How did Jesseca Kusher create her new material?

Answers

Answer 1

Answer:

Jesseca Kusher, an 18-year-old researcher from Spartansburg, S.C., invented a paint-on coating for roofing shingles. Her formula could reduce a home's cooling costs and possibly cut ozone pollution in urban areas...

SUPPORT ME ...........

Answer 2

Answer:

Jesseca created mixtures containing graphite, gypsum, and mica that could be painted on roof shingles.

Explanation:

Hope this helped!!


Related Questions

write the balanced nuclear equation for the radioactive decay of radium-226 to give radon-222, and determine the type of decay

Answers

Answer:

226Ra88→222Rn86+4He2

Explanation:

An α-particle usually consists of a helium nucleus which indicates the type of decay that was undergone in this radioactive process.

During α-decay(alpha decay), an atomic nucleus emits an alpha particle.

In which list are the three compounds above correctly listed in order of increasing boiling point? A) lowest b.p.... isopropanol < isobutane < acetone ...highest b.p. B) lowest b.p.... isobutane < acetone < isopropanol ...highest b.p. C) lowest b.p.... isobutane < isopropanol < acetone ...highest b.p. D) lowest b.p.... acetone < isobutane < isopropanol ...highest b.p. E) lowest b.p.... acetone < isopropanol < isobutane ...highest b.p.

Answers

Answer:

The correct answer is - option B -  lowest b.p.... isobutane < acetone < isopropanol ...highest b.p.

Explanation:

Isobutane has lowest boiling point due to no hydrogen bonding and no diole to dipole interaction found in them. Isobutane only shows weak dispersion force.

Acetone has dipole dipole interaction but due to lack of Hydrogen bonding they have low boiling point than isopropanol but higher than isobutanol.

Isopropanol is the compound that has ability to form hydrogen bonding with other molecule its boiling point is maximum among all three.

Thus, the correct answer is - option B -  lowest b.p.... isobutane < acetone < isopropanol ...highest b.p.

The condition that a reaction takes place without outside help Choose... Solution in which no more solute can be dissolved in the solvent Choose... Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature Choose... The extent of randomness in a system Choose... Sum of the internal energy plus the product of the pressure and volume for a reaction

Answers

Answer:

Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature

Explanation:

The basis of spontaneity in a chemical reaction is that ∆G must be negative. ¡∆G is known as the change in free energy of a system. If ∆G is negative, then the reaction will occur without any external help (the reaction is spontaneous at room temperature).

∆G is given by;

∆G= ∆H -T∆S

Where;

∆H= change in enthalpy of the system

T= absolute temperature of the system

∆S= change in entropy

Hence; when ∆H -T∆S gives a negative result, the reaction proceeds without any external help.

Predict the most likely bond type for the following.

a. Cu (Copper)
b. KCl (Potassium Chloride)
c. Si (Silicon)
d. CdTe (Cadmium Telluride)
e. ZnTe (Zinc Telluride)

Answers

Answer:

The three major types of bond are ionic, polar covalent, and covalent bonds. Ionic occurs majorly between metals and non-metals, which allows sharing of electrons to form an ionic compound. Whereas covalent bonding calls for complete transfer of electrons between atoms. Polar covalent bonds have unequaly shared electron-pair between two atoms.

Explanation:

a. Cu (Copper)- ionic bonding

b. KCl (Potassium Chloride) - ionic bonding

c. Si (Silicon) - covalent bonding

d. CdTe (Cadmium Telluride) - polar covalent bonding

e. ZnTe (Zinc Telluride)- polar covalent bonding

Candle wax melts low temperature, it is not conductive to electricity, it is insoluble in water and partially soluble in solvents nonpolar, like gasoline. Than type of links are present in the candle wax?

A. Electrostatics.
B. Apolar.
C. lónicos.
D. Hydrogen bridges.

Answers

electrostatic and ionic are definitely not the answer because they have high melting point

hydrogen bonds are too weak and not permanent.

so the answer is apolar as it is soluble in polar solvents (water)

Answer:

B. Nonpolar

Explanation:

The low melting point tells you the compound is not ionic, metallic, or a network solid.

