Answers
Answer:
5. Element J has the highest atomic number
6. Elements G and L have the same number of electrons in their outermost shell.
Explanation:
The periodic table of elements is a table which shows the arrangement of the elements in the order of increasing atomic number. Starting from the topmost left-hand side of the table where the element with the least atomic number is placed, and going across the table from left to right and down to the lowest point to the right of the table, where the element with the highest atomic number is located, the atomic number of elements progressively increases.
Looking at the table, it can be seen that the element J is found at the lowest point to the right of the table. Therefore, element J has the highest atomic atomic number.
6. In the periodic table, elements are arranged into groups and periods. The groups are the columns while the periods are the rows. Elements in the same column or group have the same number of electrons in their outermost shell. Therefore, element G and L have the same number of electrons in their outermost shell.
Related Questions
What is the product(s) of the reaction below?
2Al(s) + Fe2O3(s) ---> Al2O3(s) + 2Fe(s)
A. Solid aluminum oxide and solid iron
B. Solid aluminum
C. Saturated aluminum oxide and saturated iron
D. Iron(III) oxide and aluminum oxide
Answers
Answer:
A. Solid aluminum oxide and solid iron
Explanation:
The reaction equation is given as:
2Al + Fe₂O₃ → Al₂O₃ + 2Fe
The species on the left hand side are the reactants
Those on the right hand side of the expression are the products.
The products are:
Al₂O₃ and Fe
These are solid aluminum oxide and solid iron
a sample of methane gas at a pressure of 0.727 atm and a temperature of 26.9 occupies a volume of 726 ml. if the gas is allowed to expand at constant temperature until its pressure is 0.412 atm, the volume of the gas sample will be _ mL
Answers
Answer:
1280L
Explanation:
Given parameters:
Initial pressure = 0.727atm
Temperature = 26.9°C
Initial volume = 726mL = 0.726L
New pressure = 0.412atm
Unknown:
New volume of the gas sample = ?
Solution:
To solve this problem, we apply boyles law;
P1V1 = P2V2
P and V are pressure and temperature
1 and 2 are initial and new state
0.727 x 0.726 = 0.412 x V2
V2 = 1.28mL = 1280L
Describe how an adaptation may have allowed giraffes to survive in savanna ecosystems
Answers
how many element are there on the periodic table?
Answers
Answer:118
Explanation: it’s right
Answer:
118 elements
Hope that helps
___co+__ Na2s--> ___ Na+ ___ cos2
Answers
Answer: [tex]Co+2Na_2S\rightarrow 4Na+CoS_2[/tex]
Explanation:
According to law of conservation of mass, mass can neither be created nor be destroyed. The atoms on the reactant side must be equal to the number of atoms on the product side so that the mass remains the same on reactant and product side. Thus the reactions are balanced.
Single displacement reaction is one where a more reactive element replaces the lesser reactive one.
The balanced chemical reaction will be:
[tex]Co+2Na_2S\rightarrow 4Na+CoS_2[/tex]
. The kidneys are _______________ to the liver.
a. Dorsal
b. Ventral
c. Medial
d. Superior
Answers
Calculate the molar mass of NaNO3-
Answers
how can balancing equations support the law of conservation
Answers
Answer:
detail is given below.
Explanation:
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
Law of conservation of mass:
According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
For example:
In given photosynthesis reaction:
6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂
The given equation is balanced chemical equation of photosynthesis. There are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.
If equation is not balanced,
CO₂ + H₂O → C₆H₁₂O₆ + O₂
It can not follow the law of conservation of mass because mass is not equal on both side of equation.
A student noticed that the size of the hot pack becomes bigger when magnesium sulfate reacts with water. She thinks that more atoms are produced that make the hot pack grow bigger. Do you agree? Explain.
Answers
Answer:
Disagree with the suggestion based on the hygroscopic nature of anhydrous magnesium sulfate
Explanation:
Magnesium sulfate in the anhydrous form is a drying agent. A drying agent salts of inorganic compounds that has the capability of absorbing water to become hydrated, when placed in the presence of a wet surface or moist air
Anhydrous magnesium sulfate is therefore hygroscopic such that it absorbs water from the atmosphere and becomes hydrated and increases in size as its volume is increased according to the following chemical equation
MgSO₄(s) + 7H₂O(l) → MgSO₄·7H₂O(s)
The molar mass of anhydrous magnesium sulfate = 120.366 g/mol
The molar mass of the heptahydrate = 246.47 g/mol
Therefore, the mass of the magnesium sulfate doubles when it forms the heptahydrate, and the magnesium sulfate grows bigger.
