How are ions formed ?

​

Answer:

Resistance is a measure of the opposition to current flow in an electrical circuit.All materials resist current flow to some degree. They fall into one of two broad categories: Conductors: Materials that offer very little resistance where electrons can move easily.

Explanation:

Derived quantities are quantities dependent on fundamental quantities while derived units are the units of these quantities

Answer:

D.STATIC FRICTION

Explanation:

Have a nice day

Answer:

Explanation:

A galvanometer which is used for the measurement of a very small current can be converted to a voltmeter when it is connected to a high resistance or a multiplier is a series. The purpose of this is to reduce the amount of current that goes through the galvanometer so as prevent full scale deflection.

Answer:

It will take 1 hr and 15 mins.

Explanation:

Let's look at the speed equation:

s=d/t

We want to find the time, and we have the speed and the distance, so we rearrange the equation. t will be on one side and s and d will be on the other side.

t=d/s

t=60km/(48km/h)

t=1.25h

Answer:

the thin steel wall because that wall is so very to fast broke

Answer:

2.5x10^-3 J

Explanation:

C=50mC

V=10V

U=1/2 C (V)^2

=1/2(50)(10)^2 x (10)^-6

=25(100)/1000000

=2.5x10^-3

Answer:

From the base unit of length, we can define volume, and from the base units of length, mass, and time, we can define energy. ... Volume. Since volume is length cubed, its SI derived unit is m3

Explanation:

Hope it helps

Answer:

Fundamental unit is any unit that is not dependent on other units and other units can be derived from them

Explanation:

Units such as Kilogram, Mass and Time are said to be fundamental units because they are independent.

Differences between Mass and weight;

1. Mass is the measure of the amount of matter in a body while weight is a measure of how the force of gravity acts upon that mass.

2. Mass is a scalar quantity while weight is a vector quantity

x for a smaller magnet at the position marked zin

Answer:

536 miles

Explanation:

If the airplane is running at a speed of 804 miles per hour, and covers a distance, x in a particular number of mile. The distance in mile can be gotten they the application of direct formula. Multiplying the speed by the time it took, and thus

804 mph * 40

Remember the time is in minutes and not hours, so, you convert it to hours.

804 * 40/60 hours =

536 miles

Answer:

-mg = -7.52*9.8 = - 73.696N

Answer:

See image

Explanation:

Plato

Answer:

ans: 13.53 × 10^17 Newton

Answer:

B

Explanation:

Calculate the kinetic energy before and after they hold hands. Then, to find the change in kinetic energy simply subtract the final KE by initial KE.

Answer:

(a) 477 m

(b) 44.6 s

(c) 21.16 m

(d) 19.24 m

Explanation:

initial speed, u = 77km/h = 21.4 m/s

acceleration, a = - 0.48 m/s2

final speed v =  0  

(a) let the stopping distance is s.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s\\\\0 = 21.4^2 - 2 \times 0.48\times s\\\\s = 477 m[/tex]

(b) Let t is time.

Use first equation of motion

v = u + at

0 = 21.4 - 0.48 t

t = 44.6 s

(c) Let the distance is s in first second.

Use second equation of motion

[tex]s = u t + 0.5 at^2\\\\s = 21.4\times 1 - 0.5\times 0.48\times 1\\\\s = 21.4 - 0.24 = 21.16 m[/tex]

(d) distance traveled in 5 th second is given by

[tex]s = u + 0.5 a (2 n - 1) \\\\s = 21.4 - 0.5\times 0.48 \times (2\times 5 -1)\\\\s= 21.4 - 2.16 = 19.24 m[/tex]

Answer:

electrons

In substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. When you rub a piece of iron along a magnet, the north-seeking poles of the atoms in the iron line up in the same direction. The force generated by the aligned atoms creates a magnetic field, hence it acts as a magnet.

the materials that can be magnetized this way are called ferromagnetic materials, but it is not permanent and after some times it loses all the magnetic properties.

please if you find this answer helpful mark it as brainliest

Magnets are formed from iron, nickel, or cobalt when the electrons in their atoms' outer energy levels line up in the same direction that is present in Option A, as the alignment creates a magnetic field that can attract or repel other magnets or magnetic materials.

