Answer:D.Compound
Explanation: internet
What is the downward pull on an object due to gravity?
mass
weight
acceleration
velocity
Answer:
Weight
Explanation:
WEIGHT - downward pull to the center of earth due to gravity
ACCELERATION - the rate of change of velocity
VELOCITY - rate of change if displacement in time
The major difference between the mass and weight is that mass of an object can never be zero but weight can be zero. The downward pull on an object due to gravity is called the weight. The correct option is B.
What is weight?The measure of the force of gravity acting on a body is defined as the weight. Actually weight is a force and its SI unit is Newton (N). The weight of an object depends on the mass and acceleration due to gravity.
The formula used to calculate the weight is:
w = mg
m = Mass of an object
g = Acceleration due to gravity
Weight is found to be a vector quantity. Because it has both magnitude and direction. It is directed towards the center of the earth or other gravity well.
When objects fall to the ground, it is the gravity which accelerates them. So the force of gravity which pulls the object downward is called the weight.
Thus the correct option is B.
To know more about weight, visit;
https://brainly.com/question/30189157
#SPJ7
Find the electric field E⃗ (r⃗ )E→(r→)E_vec(r_vec) inside the sphere (for rrr< aaa) in terms of the position vector r⃗ r→r_vec. Express your answer in terms of r⃗ r→r_vec, rhorhorho (Greek letter rho), and ϵ0ϵ0epsilon_0.
Solution :
Using the Gauss law, the electric field intensity of a sphere is given by :
[tex]$E. 4 \pi r^2 = \frac{Q_{enc}}{\epsilon_0}$[/tex]
[tex]$E = \frac{Q_{enc}}{4 \pi r^2 \epsilon_0}$[/tex]
Now the enclosed charge inside the sphere (r<a) is
[tex]$Q_{enc}= \rho V$[/tex]
[tex]$Q_{enc}= \rho \left( \frac{4}{3} \pi r^3 \right)$[/tex]
Hence, the electric field intensity becomes as follows :
[tex]$E= \frac{\rho \left(\frac{4}{3} \pi r^3\right)}{4 \pi \epsilon_0 r^2}$[/tex]
[tex]$E =\frac{\rho r}{3 \epsilon_0}$[/tex]
Thus, the electric field inside the sphere is given by :
[tex]$\vec {E} = \frac{\rho \vec{r}}{3 \epsilon_0}$[/tex]
I’ll give brainliest and 10 points
Answer:
A) (1) and (2)
Explanation:
pls mark me brainliest
Can an object with acceleration of zero be in motion?
Answer:
NO
Explanation:
if it has no acceleration then it's not moving
Answer:
Yes when the velocity is constant then the acceleration is said to be zero. Thus an object with 0 acceleration can be in motion.
Let me give you an example to make you more clear
Example:
When a car is traveling at a constant 90 km/h in a straight line has nonzero velocity and zero acceleration.
Which is a disadvantage of storing data digitally?
A.The parts of devices that store data are unstable compared to analog storage.
B. Other people can access personal data when a virus is copied with the data.
C. Noise makes digital data unreliable when copied.
D. The quality of copies stays the same as more copies are made.
Answer:
I thinks it’s b sorry if it didn’t help
Explanation:
One of the disadvantage of storing data digitally is that, other people can access personal data when a virus is copied with the data. Hence, security of data cannot be ensured.
What is digital storing?Nowadays there are many technological ways to store our credentials and essential documents. These data can be stored in virtual space such as in computers phones like electronic gadgets.
Compared to the conventional storage methods or paper format, digital storage is easy and fast easily accessible from anywhere in any format and can be shared. These data cannot damaged as paper document.
However, the digital storing have some drawbacks. Sometimes these data goes insecure and other people can access personal data when a virus is copied with the data.
Find more on digital storage:
https://brainly.com/question/13150495
#SPJ2
what energy is the energy an object has due to its position relative to another object ?
a. kinetic
b. potential
c. sound
d.wind
Answer:
Potential Energy
Billy is driving a bumper car for 5 minutes. In this time, Billy crashes into three other cars.
