help helphelp it is 90km per hr

Answers

Answer 1

Answer:

Explanation:

The equation for acceleration is

[tex]a=\frac{v_f-v_0}{t}[/tex] which is the final velocity minus the initial velocity divided by the time. I first need to put the units all in the same terms. We have the velocity given as km/hr, but the time is given in seconds and that's not gonna work. I will change the velocity to km/sec:

[tex]90\frac{km}{hr}*\frac{1hr}{3600s}=.025\frac{km}{s}[/tex] That's the value we will use for the final velocity of this car in the equation for acceleration:

[tex]a=\frac{.025-0}{10}=.0025\frac{km}{s^2}[/tex]

The second part of this problem asks how far the car travels in this 10 seconds. We just determined that the car can travel .025 km in 1 second, so in 10 seconds the car travels 10(.025) = .25 km

Related Questions

Use the ideal gas law, PV=nRT to solve. R=0.0821
If I have 15 moles of gas at a temperature of 299K and a volume of 92L, what is the pressure of the gas?

Answers

Answer:

The pressure of the gas=4.002 atm

Explanation:

We are given that

R=0.0821

Number of moles, n=15

Temperature, T=299 K

Volume of gas, V=92 L

We have to find the pressure of the gas.

[tex]PV=nRT[/tex]

Substitute the values

[tex]P\times 92=15\times 0.0821\times 299[/tex]

[tex]P=\frac{15\times 0.0821\times 299}{92}[/tex]

[tex]P=4.002 atm[/tex]

Hence, the pressure of the gas=4.002 atm

Answer:

According to the ideal gas law equation,

PV = nRT (here, P = 5.5 atm, V = 10L, T = 298K, R = 0.0821 atmL/mol K)

or, n = RT/PV = (0.0821 X 298)/(5.5 X 10) = 0.44 moles of He gas

Explanation:

Match the synthetic materials with the processes used to make them.

Answers

we can’t see anything

orange light has a wavelength of 600nm. calculate the frequency if the speed of light in vacuum

Answers

the correct answer is ---- 122

a body is moving along a circular path 'r'. what will be the distance and displacement of the body when it completed half a revolution?

Answers

Answer: Displacement is the shortest distance travelled from the initial point to the final point. After half revolution the displacement is the length of the diameter which is equal to 2r. Hence the displacement is 2r.

After half of a revolution ...

==> Distance = π•r

==> Displacement = 2•r

You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration

Answers

Answer:

the acceleration of the elevator is increasing

Explanation:

For this exercise we propose the solution using Newton's second law

F -W = m a

F = m (g + a)

If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.

A neutral object must have _______________ A. An equal amount of positive and negative charges B. no charges present at all C. more positive than negative charges D. more negative than positive

Answers

Answer:

Explanation:

Consider a question you may not have considered before. Suppose you have a mole of sodium in a container that contains nothing that it will react with. A mole of anything is 6.02 * 10^23 (in this case atoms).

Suppose that every one of those atoms has contributed 1 electron to something.

Do you think it would be safe to touch the container knowing that there are 6.02 * 10^23 positive charges all eager to get another electron, because they don't like repelling each other.

Safe or not? I'll give you a hint. A lightning bolt does not contain anywhere near 6.02*10^23 charges. No where near.

So -- since you never get a shock from just touching anything, There must not be electrons or ions present.

The answer is A

The answer to your question is A

6. traction a. friction between a tire and the road.b. pushes a moving object out of a curve and into a straight linec. the ability of a car to hold a straight lined. a road higher in the center than on either edge 7. kinetic energy a.a force that keeps objects moving in a straightb. reduces the effects of inertiac. energy of motiond. a road higher in the center than on either edge 8. force of impact a. a force that keeps objects moving in a straight line.b. a road higher in the center than on either edgec. the force with which a moving vehicle hits another objectd. perception distance, reaction distance, and braking distance

Answers

Answer:

6. a. friction between a tire and the road

7. c. energy of motion

8. c. the force with which a moving vehicle hits another object

Explanation:

6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.

So, the answer is a

7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.

So, the answer is c

8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.

So, the answer is c.

a ball is thrown straight up into the air while the ball is traveleling upwards what are the magnitue and direction

Answers

Answer: hi your question is incomplete attached below is the complete question

answer :

magnitude of acceleration : | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

The boiling point of a substance is _72 degree Celsius. This temperature will be equivalent to Kelvin scale is-------.

Answers

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

Boiling point = 72°C

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

A wave travels at 330m/s^-1. the wavelength is found to be 2.4m.
Calculate the period of oscillation of a article in the medium transmitting the waves.
The frequency of oscillations of the source transmitting the wave

Answers

Answer: frequency 137.5

Time period 0.01sec

Explanation:

Please answer will mark brainleist

Answers

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases

After landing the aeroplane's momentum becomes zero. Explain how

the law of conservation holds here.

