HELP ME
Which two changes to the can opener would increase its mechanical efficiency?
A shorten the paddle so that they are closer in size to the axle that they turn
B grease the rotating wheel of the opener so that there is less breaks in between moving parts
C replaced it with a straight handle the act as levers with shorter pieces of metal
D sand the cutting surface of the metal piece so that it is perfectly smooth and sharp

Answer:

A flower emits only visible light

A flower reflects much of the light that hits it

Answer:

Final volume, V2 = 3 Litres

Explanation:

Given the following data;

Initial volume, V1 = 1 litre

Initial temperature, T1 = 20°C

Final temperature, T2 = 60°C

To find the final volume, we would use Charles' law;

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

V1/T1 = V2/T2

Making V2 as the subject formula, we have;

V1T2 = V2T1

V2 = (V1T2)/T1

Substituting into the formula, we have;

V2 = (1 * 60)/20

V2 = 60/20

Final volume, V2 = 3 Litres

Answer:

C. C

Explanation:

A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.

In Science, there are two (2) types of wave and these include;

I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.

II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.

A crest can be defined as the highest (vertically) point on a waveform.

On a related note, a trough is the lowest (vertically) on a waveform.

An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest. Thus, the vertical axis (y-axis) is the amplitude of a waveform i.e it's measured vertically.

In this scenario, waveform C which is represented by a blue curvy line has the smallest amplitude in comparison with the other waveforms because it has the minimum height when measured from the origin.

In contrast, waveform A represented by a purple line has the highest amplitude because it has the maximum height when measured from the origin.

Mathematically, the amplitude of a wave is given by the formula;

x = Asin(ωt + ϕ)

Where;

Answer:

The answer is indeed D as the comment above suggests.

Explanation:

Simply put, wave D's highest point is closer to the line than all of the other high points of A, B and C

Answer:

1. These lines are addressed to Duke.

2. These lines show that Shylock is not willing to forgive the debt a merchant owes him, nor is he willing to justify why he demands that debt be paid, even if it seems cruel.

3. He swore by the Holy Sabbath, which is a holy day for him, who is a Jew. He swore he would get the debt money or a piece of the debtor's flesh.

Explanation:

The lines shown in the question above refer to "The Merchant of Venice" written by Shakespeare. In this story we are introduced to Antonio, a commercial who is very prejudiced against Jews, but when he needs money, he borrows from another merchant, Shylock, who is Jewish. Shylock agrees to lend money to Antonio, but determines the date that this money must be returned, in addition, Shylock states that he will lend the money if Antonio agrees that if this money is not paid by the specified date, Antonio will have to pay with half a kilo of flesh from his own body. Antonio agrees, but doesn't pay the money so Shylock goes after the flesh of Antonio's body and Duke tries to intervene because he thinks this is too cruel. At this point, Shylock speaks the lines shown in the question above, showing that he is not willing to change his mind.

Answer:

B

Explanation:

Eff = output work/input work ×100

Hence, Eff = 10000/12000 × 100

Eff = 83.3%

Answer:

The maximum height reached is 413.27 m.

Explanation:

How long will it take for a body to reach its maximum height, knowing that it was thrown, vertically upwards, with a velocity whose value was 90 m / s?

initial velocity , u = 90 m/s

gravity, g = 9.8 m/s^2

Let the maximum height is h.

At maximum height the velocity v = 0

Use third equation of motion

[tex]v^2 = u^2 - 2 gh\\\\0 = 90\times 90 - 2 \times 9.8 \times h\\\\h = 413.27 m[/tex]

Answer:

900 windings

Explanation:

Applying,

Vs/Vp = Ns/Np............. Equation 1

Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit

make Ns the subject of the equation

Ns = VsNp/Vp........... Equation 2

From the question,

Given: Vs = 240 V, Np = 300 windings, Vp  = 80 V

Substitute these values into equation 2

Ns = (240×300)/80

Ns = 900 windings

Answer:

The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.

