How did the current change when the circuit was initially closed in Part 2 of this exercise? Explain your answer by referencing Panel 1 and the definitions of a capacitor and of current.

Answers

Answer 1

Answer:

Some current is lost.

Explanation:

Change occur in the current when the circuit was initially closed because in a closed circuit the current moves from the start towards the end of the circuit through various resistors. There is heat produced in the wire when the current flows through the circuit. Due to this heat, some of the current is lost during on his own way. Capacitor is a device used to store an electric charge, having of one or more pairs of conductors separated by an insulator. while on the other hand, electric current is a stream of charged particles, such as electrons moving through conductor or space.


Related Questions

A 72 kg swimmer dives horizontally off a raft floating in a lake. The diver's speed immediately after leaving the raft is 3.8 m/s. If the time interval of the interaction between the diver and the raft is 0.25 s, what is the magnitude of the average horizontal force by diver on the raft?

Answers

Answer:

F = 1094.4 N

Explanation:

From impulse - momentum theorem, we now that ;

Impulse = momentum

Where;

Formula for impulse = force (F) × time(t)

Momentum = mass(m) × velocity(v)

Now, we are given;

Mass of swimmer; m = 72 kg

Speed; v = 3.8 m/s

Time; t = 0.25 s

Thus;

F × t = mv

F = mv/t

F = (72 × 3.8)/0.25

F = 1094.4 N

This value of force is the magnitude of the average horizontal force by diver on the raft.

A penny is dropped into a well. It takes 5 seconds to fall. Calculate the depth of the well in feet.

Answers

Answer:

d=1/2 (a)(t^2)

D = distance

A = acceleration

T = time

acceleration due to gravity is 32 ft/second

so, d=1/2 (32)(5^2)

d=16(25)

d=400

Explanation:

Answer:

400 ft.

Explanation:

D= 1/2 gt^2

=1/2(-32 ft/sec^2)(5 sec^2)

= -(1/2)(32)(25) ft

D= -400 ft, down

what are MA and VR of a lever?​

Answers

Explanation:

Mechanical advantage (MA) = Load/Effort. Velocity ratio (VR) = distance effort moves/ distance load moves in the same time

Describe los cambios en velocidad y aceleración durante las etapas de un salto en paracaídas. Salto desde avioneta

Answers

Answer:

Initially the acceleration is acceleration due to gravity and after that it is zero.

Explanation:

Describe the changes in speed and acceleration during the stages of a parachute jump. Jump from plane

As the person jump with the parachute and till the parachute is not opened, then in this condition, the acceleration is acceleration due to gravity due to which he moves in the downwards direction.

As the parachute is opened, the drag force of air and the buoyant force due to the air acts on the parachute in the upwards direction. So, the net acceleration is zero ad the force due to the gravity is balanced by the drag force and the buoyant force and thus the acceleration if zero and the person is safe.  

If the radius of curvature of a mirror is 15m and the distance of the object from the mirror is 10m. Find the distance of the image from the mirror and the magnification of the object in meter

Answers

Answer:

Data given.

focal length (f)=15m÷2=7.5m

Distance of the object(U)=10m

Image distance (v)=?

Magnification (M)=?

Solution:

From:

1/f=1/u+1/v

1/7.5=1/10+1/v=75

then v=75m

Magnification, M=u/v

=75/10=7.5

Then magnification=7.5

Answer:

v = 30 m and m = 3

Explanation:

Given that,

The radius of curvature of the mirror, R = 15 m

Focal length, f = 7.5 m

Object distance, u = -10 m

We need to find the image distance and the magnification of the object.

Using mirror's formula,

[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}\\\\\dfrac{1}{v}=\dfrac{1}{f}+\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{(7.5)}+\dfrac{1}{(-10)}\\\\v=30\ m[/tex]

The magnification of the object in mirror is given by :

[tex]m=\dfrac{-v}{u}\\\\m=\dfrac{-30}{-10}\\\\m=3[/tex]

So, the distance of the image from the mirror and the magnification of the object are 30 m and 3 respectively.