It is almost certainly a molecular solid.

It does not conduct electricity, so it is not metallic (which we have already ruled out).

It is insoluble in polar solvents (water) and soluble in nonpolar solvents (gasoline).

Since like dissolves like, the molecule is nonpolar.

The type of links must be nonpolar.

What's the concentration of hydronium ions if a water-base solution has a temperature of 25°C (Kw = 1.0×10–14), with a concentration of hydroxide ions of 2.21×10–6 M? answer options: A) 2.8×10–8 M B) 4.52 ×10–9 M C) 1.6×10–9 M D) 3.1×10–6 M

Answers

Answer:

ITS NOT D. ITS B. 4.52x10^-9 M

Explanation:

Answer:

4.52 ×10–9 M

Explanation:

A voltaic cell is set up as follows: Anode: Zn electrode in a solution of 0.050 M Zn(NO 3 ) 2 Cathode: Pt electrode with 0.500 atm H 2 (g) in 0.010 M HNO 3 a) Write the overall balanced cell reaction.

Answers

Answer:

[tex]Zn(s) + 2H+(aq)\Rightarrow Zn^{2+}(aq) + H_{2}(g)[/tex]

Explanation:

Given that,

Anode : Zn electrode in a solution of 0.050 M Zn(NO₃)₂

Cathode : Pt electrode with 0.500 atm H₂(g) in 0.010 M HNO₃

Anode :

[tex]Zn(s)\Rightarrow Zn^{2+}(aq) + 2e^{-}[/tex]

Cathode :

[tex]2H+(aq)+2e^{-}\Rightarrow H_{2}(g)[/tex]

We need to write the overall balanced cell reaction

Using anode and cathode

[tex]Zn(s) + 2H+(aq)\Rightarrow Zn^{2+}(aq) + H_{2}(g)[/tex]

Hence, This is required answer.

When titrating a strong acid with a strong base, after the equivalence point is reached, the pH will be determined exclusively by: Select the correct answer below:
A) hydronium concentration
B) hydroxide concentration
C) conjugate base concentration
D) conjugate acid concentration

Answers

Answer:

B) hydroxide concentration

Explanation:

Hello,

In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.

After that, due to the fact that the pH is related with the pOH as shown below:

pH=14-pOH

We can directly compute the pH.

Best regards.

How are animals used in vaccine development?

Answers

Answer:

Animals whose certain organs closely match those of humans or have similar genetic makeup are used in vaccine tests because the results can closely resemble those same results on humans.

Explanation:

Answer:

they use them to test the effectiveness of the vaccine.

Explanation:

Calculate the molarity of a solution containing 29g of glucose (C 6 H 12 O 6 ) dissolved in 24.0g of water. Assume the density of water is 1.00g/mL.

Answers

Answer:

whats the ph  ofpoh=9.78

Explanation:

Predict the reactants of this chemical reaction. That is, fill in the left side of the chemical equation. Be sure the equation you submit is balanced.

_______ → Ba(ClO)2 + H2O(l)

Answers

Answer:

2HClO(aq) + Ba(OH)₂(aq) →  Ba(ClO)₂(aq) + 2H₂O(l)

Explanation:

The reaction corresponds to a neutralization reaction between an acid and a base, as follows:

2HClO(aq) + Ba(OH)₂(aq)  →  Ba(ClO)₂(aq) + 2H₂O(l)            

From the equation above we have that the acid HClO reacts with the base Ba(OH)₂ to obtain a salt Ba(ClO)₂ and water.

In the balanced reaction, we have that 2 moles of HClO react with 1 mol of Ba(OH)₂ to produce 1 mol of Ba(ClO)₂ and 2 moles of water.

I hope it helps you!    

If an individual proton has mass 1.007825 amu, and an individual neutron has mass 1.008665 amu, what's the calculated mass of a neptunium-236 nucleus? options: A) 237.92482 amu B) 236.99873 amu C) 237.96682 amu D) 237.04817 amu

Answers

Answer:

C) 237.96682 amu

Explanation:

The symbol for neptunium-236 is given as;

²³⁶₉₃Np

This element has 93 protons and (236 - 93 = 143) neutrons.