Answer:

1028 slits/mm

Explanation:

We are given that

Wavelength of light, [tex]\lambda=530nm=530\times 10^{-9} m[/tex]

1nm=[tex]10^{-9} m[/tex]

[tex]\theta=33^{\circ}[/tex]

n=1

We have to find the number of slits per mm are marked on the grating.

We know that

[tex]dsin\theta=n\lambda[/tex]

Using the formula

[tex]dsin33^{\circ}=1\times 530\times 10^{-9}[/tex]

[tex]d=\frac{530\times 10^{-9}}{sin33^{\circ}}[/tex]

[tex]d=9.731\times 10^{-7} m[/tex]

1m=[tex]10^{3}mm[/tex]

[tex]d=9.731\times 10^{-7}\times 10^3[/tex]mm

[tex]d=0.0009731mm[/tex]

Number of slits=[tex]\frac{1}{d}[/tex]

Number of slits=[tex]\frac{1}{0.0009731}[/tex]/mm

Number of slits=1028/mm

Hence, 1028 slits/mm are marked on the grating.

Answer:

1027.6 lines per mm.

Explanation:

wavelength = 530 nm

order, m= 1

Angle = 33 degree

Let the slits per mm is 1/d.

So,

[tex]m \lambda = d sin A\\\\1\times 530\times 10^{-6} = d sin 33\\\\\frac{1}{d} = 1027.6 lines per mm[/tex]

Answer:

5.66 m

Explanation:

From online sources, the speed in item 3 being referred to was discovered to be 7.62 m/s

Now, let's get the time of flight from one of Newton's equation of motion;

S = ut + ½gt²

Considering the vertical component, we have u = 0 m/s.

Thus;.

S = ½gt²

Plugging in the relevant values;

2.7 = ½ × 9.8 × t²

t² = 2.7/4.9

t = √(2.7/4.9)

t = 0.7423 s

Now, when we consider the horizontal component of the motion, we have;

S = vt

Where;

S is the distance the fish will travel horizontally before hitting the water.

v = 7.62 m/s

t = 0.7423

Thus

s = 7.62 × 0.7423

s ≈ 5.66 m

9514 1404 393

Answer:

  R/n

Explanation:

For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...

  Reff = V/I = V/(nV/R)

  Reff = R/n

Answer:

physical measurement comprises the measurement of objects, things, etc. and is concerned with the measurement of height, weight, length, size, volume etc.

Answer:

Q = Q

mcT = ml

100 x 4.2 x 25 = (50-18) l

l = 328

*Hope it helps*

The specific latent heat of fusion of the melted ice is 328.13 J/kg.

The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;

Heat lost by the water = Heat gained by the ice

McΔθ = mL

where;

(100)(4.2)(25) = (32)L

32L = 10500

L = 328.13 J/kg

Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.

Learn more about heat capacity here: https://brainly.com/question/16559442

Answer: Symbol is I and unit A

Explanation: A represents Amperes

HOPE THIS HELPS!!!!!!!!

Answer:

The image is formed at 0.44 m in front of the mirror

magnification (M) = 0.44

Explanation:

Applying, mirror formular

1/f = (1/u)+(1/v).................... Equation 1

Where f = Focal length of the convex mirror, u = object distance, v = image distance.

Using the real is positive convection,

From the question,

Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m

Substitute these values into equation 1

-1/0.8 = (1/v)+(1/1)

Solve for v

1/v = 1.25+1

1/v = 2.25

v = 1/2.25

v = 0.44 m

Hence the image is formed at 0.44 m in front of the mirror

Magnification (M) = v/u

m = 0.44/1

m = 0.44

Magnetic force between the north poles of two magnets is REPULSIVE

Answer:Repulsion or attraction

Explanation:The angle between the compass needle   and geographic north is called the MAGNETIC DECLINATION.(see earth:the magnetic field of the earth ). The repulsion or attraction between two magnetic dipoles can be viewed as the interaction of one dipole with the magnetic field produced by other dipole.

Answer:

The weight of the probe is 50 Newtons

Explanation:

Newtons second law states that F = ma

Given the mass of 25kg, and the acceleration of 2m/s^2, we can substitute both values into the equation to find the weight force.

