Answer:
I believe it's D
Explanation:
they both are worked a lot and it makes the most sense.
The cells in both bicep muscle and heart muscle make energy for contraction and relaxation. Hence, option B is correct.
What is cardiac muscles ?Cardiomyocytes have a rather rectangular form and are short and thin. They have a single nucleus, cell organelles that are identical to those seen in skeletal muscle cells, and many sarcosomes, which supply the energy needed for contraction.
Intercalated discs with gap junctions for diffusion and communication link cardiomyocytes structurally. Myofibrils, which in turn are composed of thick and thin myofilaments, make up the sarcoplasm.
Due to their high energy needs, skeletal muscle cells have many mitochondria that enable them to produce enough ATP. Therefore, the cells in the bicep muscles and cardiac muscles produce energy.
Find more on muscle cells:
https://brainly.com/question/29376561
#SPJ6
Given a balanced chemical equation it is always possible to determine
A)
the physical state of the products and reactants
B)
whether a reaction will or will not take place
C)
the relative number of moles taking part in the reaction
D)
the conditions necessary for the reaction to take place
Answer:
C) the relative number of moles taking part in the reaction
Explanation:
From a balanced chemical equation, it is always possible to determine the relative number of moles taking part in a chemical reaction.
The number of moles is the amount of the reacting specie that makes up a chemical reaction.
In balanced chemical equation, the number of moles of reactants and products must be the same. From this understanding, we can determine the amount of reactants and products needed for a chemical reaction to take place.How many moles are there in 32.4 grams of Na
According to the mole concept, there are 1.4087 moles in 32.4 grams of sodium.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Number of moles in this case is obtained by dividing mass by molar mass that is, 32.4/23=1.4087 moles.
Thus, there are 1.4087 moles in 32.4 g of sodium.
Learn more about moles,here:
https://brainly.com/question/26416088
#SPJ2
Why do nonpolar substances tend to be gases and not liquids or solids?
Answer:
Because the intermolecular interactions are weaker.
Explanation:
Nonpolar substances do not have dipole-dipole or hydrogen bond interactions, which are strong intermolecular interactions that often make the substance liquid or solid. Instead, they must rely on van der Waals forces, which are relatively weaker interactions that are often insufficient to hold the molecules together in liquid or solid form.
The magnitude of intermolecular association in nonpolar substance is much lower than the magnitude of intermolecular association in polar substances.
Polar substances are those substances in which a permanent dipole exists in the molecule. In a molecule having a permanent dipole, the electronegativity difference between the atoms bonded in the molecule is high.
As a result of this high electronegtivity difference between atoms, the molecules interact more intimately hence polar molecules tend to exist mostly as liquids and gases while nonpolar molecules having less intimate intermolecular interaction via dispersion forces exist mostly as gases.
Learn more: https://brainly.com/question/9352088
PLEASE HELP ASAP I NEED THIS THANK YOU SOO MUCH
which of the two chemical equations follow the Law of Conservation of Mass
Equation A: Zn +2HCl —> ZnCl2+ 2H2
Equation B: Zn +2HCl —> ZnCl2 + H2
Equation A: Zn +2HCl —> ZnCl2+ 2H2
Which is an example of potential energy?
Question 7 options:
A fox chasing a mouse
A bowling ball rolling towards the pins
A car sitting at the top of a hill
A kite flying in the air
1. The heat absorbed when ice melts can
be measured in a unit called a
(1) torr
(2) degree
(3) mole
(4) joule
Answer:
joule
Explanation:
Can someone pls help
Every organism has a unique common name.
Group of answer choices
True
False
Plz answer the test end in 20 min
Answer true
Explanation:
Every recognized species on earth (at least in theory) is given a two-part scientific name. ... These naming rules mean that every scientific name is unique. For example, if bluegill sunfish are given the scientific name Lepomis macrochirus, no other animal species can be given the same name
Evaluate each statement and determine which statement is not a determining factor in the formation of intrusive igneous rocks? Group of answer choices Magma cools very fast beneath the Earth's surface None of these Slow cooling allows large crystals to grow The Earth's interior has very high temperatures
Answer: The statement that is not a determining factor in formation of intrusive igneous rocks is 'None of the above' and Magma cools very fast beneath the Earth's surface.
Explanation:
Rocks are naturally occurring solid materials that are made up of different types of minerals which affects it's texture and colours. The three main types of rocks are:
--> sedimentary rocks,
--> metamorphic rocks and
--> igneous rocks.
Igneous rocks are formed from the crystallization and solidification of hot molten rocks which originates from deep within the earth. Depending on where the molten rock solidifies, the igneous rock is divided into two, namely:
--> intrusive igneous rock and
--> extrusive igneous rock.