Mass Number =Total mass of Protons + Total mass of neutrons

Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu

Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu

Mass = 144.239095 + 93.727725  = 237.96682 amu

Correct option is option C.

Consider the bond dissociation energies listed below in kcal/mol. CH3-Br 70 CH3CH2-Br 68 (CH3)2CH-Br 68 (CH3)3C-Br 65 These data show that the carbon-bromine bond is weakest when bromine is bound to a __________.

Answers

Answer:

The answer is "Tertiary carbon".

Explanation:

Accent to the results, the carbon-bromine bond is weak, whenever, the bromine is connected to tertiary carbon so, bonding energy is separation for methyl-carbon, which is connected to the bromine = 70 kcal/mol and for the primary energy to the secondary energy is=  68 kcal/mol, and for tertiary CO2 = 65 kcal/mol.

The stronger the energy dissociating connection and the weaker, its power dissociation connection and its weaker bond becomes connecting with a tertiary carbon, that's why "Tertiary carbon" is the correct answer.

What will be formed when 2,2,3-trimethylcyclohexanone reacts with hydroxylamine?

Answers

Answer:

Following are the solution to this equation:

Explanation:

In the given-question, an attachment file of the choices was missing, which can be attached in the question and its solution can be defined as follows:

In the given question "Option (iii)" is correct, which is defined in the attachment file.

When 2,2,3-trimethylcyclohexanone reacts with hydroxylamine it will produce the 2,2,3-trimethylcyclohexanoxime.

For the following set of volume/temperature data, calculate the missing quantity after the change is made. Assume that the pressure and the amount of gas remain constant.

V=2.91 L at 23.0 °C
V= 4.20 L at ? °C

Answers

Answer:

155 °C

Explanation:

Step 1: Given data

Initial volume (V₁): 2.91 LInitial temperature (T₁): 23.0°CFinal volume (V₂): 4.20 LFinal temperature (T₂): ?

Step 2: Convert the initial temperature to Kelvin

We will use the following expression.

K = °C + 273.15 = 23.0°C + 273.15 = 296.2 K

Step 3: Calculate the final temperature

Assuming an ideal gas behavior, we can calculate the final temperature using Charles' law.

V₁/T₁ = V₂/T₂

T₂ = V₂ × T₁/V₁

T₂ = 4.20 L × 296.2 K/2.91 L

T₂ = 428 K

Step 4: Convert the final temperature to Celsius

We will use the following expression.

°C = K - 273.15 = 428 - 273.15 = 155 °C

Identify the term that matches each electrochemistry definition. The electrode where oxidation occurs Cathode The electrode where reduction occurs Choose... An electrochemical cell powered by a spontaneous redox reaction Choose... An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction Choose... A chemical equation showing either oxidation or reduction Choose...

Answers

Answer:

An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction

What is pH of a buffer made by combining 45.0mL of 0.150M nitrous acid and 20.0mL of 0.175M sodium nitrate

Answers

Answer:

3.11

Explanation:

Any buffer system can be described with the reaction:

[tex]HA~->~H^+~+~A^-[/tex]

Where is the acid and is the base. Additionally, the calculation of the pH of any buffer system can be made with the Henderson-Hasselbach equation:

[tex]pH~=~pKa~+~Log(\frac{ [A^-]}{[HA]})[/tex]

With all this in mind, we can write the reaction for our buffer system:

-) Nitrous acid: [tex]HNO_2[/tex]

-) Sodium nitrate: [tex]NaNO_2[/tex]

[tex]HNO_2~->~H^+~+~NO_2^-[/tex]

In this case, the acid is [tex]HNO_2[/tex] with a concentration of 0.150 M and a volume of 45.0 mL (0.045 L). The base is [tex]NO_2^-[/tex] with a concentration of 0.175 M and a volume of 20.0 mL (0.020 L).