[tex]F = ma[/tex]

[tex]F = 25 * 2[/tex]

[tex]F = 50N[/tex]

The weight of the probe is 50 Newtons

Answer:

:) :::::::::::::::::::::::::::::::))))

Answer:

55

Explanation:95-40=55

i hope i did the math right if i didnt please tell me

Answer:

Explained below

Explanation:

Generally speaking, we know in physics that Electric field lines are lines which usually start at positive charges and deflect away from them to terminate at the negative charges. Meanwhile Equipotential lines are lines that are used to connect points located on the same electric potential.

Finally, in conclusion, electric field lines are usually lines that go through in a perpendicular manner across every equipotential lines.

Answer:

The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.

I hope it helps

$ \large\boxed{ \sf \red{More ~Info :}}$

The units of supplementary quantities are dimensionless units.

[tex] \\ [/tex]

Answer:

a. i. 35.96 μC  b. i. 11.98 μC ii. 24.04 μC

Explanation:

We need to find the total capacitance of the system C.

The total capacitance of the parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is C' = 1.47 μF + 2.95 μF = 4.42 μF.

C' = 4.42 μF is in series with the 4.89 μF capacitor and for a series combination of capacitors, we have the total capacitance, C from

1/C = 1/4.42 μF + 1/4.89 μF

1/C = (4.42 μF + 4.89 μF)/(4.42 μF × 4.89 μF)

1/C = 9.31 μF/21.6138 μF²

C = 21.6138/9.31 μF

C = 2.32 μF

So, the total charge in the circuit Q = CV where C = total capacitance = 2.32 μF and v = voltage = 15.5 V

So, Q = CV

Q = 2.32 μF × 15.5 V

Q = 35.96 μC

i. The charge on the 4.89 μF capacitor

Since the 4.89 μF is in series with C', the total charge flowing i the circuit is the total charge in the 4.89 μF capacitor. So, its charge Q = 35.96 μC

b. The charge in the 1.47 μF and 2.95 μF capacitors.

To find the charge in the 4.89 μF and 2.95 μF capacitors, we need to find the voltage across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor. The voltage, V' across the 4.89 μF capacitor, since Q = CV', V' = Q/C = 35.96 μC/4.89 μF = 7.35 V

So, the voltage V" across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor, C' is V" = 15.5 V - V' (since V' + V" = 15.5 V).

So, V" = 15.5 V - V'

V" = 15.5 V - 7.35 V

V" = 8.15 V

i. The charge on the 1.47 μF capacitor

Using Q' = CV" where Q' = charge across capacitor, C = 1.47 μF and V" = 8.15 V.

So, Q' = CV"

Q' = 1.47 μF × 8.15 V

Q' = 11.98 μC

ii. The charge on the 2.95 μF capacitor

Using Q" = CV" where Q' = charge across capacitor, C = 2.95 μF and V" = 8.15 V.

So, Q" = CV"

Q" = 2.95 μF × 8.15 V

Q" = 24.04 μC

Answer:

The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.

Answer:

C.

Explanation:

Force = Mass * Acceleration

So 20 = 5* Acceleration

4 = Acceleration

The acceleration of the object is 4 m/s².

To find the acceleration, the given values are:

Force = 20 N

Mass = 5 kg

Definition:

     As it was given as the values of  Force and mass, here acceleration definition depends on the Newton's second law of motion.

Using the second law of motion, the force will be equal to the product of the mass and the acceleration.

As formula,

                               F = ma Newton

Here, to find acceleration,

                              a =f/ m

Substituting the values,

                              = 20 / 5

                            a = 4m/s².

So, the acceleration was 4 m/s². The Option C is the correct answer.

Learn more about acceleration,

https://brainly.com/question/12550364

#SPJ6

Answer:

6.9 m/s

Explanation:

1000m = 1km

3600s = 1hr

25000m/3600s

6.9m/s

Answer:

Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms

Hope this helps ☆*:. o(≧▽≦)o .:*☆