HELPPPPPPPPPPPPPPPPPP

Answer:

In explanation.

Explanation:

Physical changes are generally changes in states of matter. So, the water going from liquid to gas is a phase change and therefore physical. (It's still water, just in a different form). Im not sure about the second piece of evidence though. Unless you are talking about the Mac and Cheese which in that case is also a physical change as the two ingredients cheese and macaroni stay the same when cooked just become softer and edible.

Answer:

Therefore, the specific heat capacity of the iron is 0.567J/g.°C.

Note: The question is incomplete. The complete question is given as follows:

A 59.1 g sample of iron is put into a calorimeter (see sketch attached) that contains 100.0 g of water. The iron sample starts off at 85.0 °C and the temperature of the water starts off at 23.0 °C. When the temperature of the water stops changing it's 27.6 °C. The pressure remains constant at 1 atm.

Calculate the specific heat capacity of iron according to this experiment. Be sure your answer is rounded to the correct number of significant digits

Explanation:

Using the formula of heat, Q = mc∆T  

where Q = heat energy (Joules, J), m = mass of a substance (g)

c = specific heat capacity (J/g∙°C), ∆T = change in temperature (°C)

When the hot iron is placed in the water, the temperature of the iron and water attains equilibrium when the temperature stops changing at 27.6 °C. Since it is assumed that heat exchange occurs only between the iron metal and water; Heat lost by Iron = Heat gained by water

mass of iron  = 59.1 g, c = ?, Tinitial = 85.0 °C, Tfinal = 27.6 °C

∆T = 85.0 °C - 27.6 °C = 57.4 °C

mass of water = 100.0 g, c = 4.184 J/g∙°C, Tinitial = 23.0 °C, Tfinal = 27.6 °C

∆T = 27.6°C - 23.0°C = 4.6 °C

Substituting the values above in the equation; Heat lost by Iron = Heat gained by water

59.1 g * c * 57.4 °C  = 100.0 g * 4.184 J/g.°C * 4.6 °C

c = 0.567 J/g.°C

Therefore, the specific heat capacity of the iron is 0.567 J/g.°C.

Answer:

The molecular formula for sulfur hexafluoride is SF6 S F 6 , in which there is 1 sulfur atom and 6 fluorine atoms.

Explanation:

hope this helps

Answer:c

Explanation:

Answer:

C₃H₆ is an alkene

C₆H₁₂ is an alkene

C₈H₁₈ is an alkane

C₇H₁₂ is an alkyne

Explanation:

To determine which of the compound is alkane, alkene, or alkyne,we shall use the general formula of alkane, alkene, and alkyne. This is illustrated below:

General formula for alkane => CₙH₂ₙ₊₂

General formula for alkene => CₙH₂ₙ

General formula for alkyne => CₙH₂ₙ₋₂

For C₃H₆:

n = 3

Alkane => CₙH₂ₙ₊₂ => C₃H₂₍₃₎₊₂ => C₃H₈

Alkene => CₙH₂ₙ => C₃H₂₍₃₎ => C₃H₆

Alkyne => CₙH₂ₙ₋₂ => C₃H₂₍₃₎₋₂ => C₃H₄

Thus, C₃H₆ is an alkene

For C₆H₁₂:

n = 6

Alkane => CₙH₂ₙ₊₂ => C₆H₂₍₆₎₊₂ =>C₆H₁₄

Alkene => CₙH₂ₙ => C₆H₂₍₆₎ => C₆H₁₂

Alkyne => CₙH₂ₙ₋₂ => C₆H₂₍₆₎₋₂ => C₆H₁₀

Thus, C₆H₁₂ is an alkene

For C₈H₁₈:

n = 8

Alkane => CₙH₂ₙ₊₂ => C₈H₂₍₈₎₊₂ => C₈H₁₈

Alkene => CₙH₂ₙ => C₈H₂₍₈₎ => C₈H₁₆

Alkyne => CₙH₂ₙ₋₂ => C₈H₂₍₈₎₋₂ => C₈H₁₄

Thus, C₈H₁₈ is an alkane.

