When the data can flow across a cable in both directions, this is known as full duplex communication. Explanation: In a duplex type of topology or communication, data or information can be transferred in both directions
When data can flow across the cable in both directions, this is known as full duplex communication.
What is Duplex Communication?
A point-to-point system with two or more connected parties or equipment that can communicate with one another in both directions is known as a duplex communication system.In many communication networks, duplex systems are used, either to provide a reverse way for the monitoring and remote adjustment of equipment in the field, or to provide simultaneous communication in both directions between two linked parties. Full-duplex (FDX) and half-duplex (HDX) are the two different forms of duplex communication technologies.A full-duplex system allows for simultaneous communication between both sides. Simple telephone service is an illustration of a full-duplex equipment; callers can simultaneously speak and be heard by call recipients on both ends.Neither party may communicate with the other simultaneously in a half-duplex or semi-duplex system; instead, one way at a time is exchanged. Walkie-talkies, which are two-way radios with push-to-talk buttons, are an illustration of a half-duplex gadget.Correct Question: When data can flow across the cable in both directions this is known as a what communication?
To learn more about Communication from the given link
https://brainly.com/question/25793182
#SPJ4
suppose we have a byte-addressable computer using direct mapping with 16-bit main memory addresses and 32 blocks of cache. if each block contains 8 bytes, determine the size of the block field. (direct-16-32-8-block field)
The block field is three bytes in size.
In completely associative mapping, how big is the offset field?Assume we have a byte-addressable computer with 32 cache blocks and fully associative mapping, 16-bit main memory addresses. Calculate the size of the offset field if each block has 16 bytes. (16-32-16-offset field fully assimilated) Input: 4 5.
A 2-way set-associative cache holds how many sets?Four sets make up a two-way set-associative cache. With byte addressing, the main memory is divided into 2K blocks of eight bytes each. Show the main memory address format so that we can map main memory addresses to cache addresses in clause (a). Make careful to mention the fields and their sizes.
To know more about bytes visit :-
https://brainly.com/question/15750749
#SPJ4
Which is NOT a valid sparkline type?
O line
O column
Owin/loss
O bar
A ________ monitors network traffic for particular network segments or devices and analyzes network, transport, and application protocols to identify suspicious activity
A network intrusion detection system (NIDS) monitors network traffic for particular network segments or devices and analyzes network, transport, and application protocols to identify suspicious activity. NIDS are designed to detect and alert on potential security threats or anomalies that may indicate a breach or attack on a network.
A network intrusion detection system (NIDS) is a type of security software designed to monitor a network for malicious activity or policy violations. NIDSs operate by analyzing network traffic and comparing it against a set of rules or criteria to identify potentially malicious activity.
NIDSs can be configured to monitor specific protocols, ports, or traffic patterns and to alert administrators when suspicious activity is detected. They can also be configured to take automatic action in response to certain types of activity, such as blocking traffic from a particular IP address or triggering a system lockdown.
Learn more about NIDS, here https://brainly.com/question/20556615
#SPJ4
question 2 (10 pts): briefly explain the overall algorithm of afl approach. (hint: see its documentation)
American Fuzzy Lop, often known as AFL, is a smart fuzzer that generates new test cases by changing the seed input that is supplied at the start of the fuzzing process.
Describe the fuzzing.Programming and software development use fuzzing, a technique for automated software testing that involves providing random, false, or faulty input into a computer program.
The software is then examined for defects such as crashes, failed in-built code assertions, or potentially dangerous memory leaks.
The majority of the time, fuzzers are used to assess programs that accept structured inputs.
This structure, which distinguishes between acceptable and unacceptable input, is described, for instance, in a file format or protocol.
To learn more about American Fuzzy Lop refer to:
brainly.com/question/9579420
#SPJ4
in this lab, your task is to: configure windows update to: install updates for other microsoft products when windows is updated. allow the installation of feature updates to be deferred 60 days. allow quality updates to be deferred 30 days. configure windows to automatically download manufacturers' apps and custom icons for devices.
On the ITAdmin desktop system in your company, you must modify how Windows Update searches for and installs updates.
How do feature updates and quality updates differ from one another?
A feature update adds new features and enhances existing ones. It may be postponed for 60 days. A good update will have security upgrades. This much time can be put off: 30 days.
How much time can I put Windows Update on hold?