Brianna explains to Logan the role of plants in the carbon cycle. Choose the sentence(s) that she includes in her explanation. Select all that apply.
A.
Animals get carbon from plants.
B.
Plants take carbon from the soil.
C.
Photosynthesis uses carbon monoxide.
D.
Animals take carbon from the atmosphere.
E.
Plants take carbon from the atmosphere.
Answers
Answer:
E) Plants take carbon from the atmosphere
Explanation:
Plants are a vital part in keeping the air clean. They take in CO2, H2O, and sunlight to start processing photosynthesis. The carbon taken in by the plant still remains with it after it dies, thus, fossil fuels.
Answer:
e is correct
Explanation:
Which of the following statements is true about the relationship between atoms and molecules? A. Most atoms are bonded together to make a molecule. B. An atom can be seen by scientists, but a molecule cannot. C. Atoms and molecules are the same and have no differences.
Answers
Answer:
I believe the answer is A. molecules are larger than atoms so they should be visible and atoms and molecules are indeed different
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option A.
What is atom?
Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. Most atoms are bonded together to make a molecule. Molecules combine to form compounds.
Therefore, the correct option is option A.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
1.004 mol Arsenic is how many atoms?
Answers
Answer: [tex]6.047\times 10^{23}[/tex] atoms in 1.004 mol of arsenic
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the atoms, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given atoms}}{\text {avogadro's number}}[/tex]
[tex]1.004=\frac{x}{6.023\times 10^{23}}[/tex]
[tex]x=1.004\times 6.023\times 10^{23}=6.047\times 10^{23}[/tex]
Thus there are [tex]6.047\times 10^{23}[/tex] atoms in 1.004 mol of arsenic
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
1 mol of oxygen has fewer molecules.
1 mol of oxygen has more molecules.
Each sample has the same number of molecules.
The molecules cannot be compared without knowing the mass.
Answers
Answer:
Each sample has the same number of molecules.
Explanation:
Just took the quiz on edge 2021
Taking into account the definition of Avogadro's number, each sample has the same number of molecules.
Avogadro's NumberAvogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Avogadro's number applies to any substance.
This caseAvogadro's number applies to any substance. This means that the number of molecules in 1 mol of oxygen is equal to the number of molecules in 1 mol of nitrogen.
Finally, the correct answer is the third option: each sample has the same number of molecules.
Learn more about Avogadro's Number:
brainly.com/question/1445383
brainly.com/question/1528951
How many different methods can you list for how we generate electricity in this country. Which of those methods do we use the most, and which of them should we invest more in
Answers
Answer:
1. Broadly, there are three different methods for how electricity is generated in the United States. They include; Fossil fuels, Nuclear energy, and Renewable energy sources.
2. Fossil fuels, are used the most, with Natural gas topping the list by 38%.
3. More should be invested into renewable gas. It is a clean source of energy and investing in it would bring about a cleaner and safer environment.
Explanation:
Fossil fuels arise from plants and animals that have been long dead and can can now be converted to sources of energy. Examples include; coal natural gas, crude oil. etc.
Nuclear energy arises from the fission of uranium atoms, nuclear decay, and nuclear fusion. They are safe since green house gases are not emitted. Thermal energy can be generated as the byproduct of these reactions.
Renewable sources of energy are generated from natural sources which are always available. Examples are; sun, wind, biomass, water, and geothermal sources,
An ____,or an element located in group 7A, will form a salt when reacted with a metal atom.
A. Alkali metal
B. Halogen
C. Noble gas
D. Transition metal
Answers
Answer:
B. Halogen
Explanation:
Halogens are the family of chemical elements found in the group VIIA of the periodic table which means they possess seven (7) outer electrons. Some examples of halogens are Fluorine (F), Iodine (I), Bromine (Br), and Chlorine (Cl).
A halogen, or an element located in group 7A, will form a salt when reacted with a metal atom.
For example, when Chlorine reacts with Sodium it would form a salt known as Sodium Chloride.
Na + Cl ----> NaCl
What is one possible excited state configuration for fluorine? *
Answers
Answer:
Excited State Configuration: 1s^2 2s^2 2p^4 3s^1 are sperated by 13.00 eV.