Answers

Answer:

The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.

rainfall occurs on the earth due to effect of gravity

Answers

Answer:

True

Because Gravity is the force of attraction between two objects, and Earth's gravity pulls matter downward, toward its center. It pulls precipitation down from clouds and pulls water downhill. Gravity also moves air and ocean water. ... Gravity pulls denser air and water downward, forcing less dense air and water to move upward.

Carryonlearning

An object 2cm high is placed 3cm in front of a concave lens of focal length 2cm, find the magnification?

Answers

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

a cyclist has a combined mass of 88 kg and a combined weight of 862.4 then accelerates at 1.2m/s after 2 seconds he reaches a of 2.4m/s what is his momentum at this point

Answers

Answer:

shushhhgggvvv vgfxgh

Explanation:

gey laahhg

211.2kg i looked it up

Describe the resistance through a
diode

Answers

Explanation:

A diode is an electrical element which offers the flow of current freely in one direction with very less resistance.

The given figure depicts a diode in forward bias, where the p-side and the n-side of the diode are connected to positive and negative terminals respectively. In such a case the current flows from the p-side to n-side of the p-n junction very easily and the value of the current increases rapidly after a certain voltage, this voltage is called threshold voltage.

We can deduce from the graph that the resistance of the diode reduces with increase in voltage. As resistance is given by the formula:

[tex]R=\frac{V}{i}[/tex]

Calculate surface tension of an enlarged radius of 4cm to 6cm and amount of work necessary for enlargement was 1.5×10^-4 joules

Answers

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

[tex]W=T.dA[/tex]

Therefore

[tex]T=\frac{W}{dr}[/tex]

[tex]T=\frac{1.5*10^{-4}}{2}[/tex]

[tex]T=7.5*10^{-5}[/tex]

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions.

Which is the best analysis of Eli’s statement?

Answers

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

When the E string of a guitar (frequency 330 Hz) is plucked, the sound intensity decreases by a factor of 2 after 4 s. Determine

Answers

Answer:

[tex]Q=50.3[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=330Hz[/tex]

Sound intensity drop [tex]I_d=2[/tex]

Time [tex]T=4s[/tex]

Therefore

Sound intensity Ratio

[tex]\frac{I}{I_x}=\frac{1}{2}[/tex]

Generally the equation for Sound intensity is mathematically given by

[tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]

[tex]\frac{1}{2}=e^{-4\ \=t}[/tex]

[tex]\=t =5.8s[/tex]

Generally the equation for Quality Factor is mathematically given by

[tex]Q=2 \pi\frac{E}{\triangle E}[/tex]

[tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]

[tex]Q=50.3[/tex]

When extrication will involve cutting the roof off a vehicle, stabilization of the vehicle should include:

Answers

Answer:

Deflating the tires by pulling the valve stems

Explanation:

When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.

In a science museum, a 130 kg brass pendulum bob swings at the end of a 14.4 m -long wire. The pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.7 m to the side and releasing it. Because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s. You may want to review (Pages 405 - 407) . Part A At exactly 12:00 noon, how many oscillations will the pendulum have completed

Answers

Answer:

The time in which the pendulum does a complete revolution is called the period of the pendulum.

Remember that the period of a pendulum is written as:

T = 2*pi*√(L/g)

where:

L = length of the pendulum

pi = 3.14

g = 9.8 m/s^2

Here we know that L = 14.4m

Then the period of the pendulum will be:

T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s

So one complete oscillation takes 7.61 seconds.

We know that the pendulum starts moving at 8:00 am

We want to know 12:00 noon, which is four hours after the pendulum starts moving.

So, we want to know how many complete oscillations happen in a timelapse of 4 hours.

Each oscillation takes 7.61 seconds.

The total number of oscillations will be the quotient between the total time (4 hours) and the period.

First we need to write both of these in the same units, we know that 1 hour = 3600 seconds

then:

4 hours = 4*(3600 seconds) = 14,400 s

The total number of oscillations in that time frame is:

N = 14,400s/7.61s = 1,892.25

Rounding to the next whole number, we have:

N = 1,892

The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.

5- Clasifica los siguientes cambios de la materia, anotando delante de cada uno cambio físico (F) o cambio químico (Q): • Disolver azúcar en agua • Freir una chuleta • Arrugar un papel • El proceso de la digestión • Secar la ropa al sol • Congelar una paleta de agua • Hacer un avión de papel • Oxidación del cobre • Romper un lápiz • Prender fuegos artificiales • Excavar un hoyo • Quemar basura

Answers

Answer:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Explanation:

A continuación, veremos que representa cada caso: