PHYSICAL SCIENCE PLEASE PLEASE HEP DUE TODAY AT 11!! will give brainly if its correct!! <3333 thank you so muchh!!
Which problem cannot be solved using the scientific method?
determining which student reads faster
discovering who invented the radio
discovering how much salt should be used to boil water faster
determining which laundry detergent works best
Answer:
I would say discovering who invented the radio.
Explanation:
The other ones can be solved by experiments and the "discovering who invented the radio" cannot be solved by an experiment.
hope this helps.
Answer:
I would say who invented the ratio
Explanation:
Well you dont need to use the scientific method to know WHO discovered it, you use it to determine HOW
True or false
Equal forces acting on one object in opposite directions are called balanced forces
Answer:
True
Explanation:
Forces, equal in magnitude and opposite in direction, and cancel each other out are called Balanced Forces.
Balanced Forces DO NOT cause any change in the velocity of the object, but the Object may correspond to a change in shape or size.
Example :
Blasting a balloon by compressing it tightly with both hands, roughly with an equal force, is a practical example of Balanced Forces. In this case, the balloon before the burst stays at a state of rest and same after the burst. But the burst or the compression, causes a change in the shape of the balloon.
What Group would this element be in?
Answer:
Non-metals because it has 9 electrons meaning it is fluorine
Explanation:
using the model, what is the mass of the atom pictured?
A) 3amu
B) 5amu
C) 7amu
D) 9amu
Answer:
A) 3amu
Explanation:
What separates the inner planets from the outer planets in our solar system?
()Comet Belt
()Asteroid Belt
()Their differences
()Distance
Help plss!!
Answer:
the answer is B Astroid Belt
In what way is Model A better than Model B? Model A shows the types of elements in the compound, but Model B does not. Model A shows the total number of atoms in the molecule, but Model B does not. Model A shows the three-dimensional shape of the molecule, but Model B does not. Model A shows the number of atoms of each element in the molecule, but Model B does no
Answer:the answer is c babes
Explanation:
I hope I could help y’all
Have a nice day
Or whatever day u want LMA0 it’s not up to me. Ight peace loves
Model A is better than Model B as Model A shows the three-dimensional shape of the molecule, but Model B does not. The correct option is c.
What are molecules?The smallest particle of a substance possesses all of its physical and chemical properties. One or more atoms make up a molecule.
Knowing the molecular weights of the molecules allows us to calculate their sizes. The molecular weight of a molecule is the sum of the atomic weights of the atoms in the molecule.
The relative atomic mass of particles determines their size. Particles with a higher relative atomic mass weigh more than particles with a lower relative atomic mass. Larger atoms have heavier iotas and a larger relative atomic mass.
Therefore, the correct option is c, Model A shows the three-dimensional shape of the molecule, but Model B does not.
To learn more about molecules, refer to the link:
https://brainly.com/question/28931982
#SPJ2
true or false, a temperature of 0°F is equal to 32°C
Answer:
false
Explanation:
Answer:true
Explanation:
Consider the compound Al(OH)3. What type of solid does it form?
Answer: crystal lattice
Explanation:
Answer:
A and the next question is c
Explanation:
Edge 2020
Potasyum-40 küçük atom numaralı doğal radyoaktif birkaç element izotopundan biridir ve doğada K izotopları içerisindeki bolluk yüzdesi %0,012'dir. 1,65 mg K/mL içeren bir bardak sütü içtiğiniz zaman kaç tane 40K atomu yutmuş olursunuz? (1 Bardak süt 225 mL, K: 39,10 g/mol)
Answer:
6.707 × 10¹⁷
Explanation:
From the information given:
40 ^ K kütlesi = sütteki K kütlesi × 40 ^ K / 100 kütle yüzdesi
nerede;
sütteki K kütlesi = 1.65 mg of K/mL × 225 mL = 371.25 mg of K
∴
40 ^ K kütlesi = 371.25 × 0.012/100
40 ^ K kütlesi = 0,04455 mg = 4.455 × 10⁻⁵ grams
40 ^ K mol sayısı = 40 ^ K kütlesi / molar kütle
= 4.455 × 10⁻⁵/40
= 1.11375 × 10⁻⁶
Son olarak, 40 ^ K = mol × Avogadro sayısı atomları
= 1.11375 × 10⁻⁶ × 6.022 × 10^23
= 6.707 × 10¹⁷
Provide your answer in the following format: [element name], [chemical family]
Answer: Bismuth (Bi) , Nitrogen family
Explanation:
As the element has 5 valence electrons in the sixth energy level, which mens it belongs to 6th period as the valence electron has entered the 6th energy level.
Now as the electrons are filled according to afbau's rule , the electronic configuration of the element will be :
[tex][Xe]4f^{14}5d^{10}6s^26p^3[/tex]
Now as the atomic number of element is equal to the number of electrons in a neutral atom , the atomic number is 83 and the element is Bismuth (Bi). As the last electron enters p -subshell , it is a p block element. It lies in group 15 which is nitrogen family.
Think about how particles are arranged inside atoms. Please name and describe those three particles, and describe how the particles are arranged inside atoms. Some topics to include are: the charge of the particles, the mass of the particles, and where the particles are located.
How many moles are there in 5.2x10^23 atoms of CO2?
Answer:
0.86 moles of CO₂
Explanation:
Given data:
Number of atoms of CO₂ = 5.2×10²³ atom
Number of moles = ?
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
5.2×10²³ atom× 1 mol / 6.022 × 10²³ atoms
0.86 mol
help!!!!! please
there is no question just fill in the question marks
Answer:
32 grams
Explanation:
Ignore the other answer. Two oxygen atoms have a mass of 32 grams. You can also arrive at this answer by subtracting the given values (i.e. 36 - 4 = 32).
How many grams are there in 2.34x10^23 atoms of Cu?
The mass of the 2.34 × 10²³ atoms of copper is equal to 24.68 grams.
What is Avogadro's number?The Avogadro constant can be defined as the proportionality factor that the number of constituent particles in a sample with the amount of substance.
Avogadro’s number can be described as a dimensionless number that represents the number of entities in one mole of any substance. These elementary entities can be molecules, atoms, ions, electrons, or protons, etc.
Avogadro’s constant has a value approximately equal to 6.022 × 10²³ mol⁻¹.
Given, the number of atoms of copper = 2.34 × 10²³
The atomic mass of Cu Copper = 63.5 g/mol
So 6.022 × 10²³ atoms of Cu have mass = 63.5 g
Then 2.34 × 10²³ Cu atoms will have mass = [tex]\frac{63.5 \times 2.34 \times 10^{23}}{6.02 \times 10^{23}}[/tex] = 24.68 g
Therefore, 24.68 grams of Cu are there in 2.34 × 10²³ atoms of Cu.
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ2
20 POINTS!!
Kinetic and Potential Energy
Answer:
When a ball is rolled up a hill, it has potential energy that can turned into kinetic energy. The kinetic energy would be the ball rolling down the hill.
Explanation:
Hope this helps!
how many atoms are there in 8.08 moles of carbon dioxide
Answer:
145.97×10²³ atoms
Explanation:
Given data:
Number of moles of CO₂ = 8.08 mol
Number of atoms of CO₂ = ?
Solution:
1 mole of CO₂ contain 1 mole C atom.
8.08 mole contain 8.08× 1 = 8.08 mole of C atom.
1 mole of CO₂ contain 2 moles of O atom.
8.08mole contain 8.08×2 = 16.16 mole of O atom.
Total number of moles of atoms = 8.08 mole + 16.16 mole
Total number of moles of atoms = 24.24 mol
Number of atoms of CO₂:
1 mole of any substance contain 6.022×10²³ atoms.
24.24 mol ×6.022×10²³ atoms / 1 mol
145.97×10²³ atoms
A 50 gram sample of radioisotope undergoes 2 half lives. How many grams would remain at the end?
Answer:
you would need to multiply 50 times 2 wich is 100 so i beleive its 100
Explanation:
Show your work with good use of units, rounding, and significant figures. [Hint: it is good practice to show the value of your answer before you round off to the final answer with the correct significant figures!]
(8 points) How much heat is required to convert 10.00 g of ice at –20.00°C to water at 25°C. The specific heat of ice is 2.09J/g°C; the specific heat of water is 4.182 J/g°C; the heat of fusion is 333.0 J/g.
Group of answer choices
Heat required : 4.8 kJ
Further explanationThe heat to change the phase can be formulated :
Q = mLf (melting/freezing)
Q = mLv (vaporization/condensation)
Lf=latent heat of fusion
Lv=latent heat of vaporization
The heat needed to raise the temperature
Q = m . c . Δt
1. heat to raise temperature from -20 °C to 0 °C
[tex]\tt Q=10\times 2.09\times (0-(-20)=418~J[/tex]
2. phase change(ice to water)
[tex]\tt Q=10\times 333=3330~J[/tex]
3. heat to raise temperature from 0 °C to 25 °C
[tex]\tt Q=10\times 4.18\times (25-0)=1045~J[/tex]
[tex]\tt Q~tot=418+3330+1045=4793~J\rightarrow rounding~and~2~sig~figs=4.8~kJ[/tex]
Wax melts when it is heated. Which most likely describes what is true of the result of this reaction?
The bonding of the atoms is not the same before and after the change.
The wax has the same density before and after the change.
The same amount of wax exists before and after the change.
The wax cannot be changed back into a solid.
quickly help!!!
Answer:
The same amount of wax exists before and after the change.
Explanation:
Answer:
c -the same amount of wax exists before and after the change-
Explanation:
I did the quiz (edg.) :)
Some notes for you:
A physical change is a change in some of the physical properties of matter, but not in its identity.Wax melting is an energy change, and the energy change can be reversed, which means the wax cools into hard wax again. The wax didn't leave, nor did it somehow get less of it. It stays the same! :)I hope you have an amazing day, I mean it. God bless you!
john 7:37 <3
The chemical equation describing the burning of hydrogen gas is: 2H2 + O2 ---> 2H2O.