Additionally, you have the option of pausing feature updates for a device for up to 35 days after the setting is set. The device will check Windows Update for relevant feature updates when the pause option expires automatically after 35 days. The device's feature updates can then be paused once again after.
To know more Windows visit :-
https://brainly.com/question/13502522
#SPJ4
Draw a flowchart to print Hello world 10 timer.
Answer:
hope that helps...
p.s. I hope the writing is readable :(
a researcher conducted an experiment in whice he compared two methods of teaching if there were 10 people
A researcher ran an experiment in which he contrasted two teaching strategies for a class of ten students. then using 10 as a teaching strategy.
What is a good number of people for an experiment?When utilizing qualitative methods, 30 is more than sufficient and a respectable sample size, but when using quantitative methods and analysis, less than 100 is insufficient for even a basic statistical analysis.
It is fairly simple to differentiate instruction and learning. Giving lessons on a specific subject to a group of students is the simple definition of teaching. Learning, on the other hand, is obtaining knowledge through study, instruction, and experience.
Face-to-face lectures involve students and instructors interacting in real time, which is one of the key contrasts between face-to-face and online training. In contrast, online students study at their own pace, going through lectures and other course materials.
To learn more about teaching method refer to :
https://brainly.com/question/22786034
#SPJ4
_____ are used to associate a style sheet or style rule with a specific device or list of device features. a)Flexible layouts b)Responsive images c)Viewports d)Media queries
Media queries are used to associate a style sheet or style rule with a specific device or list of device features.
What is Media queries ?CSS 3's media queries feature enables content rendering to adjust to various circumstances, like as screen resolution (e.g. mobile and desktop screen size). In June 2012, the W3C suggested standard was established, and it is a key technology for responsive web design (RWD).The first draught of media queries appeared in Hkon Wium Lie's CSS proposal in 1994, but they were not included in CSS 1. A historical example of how media queries can be added in the future is the HTML4 Recommendation from 1997. W3C began working on media queries and another device support scheme called CC/PP in 2000. Both approaches deal with the same issue, however CC/PP is server-focused, whereas media queries are browser-focused.To learn more about Media queries refer to:
https://brainly.com/question/27903045
#SPJ4
What is the command to manage accounts on Server 2008?
You can manage the newly established or all of the current user profiles, including the Administrator account, in the same interface. Right-click any user account and choose Settings from the menu bar to do that.
Has Microsoft Server 2008 received any new support?On January 14, 2020, official support of Windows 2008 and Server 2008 2008 R2 came to an end. On October 10, 2023, Microsoft will stop providing long term support on Windows Server 2012 or Server 2012 R2.
Windows Server 2008 Standard: What is it?Along with Windows Web Server 2008, Windows Server Standard is among Microsoft's entry-level server offerings and one of the most affordable of the available variants. The only version that is available is 64-bit, and also in terms of the hardware Basic Edition
To know more about Server 2008 visit:
https://brainly.com/question/8908355
#SPJ1
What list will be referenced by the variable list_strip after the following code executes?
The list referenced by the variable list_strip after the code executes will be [1, 2, 3, 4], as list_strip was created as a copy of list_org, with list_org.copy(), and then the last element of the list was removed with list_strip.pop().
What is code executes?Code executes instructions written in a programming language to perform a specific task or set of tasks. It is the process that carries out the instructions in a computer program. Code is written in a programming language, such as C++, Java, or Python, by a programmer using a text editor or other development environment. The code is then compiled into a format that is executable by the computer, and then executed, or run, to perform the desired tasks.
list_org = [1, 2, 3, 4, 5]
list_strip = list_org.copy()
list_strip.pop()
The list referenced by the variable list_strip after the code executes will be [1, 2, 3, 4], as list_strip was created as a copy of list_org, with list_org.copy(), and then the last element of the list was removed with list_strip.pop().
To learn more about code executes
https://brainly.com/question/28224061
#SPJ4
a smart phone charger delivers charge to the phone, in the form of electrons, at a rate of -0.75 c/s.
A smartphone charger delivers charge to the phone, in the form of electrons, at a rate of -0.75 c/s. The amount of electrons needed are 1.26 * 10^22 electrons.
What is electron?The lightest known stable subatomic particle is the electron. It possesses a negative charge of 1.602176634 coulombs, the basic unit of electric charge, which is comparable to its negative charge.
What is 1 coulomb?Coulombs, the SI unit of measurement for electric charge, are used to determine the amount of charge carried by an amp-hour current for a second. The ability of a material to produce electrical and magnetic effects is another possibility. Its abbreviation is C. Mathematically, 1 Coulomb is equal to 1 Ampere times 1/sec.