Find the sum. Express the answer in scientific notation. (1.54 x 10^6)+(6.15 x 10^6)​

Answers

Answer:

[tex] { \tt{(1.54 \times {10}^{6}) + (6.15 \times {10}^{6}) }} \\ = { \tt{(1.54 + 6.15) \times {10}^{6} }} \\ = { \tt{7.69 \times {10}^{6} }}[/tex]

Quickly pls!!! A wave with a wavelength of 0.5 m moves with a speed of 1.5 m/s. What is the frequency of the wave?
A. 2.0 Hz
B. 1.0 Hz
C. 0.33 Hz
D. 3.0 Hz

Answers

Speed/wavelength - 1.5m/s / 0.5 m
The frequency of the wave will be 3 or D.

Explain how you can use the factors of production to produce a fruit juice in a production company

Answers

Answer:

The factors of production include Land, Labour, Capital and Enterpreneurship

Explanation:

The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.

The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.

As a main sequence star exhausts hydrogen in its core, its surface becomes ___ and its energy output per second (luminosity) becomes ____.

Answers

Answer:

b

Explanation:

bc

. A car accelerates uniformly from 0 to 72 km/h in 11.5 seconds.
a) What is the acceleration of the car in m/s2? b) What is the position of the car by the time it reaches the velocity of 72 km/h?​

Answers

Answer:

Explanation:

First job is to convert 72 km/hr to m/s:

[tex]72\frac{km}{hr}[/tex] × [tex]\frac{1000m}{1km}[/tex] × [tex]\frac{1hr}{3600s}[/tex] = 2.0 × 10¹ m/s

Now to find the acceleration which is

[tex]a=\frac{v_f-v_0}{t}[/tex] and filling in:

[tex]a=\frac{2.0*10^1-0}{11.5}=1.7\frac{m}{s^2}[/tex] That's part a. Part b want to know how far the car can get in 11.5 seconds (because that's the time it takes for the car to get to 72 km/hr). Since we know that the car can get 2.0 × 10¹ meters in 1 second, that means that in 11.5 seconds, the car can get 11.5(2.0 × 10¹) which is 230 meters.

Calculate the distance travelled by the car in part Q use the equation distance travelled= average speed x time

Answers

Explanation:

distance travelled = average speed x time

                               =30m/s*100s

                                =3000m

Answer:

3000m

Explanation:

30m/s*100s

3000m

A. A
B. C
C. D
D. B
HELLLP GUYS!!!

Answers

Answer:

B

Explanation:

A body has masses of 0.013kg and 0.012kg in oil and water respectively, if the relative density of oil is 0.875, calculate the mass of the body

Answers

Answer:

the mass of the body is 0.02 kg.

Explanation:

Given;

relative density of the oil, [tex]\gamma _0[/tex] = 0.875

mass of the object in oil, [tex]M_o[/tex] = 0.013 kg

mass of the object in water, [tex]M_w[/tex] = 0.012 kg

let the mass of the object in air = [tex]M_a[/tex]

weight of the oil, [tex]W_0 = M_a - 0.013[/tex]

weight of the water, [tex]W_w = M_a - 0.012[/tex]

The relative density of the oil is given as;

[tex]\gamma_0 = \frac{density \ of \ oil }{density \ of \ water} = \frac{W_0}{W_w} = \frac{M_a -0.013}{M_a -0.012} \\\\0.875 = \frac{M_a -0.013}{M_a -0.012}\\\\0.875(M_a - 0.012) = M_a - 0.013\\\\0.875M_a - 0.0105 = M_a -0.013\\\\0.875M_a - M_a = 0.0105 - 0.013\\\\-0.125 M_a = -0.0025\\\\M_a = \frac{0.0025}{0.125} \\\\M_a = 0.02 \ kg[/tex]

Therefore, the mass of the body is 0.02 kg.

help please correct answer i will mark brainliest​

Answers

Answer:

19.21ms-¹

Explanation:

that is the solution above

Using atomic weight crystal structure and atomic radius data tabulated inside the front cover compute the theoritical densities of alminuim ,nikel......

Answers

Question

Using atomic weight, crystal structure, and atomic radius data tabulated inside the front cover of thebook, compute the theoretical densities of aluminum (Al), nickel (Ni), magnesium (Mg), and tungsten (W), and thencompare these values with the measured densities listed in this same table. The c/a ratio for magnesium is 1.624.

