Answer:
A atmospheric composition
define specific heat capacity
Help me I got this photo please
Answer:
Carbon Sink- photosythesis, ocean absorption, fossilization
Carbon Source- combustion, respiration
Explanation:
You slide a 15 kg box down a ramp with friction set to an angle of 38°. If the height of the ramp is 1.2 m, what's the frictional force on the box as it gets to the bottom of the ramp if the applied force down the ramp is 52 N?
Answer:
38.75N
Explanation:
According to Newton's second law
\sum Fx = ma
Fm-Ff = ma
Fm is the moving force
Fm = mgsin theta
Fm = 15(9.8)sin38
Fm = 90.5N
Ff is the frictional force
m is the mass = 15kg
a is two acceleration
Get the acceleration
a= F/m
a = 52/15
a ,= 3.45m/s²
Substitute the given values into the formula
90.5-Ff = 15(3.45)
90.5-Ff = 51.75
Ff = 90.5-51.75
Ff = 38.75N
Hence the frictional force on the box is 38.75N
Velocities of two bodies A and B are given in vectors notation as va =i+2j-3k and Vb=3i+2j-k what will be the relative velocity of b with respect to a?
Answer:
[tex]V_{B/A}=2i+2k[/tex]
Explanation:
The relative velocity can be calculated by means of the difference between vector B minus vector A.
[tex]V_{A}=i+2j-3k\\V_{B}=3i+2j-k\\V_{B}-V_{A}=(3-1)i + (2-2)j+(-1-(-3))k\\V_{B/A}=2i+2k[/tex]
find the cp of an article which is sold for rupees 4048 , thereby , making a profit of 15 percent
Answer:
4048 = 115x/100.
Explanation:
Profit P = (15/100) X x.
P= 15x/100.
15x/100 = 4048- x.
4048 = 15x/100 + x.
4048 = 115x/100.
HELLLPPPPPPPPPPPPPPPPPP
Answer:
If you going to ask a question ask it accurately.
Explanation:
Have you ever noticed that how much electrical energy is consumed by electrical appliances in your home. Make a chart of all of these appliances with their power in kW and an average use on daily, weekly, and monthly basis. Usually the electrical power is written on most of the appliances or on their packing. Calculate the total consumption of electrical energy in kWh in your home for December, 2020. Find the expected electricity bill for this month, if 1 kWh energy costs Rs 10. Which item consumed most energy during the month
Answer:
A. The expected electricity bill for this month is Rs 18,896.2
B. The item which consumed the most energy during the month is the electric cooker with a total consumption of 1,110Kw/Month
Explanation:
Step 1 - Identify electrical appliances
I only have 8 electrical appliances in my home.
Electric Cooker. Its power rating 3000 Watts (that is 3Kw/h)Refrigerator. Its power rating is 150 Watts (that is 0.15Kw/h)Waterheater. Its power rating is 4000 Watts (that is 4Kw/h)Electric Iron. Its power rating is 1000 Watts (that is 1Kw/h)Led TV. Its power rating is 235 watts (that is 0.235Kw/h)13 Energy-saving Light bulbs at 60 watts which is a total of 780 watts (which is 0.78Kw)Electric Standing Fan. Its power rating is 55 watts (that is 0.055Kw)Washing machine. Its power rating 255 watts (that is 0.255Kw)Step 2 - Assign usage per hour and calculate wattage used /month
The Electric Cooker is used an average of 9 hours/day. This is 270hours/month. Total Kw used per month 3Kw * 270hours = 1,110Kw/MonthThe refrigerator is used 24 hours. That is 0.15Kw *24*30days= 108Kw/MonthThe water heater is used 1 hour every day. That is 4Kw *30days = 120Kw/MonthThe electric Iron is used for 20 Minutes every day.That is 1Kw * 0.34hr *30= 10Kw/MonthThe Led Tv is used for 12hours/day. That is 0.235Kw*12*30=84.6Kw/monthThe bulbs are used for about 18hours/day. That is 0.78kw*18*30= 421.2Kw/monthThe electric standing fan is used for about 18 hours/day. That is 0.055kw*18*30=29.7Kw/monthThe washing machine is used for about 6 hours/week. That is 0.255Kw*4*6=6.12Kw/month
Step 3 - Add up all the Kw used per month and multiply by the cost of 1 Kw
Total Kilowatt Consumed/Month = 1110 +108+120+10+84.6+421.2+29.7+6.12
= 1,889.62Kw/Month
Total cost of energy consumed per month = 1889.62 * Rs 10
= Rs 18,896.2
Cheers!
What state of matter can easily be compressed (squeezed into a much smaller space)? *
gases
solids
solids, liquids, and gases
liquids
Answer:
gases.
Explanation:
gases have the highest volume. if you compress (increase pressure) a gas, the volume decreases and it will take up less space as a liquid, and if you compress more, the liquid will become a solid.
additionally info: this is generally true, but as you get into more difficult subjects, this rule does not hold. for example, some substances cannot obtain a certain phase of matter when they are a certain temperature and or pressure. but that could be way more out of this questions league.