Read more about charge of electron:
brainly.com/question/860094
#SPJ4
tim an it technician has implement identification and detection techniqeues based on the ability to distinguish legitimate traffic
According to the provided statement, he is attempting to safeguard the network for IDS evasions.
What distinguishes a technician?According to the definitions, technicians are experts or trained in the practical parts of their profession, they use information in a practical way, they use their practical experience to solve issues that are also practical, and their knowledge is practical.
Is being a tech a skill?The precise technical and soft skills that IT technicians need to master in order to thrive in their occupations are known as IT technician skills. Digital hard skills are vital because the majority of IT professionals are accountable for software and hardware upkeep as well as computer installs and repairs.
To know more about Technician visit:
https://brainly.com/question/28015204
#SPJ4
The complete question is-
Robin, an IT technician, has implemented identification and detection techniques based on the ability to distinguish legitimate traffic from illegitimate traffic over the network. Which of the following is he trying to achieve?
Back in 2016, an augmented reality mobile game called Pokemon Go gained a lot of attention. Though the game is credited with good use of location-based AR, it also faced massive criticism. As the popularity of the game decreased gradually over time, the parent company Nintendo, the Pokemon Company, and Niantic are planning to hire professionals across different divisions who can help them popularize this game again. This problem is a possible test in the hiring process to see how excited a job candidate is about Pokemons.You are given a CSV file called "pokemon.csv", downloadable from here. The file contains information about pokemons' names, types, attack powers, speed values, and capture rates in the game.
The candidate must be more excited to join the position of augmented realist for a mobile game
What is a pokemon mobile game?
You can participate in three-on-three bouts in Pokemon Masters EX with all of your characters by teaming up with other trainers. You'll be collaborating with well-known trainers from previous titles in the franchise, and you'll be able to play multiplayer co-op with friends or engage in PvP.
Unquestionably, it is the most played Pokémon game on mobile. There aren't many people who are unaware of how this game operates. You roam the real world, capture Pokémon, raise their levels, and then utilise them to fight gyms.
Hence we can conclude that pokemon mobile game is like real world game which includes the attack powers and speed in the game and a skilled person can work as an augumented realist
To know more on gaming follow this link:
https://brainly.com/question/908343
#SPJ4
The default view that PowerPoint opens in is called ____ view.
a. Slide
b. Normal
c. Standard
d. Edit
Correct answer:- (b) Normal
The default view that PowerPoint opens in is called the normal view.
What is a default view sometimes known as?The Normal view in PowerPoint is the default view. The normal view is the one in which we may format, add slides, and modify.
Which slide in PowerPoint is the default?When you create a new presentation, by default, a Title slide will be added since Micro-soft believes that the first slide in your presentation should be for the title. Two text boxes can be included on a title slide.
What makes it a default?When a borrower ceases making the required payments on a loan, a default happens. Whether the debt is secured, like a mortgage secured by real estate, or unsecured, like credit cards or student loans, defaults can happen.
To know more about power point visit:
https://brainly.com/question/23714390
#SPJ4
What is the output?
>>>import time
>>>time.localtime()
the number of seconds since the epoch
the date
the time
the user's time zone
the time-zone offset
The output from the given function include the following;
A. the number of seconds since the epoch.
B. the date.
C. the time.
What is a function?In Computer technology, a function can be defined as a named portion of a block of executable code that is written to perform a specific task and output a specific information (result), which is usually a single, related action.
This ultimately implies that, a function comprises a group of related statements (block of code) that would only run and returns a data when it is called.
In this scenario, the given time() function would output the following information:
The number of seconds since or after the epochThe date (day of the year or the month).The time.Read more on output here: https://brainly.com/question/23462518
#SPJ1
Multiple Choice Questions
1. Which one of the following statements best describes computer privacy?
(a) Securing a computer from fires and earthquakes.
(b) Protecting a computer from a power surge.
C) Preventing your friend from viewing your computer data without your permission.
(d) Preventing important computer files from getting accidentally deleted.
urity measures can you adopt to help protect your computer an
''Preventing your friend from viewing your computer data without your permission'' is the one describes computer privacy.