At the atomic level, electrons orbit the nucleus in shells or energy levels, and electrons have a property called spin, which creates a tiny magnetic field around them. Normally, electrons in an atom have random spin directions, so their magnetic fields cancel each other out and the atom has no overall magnetic field. In some materials, such as iron, nickel, and cobalt, the electrons in the outer energy level can line up in the same direction, creating a net magnetic field. This is known as ferromagnetism.

Hence, magnets are formed from iron, nickel, or cobalt when the electrons in their atoms' outer energy levels line up in the same direction that is present in Option A,

Learn more about the magnets here.

https://brainly.com/question/13026686

#SPJ3

question is incomplete, complete question is below

Magnets are formed from iron, nickel, or cobalt when the ______________________ line up in the same direction.

A)electrons in their atoms' outer energy levels

B)proton explodes

Answer:

A stone floor feels very cold to bare feet in winter, but a carpet in the same room feels comfortably warm.This is because both the floor and the carpet have the same temperature as both are exposed to the same atmosphere. But the former conducts away the heat from the feet better than the carpet as the latter is a non-conductor. So the feet losing more heat, the floor appears cooler to the feet

Explanation:

Hope it may help you!!

Both actually have same temperature. Our feet are warm. Floor is conductor of heat while carpet is not. When we walk on floor, then floor takes away or conducts the heat from our feet, so we feel cold. While carpet doesn't do that, so we feel warm.

Answer:

C option

Explanation:

Hope this helps... pls vote as brainliest

La respuesta correcta para esta pregunta abierta es la siguiente.

A pesar de que no anexas opciones o incisos para responder, podemos comentar lo siguiente.

La importancia de las capacidades físico-motriz que se desarrollan en el futbol de salón son determinantes para desarrollar o maximizar las actividades propias de este deporte con objeto de rendir al máximo y aspirar al mejor de los resultados.

Estas capacidades físico-motrices son las que le permiten a un jugador realizar su máximo esfuerzo, mejorar su desempeño físico y conseguir resultados positivos.

Estamos hablando de la fuerza, la velocidad y la resistencia.

La velocidad es la aceleración que el jugador de futbol necesita para aumentar su velocidad de un punto A, a un punto B, en el menor tiempo posible.

La resistencia es la capacidad del jugador de futbol para mantener ese nivel de aceleración y desempeño, sin bajar su rendimiento. Su capacidad física debe ser resistente para ser constante en su rendimiento físico.

La fuerza es la potencia con la que desempeña los movimiento físicos dentro de la cancha.

Answer:

(a) 12 m/s

(b) At t = 0, x'(t) = 0

At t = 5.0 s, x'(t) = 15 m/s

At t = 10.0 s, x'(t) = 12 m/s

(c) i. The initial velocity = 2.0 cm/s

The initial position = 50 cm

The initial acceleration = 0.125 cm/s²

ii. 16 seconds

2. (a) Approximately 0.85 m/s

(b) 2.094 J

(c) i. Approximately 49.74 m/s

ii. Approximately 86.38°

3. (i) 4·i + 5·j

(ii) -2·i - j - 2·k

(iii) 5·i + 4·j - 3·z

(iv) 8

(v) (a) The magnitude is 2.8 cm, the direction is East

(b) The magnitude is ((14·√3)/5) cm, the direction is North

(c)  The magnitude is ((14·√3)/5), the direction is South

Explanation:

x(t) is given as follows;

x(t) = b·t² - c·t³

Where;

b = 2.4 m/s(²) (we note that the unit of b for the term to be distance in m/s²)

c = 0.120 m/s³

(a) At t = 0, we have;

x(0) = b × 0² - c × 0³ = 0

At t = 10.0 s, we have;

x(10.0) = 2.4 m/s² × (10.0 s)² - 0.120 m/s³ × (10.0 s)³ = 120 m

The average velocity = (Total distance)/(Total time)

∴ The average velocity of the car for the time interval t = 0 to t = 10.0 s, [tex]v_{ave}[/tex], is given as follows;

[tex]v_{ave}[/tex] = (120 m - 0 m)/(10.0 s - 0 s) = 12 m/s

The average velocity of the car for the time interval t = 0 to t = 10.0 s, [tex]v_{ave}[/tex]  = 12 m/s

(b) The instantaneous velocity, [tex]v_{inst}[/tex], is given as follows;

[tex]v_{inst} = \lim \limits_{t \to 0} \left( v_{ave}\right) = \lim \limits_{t \to 0} \left( \dfrac{\Delta x}{\Delta t} \right) = \dfrac{dx}{dt} = x'(t)[/tex]