1. Atmospheric pressure increases with
increasing altitude
increasing temperature
increasing humidity
ki
all of the other choice
Answer:
B. Increasing temperature.
Explanation:
Atmospheric pressure increases with increasing temperature because warm air causes the atmospheric pressure to rise.
Basically, when the molecules contained in air experience a collision, they usually exert forces on one other, and when these molecules become heated, they experience a quick and rapid motion leading to an increased rate of collision. Therefore, as more force is being exerted on the air molecules, the atmospheric pressure tends to rise or increase.
What must happen to an object in order to accelerate it?
Answer:
For an object to accelerate, appropriate force must be applied to the object to cause it to change it’s velocity if it’s already in motion. However, to cause it to overcome static friction if it is at rest, and cause it to change it’s velocity
Explanation:
How much potassium nitrate (KNO3) would dissolve in 50 milliliters of water at 45ºC given that 55g of KNO3 is dissolved in 150mL of water at 45°C.
A. 19.7g
B. 15.1g
C. 18.3g
D. 23.3g
you have boasted to your friends that you can ride your bicycle at 30 KPH (KM per Hour) over a 30KM race track comprising of two 15km laps. However, when you finish the first lap, your coach tells you that your average is only 15 KPH. How fast must you ride to bring your average speed to 30 kph.
Answer:
faster than 100 kph
Explanation:
Time taken to complete the first lap is
[tex]\dfrac{15\ \text{km}}{15\ \text{kph}}=1\ \text{hour}[/tex]
If the person's average speed is to be 30 kph then the complete race would be over in [tex]\dfrac{30}{30}=1\ \text{hour}[/tex]
But 1 hour has passed in the first lap already so, the next 15 km must be covered in 0 time.
So, the speed of the bike must be more than 100 kph.
Compare between Convex lens and concave lens
Answer:
A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses.
A softball and a baseball are launched from 2 different pitching machines at the same time.
th
Softball
182 g
165 m/sec
Baseball
143 g
112 m/sec
Which of these BEST explains what factors give the baseball and softball different velocities?
O mass and speed
O mass and direction
O speed and direction
O size and mass
Intensitatea curentului electric a unui circuit este de 123A iar sarcina electrica este de 1,7C sa se afle intervalul de timp in care este transportata sarcina electrica
The intensity of the electric current of a circuit is 123A and the electric charge is 1.7C to find the time interval in which the electric charge is transported.
Given that,
Current, I = 123 A
Electric charge, q = 1.7 C
To find,
The time interval in which the charge is transported.
Solution,
The electric current is given by electric charge per unit time. So,
[tex]I=\dfrac{q}{t}\\\\t=\dfrac{q}{I}\\\\t=\dfrac{1.7}{123}\\\\t=0.0138\ s[/tex]
So, the required time is 0.0138 seconds.
which unit would be most
suitable for its scale?
Answer:
down below
Explanation:
for a scale, kg is used, as well as grams
for force, newtons is used
Why does a concave lense always form a virtual image?
Answer:
Concave lens spreads out light rays that are then refracted through it.: A concave mirror or a converging lens will only produce a virtual image at a point if the image is located beyond the focal point. By the focal point, we define the point that is more than one focal length away.
A 5 kg ball of clay is moving with a speed of 25 m/s directly toward a 10 kg ball of clay which is at rest. The two clay balls collide and stick together. What is their velocity immediately after the collision?
Answer:
8.3m/s
Explanation:
Given parameters:
mass of clay ball = 5kg
Speed of clay ball = 25m/s
mass of clay ball at rest = 10kg
speed of clay ball at rest = 0m/s
Unknown:
Velocity after collision = ?
Solution:
Since the balls stick together, this is an inelastic collision:
m1v1 + m2v2 = v(m1 + m2)
5(25) + 10(0) = v (5 + 10)
125 = 15v
v = 8.3m/s
what happens if I increase the height of a skater
Answer:
The higher the skater is the more potential energy he has. As his height decreases, his potential energy decreases and his kinetic energy increases.
Explanation:
Make me BRAINLIST please
Answer:
The higher the skater is the more potential energy he has. As his height decreases, his potential energy decreases, and his kinetic energy increases. ... Explore how the skater's change in speed relates to the potential and kinetic energy of the skater.
Explanation:
(Via Uteach)
The difference between temperature and thermal energy is that___________.
Answer:
Heat vs temperature - Energy Education The core difference is that heat deals with thermal energy, whereas temperature is more concerned with molecular kinetic energy. Heat is the transfer of thermal energy, whereas temperature is a property the object exhibits.
Starting from rest, a sprinter reaches his top velocity in 3 seconds. He runs a distance of 24m in 3 seconds. What is his acceleration? (Assume his acceleration is uniform)
Answer:
[tex]a=5.34\ m/s^2[/tex]
Explanation:
Given that,
Initial velocity of a sprinter, u = 0
He runs a distance of 24m in 3 seconds.