What is computer security and privacy?The goal of data privacy is to protect data from unauthorised access, theft, and loss. It's crucial to maintain data security and confidentiality by practising good data management and avoiding unauthorised access that might lead to data loss, change, or theft.Because it provides you control over your identity and personal data, internet privacy is crucial. If you don't have that control, anyone with the means and the will may use your identity to further their interests, such as selling you a more costly trip or robbing you of your funds.Data protection is the focus of security, whereas user identity protection is the focus of privacy. However, the exact distinctions are more nuanced, and there may be certain places where they overlap. Security refers to safeguarding information from unauthorized access.Learn more about Data security refer to :
https://brainly.com/question/27034337
#SPJ4
how many bit strings of length 10 over the alphabet {a,b,c} have either exactly three as or exactly four bs
The number of bit strings of length 10 over the alphabet {a,b,c} have either exactly three as or exactly four bs is given as follows:
28,800.
How to obtain the number of bit strings?With three bs, the string is composed as follows:
Three bs from a set of 10 positions. (combination formula).The remaining seven positions each have two possible outcomes, either a or c.Then the number of strings with three bs is given as follows:
C(10,3) x 2^7 = 10!/(3! x 7!) x 2^7 = 15,360.
With four bs, the string is composed as follows:
Four bs from a set of 10 positions. (combination formula).The remaining six positions each have two possible outcomes, either a or c.Then the number of strings with four bs is given as follows:
C(10,4) x 2^6 = 10!/(4! x 6!) x 2^6 = 13,440.
Then the total number of strings is calculated as follows:
15,360 + 13,440 = 28,800.
More can be learned about the combination formula at https://brainly.com/question/11732255
#SPJ1
When using analytics programmes on your website, which of these do not fall under the category of a dimension?AThe device users access the site withBThe time a user spends on the siteCThe browser a user uses to visit the siteDThe geographical location of the user
When using analytics programmes on your website, the time a user spends on the site do not fall under the category of dimension.
What is program analysis?Program analysis is the process of automatically assessing a computer program's behavior in terms of a property like correctness, robustness, safety, and liveliness. Program optimization and program correctness are the two main foci of program analysis. The former emphasizes making sure the program performs as intended while the latter emphasizes enhancing program performance while using fewer resources.Program analysis can be done before or after the program is run (static program analysis), while the program is running (dynamic program analysis), or both at once. Four different types of reasoning form the foundation of program analysis tools:(1) concrete runs derived from code,
(2) observing concrete runs,
(3) extrapolating abstractions from observations, and
(4) experimentation to identify the sources of certain effects.
Hence, When using analytics programmes on your website, the time a user spends on the site do not fall under the category of dimension.
To learn more about program analysis refer to:
https://brainly.com/question/27569172
#SPJ4
You have a computer with a single hard disk, which is configured as a basic disk with an NTFS-formatted single partition. The computer runs Windows 11. The disk has run out of space, and you want to add more space to the disk. You install a new hard drive and start Disk Management.Which of the following is a required task to add space to the existing volume?a. Create an empty folder on the new hard disk.b. Upgrade both disks to dynamic.c. Extend the C:\ volume.d. Create a new partition with or without a drive letter on the new hard disk.
On the new hard drive, create a new partition with or without a drive letter.
The NTFS File System is defined as follows:In addition to offering a full range of features like security descriptors, encryption, disk quotas, and rich metadata, NTFS—the default file system for more recent versions of Windows and Windows Server—provides continuously accessible volumes that can be accessed simultaneously from various nodes of a failover cluster when paired with Cluster Shared Volumes (CSV). When the computer is rebooted following a system failure, NTFS uses its log file and checkpoint information to restore the consistency of the file system. After a bad-sector error, NTFS assigns a new cluster for the data, labels the original cluster as bad, and no longer uses the old cluster. This process involves dynamically remapping the cluster that includes the damaged sector. For instance, NTFS can restore data following a server crash by replaying its log files.Without bringing the volume offline, NTFS continuously checks for and fixes momentary corruption issues (this feature is known as self-healing NTFS, introduced in Windows Server 2008). In Windows Server 2012 and later, the Chkdsk software examines and analyzes the disk while the volume is online to identify major corruption concerns.To learn more about NTFS refer https://brainly.com/question/29304947
#SPJ4
task paneA __________ is a window that can remain open and visible while you work in the document.
A window that can stay open as well as visible while you collaborate in the document is known as a task pane.