The first car is carrying another small child, the second is carrying a large adult, and the third is empty. Each car is sitting still when Billy hits it at full speed. Place the crashes in order of how much force Billy feels, from smallest to largest.
empty car
large adult
small child
<
Answer:Its empty car, small child, and then adult.
Explanation:
i took it
Answer:
Its empty car, small child, and then adult.
How does the sun maintain its high temperature and energy output?
Answer:
The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.
Explanation:
I got you
By not running out of fuel (Hydrogen).
Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.
how can Magnets cause objects to have kinetic energy?
SOMEONE PLZ HELP!!!! Lots of points
Answer:
If there is a system of magnets being held in place, there is potential energy. When you let go, the potential energy converts to kinetic energy and the magnets move. Putting the system of magnets close together which creates an opposing force.
Explanation:
Magnets cause objects to have kinetic energy by the magnetic force present in the magnet.
Magnets is a material which has a strong magnetic field which attracts ferromagnetic substances such as nickle, iron etc.
When a ferromagnetic objects put near the magnet, the magnet attracts the object and causes the movement towards its direction.
Therefore, magnets cause objects to have kinetic energy by the magnetic force present in the magnet.
To know more about magnets,
https://brainly.com/question/19542022
please help!!! 50 POINTS
1) The diagram below models the energy involved in a reaction that changes methane gas and oxygen into carbon dioxide and water.
The graph shows a certain level of energy of reactants C H2 + 2 O2, which increases on the breaking of bonds as the atoms are separated. The energy is then consumed when the making of bonds decreases the energy of products, C O2 + 2 H2 O, to a level much lower than the energy of reactants. The energy change of negative delta H depicts the exothermic reaction.
Which observations about the energy released in making the bonds are correct?
a) It is greater than the energy absorbed in breaking the bonds. The excess is converted to chemical energy.
b) It is greater than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
c) It is less than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
d) It is less than the energy absorbed in breaking the bonds. The excess is converted to chemical energy.
2) Carbon dioxide is an example of a molecule where the component atoms of carbon and oxygen are held together by chemical bonds. Which statement correctly describes the reason for these chemical bonds?
a) The nuclei and electrons of the atoms are attracted to each other.
b) The strong nuclear energy bonds the atoms together.
c) The combination of chemical energy stored in each atom makes the bonds strong.
d) The structure of atoms increases their atomic energy, which creates the bonds.
3) When burning fuel for cooking, the pan and the food absorb energy and heat up. In this process, which form of energy is chemical energy converted into?(1 point)
a) thermal energy
b) atomic energy
c) mechanical energy
d) radiant energy
4) Which of the following statement/s about the energy involved in a chemical reaction is/are correct?
I. The energy stored in chemical bonds is kinetic energy.
II. The total energy is conserved during a chemical reaction.
III. Chemical energy can be converted to other forms of energy.
IV. Energy is needed to both break bonds and form new bonds.
a) III and IV only
b) II and III only
c) II, III, and IV only
d) I only
5) Burning coal results in several energy transformations to generate electricity. Which statement is correct about the chemical energy stored in chemical bonds between atoms when coal is burned?
a) It allows the bonds to form and then break.
b) It helps transform kinetic energy to potential energy.
c) It increases the number of atoms.
d) It converts to thermal energy.
thank you!!
Answer:
Explanation:
1. It is greater than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
2. The nuclei and electrons of the atoms are attracted to each other
3. thermal energy
4. II and III only
5. It converts to thermal energy.
Equation of motion description is v=20+2t.How big is the initial speed,acceleration?
