help with this physics question please :)

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

Answer:

Explanation:

We are basically needing to solve for the time in the equation d = rt, where d is the distance around Mars (aka the circumference), r is the velocity, and t is time. We need to find the circumference and the velocity. We will begin with the velocity.

Because the gravitational attraction between Phobos and Mars provides the centripetal acceleration necessary to keep Phobos in its (sort of) circular path, the equation we use for this is:

[tex]F_g=F_c[/tex] which says that Force supplied by gravity is equal to the centripetal force. Expanding that:

[tex]\frac{Gm_{Phobos}m_{Mars}}{r^2}=\frac{m_{Phobos}v^2}{r}[/tex]

When we move that around mathematically to solve for the velocity value, what we end up with is:

[tex]v=\sqrt{\frac{Gm_{Mars}}{r}[/tex] and filling in:

[tex]v=\sqrt{\frac{(6.67*10^{-11})(6.42*10^{23})}{9.38*10^6} }[/tex] and we get that

v = 2100 m/s

Now for the circumference:

C = 2πr and

C = 2(3.1415)(9.38 × 10⁶) so

C = 5.9 × 10⁷

Putting that all together in the C = vT equation:

5.9 × 10⁷ = 2100T so

T = 2.8 × 10⁴ sec or 7.8 hours

Answer:

Explanation:

        16093.4

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ • F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ • F₁) + (F₁ • F₂) = F₁ • F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

Answer:

250 Pa or N/m^2

Explanation:

Pressure(P)=F/A=500/2=250 Pa or N/m^2

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Answer:

units of impact or impulse or momnetum are same

These are

Kg m s-1 or N s

Answer:

Torque; τ = 4.712 × 10^(-3) J

Magnetic moment; M = 0.0248 J/T

Explanation:

Torque is gotten from the formula;

τ = BIA

Where;

B is magnetic field

I is current

A is area

We are given;

B = 0.19T

I = 6.2A

Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m

Thus;

Area; A = 0.05m × 0.08m = 0.004 m²

Thus;

τ = 0.19 × 6.2 × 0.004

τ = 4.712 × 10^(-3) J

Formula for the magnetic moment is given by;

M = IA

M = 6.2 × 0.004

M = 0.0248 J/T

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

Explanation:

the temperature will determine the kinetic energy or degree of freedom of the molecules of matter.

if the temperature is high, the kinetic energy of the molecules increase which may cause a change of state into a gas which has molecules of high kinetic energy. this shows that temperature is a measure of the kinetic energy of the molecules.

Answer:

Mass = 0.04 Kg

Explanation:

Given the following data;

Density = 800 kg/m³

Volume = 5 * 10^{-5} m³

To find the mass of the object;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making mass the subject of formula, we have;

[tex] Mass = density * volume [/tex]

Substituting the values into the formula, we have;

[tex] Mass = 800 * 5 * 10^{-5} [/tex]

Mass = 0.04 Kg

The answer to the digits rounded to one significant figure is 100.

Significant figures are the most important figures in a number of digits.

The closer a digit is to the beginning of a number, the more important  or significant  it is.

But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:

From the numbers 98.907, 9 is the most significant digit followed by 8.

8 is greater than 5 so we should round up by adding one to 9 making the number 100.

learn more here:

https://brainly.com/question/11566364

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

Answer:

The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids

Answer:

The laws of liquid pressure:

The pressure that is inside the liquid rises with the intensity from the surface of a liquid.

The term fluid:

Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

Explanation:

tilting it will raise the height of its center of gravity.

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

The change in the frequency of the sound, due to the relative motion of the source of sound and the observer, is determined by the Doppler's Effect.

The speed of the ambulance (source) is "6517 m/s"

The equation of Doppler's Effect is given as follows:

[tex]f_o = \frac{v+v_o}{v+v_s}f_s[/tex]

where,

[tex]f_o\\[/tex] = frequency of sound measure by observer  = 100 Hz

v = speed of sound = 343 m/s

[tex]v_o[/tex] = speed of observer = 0 m/s

[tex]v_s[/tex] = speed of ambulance (source) = ?

[tex]f_s[/tex] = actual frequency = 2000 Hz

Therefore, using the values, we get:

[tex]100\ Hz = \frac{343\ m/s + 0\ m/s}{343\ m/s + v_s}(2000\ Hz)\\\\(100\ Hz)(343\ m/s + v_s) = (343\ m/s)(2000\ Hz)\\\\v_s = \frac{686000\ Hz.m/s - 34300\ Hz.m/s}{100\ Hz}[/tex]

v_s = 6517 m/s

Learn more about Doppler's Effect here:

https://brainly.com/question/1330077?referrer=searchResults

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

Answer:

To convert 400 mm to m you can apply the formula [m] = [mm] / 1000; use 400 for mm. Thus, the conversion 400 mm m is the result of dividing 400 by 1000. 0.4

PLEASE MARK AS BRAINLIEST ANSWER

Answer:

38500

Explanation:

I looked it up so it may be wrong

Flourine is an element which has 9 electrons. The first energy level can only hold upto 2 electrons so therefore two electrons of the fluorine element will be in the first orbital.

In the second orbital there will be seven electrons. The configuration will be as 1s2, 2s2 , 2p5 .

The first orbital has capacity of two electrons and then the remaining two electrons will be in higher second energy level.

The further 5 electrons will be in lower second energy level which is denoted by p.

Learn more at https://brainly.com/question/24373325

Answer:

#1. 5

#2.They have valence electrons in the same energy level.

#3. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.

#4. cesium (Cs)

#5.  There are two electrons in the first energy level and seven electrons in the second energy level.

Explanation:

Answer:

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!