Help lol please lol thank you :)

Answer:[tex][Kr]4d^{10}5s^25p^1[/tex]

Explanation:

The element Indium with atomic number 49 will have 49 protons and 49 electrons in it.

Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom. The electrons are filled according to Afbau's rule in order of increasing energies and the nearest noble gas is Krypton with 36 electrons.

The electronic configuration in terms of noble gas configuration is:  

[tex]In:49:[Kr]4d^{10}5s^25p^1[/tex]

The noble-gas notation for the element indium is [Kr} 4d¹⁰5s²5p¹. The correct option is B.  [Kr] 5s2 4d10 5p1

From the question,

We are to write the electron configuration of the element Indium, using the appropriate noble gas notation.

The noble gas that comes before Indium (In) is Krypton (Kr). Therefore, the noble gas that will be used in the notation is Krypton.

Indium has an atomic number of 49 while Krypton has an atomic number of 36. This means we will fill in 13 more electrons.

The electron configuration for the element indium using the noble-gas notation is

[Kr} 4d¹⁰5s²5p¹

Hence, the noble-gas notation for the element indium is [Kr} 4d¹⁰5s²5p¹. The correct option is B.  [Kr] 5s2 4d10 5p1

Learn more here: https://brainly.com/question/4194872

d. Fe(s) and Al(s)

In the redox reaction, it is also known  

Reducing agents are substances that experience oxidation  

Oxidizing agents are substances that experience reduction

The metal activity series is expressed in voltaic series  

Li-K-Ba-Ca-Na-Mg-Al-Mn- (H2O) -Zn-Cr-Fe-Cd-Co-Ni-Sn-Pb- (H) -Cu-Hg-Ag-Pt-Au  

The more to the left, the metal is more reactive (easily release electrons) and the stronger reducing agent  

The more to the right, the metal is less reactive (harder to release electrons) and the stronger oxidizing agent

So that the metal located on the left can push the metal on the right in the redox reaction  

The electrodes which are easier to reduce than hydrogen (H), have E cells = +

The electrodes which are easier to oxidize than hydrogen have a sign E cell = -

So the above metals or metal ions will reduce Pb²⁺ (aq) will be located to the left of the Pb in the voltaic series or which have a more negative E cell value (greater reduction power)

The metal  : d. Fe(s) and Al(s)

Answer:

Dimensional Analysis (also called Factor-Label Method or the Unit Factor Method) is a problem-solving method that uses the fact that any number or expression can be multiplied by one without changing its value. It is a useful technique.

Answer:

1.209g of MgO participates

Explanation:

In this problem, we have 0.030 moles of MgO that participates in a particular reaction.

And we are asked to solve for the mass of MgO that participates, that means, we need to convert moles to grams.

To convert moles to grams we need to use molar mass of the compound:

1 atom of Mg has a molar mass of 24.3g/mol

1 atom of O has a molar mass of 16g/mol

That means molar mass of MgO is 24.3g/mol + 16g/mol = 40.3g/mol

And mass of 0.030 moles of MgO is:

0.030 moles MgO * (40.3g/mol) =

Answer:

6.591

Explanation:

= 6.951 moles

Answer: 8

Explanation:

Answer:

3P2O5:

P:6 O:15

5CO2

C:5 O:10

3C6H12O6

C:18 H:36 O:18

4C6H12

C:24 H:48

3Mg3(PO4)2

Mg:9 P:2 O: 8

4(NH4)2S

N:8 H:32 S:4

Answer:

Water, wind, ice, and gravity

Explanation:

I took the quiz ;)

Answer:

nm

Explanation:

trust me:)

Answer:

Explanation:

Concentration of Cu⁺² = 9.25 x 10³ M

Concentration of Mn⁺² = 1.4 x 10² M

solubility product of copper carbonate = 7.08 x 10⁻⁹

solubility product of manganese  carbonate = 2.24 x 10⁻¹¹

solubility product of later is less so carbonate of manganese will come out first .

B )

[ Mn⁺² ] [ CO₃⁻² ] = 2.24 x 10⁻¹¹

1.4 x 10²  [ CO₃⁻² ] = 2.24 x 10⁻¹¹

[ CO₃⁻² ] = 1.6 x 10⁻¹³ .

the concentration of carbonate ion when this precipitation first begins

= 1.6 x 10⁻¹³ M .

Answer:

[tex]\boxed {\boxed {\sf 8.2 \ grams}}[/tex]

Explanation:

According to the Law of Conservation of Mass, the mass of the products must equal the mass of the reactants.

In this problem, the reaction is:

[tex]iron + oxygen = ferric \ oxygen[/tex]

[tex]10 \ g + oxygen=18.2 \ g[/tex]

We want to find how many grams of oxygen reacted. We have to get the oxygen by itself. 10 is being added to oxygen. The inverse of addition is subtraction. Subtract 10 from both sides of the equation.

[tex]10 \ g - 10 \ g+ oxygen = 18.2 \ g - 10 \ g[/tex]

[tex]oxygen= 18.2 \ g - 10 \ g[/tex]

[tex]oxygen= 8.2 \ g \\[/tex]

8.2 grams of oxygen reacted with 10 grams of iron to form 18.2 grams of ferric oxide.

Explanation:

the object must be at rest

Answer:

Customary

Explanation:

Answer:

Customary

Explanation:

Answer:

D) Fe³⁺, O²⁻; Fe₂O₃

Explanation:

Option D shows correctly an ion pair and the correct formula for the ionic compound the two ions form.