Answer:
the initial velocity is 20 m/s and the acceleration is 2 m/s²
Explanation:
Given equation of motion, v = 20 + 2t
If V represents the final velocity of the object, then the initial velocity and acceleration of the object is calculated as follows;
From first kinematic equation;
v = u + at
where;
v is the final velocity
u is the initial velocity
a is the acceleration
t is time of motion
If we compare (v = u + at) to (v = 20 + 2t)
then, u = 20 and
a = 2
Therefore, the initial velocity is 20 m/s and the acceleration is 2 m/s²
Need help ASAP
Thanks+ BRAINLIST only for correct answers
4. Which of the following sets of EM radiation can harm your body cells?
a. Gamma ray, microwaves, infrared
b. Light, ultraviolet, x-ray
c. Microwaves, ultraviolet, infrared
d. Ultraviolet, x-ray, gamma ray
Answer:
a. Gamma ray, microwaves, infrared
What direction does energy transfer to the direction of a light wave
Answer:
light is a transverse wave. The direction of energy transfer is perpendicular to the motion of the wave
Explanation:
Light is an example of a wave that transfers energy through empty space. How are all mechanical waves similar? The waves caused by an earthquake are good examples of energy transfer. The disturbed ground shakes from side to side and up and down as the waves move through it,
2. Which animal is a primary consumer in the Ethiopian Highlands?
walia ibex
tiger
black lion
prairie dog
Answer: Wallia Ibex
Explanation: Black lions and tigers are not primary consumers. However, the Wallia Ibex is a primary consumer, hope it helps :D.
please help! this this timed!!!
Answer:
Thermal heat
Explanation:
The water heats up which it means it is thermal (heat/hot)
What is the action and reaction if a person takes a step back
Answer:
action is backward and i guess reaction is sad
What are the factors of works?
Answer:
Explanation:
The seven factors are work load, family life, transportation, compensation policy and benefits, colleagues and supervisor, working environment and working condition and career growth.
examine this diagram of the human heart. what is the structure indicated by the arrow?
I unfortunately can't post a picture because I am uploading this question from my computer but I will do my best to describe the image.
It's a normal picture of a human heart, but there is an artery going down and there is an artery going to the right, I need the name of the artery going to the right because that is what the arrow is pointing at.
A. The Pulmonary Artery
B. The Pulmonary Vein
C. The Superior Vena Cava
D. The Aorta
Answer:
Right coronary artery
Explanation:
Right coronary artery (RCA). The right coronary artery supplies blood to the right ventricle, the right atrium, and the SA (sinoatrial) and AV (atrioventricular) nodes, which regulate the heart rhythm.
Answer:
A.) Pulmonary artery
Explanation: Someone told me Aorta and i got it wrong....
PLEASE HELPPPPPPPPPP I WILL GIVE YOU BRAINLIEST Catalina's class wants to determine if boys or girls recycled more paper each day. They set up separate recycling bins in the classroom and labeled them "Boys" and "Girls." The students then placed their paper items in the correct bins. Which of the following should the students do each day before emptying the bins?
Answer:
what are the answer choices
Explanation:
i dont know the choices so i say count the stuff they recycle, and add the score to the days before.
If an ice cube with the mass of 5.0 grams melts in a closed system such as closed glass jar, what is the mass of the liquid water after the ice cubes completely melts?
A) 4.0 grams
B) 5.0 grams
C) 6.0 grams
D) The mass cannot be determined without knowing the volume.
Answer:
4.0 grams
Explanation:
Answer:
B) 5.0 grams
Explanation:
Its right
How much force is needed to accelerate a 70 kg rider and her 200 kg
motor scooter at 4 m/s/s? (Include measurement label) *
Answer: f= mass×acceleration
They said t1he scooter so 200× 4
=800N
Explanation:
I am not that sure
what safety precautions do you have to keep in mind when playing invasion games?
Wear protective gear, such as helmets, protective pads, and other gear.
Warm up and cool down.
Know the rules of the game.
Watch out for others.
Don't play when you're injured.
Which equation should be used to calculate the speed of a wave?
speed = frequency x wavelength
speed = frequency x hertz
speed = period x wavelength
speed = period x hertz
The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
What is the formula for wave speed?The speed of a wave is calculated by the equations: V = λ . f or V = λ/T, and the unit of measurement is m/s. This speed depends on the medium: in gaseous media, the speed is lower than in solid media.
