F= \mu R \\\\ R=mg \\\\ F= \mu mg \\\\\ F=0.53 \times 88.9 \times 9.81 \\\\ F= 461.75 \ N[/tex]

Mechanical force is found as;

F=ma

-461.75=(88.9)a

(-ve shows the -ve work done)

a=-5.19 m/s

From the Newton's first equation of motion;

v=u+at

0=u+at

u=-at

u=(- (-5.19)(1.7)

u=8.81 m/s²

To learn more about the kinetic friction refer to;

https://brainly.com/question/13754413

#SPJ2

If earth is compressed to the volume of moon, its acceleration due to gravity
* i. decreases
ii. remains same as before
iii. increases
iv. none of these ​

Answers

Answer:

increase

Explanation:

hope it will help you:)

Other Questions
What happens in Diabetes? please make rough draft of this pre writing of 150 wordsWhen I was at primary school in 2nd grade. I was a very geeky and scrawny socially awkward type person. I had only two friends both of there name was "Austin" but I don't remember their Last names. I was at music class and the who's name I also forgot. Decided last minute to hold a talent show. No one really did anything but a very unintelligent little Luke Oden. Decided to sing the ninjago season 1 theme song. I went up and sang my song. It was terrible and I was bullied for a couple of months after. Which statement describes Mustafa Kemal? Carlos has chosen twelve different compact discs (CDs) he would like to buy. Four are rap music, five are country music, and three are heavy metal music. Carlos then randomly selects five of the 12 CDs to purchase. What is the probability that his purchase includes at least one CD from each of the three categories Find all complex numbers z such that z^4 = -4.Note: All solutions should be expressed in the form a+bi, where a and b are real numbers. What is the capital of the starred country on this map of Eastern Asia?A. SeoulB. BeijingC. TaipeiD. Ulaan Bator Which of these is an expressed power of Congress? Solve the equation for y. Identify the slope and y-intercept then graph the equation. Y=-3x+1Y=M=B=Please Include a picture of the graph and show your work if you can someone answer this please Write essay on Mother's day ^_^don't cut and paste from anywhere On a sunny day, a building and its shadow form the sides of a right triangle. If the hypotenuse is 34 m long and the shadow is 24 m, how tall is the building 4x+6=10. what is the value of x? Graph the line that represents a proportional relationship between ddd and ttt with the property that an increase of 3 units in ttt corresponds to an increase of 8 units in ddd.What is the unit rate of change of ddd with respect to ttt? (That is, a change of 1 unit in t will correspond to a change of how many units in d?) An electricity post is supported by a 12 m long strut(wire). If the strut makes an angle of 53 with the ground level, how far from the post is the strut attached to the ground? 02 - O Renascimento cultural e artstico europeu do sculo XVI foi um processo lento e prolongado de transformaes que remontam ao perodo final da Idade Mdia, principalmente a partir do sculo XI. A partir dos seus conhecimentos referentes ao perodo, responda: a) Quais os principais aspectos valorizados pelos artistas renascentistas em suas obras e em quais locais da Europa esta produo artstica foi mais valorizada? For a standard normal distribution, find:P(z > c) = 0.058Find c. Read the following excerpts from the draft and revision of the Declaration ofIndependence:DRAFT:(He has endeavored to bring on the inhabitants of ourfrontiers the merciless Indian savages, whose known ruleof warfare is an undistinguished destruction of all ages,sexes, & conditions of existence.[He has incited treasonable insurrections of our fellowcitizens, with the allurements of forfeiture & confiscationof our property.REVISION:He has excited domestic Insurrection amongst us, and hasendeavoured to bring on the inhabitants of our frontiers,the merciless Indian Savages, whose known rule ofwarfare, is an undistinguished destruction of all ages,sexes and conditions.Why might the Continental Congress have revised this portion of the draft?O A. The second paragraph in the draft stated a falsehood that couldn'tbe substantiated, so the revision makes the passage morereliable.O B. The second paragraph was redundant in the draft, so the revisioncut it completelyO c. The second paragraph in the draft was off-topic, so cutting it in therevision helped make this passage more linear.O D. The revision incorporates the same idea in a more concise way.because the second paragraph of the draft is redundant. The first term of a sequence is 1 and every term after the first one is 1 more than the square of the preceding term. What is the fifth term? Taylor wirtes a exppersion with five terms all 5 terms are like terms how many terms are in equivilent exppersions with the least numbers of terms ? ActivityNow that you have learned about characteristics of a strong essay and had a chance to evaluate a sample, It's time to write one of your own.Revisit the US history exam resources page and select a sample question from the free-response samples that is different from the one youevaluated. Follow the directions to write your essay, and then evaluate yourself using the scoring guidelines rubric and sample responses to thetopic you selected.