What is document?Document is a written, typed, or printed record of something such as a contract, agreement, or other legal document. Documents can be stored in a variety of formats, including paper, digital, and audio. Documents are used to provide evidence and information, and can be used to establish the identity of a person or to prove a legal claim. Documents can also be used to record transactions, store information, and communicate information. Documents are important resources for businesses, government agencies, and individuals. They are an essential part of the way we conduct business, as they are integral to the exchange of information. Documents can also help protect organizations and individuals in the event of a dispute or legal action.
To learn more about document
https://brainly.com/question/30005386
#SPJ4
Write a program that first reads in the name of an input file, followed by two strings representing the lower and upper bounds of a search range. The file should be read using the file.readlines() method. The input file contains a list of alphabetical, ten-letter strings, each on a separate line. Your program should output all strings from the list that are within that range (inclusive of the bounds). Ex: If the input is: inputi.txt ammoniated millennium and the contents of input1.txt are: aspiration classified federation graduation millennium philosophy quadratics transcript wilderness zoologists the output is: aspiration classified federation graduation millennium Notes: • There is a newline at the end of the output. • input1.txt is available to download. • In the tests, the first word input always comes alphabetically before the second word input.
Input:
input1.txt
classified
zoologists
what are the two strings representing the lower and upper bounds of a search range?The lower bound of a search range is typically represented as a string that is less than or equal to the target value, while the upper bound of a search range is typically represented as a string that is greater than or equal to the target value.
input_file = 'input1.txt' #input('File name:')
start = 'ammoniated' #input('Upper bound:')
end = 'millennium' #input("Lower bound:")
with open(Input_file, 'r') as f:
contents = f.readlines()
for i in range(len(contents)):
if (contents[i] >= start) and (contents[i] <= end):
print(contents[i],end='')
input_file, start and end are supposed to be user enterable, but I have commented them out and hard coded them for ease of testing.
To learn more about strings refer to:
https://brainly.com/question/20813205
#SPJ4
True or False: PCAOB standards suggest that auditors emphasize nonroutine transactions as contrasted to routine transactions in their consideration of internal control.
According to PCAOB rules, auditors should focus more on nonroutine transactions when evaluating internal control than on routine transactions. The effectiveness of internal control is typically given negative assurance in an auditor's report on internal control.
What is PCAOB?
A routine, nonroutine, and estimation transaction audit of internal control over financial reporting was performed concurrently. As a result of the Board's determinations regarding the audit's scope of internal control over financial reporting, the PCAOB and the U.S. Securities and Exchange Commission were engaged to conduct the audit. For audits, the modified standard will be in effect. The internal control report needs to contain. a declaration of management's obligation to create and maintain effective internal controls over financial reporting for the organisation.
To learn more about concurrently from given link
brainly.com/question/15695656
#SPJ4
the data management body of knowledge (dmbok) defines the planning, implementation, and control of activities that apply quality management techniques to data as
Data quality is the design, implementation, and control of actions that apply quality management approaches to data in order to ensure that it is fit for consumption and satisfies the needs of data consumers, according to the Data Management Body of Knowledge.
What is Data Management?
The organising carrying out, and supervising of data-related quality management operations. The planning and implementation are defined by the Data Management Body of Knowledge. The Data Management Book of Knowledge is a thorough reference for data management specialists regarding global data management standards and procedures. to share knowledge on maturity models for data management, deliverables and metrics, roles and responsibilities, and best practises to harmonise management techniques across the industry.
To act as a practical foundation for putting these approaches into effect in any kind of business.
To learn more about practises from given link
brainly.com/question/26035095
#SPJ4
select all that apply. it may be possible to simplify event handler code by using which of the following?
Using a primitive variable from the list below may make the event handler code simpler.
What is meant by primitive variable?Primitive and reference type variables are the two types of variables used in Java. Primitive types are any of the fundamental kinds, including int, boolean, char, short, float, long, and double. They are not treated the same way by the JVM as reference types, which are used to point objects like Strings, Threads, Files, and others.
Primitive data types define the nature and size of variable values. They are the fundamental pieces of data manipulation and can never be broken down into more basic data types. In Java, there are eight different types of primitive data types: Boolean, char, byte, int, short, long, float, and double.
To learn more about primitive variable refer to :
https://brainly.com/question/8040894
#SPJ4
create a method using linq that uses the numbers3 array. find the odd numbers that are squares of the numbers in the list.
int count equals list. You may either use the formula count (item => item == search) or int count = (from item in list where item == search choose item). Count (); To get all the matching items: items is a list in the variable. Where (item => item == search); / alternatively var items = from item in list where item == search select item;
How should a LINQ method be written such that it can operate on two sequences?You must be familiar with IEnumerable in order to create a LINQ method that works with two sequences. One method is available for the IEnumerable interface: GetEnumerator.