The INTRUSIVE IGNEOUS rocks are formed within or deep beneath the earth surface when the hot magma SLOWLY cools over millions of years until it solidifies. The slow cooling allows large crystals to grow.
Therefore the statements (None of the above and Magma cools very fast beneath the Earth's surface) are not a determining factor.
Which of the following are examples of chemical energy being released or stored? (2 points)
A boy eating an orange to survive
A car burning gasoline to move
The sun heating a rock
Select two answers
____ Ca3(PO4)2(s) + ____ H3PO4(l) → ____ Ca(H2PO4)2(s) When the equation above is balanced and all coefficients are reduced to lowest whole-number terms, what is the coefficient for H3PO4(l)
The equation can be balanced using suitable integers multiplied either side and can be written as follows:
[tex]\rm Ca_{3} (PO_{4})_{2} + 4 H_{3}PO_{4} \rightarrow 3 Ca (H_{2}PO_{4})_{2}[/tex]
Thus the coefficient of H₃PO₄ is 4.
What is balanced reaction?A balanced chemical equation of a reaction represents all the reactants and products in the perfect stoichiometric ratios where, the number of each element have to be equal in both sides.
The given reaction is an example of combination reaction. The equation can be balanced by equating the number of calcium in the product side by multiplying with 3 and then making the phosphate group also balanced by multiplying by 4 with H₃PO₄.
Thus, the balanced chemical equation written above contains 3 calcium on both side and equal number of phosphate group (6) as well as hydrogens on both side where, the coefficient of H₃PO₄ is 4
To find more on balanced reactions, refer here:
https://brainly.com/question/14263388
#SPJ2
may we met again !
i love you,ella
Answer: When I see you again!
Explanation:
PHYSICAL SCIENCE PLEASE PLEASE HEP DUE TODAY AT 11!! will give brainly if its correct!! <3333 thank you so muchh!!
Which problem cannot be solved using the scientific method?
determining which student reads faster
discovering who invented the radio
discovering how much salt should be used to boil water faster
determining which laundry detergent works best
Answer:
I would say discovering who invented the radio.
Explanation:
The other ones can be solved by experiments and the "discovering who invented the radio" cannot be solved by an experiment.
hope this helps.
Answer:
I would say who invented the ratio
Explanation:
Well you dont need to use the scientific method to know WHO discovered it, you use it to determine HOW
Elements in a ___ on the Period Table of Elements have similar chemical characteristics and properties.
true or false, a temperature of 0°F is equal to 32°C
Answer:
false
Explanation:
Answer:true
Explanation:
Wax melts when it is heated. Which most likely describes what is true of the result of this reaction?
The bonding of the atoms is not the same before and after the change.
The wax has the same density before and after the change.
The same amount of wax exists before and after the change.
The wax cannot be changed back into a solid.
quickly help!!!
Answer:
The same amount of wax exists before and after the change.
Explanation:
Answer:
c -the same amount of wax exists before and after the change-
Explanation:
I did the quiz (edg.) :)
Some notes for you:
A physical change is a change in some of the physical properties of matter, but not in its identity.Wax melting is an energy change, and the energy change can be reversed, which means the wax cools into hard wax again. The wax didn't leave, nor did it somehow get less of it. It stays the same! :)I hope you have an amazing day, I mean it. God bless you!
john 7:37 <3
______cells have long projections that help carry electrical messages to other cells.
O striated
O nerve
O smooth
O muscle
Answer: Nerve cells!
its the nerve cell which carry electrical message to others cell.
What element is this atom?
(Urgent plz help)
Calculate the wavelength of radiation with a frequency of 4.9 ×1014 per second.
Answer in units of meters.
The wavelength-λ = 6.12 x 10⁻⁷ m
Further explanationRadiation energy is absorbed by photons
The energy in one photon can be formulated as
[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]
Where
h = Planck's constant (6,626.10⁻³⁴ Js)
f = Frequency of electromagnetic waves
f = c / λ
c = speed of light
= 3.10⁸ m/s
λ = wavelength
The wavelength of radiation with a frequency of 4.9 ×10¹⁴/s :
[tex]\tt \lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3.10^8}{4.9\times 10^{14}}\\\\\lambda=6.12\times 10^{-7}~m[/tex]
What are three physical properties that could be used to identify gold?
Answer:
solid ,hard, not see through
Explanation:
Answer:
There are many properties out there, so three include bright yellow color, luster shine, and the maleability that determines the durability.
7)
Mg(s) + 2 HCl(aq) + MgCl2(aq) + H2(g)
What type of reaction is shown above?
A)
decomposition
B)
double replacement
C)
synthesis
D)
single replacement
Answer:
D) single replacement
Explanation:
Given reaction:
Mg + 2HCl → MgCl₂ + H₂
The reaction shown above is a single displacement reaction.
In a single displacement reaction, a more reactive atom displaces another from a given compound.
The comparison here is between Mg and H.
On the activity series, Mg is higher and more reactive, it will displace H from the solution of HCl. This
This reaction type is called a single replacement reaction.
How many molecules are present in 3HNO4?
1) 14
2) 18
3) 3
4) 4
Answer:
2
Explanation:
If you take H and N, that is two molecules right off the bat. If you take O4, that makes 6. Take the total of all 6, and multiply it by 3, with equals 18.
3HNO4 = 18
Which best explains the difference between a monomer and a polymer?
A monomer is larger than a polymer.
A monomer contains carbon and a polymer does not.
A polymer contains carbon and a monomer does not.
A polymer is larger than a monomer.
The difference between the monomer and a polymer should be that monomer should be larger than a polymer.
Difference of monomer and a polymer?The monomer represent the molecule type where it has the capability for chemically the bond along with the other molecules with respect to the long chain. While the polymer should represent the chain of the non-specified the no of monomers.
Also, it represent the building blocks of polymers that contain more complex type of molecules
Learn more about polymer here: https://brainly.com/question/13209535
Answer:
A
Explanation:
the reason two atoms would form an ionic compound instead of a covalent compound mainly depends on their
A reaction begins with 130.5g of substance X and substance Y. How many grams of
substance X and Y are there at the end of the reaction?
A) not enough information provided
B) 100g
C) 65.25g
D) 130.5g
Answer:
130.5g
Explanation:
At the of the reaction, the combined mass of X and Y will be 130.5g.
The premise for this conclusion is based on the law of conservation of matter.
This law states that "in a chemical reaction, matter is neither created nor destroyed but changed from one form to another".
In essence, in a chemical reaction, there is no mass loss.
The amount of product in the reaction is expected to be the same as the amount of reactants used in the experiment. When we start with 130.5g then we should end with 130.5g12) Which model of the atom is thought to be true?
a. Protons, electrons, and neutrons are evenly distributed throughout the volume of
the atom.
b. The nucleus is made of protons, electrons, and neutrons.
c. Electrons are distributed around the nucleus and occupy almost all the volume of
the atom.
d. The nucleus is made of electrons and protons.
Answer:
B
Explanation:
The neucles is surrounded by electrons. Electrons occupy most of the volume of the atom.
Atomic Model:
Atoms are the smallest unit of elements, which form bonds with others. In an atom, electrons revolve around the nucleus.
The nucleus is composed of positively charged protons and neutrons. The nucleus occupies a very small part of the atom.
Electrons are negatively charged particles, they are found around the nucleus and occupy most of the part of the atom.
Therefore, The neucles is surrounded by electrons. Electrons occupy most of the volume of the atom.
To know more about Atomic Model:
https://brainly.com/question/1596638
how does an electron emit light?
Answer:
by moving between defined energy levels
whats the formula for density
p =[tex]\frac{m}{V}[/tex]
p equals m over V
hope this helps!!
P = density
m = mas
V = volume
Explanation:
easy
A photon has a wavelength of 299 nm. What is the frequency of this photon?
1. 1×10^16 Hz
2. 1×10^15 Hz
3. 6.65 × 10^−37 Hz
4. 6.65 × 10^−28 Hz
5. 0.00100 Hz
6. 1.98 × 10^−31 Hz
7. 8.97 × 10^10 Hz
8. 1×10^6 Hz
9. 6.65 × 10^−18 Hz
The frequency(f) of this photon : 1 x 10¹⁵ Hz
Further explanationRadiation energy is absorbed by photons
The energy in one photon can be formulated as
[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]
Where
h = Planck's constant (6,626.10⁻³⁴ Js)
f = Frequency of electromagnetic waves
f = c / λ
c = speed of light
= 3.10⁸
λ = wavelength
A photon has a wavelength of 299 nm.
λ = 299 nm = 299 x 10⁻⁹ m = 2.99 x 10⁻⁷ m
The frequency :
[tex]\tt f=\dfrac{3.10^8}{2.99\times 10^{-7}}\\\\f=\boxed{\bold{1\times 10^{15}~Hz}}[/tex]
AR
1. The table below lists some properties of a sample of lauric acid.
Property
Value
hf
Volume
hc
2
Mass
Boiling point
79.6 ml
70.022 g
222°C
Number of
moles
0.350
RT
Which of these is an intensive property of this sample?
Answer:
Boiling point
Explanation:
We define extensive properties as those properties that change with the amount of the substance present. These include; mass, weight, and volume.
Intensive properties, on the other hand, do not change with the amount of the substance present. They are characteristic of the substance. They include; color, melting point, boiling point, electrical conductivity, and physical state at a given temperature.