We can calculate the moles of each compound is we take into account the molarity equation ([tex]M=\frac{mol}{L}[/tex]). So:

-) moles of [tex]HNO_2[/tex]:

[tex]mol=0.150~M*0.045~L=0.00657[/tex]

-) moles of [tex]NO_2^-[/tex]:

[tex]mol=0.175~M*0.020~L=0.0035[/tex]

The total volume would be:

0.020 L + 0.045 L = 0.065 L

With this in mind, we can calculate the molarity of each compound:

-) Concentration of [tex]HNO_2[/tex]

[tex]M=\frac{0.00657~mol}{0.065~L}=0.101~M[/tex]

-) Concentration of [tex]NO_2^-[/tex]

[tex]M=\frac{0.0035~mol}{0.065~L}=0.0538~M[/tex]

The pKa reported is 3.39, therefore we can plug the values into the Henderson-Hasselbach equation:

[tex]pH~=~3.39~+~Log(\frac{[0.0538~M]}{[0.101~M]})~=~3.11[/tex]

The final pH value would be 3.11

I hope it helps!

The pH of a buffer made by combining 45.0 mL of 0.150M nitrous acid and 20.0mL of 0.175M sodium nitrate is 2.87.

We have a buffer made by combining 45.0mL of 0.150 M nitrous acid and 20.0mL of 0.175M sodium nitrate.

Nitrous acid is a weak acid and nitrate ion is its conjugate base.

What is a buffer?

It is a solution used to resist abrupt changes in pH when acids or bases are added.

Step 1: Calculate the moles of each species.

We do so by multiplying the molar concentration by the volume in liters.

HNO₂: 0.150 mol/L × 0.0450 L = 6.75 × 10⁻³ mol

NaNO₂: 0.175 mol/L × 0.0200 L = 3.50 × 10⁻³ mol

Step 2: Calculate the total volume of the mixture.

The total volume will be the sum of the volumes of each solution.

V = 45.0 mL + 20.0 mL = 65.0 mL = 0.0650 L

Step 3: Calculate the molar concentration of each species in the mixture.

HNO₂: 6.75 × 10⁻³ mol/0.0650 L = 0.104 M

NaNO₂: 3.50 × 10⁻³ mol/0.0650 L = 0.0538 M

Step 4: Calculate the pH of the buffer.

We can calculate the pH of a buffer system using Henderson-Hasselbach's equation.

pH = pKa + log [NaNO₂]/[HNO₂]

pH = 3.16 + log 0.0538/0.104 = 2.87

The pH of a buffer made by combining 45.0 mL of 0.150M nitrous acid and 20.0mL of 0.175M sodium nitrate is 2.87.

Learn more about buffers here: https://brainly.com/question/24188850

The concentration of glucose, C6H12O6, in normal spinal fluid is 75 mg/100g. What is the molality of the solution

Answers

Answer:

4.16x10⁻³m

Explanation:

Molality is defined as the ratio between moles of a solute, in this case glucose, and kg of solvent.

As there are 100g of solvent, the kg are 0.1. Thus, we only need to calculate from the mass of glucose its moles to solve the molality of the solution.

Moles glucose:

There are 75mg = 0.075g of glucose. To conver mass to moles it is necessary molar mass.

Molar mass glucose:

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

72.06 + 12.10 + 96 = 180.16g/mol

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Molality of the solution:

4.16x10⁻⁴ moles of glucose / 0.1kg of solvent =

4.16x10⁻³m

The molarity of the solution is 4.16x10⁻³m

Calculation of the molarity:

We know that the molarity refers to the ratio that arise between the moles of a solute.

Since there are 100 g of solvent so here the kg should be 0.1.