For C₇H₁₂:

n = 7

Alkane => CₙH₂ₙ₊₂ => C₇H₂₍₇₎₊₂ => C₇H₁₆

Alkene => CₙH₂ₙ => C₇H₂₍₇₎ => C₇H₁₄

Alkyne => CₙH₂ₙ₋₂ => C₇H₂₍₇₎₋₂ => C₇H₁₂

Thus, C₇H₁₂ is an alkyne.

SUMMARY:

C₃H₆ is an alkene

C₆H₁₂ is an alkene

C₈H₁₈ is an alkane

C₇H₁₂ is an alkyne

Answer:

Chalcogen

Explanation:

Answer: The empirical formula is [tex]C_3H_3O_2[/tex].

Explanation:

The chemical equation for the combustion of hydrocarbon having carbon, hydrogen and oxygen follows:

[tex]C_xH_yO_z+O_2\rightarrow CO_2+H_2O[/tex]

where, 'x', 'y' and 'z' are the subscripts of Carbon, hydrogen and oxygen respectively.

We are given:

Mass of [tex]CO_2[/tex] = 0.8635

Mass of [tex]H_2O[/tex]= 0.1767 g

Molar mass of carbon dioxide = 44 g/mol

Molar mass of water = 18 g/mol

For calculating the mass of carbon:

In 44g of carbon dioxide, 12 g of carbon is contained.

So, in 0.8635 g of carbon dioxide, =[tex]\frac{12}{44}\times 0.8635=0.2355g[/tex] of carbon will be contained.

For calculating the mass of hydrogen:

In 18g of water, 2 g of hydrogen is contained.

So, in 0.1767 g of water, =[tex]\frac{2}{18}\times 0.1767=0.0196g[/tex] of hydrogen will be contained.

Mass of oxygen in the compound = (0.4647) - (0.2355+0.0196) = 0.2096 g

Mass of C = 0.2355 g

Mass of H = 0.0196 g

Step 1 : convert given masses into moles.

Moles of C =[tex] \frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{0.2355g}{12g/mole}=0.0196moles[/tex]

Moles of H=[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{0.0196g}{1g/mole}=0.0196moles[/tex]

Moles of O=[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{0.2096g}{16g/mole}=0.0131moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C =[tex]\frac{0.0196}{0.0131}=1.5[/tex]

For H =[tex]\frac{0.0196}{0.0131}=1.5[/tex]

For O = [tex]\frac{0.0131}{0.0131}=1[/tex]

The ratio of C : H: O = 1.5 : 1 .5 : 1

Converting to simple whole number ratio:

The ratio of C : H: O = 3 : 3: 2

Hence the empirical formula is [tex]C_3H_3O_2[/tex].

Explanation:

Let the mass of the compound be 100g.

There are 60.2g of sulfur.

Moles of sulfur

= 60.2g / (32.07g/mol) = 1.877mol

There are 100g - 60.2g

= 39.8g of manganese.

Moles of manganese

= 39.8g / (54.94g/mol) = 0.724mol

Mole ratio of manganese to sulfur

= 0.724mol : 1.877mol = 1 : 2.5.

Answer:

1. 10moles

2. Find the summarized equation below

Explanation:

Mole = mass ÷ molar mass

Molar mass of oleum (H2S2O7) = 1(2) + 32(2) + 16(7)

= 2 + 64 + 112

= 178g/mol

According to the information provided, the mass of oleum is 1780g, hence, the number of moles in it is:

Mole = 1780/178

Mole = 10moles

2. The summarized equation of the contact process is:

1) S + O2 → SO2

2) 2SO2 + O2 → 2SO3

3) SO3 + H2SO4 (conc. sulfuric acid) → H2S2O7

4) H2S2O7 + H2O → 2H2SO4 (dilute sulfuric acid)

Answer:

Explanation:

HCl    + NaOH     =    NaCl    +     H₂O.

1 mole   1 mole           1 mole          1 mole

6.93  g of hydrochloric acid = 6.93 / 36.5 = .189 mole of HCl

2.4 g of NaOH = 2.4 / 40 =  .06 mole of NaOH

NaOH is in short supply so it is the limiting reagent .