Ion pairs of iron and oxygen react to form iron (III) oxide. The iron (III) oxide is one of the oxides of iron. The compound is usually attacked by acids and it is often called rust. It is used in the feedstock of the steel and iron industries. This means that the compound is used in the production of iron, steel, and many alloys.

Below are some equations:

4 Fe + 3 O₂→ 2 Fe₂O₃

Fe⁰ + 3O₂⁰ →  Fe³⁺O₃²⁻

Answer:

[tex]m_{Fe_2O_3}=160.41gFe_2O_3[/tex]

Explanation:

Hello!

In this case, since the reaction between aluminum and iron (III) oxide is:

[tex]2Al+Fe_2O_3\rightarrow Al_2O_3+2Fe[/tex]

In such way, since there is 2:1 mole ratio between aluminum (atomic mass = 26.98 g/mol) and iron (III) oxide (molar mass = 159.70 g/mol), we'll be able to compute the mass of the required reactant as shown below:

[tex]m_{Fe_2O_3}=54.2gAl*\frac{1molAl}{26.98gAl}* \frac{1molFe_2O_3}{2molAl}*\frac{159.70gFe_2O_3}{1molFe_2O_3}\\\\m_{Fe_2O_3}=160.41gFe_2O_3[/tex]

Best regards!

Answer:

Explanation:

The new pressure can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we are finding the new pressure

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

From the question

760 mmHg = 1 atm

380 mmHg = 0.5 atm

We have

[tex]P_2 = \frac{0.5 \times 5}{8} \\ = 0.3125[/tex]

We have the final answer as

Hope this helps you

Answer: A single replacement reaction looks sort of like this

A + BC —> AC + B

Explanation: It would be a LOT more helpful for us if you had provided the answer choices for this question, but I'll try to help by explaining WHAT single-replacement reactions are.

Single-replacement reactions are reactions in which one ion displaces another to form a new compound . One reactant is an element; one reactant is a compound . One product is an element; one product is a compound . The reactant element is part of the compound product .

I hope this helped!

Answer:

Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.

The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.

Explanation:

Answer:

Atoms form chemical bonds to achieve a full outer energy level, which is the most stable arrangement of electrons. A chemical bond is a force of attraction between atoms or ions. Bonds form when atoms share or transfer valence electrons. In a covalent bond, two atoms share one or more electrons.

Answer:

292.7 g

Explanation:

Note: the reaction is missing but I looked it up on the web and found it.

Step 1: Write the balanced equation

CuSO₄(aq) + 2 NaOH(aq) → Cu(OH)₂(s) + Na₂SO₄(aq)

Step 2: Calculate the moles corresponding to 240.0 g of NaOH

The molar mass of NaOH is 40.00 g/mol.

240.0 g × 1 mol/40.00 g = 6.000 mol

Step 3: Calculate the moles of Cu(OH)₂ formed from 6.000 moles of NaOH

The molar ratio of NaOH to Cu(OH)₂ is 2:1. The moles of Cu(OH)₂ formed are 1/2 × 6.000 mol = 3.000 mol.

Step 4: Calculate the mass corresponding to 3.000 moles of Cu(OH)₂

The molar mass of Cu(OH)₂ is 97.56 g/mol.

3.000 mol × 97.56 g/mol = 292.7 g

Answer:Since dinosaurs are thought to be over 65 million years old, the news is stunning - and more than some could tolerate.  After the AOGS-AGU conference in Singapore, the abstract was removed from the conference website by two chairmen because they could not accept the findings.  Unwilling to challenge the data openly, they erased the report from public view without a word to the authors.  When the authors inquired, they received this letter:

Explanation:

i do not own my copyrights

Answer:

It's called a subscript.

Explanation:

Subscripts tell you how many atoms of an element are in a compound.

Answer:

I don't know

Explanation:

just wanna talk because I am getting bored.

Answer:

B)

takes mechanical energy and makes it electrical

Explanation:

The volume at STP is 12.9L.

Possible symptoms include shortness of breath (difficulty breathing), a new or worsening cough, pain or tightness in the chest, hoarseness, or trouble swallowing. If you smoke and you know you've been exposed to high levels of radon, it's very important to quit smoking.

It comes from the natural decay of uranium which is determined in nearly all soils. It typically moves up via the floor to the air above and into your private home through cracks and other holes in the basis. your home traps radon inner, which it is able to build up.

Learn more about Radon gas at https://brainly.com/question/1121893

#SPJ2

Answer:

.

Explanation:

Answer:

the change in internal energy of the gases is  -3.0924 KJ

Explanation:

The computation of the change in internal energy of the gases is as follows;

Given that

Q = -3.1 KJ

= -3100 J

It is negative as the heat is lost from the mixture

And,

W = + 7.6 J

It is positive as the work is done in the mixture

Now we use the following equation

Delat E = Q + W

= -3100 J + 7.6 J

= -3092.4 J

= -3.0924 KJ

Hence, the change in internal energy of the gases is  -3.0924 KJ

Answer:

Sulfur

Explanation:

The first ten electrons of the sodium atom are the inner-shell electrons and the configuration of just those ten electrons is exactly the same as the configuration of the element neon (Z = 10).

...

Noble Gas Configurations.

Element Name Sulfur

Symbol S

Atomic Number 16

Noble Gas Electron Configuration [Ne]3s23p4

Answer:

Explanation:

There are 2.