See more about wave speed at brainly.com/question/10715783
The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
What is Speed of wave?Wave speed is the movement of a progressive wave, which is an energy-moving disturbance that takes the shape of an oscillation and moves from one place to another.
The wavelength and frequency of a wave both affect its speed. A wave's speed is a crucial factor because it enables us to estimate how quickly the wave will disperse in the medium, which is the substance or material that will carry it.
This is the water in the case of ocean waves and the air in the case of sound waves. The kind of wave and the physical properties of the medium in which it is flowing also affect a wave's velocity.
Therefore, The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
To learn more about Wavelength, refer to the link:
https://brainly.com/question/30607075
#SPJ5
The time for a sound wave to travel between two people is 0.80 s,
The people are 256 m apart
Calculate the speed of sound in air.
Answer:
Explanation:
Using the below formula
Speed of sound = ( distance between observers) *2/(total time taken)
Now putt the given values ,
time taken = 0.80 sec
distance = 256 m
hence
V of sound= 256*2/0.80
V of sound = 640 m/sec
A frictionless pulley system connects a 150 Kg block of a flat surface with a coefficient of friction of 0.20 to a hanging 200 kg block. Determine the tension on the cord, the frictional force of the block on the surface, acceleration of descending block, and time required for a hanging block to full 10 meters.
A layer of water Δx m thick which lies x m above the bottom of the tank will be rectangular with length 8 m. Using similar triangles, we can see that it will have widt of_____m
Answer:
x
Explanation:
The question relates to the energy required to pump water out of the
spout at the top of the triangular prism tank.
The width of the layer of water Δx thick is x m.
Reasons:
The location of the layer Δx m thick = x meters above the bottom
The length of the triangular (cross-section) prism tank = 8 meters
The length of the layer Δx thick layer = 8 meters
From the attached drawing of the cross-section of the tank, we have;
The height of the triangular tank cross-section = 3 meters
The length of the base of the triangular cross-section = 3 meters
By similar triangles, we have;
[tex]\dfrac{Height \ of \ Tank}{Base \ length \ of \ tank}= \dfrac{Height \ of \ layer \ with \ thickness \ \Delta x }{Width \ of \ layer \ with \ thickness \ \Delta x}[/tex]
Which gives;
[tex]\dfrac{3}{3} =\dfrac{x}{Required \ width}[/tex]
[tex]\dfrac{3}{3} =1 = \dfrac{x}{Required \ width}[/tex]
Required width × 1 = x
The required width = x m
Learn more here:
https://brainly.com/question/8830987
https://brainly.com/question/15695639
https://brainly.com/question/13507755
I had to show a screenshot of this because brainly thinks it detects a bad word
which statements describe kinetic and potential energy? check all that apply.
Answer:
ACDE
Explanation:
Energy is generally described as the ability to do work by a body. There are two main forms of energy which are the kinetic energy and the potential energy.
Other energy forms stems from these two energy types.
Potential energy expressly deals with the position of a body. It is mathematically given as:Potential energy = mass x acceleration due to gravity x height
It is the energy stored based on the position of particles within a mediumThese description satisfies options A, C
Kinetic energy is the energy due to the motion of body. It is mathematically given as:Kinetic energy = [tex]\frac{1}{2}[/tex] x mass x velocity²
Also, kinetic energy is directly proportional to the velocity of a body.The description satisfies DE
When we stretch a spring, which two factors affect how much elastic
potential energy is stored in it
I need help ASAPP
Thanks+ BRAINLIST only for correct answer for these questions.
Which among the following forms of electromagnetic waves has the highest frequency range?
O Microwave
O Radio waves
O X-ray
O Ultraviolet
Radio waves carry information from a broadcasting station to your radio or television.
-visible light
- sound
-X -ray
- gamma ray
Answer: For the first part the answer is Radio Waves and the second part’s answer is gamma ray.
plzzz helpp mee guysss!!! plzzzz
A car is traveling north on the interstate. They cover 645 miles in 9 hours. What is the car's average velocity?
Answer:
ycuvivxuduviguv8vifudsyfucuv