[tex]x'(t) = \dfrac{d\left (b \cdot t^2 - c \cdot t^3\right)}{dt}[/tex]

x'(t) = 2·b·t - 3·c·t²

At t = 0, x'(t) = 2 × b × 0 - 3 × c × 0² = 0

At t = 5.0 s, x'(t) = 2 × 2.4 m/s² × 5.0 s - 3 × 0.120 m/s³ × (5.0 s)² = 15 m/s

At t = 10.0 s, x'(t) = 2 × 2.4 m/s² × 10.0 s - 3 × 0.120 m/s³ × (10.0 s)² = 12 m/s

(c) x(t) = 50 cm + (2.0 cm/s)·t - (0.0625 cm/s²)·t²

i. The initial velocity is the instantaneous velocity, x'(t), at time, t = 0

x'(t) = 2.0 cm/s - 2 × 0.0625 cm/s² × t

At t = 0, x'(0) = 2.0 cm/s - 2 × 0.0625 cm/s² × 0 = 2.0 cm/s

The initial velocity, x'(0) = 2.0 cm/s

The initial position = The position at time t = 0 = x(0)

x(0) = 50 cm + (2.0 cm/s) × 0 - (0.0625 cm/s²) × 0² = 50 cm

The initial position, x(0) = 50 cm

The initial acceleration, x''(0) = 2 × 0.0625 cm/s² = 0.125 cm/s²

ii. x'(t) = 2.0 cm/s - 2 × 0.0625 cm/s² × t

When the velocity of the turtle, x'(t) = 0 we have;

0 = 2.0 cm/s - 2 × 0.0625 cm/s² × t

∴ t = (2.0 cm/s)/(2 × 0.0625 cm/s²) = 16 seconds

The velocity of the turtle is zero after 16 seconds

2. The mass of the large fish, m₁ = 15.0-kg

The speed of the large fish, v₁ = 1.1 m/s

The mass of the smaller fish, m₂ = 4.50 kg

The speed of the small (stationary) fish, v₂ = 0

The initial momentum = 15.0 kg × 1.1 m/s + 4.50 kg × 0 = 16.5 kg·m/s

The initial momentum = 16.5 kg·m/s

The final momentum = (15.0 kg + 4.50 kg) × v₃ = 19.50 kg × v₃

The final momentum = 19.50 kg × v₃

Where;

The total initial momentum = The total final momentum

We get;

16.5 kg·m/s = 19.50 kg × v₃

∴ v₃ = (16.5 kg·m/s)/(19.50 kg)

v₃ = (16.5/19.50) m/s = (11/13) m/s ≈ 0.85 m/s

∴ The speed of the large fish just after it eats the small, v₃ ≈ 0.85 m/s

(b) The initial kinetic energy, K.E.₁ = (1/2) × 15 kg × (1.1 m/s)² = 9.075 J

The final kinetic energy, K.E.₂ = (1/2) × 19.5 kg × (11/13 m/s)² = 363/52 J

The mechanical energy dissipated, ΔE = K.E.₁ - K.E.₂

ΔE = (9.075 - 363/42) J = 1089/520 J ≈ 2.094 J

The mechanical energy dissipated, ΔE = 2.094 J

(c) i. We have the total momentum = 110 × 8.8· j + 85 × 7.2· i = 9.680·i + 612·i

The velocity after collision, v = (9.680·i + 612·i)/(110 + 85) = 49.64·j + 3.14·i

The magnitude of the velocity, v = √(49.64² + 3.14²) ≈ 49.74 m/s

ii. The direction, θ = arctan(49.64/3.14) ≈ 86.38°

3. (i) [tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = (i + 2·j - k) + 3·i + 3·j + k = 4·i + 5·j

(ii) [tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = (i + 2·j - k) - (3·i + 3·j + k) = -2·i - j - 2·k

(iii) [tex]\underset{A}{\rightarrow} \times \underset{B}{\rightarrow}[/tex] = (2 + 3)·i - (1 + 3)·j + (3 - 6)·z = 5·i + 4·j - 3·z

(iv) [tex]\underset{A}{\rightarrow} \cdot \underset{B}{\rightarrow}[/tex] = 1×3 + 2 × 3 + (-1)×1 = 8

(v) (a) [tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = 2.8·cos(60°)·i + 2.8·sin(60°)·j + (2.8·cos(60°)·i - 2.8·sin(60°)·j

[tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = 5.6·cos 60°·i = 2.8·i

The magnitude = 2.8, the direction is east

(b) [tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = 2.8·cos(60°)·i + 2.8·sin(60°)·j - (2.8·cos(60°)·i - 2.8·sin(60°)·j

[tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = 5.6·sin(60°)·j= ((14·√3)/5)·j

The magnitude = ((14·√3)/5), the direction is North

(c)  [tex]\underset{B}{\rightarrow} - \underset{A}{\rightarrow}[/tex] = (2.8·cos(60°)·i - 2.8·sin(60°)·j - (2.8·cos(60°)·i + 2.8·sin(60°)·j)

[tex]\underset{B}{\rightarrow} - \underset{A}{\rightarrow}[/tex] = -5.6·sin(60°)·j= (-(14·√3)/5)·j

The magnitude = ((14·√3)/5), the direction is South

Answer:

power per square meter = 4.593 × 10^(6) W/m²

Wavelength of peak intensity = 9.67 × 10^(-7) m

Explanation:

From Stefan-Boltzmann law, total emitted power per square meter is given as;

P/A = eσT⁴

where;

P is power

A is surface area

σ = Stefan-Boltzmann constant = 5.67 × 10^(-8) W/m².k⁴

T = temperature of the body = 3000 K

e = emissivity of the substance (for ideal radiation, it has a value = 1)

Thus, Plugging in the relevant values we have;

P/A = 1 × 5.67 × 10^(-8) × (3000)^(4)

P/A = 4.593 × 10^(6) W/m²

Let's find the wavelength of peak intensity.

From wiens displacement law, we know that;

λ_m × T = b

where;

λ_m = maximum wavelength

T = Temperature

b is Wien's displacement constant = 2.9 × 10^(−3) m/K

thus;

λ_m = b/T = (2.9 × 10^(−3))/3000 = 9.67 × 10^(-7) m

Answer:

Here is your answer

Explanation:

1.55 V is the answer

hope u like it

Answer:

Por ela ter batido na trave, não tem como voltar 2x mais forte, por que toda ação correspondente a uma reação de igual intensidade, mas que atua no sentido oposto

Explanation:

1. Fermentation is a metabolic process that produces chemical changes in organic substrates through the action of enzymes. In biochemistry, it is narrowly defined as the extraction of energy from carbohydrates in the absence of oxygen. The science of fermentation is known as zymology.

2. In general, the longer that fermentation goes on, the more sugar is converted into alcohol, resulting in a less sweet (or “drier”) and more alcoholic beverage. To produce beer, various grains are used instead of grapes as the source of sugars. ... This drying process converts the starches present in grain into sugars

Answer:

1.) Fermentation, chemical process by which molecules such as glucose are broken down anaerobically. More broadly, fermentation is the foaming that occurs during the manufacture of wine and beer, a process at least 10,000 years old.

2.) In general, the longer that fermentation goes on, the more sugar is converted into alcohol, resulting in a less sweet (or “drier”) and more alcoholic beverage. To produce beer, various grains are used instead of grapes as the source of sugars. ... This drying process converts the starches present in the grain into sugars.

Explanation:

Answer:

20 = 30 / t1

t1 = 3/2

40 = 30 / t2

t2 = 3/4

average speed = total distance / total time taken

= 30 + 30 / 3/2 + 3/4

= 60 /9/4

= 60 × 4/9

= 26.667

Answer:

EM

Explanation:

The index of refraction is a special property that shows how light travels through different medias. It does not concern itself with the spectrum, only what it will do to that spectrum under laboratory conditions.

Laser light is a very narrow concentrated light form. It is not the entire spectrum, but only a very small part of it.

The answer you want is EM Electromagnetic Radiation

Answer:5m/s² well I am not pretty sure but hope it's help

Explanation:

u=0m

final velocity ,v=50m/s

t=10s

(v-u)/t=(50-0)/10=50/10=5m/s²

Answer:

V²=U² + 2as

Where V=Final Velocity

U=Initial Velocity

a=acceleration ( Deceleration in this case)

s=distance covered

10² = 30² + 2(a)(20)

100 = 900 + 40a

100 - 900 = 40a

-800=40a

a= -800/40

a= -20ms-².

Its negative because the car Decelerated.

Answer:

The accerlation is a derived from the other quantities like change in velocity/time take etc.