hi, solution, help me please.​

Answer:

input process and output hehe

Explanation:

hope it helps you

pls mark this ans brainlist ans

Answer:

Direct memory access (DMA) is a process that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations and this process is managed by a chip known as a DMA controller (DMAC).

Explanation:

A defined portion of memory is used to send data directly from a peripheral to the motherboard without involving the microprocessor, so that the process does not interfere with overall computer operation.

In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added.

ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. The ISA DMA controller has 8 DMA channels, each one of which associated with a 16-bit address and count registers.

ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.

A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:

DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.

A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.

With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. The data block can be transferred to and from memory by the DMAC in three ways.

In burst mode, the system bus is released only after the data transfer is completed. In cycle stealing mode, during the transfer of data between the DMA channel and I/O device, the system bus is relinquished for a few clock cycles so that the CPU can perform other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller. In transparent mode, the DMAC can take charge of the system bus only when it is not required by the processor.

However, using a DMA controller might cause cache coherency problems. The data stored in RAM accessed by the DMA controller may not be updated with the correct cache data if the CPU is using external memory.

Solutions include flushing cache lines before starting outgoing DMA transfers, or performing a cache invalidation on incoming DMA transfers when external writes are signaled to the cache controller.

Answer:

See explanation

Explanation:

DMA [tex]\to[/tex] Direct Memory Access.

The peripherals of a computer system are always in need to communicate with the main memory; it is the duty of the DMA to allow these peripherals to transfer data to and from the memory.

The first step is that the processor starts the DMA controller, then the peripheral is prepared to send or receive the data; lastly, the DMA sends signal when the peripheral is ready to carry out its operation.

The corresponding frequency of this sinewave, in kHz, expressed to 3 significant figures is: 155 kHz.

Given the following data:

Note: μs represents microseconds.

Conversion:

1 μs = [tex]1[/tex] × [tex]10^{-6}[/tex] seconds

645 μs = [tex]645[/tex] × [tex]10^{-6}[/tex] seconds

To find corresponding frequency of this sinewave, in kHz;

Mathematically, the frequency of a waveform is calculated by using the formula;

[tex]Frequency = \frac{1}{Period}[/tex]

Substituting the value into the formula, we have;

[tex]Frequency = \frac{1}{645\; * \;10^{-6}}[/tex]

Frequency = 1550.39 Hz

Next, we would convert the value of frequency in hertz (Hz) to Kilohertz (kHz);

Conversion:

1 hertz = 0.001 kilohertz

1550.3876 hertz = X kilohertz

Cross-multiplying, we have;

X = [tex]0.001[/tex] × [tex]1550.39[/tex]

X = 155039 kHz

To 3 significant figures;

Frequency = 155 kHz

Find more information: https://brainly.com/question/23460034

To manage a modern IT environment characterized by hybrid complexity and exponential data growth — and to make that same IT a driver of growth and innovation for the business — you need to build intelligence into every layer of your infrastructure.

Change management plays a major role in transforming a client  business into a data-driven, intelligent enterprise in: data culture and literacy.

Data culture and literacy refer to all the processes involved in analyzing and understanding data within the framework of an organization.

The employees within such organizations are trained to read and understand data. It becomes a part of the organization's culture.

So data culture and literacy should be used when trying to transform a client  business into a data-driven, intelligent enterprise.

Learn more about data culture here:

https://brainly.com/question/21810261

Answer:

Coding is simply how we communicate with computers. Code tells a computer what actions to take, and writing code is like creating a set of instructions

Explanation:

Computer coding empowers kids to not only consume digital media and technology, but to create it. Instead of simply playing videogame or envision what their own website, or app might look like and they'll have the outlet for the expression

The inside attacker should be a non-intentional threat actor that represents the most common threat.

The following information related to the inside attacker is:

Therefore we can conclude that The inside attacker should be a non-intentional threat actor that represents the most common threat.

Learn more about the threat here: brainly.com/question/3275422

Answer:

i dont know

Explanation:

Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah

B.View

Office 92 sering disebut juga dengan

A.Office 3.0

Answer:

vxxgxfufjdfhgffghgfghgffh

Answer:

the answer is priming read

Explanation:

hope it helps u

Answer:

G-code and C++ can be used

Answer:

A computer is an electronic device that accept raw data and instructions and process it to give meaningful results.