1  mole of NaOH reacts with 1 mole of HCl to give 1 mole of Water

.06 mole of NaOH will react with .06 mole of HCl to give .06 mole of water

Water formed = .06 mole

= .06 x 18 = 1.08 g

= 1.1 g

Answer:

a parallel circuit has two or more paths for current to flow through voltage is the same across each component of the parallel circuit the sum of the current through each path is equal to the total current that follows from the source another definition is in a parallel circuit all components are connected across each other formally exactly two sets of electricity common points a branch in a parallel circuit in a path of electricity current formed by one of the load component

Answer:

Storms and hurricanes can be formed with low pressure. It always results into unsettled weather.

Explanation:

Hope this helps!

Answer:The atoms cool down and become slower and their bonds become close and they move less.

Explanation:I took science

Answer:

A. Empirical formula => SiCl₂I₂

B. Molecular formula = SiCl₂I₂

Explanation:

From the question given above, the following data were:

Silicone (Si) = 7.962 %

Chlorine (Cl) = 20.10 %

Iodine (I) = 71.94 %

Molar mass of compound = 352.8 g/mol

Empirical formula =?

Molecular formula =?

A. Determination of the empirical formula of the compound.

Si = 7.962 %

Cl = 20.10 %

I = 71.94 %

Divide by their molar mass

Si = 7.962 / 28 = 0.284

Cl = 20.10 / 35.5 = 0.566

I = 71.94 / 127 = 0.566

Divide by the smallest

Si = 0.284 / 0.284 = 1

Cl = 0.566 / 0.284 = 2

I = 0.566 / 0.284 = 2

Empirical formula => SiCl₂I₂

B. Determination of the molecular formula of the compound.

Empirical formula => SiCl₂I₂

Molar mass of compound = 352.8 g/mol

Molecular formula =?

Molecular formula = [SiCl₂I₂]ₙ

[SiCl₂I₂]ₙ = 352.8

[28 + (2×35.5) + (2×127)]n = 352.8

[28 + 71 + 254]n = 352.8

353n = 352.8

Divide both side by 353

n = 352.8 / 353

n = 1

Molecular formula = [SiCl₂I₂]ₙ

Molecular formula = [SiCl₂I₂]₁

Molecular formula = SiCl₂I₂

Answer: a) [tex]1.7\times 10^{-4}[/tex]

b) [tex]3.4\times 10^{-4}[/tex]

Explanation:

The reaction is :

[tex]2N_2O_5(g)\rightarrow 4NO_2(g)+O_2(g)[/tex]

Rate = Rate of disappearance of [tex]N_2O_5[/tex] = Rate of appearance of [tex]NO_2[/tex]

Rate =  [tex]-\frac{d[N_2O_5]}{2dt}[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]

Rate of disappearance of [tex]N_2O_5[/tex] = [tex]\frac{\text {change in concentration}}{time}[/tex] = [tex]\frac{0.100-0.066}{200-0}=1.7\times 10^{-4}[/tex]

a) Rate of disappearance of [tex]N_2O_5[/tex] = [tex]-\frac{d[N_2O_5]}{2dt}[/tex]

Rate of appearance of [tex]NO_2[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]

b) Rate of appearance of [tex]NO_2[/tex] =  [tex]\frac{d[NO_2]}{dt}=2\times 1.7\times 10^{-4}}=3.4\times 10^{-4}[/tex]

A) Find the rate of disappearance of [tex]N_2O_5[/tex] from t = 0 s to t = 200s

[tex]Rate = \frac{1}{2}(\frac{-\delta N_2O_5}{\delta t})\\\\Rate = -\frac{1}{2}(\frac{0.066 - 0.100}{200 - 0})\\\\Rate = 8.5*10^{-5}[/tex]

B) Find the rate of appearance of [tex]NO_2[/tex] from t = 0 s to t = 200s

According to rate law,

[tex]\frac{1}{2}(\frac{-\delta N_2O_5}{\delta t}) = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\8.5*10^{-5} = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\\frac{\delta NO_2}{\delta t} = 4 * 8.5*10^{-5}\\\\Rate = 3.4*10^{-4}[/tex]

For more information on rate of disappearance

https://brainly.com/question/20708865?referrer=searchResults

Which of the statements about liquids and gases are true?

The particles in liquids and gases can move past one another freely.