If you were to descend through the ocean in a submersible, what changes in the ocean water could you observe?
Answers
Answer:
it would become darker. there would be a higher level of water pressure. and there would be less animals, or different alimals.
Write the name for the IONIC compound that contains two aluminum atoms and three sulfur atoms. (Need help ASAP)
Answers
Al +3 charge, Aluminum
S -2 charge, Sulfur
Al2S3
In _____ , materials move from an area of higher concentration to an area of lower concentration through a cell membrane.
1.selective permeability
2.active transport
3.passive transport
Answers
Can someone answer ASAP if you hurry I will mark brainliest
Answers
Answer:
Electrical and magnetic
You exert a gravitational force on the pupil and the pupil exerts an equal gravitational force on you. ... The size of the gravitational force depends on the mass of the objects involved. The greater the mass, the greater the gravitational force.
Explanation:
Suppose that 3.33 g of acetone at 25.0 °C condenses on the surface of a 44.0-g block of aluminum that is initially at 25 °C. If the heat released during condensation goes only toward heating the metal, what is the final temperature (in °C) of the metal block?
Answers
Answer:
68.6 °C
Explanation:
From conservation of energy, the heat lost by acetone, Q = heat gained by aluminum, Q'
Q = Q'
Q = mL where Q = latent heat of vaporization of acetone, m = mass of acetone = 3.33 g and L = specific latent heat of vaporization of acetone = 518 J/g
Q' = m'c(θ₂ - θ₁) where m' = mass of aluminum = 44.0 g, c = specific heat capacity of aluminum = 0.9 J/g°C, θ₁ = initial temperature of aluminum = 25°C and θ₂ = final temperature of aluminum = unknown
So, mL = m'c(θ₂ - θ₁)
θ₂ - θ₁ = mL/m'c
θ₂ = mL/m'c + θ₁
substituting the values of the variables into the equation, we have
θ₂ = 3.33 g × 518 J/g/(44.0 g × 0.9 J/g°C) + 25 °C
θ₂ = 1724.94 J/(39.6 J/°C) + 25 °C
θ₂ = 43.56 °C + 25 °C
θ₂ = 68.56 °C
θ₂ ≅ 68.6 °C
So, the final temperature (in °C) of the metal block is 68.6 °C.
The final temperature of the metal block is 74.97°C
What is the specific heat?The specific heat of a substance is the required quantity of heat needed to raise the temperature of 1 gram of the substance by 1° C.
From the parameters given:
The mass of acetone = 3.33 gThe number of moles of acetone is:
[tex]\mathbf{= 3.33 g \times \dfrac{mol}{58.08 \ mol}}[/tex]
= 0.0573 mol
At standard conditions, the heat of vaporization of acetone is:
[tex]\mathbf{\Delta H = 32.0 \ kJ/mol \times 0.0578 \ mol } \\ \\ \mathbf{\Delta H = 1.8496 \ kJ } \\ \\ \mathbf{ \Delta H = 1.85 \times 10^3 \ J}[/tex]
Given that:
The mass of the metal (m) = 44.0 gThe initial temperature [tex]\mathbf{T_1}[/tex] = 25° CThe final temperature [tex]\mathbf{T_2 = ???}[/tex]The specific heat of the aluminum is = 0.903 J/g° C
The heat energy can be computed as:
q = msΔT
q = 41 g × 0.903 J/g° C × (x - 25°C)
Using the calorimetry principle, heat energy lost by metal = heat energy gained by acetone.
i.e.
[tex]\mathbf{q_{(acetone)} gain = q_{(metal)} lost }[/tex]
[tex]\mathbf{-1.85 \times 10^3 \ J = - 41 g \times 0.903 \ J/g^0 C \times ( x - 25^0 c) }[/tex]
[tex]\mathbf{1.85 \times 10^3 \ J = 41 g \times 0.903 \ J/g^0 C \times ( x - 25^0 c) }[/tex]
[tex]\mathbf{(x - 25 ^0 C) = \dfrac{1.85 \times 10^3 \ J }{ 41 g \times 0.903 \ J/g^0 C}}[/tex]
[tex]\mathbf{(x - 25 ^0 C) = 49.97^0 C}}[/tex]
[tex]\mathbf{x = 49.97^0 C+25 ^0 C}}[/tex]
x = 74.97 °C
Learn more about specific heat here:
https://brainly.com/question/1430612
Which of the following is one part of a chemical formula for a molecule?