Likewise there is 75 mg so it should be 0.075g

Now the Molar mass glucose should be

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

So,

= 72.06 + 12.10 + 96

= 180.16g/mol

Now

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Now finally

Molality of the solution:

= 4.16x10⁻⁴ moles of glucose / 0.1kg of solvent

=4.16x10⁻³m

learn more about molarity here: https://brainly.com/question/13011592

Name the following compound from the concise formula:______.
CH3CH(CH3)CHCHCH(CH3)CH2CH3
A. 2,4-dimethyl-3-heptene
B. 2,5-dimethyl-3-heptene
C. 3,5-dimethyl-3-heptene
D. 2,5-dimethyl-4-heptene

Answers

Answer:

B. 2,5-dimethyl-3-heptene

Explanation:

Answer:

B. 2,5-dimethyl-3-heptene

Explanation:

Which of the following is a salt that could be generated by combining a weak acid and a weak base? Select the correct answer below:
a) NaCl
b) Na2SO4
c) NH4NO3
d) NH4F

Answers

Answer:

d) NH4F

Explanation:

Hello,

In this case, the base resulting from mixing a weak acid and a weak base is d) NH4F since ammonium hydroxide is a wear base and hydrofluoric acid is a weak acid.

Ammonium hydroxide is a weak base since it is not completely ionized in ammonium and hydroxyl ions:

[tex]NH_4OH\rightarrow NH_4^++OH^-[/tex]

Moreover, hydrofluoric acid is a weak acid since it is not completely ionized in hydrogen and fluoride ions:

[tex]HF\rightleftharpoons H^++F^-[/tex]

For the both of the substances, the limit is established by the basic and the acid dissociation constant respectively.

Regards.

What are the products in the following chemical reaction Pb(NO3)+KCI

Answers

Answer:

The products are KNO3 + PbCl2.....

Espero que te sirva.

A student is performing a Benedict’s test on an unknown substance. He adds the reagent (the chemical required to make a color change), and nothing happens. What can he conclude? A- The substance is glucose-based. B- The substance is not glucose-based. C- The test was inconclusive because he needed to also test with iodine or vinegar. D- The test was inconclusive because he forgot to add heat.

Answers

Answer:

The correct answer is : option D. The test was inconclusive because he forgot to add heat.

Explanation:

Benedict's test is a test that is used to confirm the presence of the simple carbohydrates (mono saccharides and some disaccharides). It is a reagent made by mixture of solution of CuSO4 with sodium citrate and Na2CO3.

Benedict's reagent is added to the substance to test and then heated if it turns yellow to orange or red the presence of simple sugar is confirmed.

Thus, the correct answer is : option D. The test was inconclusive because he forgot to add heat.

Answer:

The test was inconclusive because the student forgot to add heat.

Explanation:

If the test revealed it was not glucose, then the student could run these tests. The student, however, does not need these substances to run the glucose test properly.

Calculate the molar solubility of CaF2 at 25°C in a solution that is 0.010 M in Ca(NO3)2. The Ksp for CaF2 is 3.9 x 10-11.

Answers

Answer:

[tex]Molar \ solubility=3.12x10^{-5}M[/tex]

Explanation:

Hello,

In this case, for the dissociation of calcium fluoride:

[tex]CaF_2(s)\rightleftharpoons Ca^{2+}+2F^-[/tex]

The equilibrium expression is:

[tex]Ksp=[Ca^{2+}][F^-]^2[/tex]

In such a way, via the ICE procedure, including an initial concentration of calcium of 0.01 M (due to the calcium nitrate solution), the reaction extent [tex]x[/tex] is computed as follows:

[tex]3.9x10^{-11}=(0.01+x)(2*x)^2\\\\x=0.0000312M[/tex]

Thus, the molar solubility equals the reaction extent [tex]x[/tex], therefore:

[tex]Molar \ solubility=3.12x10^{-5}M[/tex]

Regards.

The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].

The dissociation of calcium fluoride has been given by:

[tex]\rm CaF_2\;\rightarrow\;Ca^2^+\;+\;2\;F^-[/tex]

The solubility constant, ksp has been given as:

[tex]ksp=\rm[Mg^2^+]\;[F^-]^2[/tex]

From the dissociation of Calcium nitrate, the concentration of Ca ion in the solution has been 0.01 M.

The dissociation of Calcium fluoride x M has been resulted in x M Ca and 2x M F ions.

The concentration of Ca in the solution has been resulted as x + 0.01 M.

The solubility product can be given as:

[tex]3.9\;\times\;10^-^1^1=[x+0.01]\;[2x]^2\\3.9\;\times\;10^-^1^1=[x+0.01]\;4x^2\\x=3.12\;\times\;10^-^5[/tex]

The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].