Why is this both a synthesis and a combustion reaction?
Answer:
"A combustion reaction is a reaction in which a substance reacts with oxygen gas, releasing energy in the form of light and heat. Combustion reactions must involve O2 as one reactant. The combustion of hydrogen gas produces water vapor." and "A synthesis reaction occurs when two or more reactants combine to form a single product. ... In a double replacement reaction, two compounds exchange elements. A combustion reaction occurs when a substance reacts quickly with oxygen. Combustion is commonly called burning"
Explanation:
I tried
what type of weather forecasting can forecast from 3-7 days? I NEED ANSWERS FAST!!!
Answer:
WPC medium range forecasting
Explanation:
can you pls help me with this question
Answer:
probably c
Explanation:
Answer: I feel like the correct answer is choice C but I really don’t know how to explain it..
I would really appreciated if someone can help !!
A student calculated that 15 grams of his product were supposed to be produced. After completing the experiment, he actually
collected 11 grams of product. What is his percent yield?
a 73%
b 7.3%
c 14%
d 140%
Compared to ionic compounds, molecular compounds generally have
A. good conductivity.
B. greater densities.
C. more chemical bonds.
D. a low boiling point.
Compared to ionic compounds, molecular compounds generally have a low boiling point and the correct option is option D.
What are Molecular compounds?
Molecular compounds are held together by covalent bonds. They are also called covalent compounds.
Covalent bonds are responsible for many of the properties of covalent compounds. Covalent compounds have relatively low boiling points, cannot conduct electricity, and may not dissolve in water.
Unlike ionic compounds, covalent compounds do not have freely moving electrons, so they cannot conduct electricity.
The individual molecules of covalent compounds are more easily separated than the ions in a crystal, so most covalent compounds have relatively low boiling points.
Therefore, compared to ionic compounds, molecular compounds generally have a low boiling point and the correct option is option D.
Learn more about Molecular compounds, here:
https://brainly.com/question/23088724
#SPJ3
What is the redox reaction? And how does the redox reaction happen inside batteries?
Answer:
It is called a reduction-oxidation, oxide-reduction reaction, or simply as a redox reaction, any chemical reaction in which one or more electrons are transferred between the reactants
Redox battery is an example of both a Flow Battery and a two electrolyte system.In this case, it depends on two different active aqueous electrolytes of vanadium dissolved in sulfuric acid separated by a membrane at which ionic interchange takes place.
Thats my opinión though.
12) Which model of the atom is thought to be true?
a. Protons, electrons, and neutrons are evenly distributed throughout the volume of
the atom.
b. The nucleus is made of protons, electrons, and neutrons.
c. Electrons are distributed around the nucleus and occupy almost all the volume of
the atom.
d. The nucleus is made of electrons and protons.
Answer:
B
Explanation:
The neucles is surrounded by electrons. Electrons occupy most of the volume of the atom.
Atomic Model:
Atoms are the smallest unit of elements, which form bonds with others. In an atom, electrons revolve around the nucleus.
The nucleus is composed of positively charged protons and neutrons. The nucleus occupies a very small part of the atom.
Electrons are negatively charged particles, they are found around the nucleus and occupy most of the part of the atom.
Therefore, The neucles is surrounded by electrons. Electrons occupy most of the volume of the atom.
To know more about Atomic Model:
https://brainly.com/question/1596638
Which element has a mass number of 32?
a. argon ion
b. silicon ion
C. silicon
d. sulfur
6) Define Hydrogen bonds
A. A force created by differences in electronegativity and the small size of the hydrogen atom
make them especially strong.
B. A force created by similarities in electronegativity and the small size of the hydrogen atom
make them especially strong,
C. Forces created by temporary dipoles that result from the movement of electrons in non-
polar molecules.
D. A force created by differences in electronegativity and the large size of the hydrogen atom
make them especially strong,
E. The force between polar molecules when the opposite partial charges of a molecule exert a
force on each other
Answer:
A hydrogen bond is an intermolecular force (IMF) that forms a special type of dipole-dipole attraction when a hydrogen atom bonded to a strongly electronegative atom exists in the vicinity of another electronegative atom with a lone pair of electrons. Intermolecular forces (IMFs) occur between molecules. Other examples include ordinary dipole-dipole interactions and dispersion forces. Hydrogen bonds are are generally stronger than ordinary dipole-dipole and dispersion forces, but weaker than true covalent and ionic bonds.
Explanation:
Which of the following is not a clue that a chemical reaction has taken place? *
4 points
A solid is formed when two clear solutions are mixed.
A clear solution is added to a red solution, and the result is a blue solution.
A solid is added to water and bubbles form.
A pure solid is heated and turns into a pure liquid.
Answer:
A pure solid is heated and turns into a pure liquid.
Explanation:
No colour change recorded, only change of state, hence this is a physical change - physical changes I.e. change of state and temperature are not chemical reactions.
Which of the following traits are inherited from parents when the genetic material found in genes is passed to offspring on the chromosomes located in egg and sperm?
A. Sharp Teeth
B. Penguins caring for young
C. All the above
D. Flower color