We need to find his acceleration. Let a be his acceleration. Using second equation of kinematics to find it.
[tex]s=ut+\dfrac{1}{2}at^2\\\\24=0+\dfrac{1}{2}a(3)^2\\\\a=\dfrac{24\times 2}{9}\\\\a=5.34\ m/s^2[/tex]
So, the acceleration of the sprinter is [tex]5.34\ m/s^2[/tex].
The acceleration of the sprinter from rest to his top speed is 5.33m/s²,
Given the data in the question
Since the sprinter starts from rest,
Initial velocity; [tex]u = 0[/tex]Time taken; [tex]t = 3s[/tex]Distance covered; [tex]s = 24m[/tex]Acceleration; [tex]a = \ ?[/tex]
To determine the acceleration of the sprinter, we use the second equation of motion:
[tex]s = ut + \frac{1}{2}at^2[/tex]
Where s is distance covered, u is initial velocity, a is acceleration and t is time.
We substitute our given values into the equation
[tex]24m = [0 * 3s] + [\frac{1}{2} * a * (3s)^2]\\\\24m = \frac{1}{2} * a * 9s^2\\\\24m = a * 4.5s^2\\\\a = \frac{24m}{4.5s^2} \\\\a = 5.33m/s^2[/tex]
Therefore, the acceleration of the sprinter from rest to his top speed is 5.33m/s²
Learn more: https://brainly.com/question/18835025
The two blocks shown below have masses m1 = 400 g and m2 = 600 g. They are connected by a string and lie on a frictionless tabletop. A 3.5 N force is applied to block m2, pulling it to the right. Find the acceleration then find the tension force in the string between two objects
A problem at work must be handled the same way as a personal conflict.
Please select the best answer from the choices provided.
ОТ
F
Answer:T
Explanation:
i feel like it doesn't have enough info
10 POINTS QUESTION: Why both are models for monomers, polymers, and cross-linked polymers
Answer:
Because both monomers and polymers and cross linked polymers are mers with physically properties which is good for applycations
Explanation:
because they are good for using and not using
also, this is a 5 point question, you are not fooling anyone. thx for 5 points tho
If an oceanic plate and a continent plate converge, or push towards each other, which plate will sink under the other one?
Answer:
The oceanic plate will sink under
Explanation:
Due to erosion over time and the sudden shift, the continental plate will rise causing earthquakes, tsunami’s, etc..
Look at the atoms below
a. Atom W: 9 protons and 9 neutrons
b. Atom X: 8 protons and 9 neutrons
c. Atom Y: 9 protons and 9 neutrons
d. Atom Z: 9 protons and 10 neutrons
Which ones below are isotopes of each other and why?
element z are isotopes because number of netron are different and number of protons are same
Is work being done on a barbell when a weight lifter is holding the barbell
over his head?
Answer:
Because in order for work to be done on an object, the object must be moving. Why isn't work being done on a barbell when a weight lifter is holding the barbell over his head? Work is maximized when force is applied in the same direction that the object is moving. ... In order to do work faster, more_is required.
The answer to a multiplication problem is called the?
Answer:
product
Explanation:
Answer:
product
Explanation:
You find the product when you multiply two or any number of factors.
Jack and Jill decide to run a race. Jack weighs 90 kg and Jill weighs 50 kg. At the end of the race it was decided that Jack and Jill tied so they had the same speed. Which person had more momentum ?
Answer: Jack.
Explanation:
Momentum is defined as the quantity of motion.
For an object that has a mass M, and a velocity V, the momentum is written as:
P = M*V
For this problem, we know that Jack and Jill had the same speed (so they had the same velocity), let's say that this velocity is v.
Then the momentum of Jack will be:
P = 90kg*v
And the momentum of Jill will be:
P = 50kg*v
We can see that Jack will have a larger momentum, and this is because he has a larger mass than Jill, but the same velocity as her.
I think this is physics?
A student wants to calculate the density of the two objects shown below:
A Metal Cube and a Small Statue.
Describe the methods that the student should use to calculate the densities of the two objects.
ASAP please this piece of work is already late XD
Answer:
Okay
Explanation:
First we should quickly remind ourselves of the equation for density:density= mass/ volumeTo calculate the density we need a method of measuring the mass of each object and another method for measuring the volume of each object. To measure the mass in both cases we can simply use a measuring balance. To measure the volume we will need to use 2 separate methods. For the cube we can simply measure the length, height and depth with a ruler, multiply our measurements and we obtain the volume. The statue is a little more tricky because it has an irregular shape so we can't use the ruler anymore. Instead we should use graduated tank/trough of water. First of all measure the amount of water in the tank before putting in the statue. Then submerge the statue in the water and take another measurement of the volume of water in the tank. The statue will displace the water in the tank giving a higher value. We finally subtract the initial volume from the final volume and we should obtain the volume of the statue.We now have all the measurements necessary to calculate the density of both objects!