Explanation:

the bodies in this universe attract one another name the scientist who propounded this statement​

Answers

Answer: According to wikipedia Sir Isaac Newton has told this statement.hope its helps you.have a great day. keep smiling be happy stay safe.  

Answer: The scientist named Isaac Newton proposed this universal law of gravitation.

It is given that the bodies in this universe attract one another.

It is required to name the scientist who propounded this statement​.

What is the name of the scientist who propounded this statement​?

According to Newton's law of gravitation, every object in the universe attracts every other object with a force that is proportional to the multiplication of the masses and inversely proportional to the square of the distance between the objects. This is the universal law that means this is a constant term that can't be changed with respect to place which was proposed by Isaac Newton in 1687.

Therefore, Isaac Newton proposed this universal law of gravitation.

Learn more about gravitation here:

https://brainly.com/question/12528243

#SPJ5

The Displacement is 5m. We found that using the
Pythagorean Theorem.
Vector Quantities require both a Displacement and a
Direction.
What direction is this Vector?
South
Northeast
West

Answers

Answer:

A vector can be written as:

(R, θ)

Where R is the magnitude, in this case, we know that the magnitude of the displacement is 5m

Then:

R = 5m

and θ defines the direction, it's an angle measured from the positive x-axis.

(In the image, θ would be the angle located at the point A)

Now, if you look at the image, you can see a triangle rectangle.

Where the adjacent cathetus has a length of 4,

the opposite cathetus has a length of 3 units

the hypotenuse has a length of 5 units.

So we can use any trigonometric rule to find the value of θ, like:

sin(θ) = (opposite cathetus)/hypotenuse

Then:

sin(θ) = 3m/5m

Now we can use the inverse sin function, Asin(x), in both sides

Asin( sin(θ)) = θ = Asin( 3/5) = 36.87°

then the vector is:

(5m, 36.87°)

Now, if we define the positive y-axis as the North, and the positive x-axis as the East.

This vector would point at 36.87° North of East.

(or almost Northeast)

what is gama rays an it's uses​

Answers

Answer:

GAMMA RAYS:

A photon emitted spontaneously by a radioactive substance also : a photon of higher energy than that of an X-ray.

USES OF GAMMA RAYS:

Gamma rays are used in medicine (radiotherapy), industry (sterilization and disinfection), and the nuclear industry. Shielding against gamma rays is essential because they can cause diseases to skin or blood, eye disorders, and cancers.

A car took 5 minutes to travel from town A to town B which are 12km apart.Calculate the average speed of the path.​

Answers

Speed = distance /  time

Speed = 12km /  5 minutes

Speed = 2.4 km per minute

Speed is measured per hour, 1 hour has 60 minutes.

2.4 km per minute x 60 minutes = 144 km per hour

144 km/h

V= s/t = 12*60/5 = 144

a stone of mass 250kg and another stone of mass 400 kg are kept at a distance of 100m what amount of gravitational force develops between them?​

Answers

Explanation:

Hey there!

Given;

Mass of one object (m1) = 250kg

Mass of another object (m2) = 400 kg

Distance (d) = 100 m

Gravitational constant (g) = 6.67*10^-11

Now;

[tex]f = \frac{g.m1.m2}{ {d}^{2} } [/tex]

Keep all values;

[tex]f = \frac{6.67 \times {10}^{ - 11} \times 250 \times 400}{ {(100)}^{2} } [/tex]

Simplify

[tex]f = \frac{6.67 \times {10}^{ - 11} {10}^{5} }{10000} [/tex]

[tex]f = \frac{6.67 \times {10}^{ - 6} }{10000} [/tex]

Therefore, gravitational force is 6.67*10^-10.

Hope it helps!

1. 20kg of water is ejected horizontally in 10s; the speed of the water leaving the nozzle is 30m/s. Calculate the force experienced by a fire-fighter holding the hose. ​

Answers

Answer 60 NEWTON

Explanation:

FORCE = MASS * acceleration

acceleration= VELOCITY / TIME

acceleration= 30 / 10 = 3   M/S2

FORCE = MASS * acceleration

FORCE = 20 *3 = 60 NEWTON

A sample from of water is heated with 5000 J of energy and its temperature goes up by 6 K. What is the mass of the sample?