For more information about molar solubility, refer to the link:

https://brainly.com/question/7141822

A sample of argon gas (molar mass 40 g) is at four times the absolute temperature of a sample of hydrogen gas (molar mass 2 g). Find the ratio of the rms speed of the argon molecules to that of the hydrogen. Assume hydrogen molecule has only translational degree of freedom.

Answers

Answer:

Ratio of Vrms of argon to Vrms of hydrogen = 0.316 : 1

Explanation:

The root-mean-square speed measures the average speed of particles in a gas, and is given by the following formula:  

Vrms = [tex]\sqrt{3RT/M}[/tex]

where R is molar gas constant = 8.3145 J/K.mol, T is temperature in kelvin, M is molar mass of gas in Kg/mol

For argon, M = 40/1000 Kg/mol = 0.04 Kg/mol, T = 4T , R = R

Vrms = √(3 * R *4T)/0.04 = √300RT

For hydrogen; M = 1/1000 Kg/mol = 0.001 Kg/mol, T = T, R = R

Vrms = √(3 * R *T)/0.001 = √3000RT

Ratio of Vrms of argon to that of hydrogen = √300RT / √3000RT = 0.316

Ratio of Vrms of argon to that of hydrogen = 0.316 : 1

Based on relative bond strengths, classify these reactions as endothermic (energy absorbed) or exothermic (energy released).
Strongest Bond
A-B
A-A
B-B
C-C
B-C
A-C
1. A2 + C2 rightarrow 2AC
2. B2 + C2 rightarrow 2BC
3. A + BC rightarrow AB + C
4. A2 + B2 rightaarrow 2AB
5. AB + C rightarrow AC + B
a. endothermic
b. exothermic

Answers

Answer:

1. Exothermic 2.  Exothermic 3. Endothermic 4. Endothermic 5. Exothermic.

Explanation:

1. An A-A and a C-C bond results in 2 A-C bonds which are lower than the A-A and C-C bonds so this reaction is exothermic.

2. A B-B bond and a C-C bond results in 2 B-C bonds which are lower than the first 2 bonds so this reaction is also exothermic.

3. There is no bond for single A, a single B-C bond results in a A-B bond and a C molecule. A-B bond is stronger than the B-C bond so the reaction absorbed energy along the way. This shows that it is endothermic.

4. An A-A bond and a B-B bond results in 2 A-B bonds which are stronger than the first two bonds so this reaction is also endothermic.

5. An A-B bond and a C molecule result in an A-C bond and a B molecule. A-C bond is weaker than the A-B bond so there is energy released. This reaction is exothermic.

I hope this answer helps.

Determine the molarity for each of the following solutions A. 1.8×10^4mg of HCL in 0.075L of solutions

Answers

The answer would have to be a

If a substance has a half-life of 55.6 s, and if 230.0 g of the substance are present initially, how many grams will remain after 10.0 minutes?

Answers

Answer:

[tex]m=0.127g[/tex]

Explanation:

Hello,

In this case, for a first-order reaction, we can firstly compute the rate constant from the given half-life:

[tex]k=\frac{ln(2)}{t_{1/2}} =\frac{ln(2)}{55.6s}=0.0125s^{-1}[/tex]

In such a way, the integrated first-order law, allows us to compute the final mass of the substance once 10.0 minutes (600 seconds) have passed:

[tex]m=m_0*exp(-kt)=230.0g*exp(-0.0125s^{-1}*600s)\\\\m=0.127g[/tex]

Best regards.