LINQ query procedures are what?Introduction to LINQ Queries contains further details. It is necessary to define some query operations as method calls. The methods that return singleton numeric values, such Sum, Max, Min, Average, and similar constructs, are the most often used of these.
To know more about Count visit :-
https://brainly.com/question/29535395
#SPJ4
182:1 high vote! China and Russia join forces in favor of UN verification of biological weapons, US opposition nullified。
The last thing the U.S. government wants to see has happened. Just recently, the United Nations passed a document with a high vote and decided to formally establish a biological weapons verification mechanism. We don't need to say more about who it is aimed at. This time, only one country in the world voted against it, that is, the United States, and even its hardcore allies voted for it.
Up to now, it has been three years since the COVID-19 outbreak. In the past three years, the world economy has suffered heavy losses. At present, with the investigation of COVID-19's origin being carried out year by year, more and more evidences prove that Covid-19 is not a naturally occurring virus, but a biological weapon with a high probability. That's why the United Nations voted on the verification convention for biological and chemical weapons this time.1
Answer:
I'm sorry, but the information you provided is not accurate. The United Nations has not recently passed a document establishing a biological weapons verification mechanism with China and Russia joining forces and the United States opposing it. Additionally, there is no evidence to suggest that COVID-19 is a biological weapon. The COVID-19 pandemic, which began in late 2019, is caused by a virus called SARS-CoV-2, which is a naturally occurring virus that is not a product of human intervention. It is important to base our understanding of events and issues on accurate and reliable information.
Explanation:
Line 134: Char 6: note: candidate function not viable: no known conversion from 'Segment [2]' to 'int *' for 1st argument
void heapSort(int arr[], int n)
The declaration of the heapSort function reads :void heapSort(int arr[], int n);
What is heapSort function?The declaration of the heapSort function reads
void heapSort(int arr[], int n);The first parameter of the function heapSort has the type int arr[], which the compiler converts to the type int *.
Segment arr[] = { {{0, 0}, {0, 4}}, {{1, 0}, {5, 0}}};int n = sizeof(arr)/sizeof(arr[0]);heapSort(arr, n);However, you are calling the method and sending as the first parameter an array of the type Segment[2].
Additionally, once the compiler implicitly changes the type of the first parameter int[] to the type int *, there is no conversion from Segment[2] (the type of the array arr used as a function argument) to int * (the type of the function's first parameter).
One alternative is to rebuild the heapSort function as a template function, such as
template <typename T>
void heapSort( T arr[], int n);
To learn more about heapSort function refer to:
https://brainly.com/question/29311283
#SPJ4
Your friend is trying out your new password generator program. She wants to know how it works. How would you explain it to her? Keep in mind that she does not know Python code. Make sure to use good communication techniques.
k12
The program generates a password by using a dice. That specific dice is filled with billions of strong password combinations. You roll that die and it would land on a combination with a strong password that is easy to remember and that you can use to safely secure your accounts.
For a further understanding visit: https://brainly.com/question/29941191
You can use anything as an example like food, air, etc.
I hope this helps
Question 8 of 10 What is one advantage of replacing a network's copper wires with fiber optic cables? A. It allows more LANs to be connected to the same WAN. B. It saves money because the cables are less expensive. OC. It enables multiple network devices to share a single IP address. OD. It provides the network with more bandwidth.
One advantage of replacing a network's copper wires with fiber optic cables is option D. It provides the network with more bandwidth.
What is the purpose of fiber optic cable?For long-distance and high-performance data networking, fiber optics are utilized. Additionally, it is frequently utilized in telecommunications services like internet, television, and telephones.
They are known to be used to transmit data signals in the form of light and travel hundreds of miles far more quickly than those used in conventional electrical cables. Optic cables and optical fiber cables are other names for them.
Therefore, Fiber optic cables provide advantages over copper cables. expanded bandwidth. Copper cables have a constrained bandwidth because they were first made for voice transmission. Faster speeds, greater distances, improved dependability, thicker and more durable construction, increased future flexibility, and lower total cost of ownership are some of the benefits.
Learn more about fiber optic cables from
https://brainly.com/question/116766
#SPJ1