Answers

Answer:

mass= 0.1993 kg

Explanation:

Using the formula c = Q / (mΔT)

how long will it take a car to go from 0 to 45 km/hr if they are accelerating at 5 km/hr/s?

Answers

Answer:

9 seconds

Explanation:

[tex]acceleration = \frac{final \: speed - initial \: speed}{time \: taken} [/tex]

[tex]5km/ hr/ s = \frac{45 - 0 (km/ h)}{t} [/tex]

cross multiplying

[tex]5t = 45 secs \\ t = 9 \: secs[/tex]

it will take 9secs for the car to go from 0 to 45 km/ h

Which describes an atom that has fewer neutrons than protons and more electrons than protons?

negative compound
positive compound
positive ion
negative ion

Answers

Answer:

Negative ion

.................

Negative Ion

An atom has fewer neutrons than protons and more electrons than protons is a negative ion

a ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. what is the balls overall speed at the top of its trajectory?

Answers

Answer:

30m/ s

Explanation:

this is an example of a projectile, where the path traced by the ball will be a downward parabola.

one must know that the vertical velocity of an object having projectile motion is zero at the top of its trajectory and that the horizontal velocity remains constant throughout.

this means, at the top of the trajectory the ball's overall speed will be equal to its horizontal velocity.

and horizontal velocity is given 30 m/s

hence, overall speed of the ball = 30m/ s

which of the following is not an equation of motion:- v=u+at; s=ut+at; v^2-u^2=2as; s=ut+1/2 at^2​

Answers

Answer:

s=ut+at

its not the equation of motion..

hope it helps stay safe healthy and happy.....

A 5.0 kg block of ice is at rest at the top of a smooth inclined plane. The block is released and slides 2.0 m down the plane. Assuming there is no friction between the block and the surface, calculate
a) the gravitational potential energy at the top of the plane
b) the component of the weight parallel to the plane
c) the acceleration of the block
d) the velocity of the block at the bottom of the plane
e) the kinetic energy at the bottom of the plane. ​

Answers

Answer:

a) 98.1 Joules

b) 49.05 N × sin(θ)

c) 9.81 × sin(θ)

d) The velocity of the block at the bottom of the plane, v is approximately 6.264 m/s

e) 98.1 Joules

Explanation:

The given parameters of the block are;

The mass of the block, m = 5.0 kg

The distance down the plane the block slides, h = 2.0 m

The friction between the block and the surface = 0

Let θ represent the angle of inclination oof the plane

a) The gravitational potential energy, P.E. = m·g·h

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

∴ P.E. ≈ 5.0 kg × 9.81 m/s² × 2.0 m = 98.1 Joules

The gravitational potential energy, P.E. ≈ 98.1 Joules

b) The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex], is given as follows;

[tex]w_{\parallel}[/tex] = w × sin(θ) = m·g·sin(θ)

∴ [tex]w_{\parallel}[/tex] ≈ 5.0 kg × 9.81 m/s² × sin(θ) = 49.05 × sin(θ) N

The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex] ≈ 49.05 N × sin(θ)

c) The component of the weight along the inclined plane = The force with which the block moves along the inclined plane, therefore;

[tex]w_{\parallel}[/tex] = m·g·sin(θ) = m·a

Where a represents the acceleration of the block along the plane

Therefore, by comparison, we have;

g·sin(θ) = a

∴ a ≈ 9.81 × sin(θ)

d) Given that the motion of the block is 2.0 m downwards, we have;

The velocity of the block at the bottom of the plane, v² = 2·g·h

Therefore, v² ≈ 2 × 9.81 m/s²× 2.0 m = 39.24 m²/s²

v = √(39.24 m²/s²) ≈ 6.264 m/s

e) The kinetic energy at the bottom of the plane, K.E. = (1/2)·m·v²

∴ K.E. = (1/2) × 5.0 kg × 39.24 m²/s² = 98.1 J

Please help me with this!!!​

Answers

Answer:

Its all about figuring out what numbers you times by

Explanation:

soooooooooo just x the numbers until you get it right, and i'm guessing your in a school soooo ask your teacher aswell :)

what is the closest to the order of magnitude of the energy rquired to split a nucleus in to its individual protons and neutrons

Answers

Answer:

More than two million electron volts.