A) A number that shows the total number of chemical bonds
B) Numbers that show how many atoms of each element are in the molecule
C) A number showing the atomic masses of each element
D) A Lewis dot diagram for the molecule
Answers
4. Which of the following have mass? Select all that apply.
O A neon-filled tube.
A diamond.
Water in a glass
The helium in a balloon.
Answers
Answer:
All except a diamond
Explanation:
The helium in the balloon has mass it fills the space its in.
The neon-filled tube has mass because it takes up space.
Water in a glass has mass because the water is taking up space.
A diamond does not because it does not take up space.
Mg(s) + HCl(aq) −→ MgCl2(aq) + H2(g).
What mass of HCl is consumed by the reaction of 2.28 mol of magnesium?
Answer in units of g
Answers
166 g HCl
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to RightChemistry
Stoichiometry
Reading a Periodic TableBalancing EquationsUsing Dimensional AnalysisExplanation:Step 1: Define
[RxN - Unbalanced] Mg (s) + HCl (aq) → MgCl₂ (aq) + H₂ (g)
[RxN - Balanced] Mg (s) + 2HCl (aq) → MgCl₂ (aq) + H₂ (g)
[Given] 2.28 mol Mg (s)
Step 2: Identify Conversions
[RxN] 1 mol Mg = 2 mol HCl
Molar Mass of H - 1.01 g/mol
Molar Mass of Cl - 35.45 g/mol
Molar Mass of HCl - 1.01 + 35.45 = 36.46 g/mol
Step 3: Stoichiometry
Set up: [tex]\displaystyle 2.28 \ mol \ Mg(\frac{2 \ mol \ HCl}{1 \ mol \ Mg})(\frac{36.46 \ g \ HCl}{1 \ mol \ HCl})[/tex]Multiply: [tex]\displaystyle 166.258 \ g \ HCl[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
166.258 g HCl ≈ 166 g HCl
If the [H+] of a solution is 6.8 x 10-9 mol/L the pH is
Answers
Answer:
8.2
Explanation:
To solve this problem;
The concentration of [H⁺] = 6.8 x 10⁻⁹mol/L
So, we need to convert this to pH:
pH = -log [H⁺]
So;
pH = -log 6.8 x 10⁻⁹ = 8.2
Which of the following is not a property of most
transition metals?
Answers
Answer:
Low melting point
Explanation:
Transition metals have the following properties:
Conductivity (Electrical and Thermal)
Malleability (You can hit it with a hammer to mold it)
High melting point
Answer:
Low melting point
Explanation:
Most transition metals property is high melting point.
This chemical equation represents a chemical reaction H2SO4 + 2LiOH Li2SO4 + 2H2O which two chemicals are the products of the chemical reaction shown?
Answers
Answer:
Lithium sulphate (Li₂SO₄) and water (H₂O
Explanation:
H₂SO₄ + 2LiOH —> Li₂SO₄ + 2H₂O
The equation represented above indicates a neutralization reaction.
A neutralization reaction is a reaction involving acid and base which result in the production of salt and water.
In the equation above,
Reactant:
H₂SO₄ (acid)
LiOH (base)
Product:
Li₂SO₄ (salt)
H₂O (water)
Thus, lithium sulphate (Li₂SO₄) and water (H₂O) are the products of the reaction
Which is a property of potassium (K)?
A. It is dull and brittle.
B. It is extremely reactive.
C. It is not reactive.
D. It is white and hard.
Answers
Answer:
B: It is extremely reactive
Explanation:
Potassium metal is also soft and white with a silvery lustre, has a low melting point, and is a good conductor of heat and electricity.
Answer: Properties, occurrence, and uses. Potassium metal is soft and white with a silvery lustre, has a low melting point, and is a good conductor of heat and electricity. Potassium imparts a lavender colour to a flame, and its vapour is green.
Explanation: hope it helps
the bond between which two atoms is most polar
Answers
Answer:
bond
Explanation:
It is a polar bond because it is when two atoms bond
1) Which electrons are involved in bonding between atoms?|
Answers
Answer:
VALENCE ELECTRONS are involved in the bonding of atoms
Explanation:
Hope that helps