Answer:

phone grows everyday 82 percent

Explanation:

Answer:

Code:

import java.util.*;  

public class Greetings  

{  

   public static void main(String[] args)  

   {        

       Scanner s = new Scanner(System.in);  

       System.out.println(getGreetings(s));  

   }  

   private static String getGreetings(Scanner console)  

   {          

   System.out.print("Please enter your first name: ");  

   String firstName=console.next();    

   char firstChar=firstName.toUpperCase().charAt(0);  

   System.out.print("Please enter your last name: ");  

   String lastName=console.next();    

   lastName=lastName.toUpperCase().charAt(0)+lastName.substring(1, lastName.length());  

   System.out.print("Please enter your year of birth: ");  

   int year=console.nextInt();  

   int age=getCurrentYear()-year;  

   return "Greetings, "+firstChar+". "+lastName+"! You are about "+age+" years old.";  

   }  

   private static int getCurrentYear()  

   {  

       return Calendar.getInstance().get(Calendar.YEAR);  

   }  

}

Output:-

Answer:

import pandas as pd

def load_data():

df = pd.read_csv("airline-safety.csv')

num_rows = df.shape[0]

num_cols = df.shape[1]

return df, num_rows, num_cols

Explanation:

Using the pandas python package.

We import the package using the import keyword as pd and we call the pandas methods using the dot(.) notation

pd.read_csv reads the csv data into df variable.

To access the shape of the data which is returned as an array in the format[number of rows, number of columns]

That is ; a data frame with a shape value of [10, 10] has 10 rows and 10 columns.

To access the value of arrays we use square brackets. With values starting with an index of 0 and so on.

The row value is assigned to the variable num_rows and column value assigned to num_cols

Answer:

The security principle being referred to here is:

Resource Encapsulation.

Explanation:

Resource Encapsulation is one of the cybersecurity first principles.  It allows access or manipulation of the class data as intended by the designer. The cybersecurity first principles are the basic or foundational propositions that define the qualities of a system that can contribute to cybersecurity.  Other cybersecurity first principles, which are applied during system design, include domain separation, process isolation, modularization, abstraction, least principle, layering, data hiding, simplicity, and minimization.

The properties and origin of the Cartesian product as stated in the paragraph

is true, and the correct option is option;

a. True

The reason why the above option is correct is stated as follows;

In set theory, the Cartesian product of two number sets such as set A and set

B which can be denoted as lists of numbers is represented as A×B and is the

set of all ordered pair or points (a, b), with a being located in A and b located

in the set B, which can be expressed as follows;

[tex]\left[\begin{array}{c}A&x&y\\z\end{array}\right] \left[\begin{array}{ccc}B(1&2&3)\\\mathbf{(x, 1)&\mathbf{(x, 2)}&\mathbf{(x, 3)}\\\mathbf{(y, 1)}&\mathbf{(y, 2)}&\mathbf{(y, 3)}\\\mathbf{(z, 1)}&\mathbf{(z, 2)}&\mathbf{(z, 3)}\end{array}\right]}[/tex]

The name Cartesian product is derived from the name of the philosopher,

scientist and mathematician Rene Descartes due to the concept being

originated from his analytical geometry formulations

Therefore, the statement is true

Learn more about cartesian product here:

https://brainly.com/question/13266753

Answer:

Explanation:

The following program is written in Java. It is a function that takes in the two parameters, combines them as a String, turns the combined String back into an integer, and uses a series of IF statements to check the parameters and determine which season it belongs to. Then it prints the season to the screen. The code has been tested with the example provided in the question and the output can be seen in the attached image below.

class Brainly {

   public static void main(String[] args) {

       getSeason(4, 65);

       getSeason(4, 11);

   }

   public static void getSeason(int month, int day) {

       String combined = String.valueOf(month) + String.valueOf(day);

       int combinedInt = Integer.parseInt(combined);

       if ((month > 0 && month < 12) && (day > 0 && day < 31)) {

           if ((combinedInt >= 320) && (combinedInt <= 620)) {

               System.out.println("The Season is Spring");

           } else if ((combinedInt >= 621) && (combinedInt <= 921)) {

               System.out.println("The Season is Summer");

           } else if ((combinedInt >= 922) && (combinedInt <= 1220)) {

               System.out.println("The season is Autumn");

           } else {

               System.out.println("The Season is Winter");

           }

       } else {

           System.out.println("Invalid date");

       }

   }

}

An IS manager can keep up with the endless demand for more software to support new information systems by thinking outside the box.