Explanation:

More than two million electron volts energy are needed to break or split a deuteron into a proton and a neutron. Nuclear binding energy is the type of energy that is required to split an atom's nucleus into protons and neutrons. The deuteron is an isotope of hydrogen that is composed of a proton and a neutron and it is a stable particle. Very huge amount of energy is needed for the splitting of nucleus due to the presence of heavy particles i.e. proton and neutron.

suppose the pilot starting again from rest opens the throttle part.way at constant acceleration the airboat then covers a distance of 60.0m in 10.0s find the net force action on the boat​

Answers

Answer:

Acceleration is 1.2 m/s^2.

Explanation:

initial velocity, u = 0

distance, d = 60 m

time, t = 10 s  

Let the acceleration is a.

use second equation of motion

[tex]s= u t +0.5 at^2\\\\60 = 0 + 0.5 \times a \times 10\times 10\\\\a = 1.2 m/s^2[/tex]

Now according to the Newton's second law

Force = mass x acceleration

Let the mass is m.

F = m x 1.2 = 1.2 m Newton  

Other Questions
Hammurabi's Law was important because it:A. Established equality for all people.B. Created the first democracy.C. Provided a clear, written system of justice.D. All of the choices are correct. A 2090-kg test rocket is launched vertically from the launch pad. Its fuel (of negligible mass) provides a thrust force so that its vertical velocity as a function of time is given by v(t) =At+Bt^2 , where A and B are constants and time is measured from the instant the fuel is ignited. The rocket has an upward acceleration of 1.50m/s 2 at the instant of ignition and, 1.00 s later, an upward velocity of 2.00 m/s. (a) Determine A and B , including their SI units. (b) At 4.00 s after fuel ignition, what is the acceleration of the rocket, and (c) what thrust force does the burning fuel exert on it, assuming no air resistance? Express the thrust in newtons and as a multiple of the rockets weight. (d) What was the initial thrust due to the fuel? Consider the following reaction at equilibrium. What effect will decreasing the temperature have on the system? DH=+890kJCO2(g)+2H2O(l) CH4(g)+2O2(g)a) the equilibrium constant will increaseb) the reaction will shift to the left in the direction of the reactantsc) the reaction will shift to the right in the direction of the productsd) no effect will be observed What is the general function of enzymes in the human body?O A. They make fatty acids unsaturated.OB. They speed up chemical reactions.O C. They store genetic information.D. They carry instructions for making proteins. Which option is the best example of internal rhyme?A. Becca discovered a moth/ and scared it away with a cloth.B. Cassandra lives / to care for doves / and gaze at leaves.C. I am told / that Tia found / a bar of gold / in Puget Sound.D. He's a wiz in the biz of selling / oil and soil to companies. help its easy but yh still need help lol Fear from inside yourself ishorrordreadterrormystery The logical structure in which one instruction occurs after another with no branching is a ____________. Please show steps as to how to solve this problem Thank you! Help me please!!! Thanks write the expression that represents the phrase: the quotient of 10 and x What is dyabatiesPlease answer what attribute of skeptic would contribute to a good scientific mind Express the following composite numbers as products of prime factors 64 What is the value of the following function when x = 0? = -5y = -2y = -1y = 0 a baseball is thrown vertically upward with an initial velocity of 20m/s. A,what maximum height will it attain? B,what time will elapse before it strike the ground? C,what is the velocity just before it strike the ground? Hardy Company manufactures a single product by a continuous process involving two production departments. The records indicate that $140,000 of direct materials were issued to and $200,000 of direct labor was incurred by Department 1 in the manufacture of the product. The factory overhead rate is $25 per machine hour; machine hours were 5,000 in Department 1. Work in process inventory in the department at the beginning of the period totaled $35,000; and work in process inventory at the end of the period was $25,000. The transfer of production costs to Department 2.Instructions: Prepare entries to record (a) The flow of costs into Department 1 for (1) direct materials (2) direct labor (3) overhead (b) The transfer of production costs to Department 2. How does OOP keep both code and data safe from outside interference andincuse? Reconoce el sujeto y su nucleo en las siguientes oraciones se reunieron los ingenieros y el jefe de la empresa If the bearing of P andQ is145. What is the bearing ofQ from P?