Using the standard reduction potentials Ni2+(aq) + 2 e‑Ni(s) ‑0.25 volt Fe3+(aq) + e‑Fe2+(aq) +0.77 volt Calculate the value of E°cell for the cell with the following reaction. Ni2+(aq) + 2 Fe2+(aq) →Ni(s) + 2 Fe3+(aq)

Answers

Answer:

The correct answer is - 1.02 V

Explanation:

From the reduction-oxidation reaction:

Ni²⁺(aq) + 2 Fe²⁺(aq) → Ni(s) + 2 Fe³⁺(aq)

Ni²⁺ is reduced to Ni(s) while Fe²⁺ is oxidized to Fe³⁺. Thus, the half reactions are:

Reduction (cathode) : Ni²⁺(aq) + 2 e‑ → Ni(s)                    Eº= ‑0.25 V

Oxidation (anode) :  2 x (Fe²⁺ → Fe³⁺ + e-)(aq)                Eº= -0.77 V

                                -------------------------------------

                     Ni²⁺(aq) + 2 Fe²⁺(aq) → Ni(s) + 2 Fe³⁺(aq)

In order to calculate the Eºcell, we have to add the reduction potential of the reaction in cathode (reduction) to the oxidation potential of the anode (oxidation):

Eºcell= Eºr + Eºo= (-0.25 V) + (-0.77 V) = - 1.02 V

g Which ONE of the following molecules and ions has trigonal planar molecular geometry? (NOTE: You must first determine what the Lewis structure of each substance is.) A) PCl3 B) HCN C) CO3 2– D) H3O+ E) NF3

Answers

Answer: C) [tex]CO^{2-}_{3}[/tex]

Explanation: The Valence Shell Electron Pair Repulsion Model (VSEPR Model) shows bonding and nonbonding electron pairs present in the valence, outermost, shell of an atom connecting to other atoms. It also gives the molecular geometric shape of a molecule.

To determine molecular geometry:

1) Draw Lewis Structure, i.e., a simplified representation of the valence shell electrons;

2) Count the number of electron pairs (count multiple bonds as 1 pair);

3) Arrange electron pairs to minimise repulsion;

4) Position the atoms to minimise the lone pair;

5) Name the molecular geometry from the atom position;

Trigonal planar molecular geometry is a model which molecule's shape is triangular and in one plane. Such molecule has three regions of electron density extending out from the central atom and the repulsion will be at minimum when angle between any two is 120°.

The Lewis structure of each molecule is shown in the attachment.

Analysing each one, it can be concluded that molecule with trigonal planar geometry is [tex]CO^{2-}_{3}[/tex]

A 5-column table with 2 rows. Column 1 is labeled number of protons, with entries 20 and 9; column 2 is number of neutrons, with entries 20 and D; Column 3 is atomic number, with entries A and E; Column 4 is Mass Number, with entries B and 19, and Column 5 is Element (symbol) with entries C and F. Using the periodic table, complete the table to describe each atom. Type in your answers

Answers

Answer:

A    ⇒ 20

B    ⇒ 40

C    ⇒ Ca

D    ⇒ 10

E     ⇒ 9

F     ⇒ F

Explanation:

edge 2021

Answer:

the person above is correct

Explanation:

Other Questions
g When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel 3.2 10-15 m before interacting. From this information, find the time interval required for the strong interaction to occur. a college entrance exam company determined that a score of 25 on the mathematics portion of the exam suggests that a student is ready for When is the net force on an object equal to zero? A. When the object is in motion B. When the object is changing direction C. When the forces acting on the object are balanced D. When inertia is not present pls i need the answers quick Which of the following statements are true? Select all that apply.If the equation were graphed, it would be a horizontal line.Both functions have the same slope.The origin is the y-intercept for the function expressed in the table.The linear equation does not have a y-intercept.The table and the graph express an equivalent function. Please help me... Atoms of elements X, Y and Z have 16, 17 and 19 electrons, respectively. Atoms of argon have 18 electrons. a Determine the formulae of the compounds formed by the combination of the atoms of the elements: (i) X and Z (ii) Y and Z (iii) X with itself. b In each of the cases shown in A (i)(iii) above, name the type of chemical bond formed. c Give two properties you would expect to be shown by the compounds formed in an (ii) and an (iii). For the rational equation,[tex]\frac{x^{2}+5x+6}{x+3}=1[/tex] , what is a valid value of x? Write TRUE or FALSE(a)A 'system' is the part of an organism that carries out a certain function. FACTOR THIS EXPRESSION AS FAR AS POSSIBLE -385y IM GIVING THANKS AND BRAINLIST IF CORRECT. PLEASE HELP ME GUYS What command would you use to place the cursor in row 10 and column 15 on the screen or in a terminal window Webb, Inc. uses a flexible budget for manufacturing overhead based on machine hours. Variable manufacturing overhead costs per machine hour are as follows: Indirect labor $5.00 Indirect materials 2.50 Maintenance .50 Utilities .30 Fixed overhead costs per month are: Supervision $1,200 Insurance 400 Property taxes 600 Depreciation 1,800 The company believes it will normally operate in a range of 4,000 to 8,000 machine hours per month. During the month of August, 2019, the company incurs the following manufacturing overhead costs: Indirect labor $28,000 Indirect materials 16,200 Maintenance 2,800 Utilities 1,900 Supervision 1,440 Insurance 400 Property taxes 600 Depreciation 1,860 Prepare a flexible budget report, assuming that the company used 6,000 machine hours during August. A planar electromagnetic wave is propagating in the x direction. At a certain point P and at a given instant, the magnitude of the electric field of the wave is 0.082 V/m . What is the magnetic vector of the wave at point P at that instant? A) (0.27 nT)k B) (-0.27 nT)k C) (0.27 nT D) (6.8 nT)k E) (-6.8 nT)) The Downtown Parking Authority of Tampa, Florida, reported the following information for a sample of 229 customers on the number of hours cars are parked and the amount they are charged. Number of Hours Frequency Amount Charged 1 16 $ 3 2 34 6 3 51 12 4 39 16 5 34 21 6 16 24 7 9 27 8 30 29 229 a. Convert the information on the number of hours parked to a probability distribution. (Round your answers to 3 decimal places.) Hours Probability 1 2 3 4 5 6 7 8 a-2. Is this a discrete or a continuous probability distribution? b-1. Find the mean and the standard deviation of the number of hours parked. (Do not round intermediate calculations. Round your final answers to 3 decimal places.) b-2. How long is a typical customer parked? (Do not round intermediate calculations. Round your final answers to 3 decimal places.) c. Find the mean and the standard deviation of the amount charged. (Do not round intermediate calculations. Round your final answers to 3 decimal places.) Read the beginning of a narrative about pioneers in the American West: Maisie winced as her brother sang Oh! Susanna yet again. This trip was going to be endless if he didnt find a new songand soon. Samuel! Please! Enough with the Oh! Susanna. I can hardly hear myself think. O, Susanna! Samuel sang even louder. What element of effective narratives is this introduction missing? A. plot B. setting C. conflict D. characters is the square root of 2 between 1.4 and 1,5 Rearrange these sentences into the correct order1. tu / ciel / yeux / dans / m'as / Je / plus / tes / ne / le / regarde / applis / depuis que / pris / mes.2. je / avec / l'orthographe / parle / te / plus / Je / fais / gaffe / depuis que / mes / doigts.3. tu / n'as / plus / depuis que / de / Je / perdu / suis / batterie.Page 1 sur 2 What does an AED do to restart the heart? Simon Corporation manufactures hydraulic valves. The product life of a valve is 4 years. Target average profit margin for Simon 20.00% The company does not expect the manufacturing cost to vary over the next 4 years. Estimated sales volume and the unit selling price of the valve for the next 4 years is given below: Year Sales volume (units) Unit selling price Year 1 40,000 $80.00 Year 2 50,000 $75.00 Year 3 35,000 $50.00 Year 4 25,000 $45.00 What is the allowable unit cost of a hydraulic valve using the target costing model Simplify: 9h-12h=54-23 A. 3h=-77B.3h= 31C.-3h= -31D.-3h= 31 Browse this website documenting the Haymarket Square Riot of 1886. Once you have finished reading some of the materials, write a short reflective essay (2-3 paragraphs) about whether it was fair for the eight men to be put on trial for the riot. Be sure to include your opinion, using specific examples from the lesson and from the web resource. ________ and currency risks are to key country success factors as land costs and ________ are to key region success factors. Labor costs; exchange rates Exchange rates; environmental impact Location of markets; climate Land costs; air and rail systems Cultural issues; zoning restrictions