Which of the statements about liquids and gases are true?

Both liquids and gases have a definite volume.

The particles in liquids and gases can move past one another freely

Both liquids and gases have a definite shape.

Neither liquids nor gases have a definite shape.

The particles in liquids and gases can move past one another freely.

Answer:

RbF2 + Ca

Explanation:

Since Rb is located in IIA as well as Ca, Rb has ion form Rb2+

Hence CaF2 + Rb → RbF2 +Ca

Please be reminded, this answer may not be 100% correct

Answer:

The theory of continental drift is most associated with the scientist Alfred Wegener. In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other.

Explanation:

PLEASE MARK ME AS BRAINLIEST

Answer:

The scientist Alfred Wegener.

Explanation:

Answer:

Na2O (the 2 is small the o is not a 0 but and OOh)

Explanation:

Hey there, The formula for the compound formed between sodium and oxygen will be Na2O

Though since sodium is a metal and oxygen is a nonmetal, Na2O is expected to be ionic.

An ionic compound is a chemical compound made up of ions held together by electrostatic forces known as ionic bonding.

To determine an ionic compound's formula, first identify the cation and record its symbol and charge.

After that, identify the anion and record its symbol and charge. Finally, mix the two ions together to make an electrically neutral compound.

After two or more atoms lose or gain electrons to form an ion, an ionic bond can form.

Ionic bonds form when metals lose electrons and nonmetals gain electrons. Ions with opposite charges attract each other, forming an ionic bond.

The symbol for sodium is Na+, and the symbol for oxygen is O2. The resulting compound here in the given condition is Na2O.

Thus, this is the formula for the ionic compound formed between sodium and oxygen.

For more details regarding ionic compounds, visit:

https://brainly.com/question/9167977

#SPJ2

Answer:

Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case.

Explanation:

Answer:

a = 2m/s²

Explanation:

Given data:

Mass of sofa = 150 Kg

Force applied = 300 N

Acceleration = ?

Solution:

Formula:

F = ma

F = force

m = mass

a = acceleration

by putting values,

300 N = 150 Kg × a

a =  300 N /150 Kg

a = 300 Kg m/s² / 150 Kg   ( N = Kgm/s²)

a = 2m/s²

Answer: C- one should have high electron affinity and the other low ionization energy.

Explanation:

Ionization energy is the energy required to remove the electron from an isolated gaseous atom.

Electron affinity is the tendency of an isolated atom to attrcat the electrons towards itsellf.

An ionic bond is formed when an element completely transfers its valence electron to another element. The element which donates the electron is known as electropositive element or the metal and it can donate electron easily if it has low ionization energy.

The element which accepts the electrons is known as electronegative element or non metal and it can easily accept the electron if it has high electron affinity.

Answer:

I think the answer is A the Afracan plate

Explanation:

hope this helps:)

Answer:

13 M

Explanation:

Molar mass of AgCIO4 = 207 g/mol

Number of moles of AgCIO4= 134/207= 0.65 moles

Number of moles= concentration × volume

Concentration = number of moles/volume

Concentration = 0.65 × 1000/50 = 13 M

Answer:

7x10⁴.

Explanation:

Hello!

In this case, when rounding big number to a representation with less significant figures than it, we need to make sure we remove the spare figures and round up whether the next digit is five or more.

In such a way, for 74,000, we notice that 4 is not enough to round up the 7, that is why the number would contain a 7 only; moreover, to get rid of the thousand places, we need to introduce an exponent in 4 places, which means that the result would be:

7x10⁴.

Best regards!

Answer:

XY4Z2- dsp2

XY4Z- sp3d

XY5Z- sp3d2

XY2Z3- sp3d

XY2Z- sp2

XY3Z- sp3

XY2Z2- sp3

XY3Z2- sp3d

XY2 - sp

,XY3- sp2

XY4- sp3

,XY5- sp3d

XY6- sp3d2

Explanation:

In the answer box I have shown the hybridization patterns of the various arrangement of bond pairs and lone pairs.

Hybridization was put forward to explain the shapes of molecules under the valence bond theory. All molecules having the same hybridization pattern are based on the same geometry. Deviations from the expected geometry may arise due to the presence of lone pairs.