To think outside the box, the IS manager should try the following strategies:

Thus, the IS manager must realize that there are always solutions to every software problem outside the mainstream box.

Learn more about information systems here: https://brainly.com/question/1521627

Answer:

Testing that super user (SYSADMIN) access is limited to only appropriate personnel.

Explanation:

A test for logical access at an organization being audited would include testing that super user (SYSADMIN) access is limited to only appropriate personnel.

Answer:

The statement is:

For number = 0 to 5

Explanation:

Given

The incomplete pseudocode

Required

The loop statement to complete the pseudocode

To loop from 0 to 5, we make use of:

For number = 0 to 5

Where:

number is the integer variable declared on line 1

So, the complete pseudocode is:

Declare Integer number

For number = 0 to 5

Display number

End For

Answer:

The OSI Model (Open Systems Interconnection Model) is a conceptual framework used to describe the functions of a networking system. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.

Answer:

Explanation:

Usually, applications would have the capability of using either one of these options. But for the sake of the question here are some that usually prefer one method over the other.

Any program that targets an API usually uses Sequential access. This is because API's contain all of the data as objects. Therefore, you need to access that object and sequentially navigate that object to the desired information in order to access the data required.

A music application would have access to an entire folder of music. If the user chooses to set the application to randomly play music from that folder, then the application will use a Random Access method to randomly choose the music file to load every time that a song finishes.

Following are the steps of the polynomial-time algorithm:

In a minimum amount of time, this algorithm will determine the best strategy to supply all shops.

Learn more:

polynomial-time algorithm: brainly.com/question/20261998

Answer:

CPU, Program memory, Data memory, Output ports,  Input ports and Clock generator.

Explanation:

There are six basic components of a microcomputer which includes CPU, Program memory, Data memory, Output ports,  Input ports and Clock generator. CPU is the central processing unit which is considered as the brain of the computer. It is the part of a computer that executes instructions. Data memory is the place where data is stored that is present in the CPU.

Answer:

Now, it has been a while since I have written any sort of pseudocode. So please take this answer with a grain of salt. Essentially pseudocode is a methodology used by programmers to represent the implementation of an algorithm.

create a variable(userInput) that stores the input value.

create a variable(celsius) that takes userInput and applies the Fahrenheit to Celsius formula to it

Fahrenheit to Celsius algorithm is (userInput - 32) * (5/9)

Actual python code:

def main():

   userInput = int(input("Fahrenheit to Celsius: "))

   celsius = (userInput - 32) * (5/9)

   print(str(celsius))

main()

Explanation:

I hope this helped :) If it didn't tell me what went wrong so I can make sure not to make that mistake again on any question.    

Answer:

Explanation:

Click the File tab.

Click Print, or press the control p keyboard command.

On the Print screen, select the printer and other settings.

Click Print.

Answer:

answer would be D. I do customer service and would never give information over the phone always give a solution

In order to resolve this problem correctly, you should: D. reset the password and have her check her email account to verify she has the information.

Cybersecurity can be defined as a group of preventive practice that are adopted for the protection of computers, software applications (programs), servers, networks, and data from unauthorized access, attack, potential theft, or damage, through the use of the following;

For web assistance, the security standard and policy which must be adopted to enhance data integrity, secure (protect) data and mitigate any unauthorized access or usage of a user's sensitive information such as username and password, by a hacker, is to ensure the information is shared discreetly with the user but not over the phone (call).

In this context, the most appropriate thing to do would be resetting the password and have the customer check her email account to verify she has the information.

Read more: https://brainly.com/question/24112967

Answer:

false

Explanation:

My teacher quized me on this