How many valence electrons must Calcium lose when forming an ionic compound with Bromine?
Answer:
2
Explanation:
Can somebody Please Help
Answer:
5425440 μm
Explanation:
From the question given above,
Length (in ft) = 17.8 ft
Length (in μm) =?
Next, we shall convert 17.8 ft to in. This can be obtained as follow:
1 ft = 12 in
Therefore,
17.8 ft = 17.8 ft × 12 in / 1 ft
17.8 ft = 213.6 in
Next, we shall convert 213.6 in to cm. This can be obtained as follow:
1 in = 2.54 cm
Therefore,
213.6 in = 213.6 in × 2.54 / 1 in
213.6 in = 542.544 cm
Finally, we shall convert 542.544 cm to μm. This can be obtained as follow:
1 cm = 10⁴ μm
Therefore,
542.544 cm = 542.544 cm × 10⁴ μm / 1 cm
542.544 cm = 5425440 μm
Therefore, 17.8 ft is equivalent is equivalent to 5425440 μm
can someone please help me, i'll give you a 5 star rating and brainliest answer
Balance the following chemical equation by providing the correct coefficients.
Na + H2O ———— NaOH+H2
Please help!!!!!!!!
Answer:
2, 2, 2, and 1
Explanation:
I put that in and it was correct.
I will need help plz thank you
The Earth's surface is _____ water.
50 %
71 %
97 %
Answer:
71%
Explanation:
Can someone help me with these two questions
What does the salinity of seawater represent?
The concentration of salt dissolve in the ocean
The concentration of all dissolved chemicals in the ocean
The volume of salt in the ocean
the mass of salt in the ocean
Answer:
Salinity is a measure of the 'saltiness' of seawater, or more precisely the amount of dissolved matter within seawater.
Why do molecules with dipole-dipole force have higher melting and boiling points than molecules
that only exhibit London Dispersion force?
Answer:
Because dipole - dipole force is stronger than london dispersion force
Explanation:
Intermolecular forces determines a wide range of physical properties of matter of which melting point is one of them.
Both london dispersion forces and dipole- dipole forces are vanderwaals force.
But diople - dipole forces exists between polar molecules which are molecules with permanent dipoles.
In london dispersion forces the dipole is temporary
Please help due soon fill in the blanks will give brainliest
Answer:
Proton has positive charge (+) and located in nucleus
Electron has negative charge (-) and located in electron cloud
Neutron has neutral charge (0) and located in nucleus
The substance that cannot be broken down into a simpler form by ordinary chemical means is called a __ ?
Answer:
Elements
Explanation:
An element is any substance that cannot be broken down into simpler form by ordinary chemical means.
Elements are distinct substances that cannot be split up into simpler substances. .
Such substances consist of only one kind of atom. There are over hundred elements known till date. Elements are made up of unique atoms. In a chemical reaction, elements combines and rearranges.
A student claims that a large percentage of water on Earth is immediately available to drink. Is he correct? Why or why not?
Answer:
No, the student is not correct. The earth may have a lot of water... but not every part of water is drinkable. Most water is filled with bacteria and or viruses making it not suitable to drink! :)
Explanation:
HOPE THIS HELPS! BRAINLIEST? :)
What is the percent by mass of Nitrogen in Mg(NO3)2?
Answer:
18.888%
Explanation:
Newton wrote the mathematical concepts to prove the _____ shape of planet’s orbits.
spherical
circular
triangular
elliptical
Answer:
Eliptical
Explanation:
While some orbits may seem circular, like Earth's, it is still an ellipse. Planets orbit stars in an elliptical shape, but some come very close to perfect circles. As for the other two, im certain you have never seen a triangular or spherical orbit. Hope this helps.
A model that describes the formation, ______________, and reformation of rocks.
PLZ HELP!!!!!asapnow
Answer:
Friction of wind against the ocean surface
Bohr's model of the atom attempts to explain the idea that
the atom is mostly empty space
O all atoms of one type of element are identical
O energy is quantized
O protons and neutrons are found in the nucleus
Answer:
O energy is quantized
Explanation:
Bohr's model of that atom attempts to explain the idea that energy is quantized within an atomic space.
In 1913 Neils Bohr put forward his own model of the atom based on the quantum mechanics developed by Planck. He suggested that the extranuclear part consists of electrons in specific spherical orbits around the nucleus. As one moves outwards from the nucleus the energy level increases.How much energy is required to melt 2 kg of copper? Use the table below and
this equation: Q = mLfusion
A. 125.6 kJ
B. 9460 kJ
C. 414 kJ
D. 4730 kJ
Answer:
C. 414 kJ
Explanation:
Given parameters:
Mass of copper = 2kg
Unknown:
Amount of energy required to melt the copper = ?
Solution:
To solve this problem, we use:
Q = m L
m is the mass
L is the latent heat of fusion of copper = 207kJ/kg
So;
Q = 2 x 207 = 414kJ
Why do scientist use the scientific method
Answer:
B
Explanation:
scientists always look for evidence
Answer:
Yea its B
Explanation: The person above me legit toke the answer out of my mouth
1pt Twins raised in different families still exhibit similar mannerisms, indicating that at least some behavior is
O A. genetis
OB. environmental
O C. instinctual
OD. learned
The level of CO2 in the blood is detected by chemoreceptors located in the aortic arch
and carotid arteries. These send impulses to either the cardioaccelerator or
cardioinhibitor center in the hypothalamus of the brain, which in turn sends an
impulse to the pacemaker of the heart to increase or decrease heart rate. Draw a
feedback diagram to illustrate what happens to restore homeostasis when blood CO2
rises.
Answer:
The level of CO2 in the blood is detected by chemoreceptors located in the aortic arch
and carotid arteries. These send impulses to either the cardioaccelerator or
cardioinhibitor center in the hypothalamus of the brain, which in turn sends an
impulse to the pacemaker of the heart to increase or decrease heart rate. Draw a
feedback diagram to illustrate what happens to restore homeostasis when blood CO2
rises.
Explanation:
The level of CO2 in the blood is detected by chemoreceptors located in the aortic arch
and carotid arteries. These send impulses to either the cardioaccelerator or
cardioinhibitor center in the hypothalamus of the brain, which in turn sends an
impulse to the pacemaker of the heart to increase or decrease heart rate. Draw a
feedback diagram to illustrate what happens to restore homeostasis when blood CO2
rises.
The diagram below shows the apparatus used to pass a current through copper
sulfate solution.
1 x
Positive electrode
Negative electrode
Copper sulfate solution
What is the name of component X in the diagram above?
point
Fuse
Switch
оооо
Ammeter
O Battery
i think the answer is b) i.e. Switch....
according to me ammeter and battery are already there...
Which equation is balanced in an acidic solution?
Answer:
I think C but it could be D
Explanation:
I would say go for C
How can calcium oxide change directly to limewater?
Wants equation and observation
Answer:
Lime(Calcium Oxide) is a white solid with strongly basic properties.Lime reacts readily with water to produce slaked lime,which is the chemical compound calcium hydroxide.....
When carbon dioxide gas is passed through or over limewater,it turns milky due to the formation of calcium carbonate.
The diagram represents the path of a ball that has been thrown upward. Discuss how the kinetic energy (KE), gravitational potential energy (GPE), and total mechanical energy (ME) change between points A (where the ball is thrown from), B (the highest point reached by the ball), and C (where the ball hits the ground). Ignore friction between the ball and the air. (3 points)
Answer:
Gravitational potential energy: [tex]GPE_{B}>GPE_{A}>GPE_{C}[/tex]
Kinetic energy: [tex]KE_{B}<KE_{A}<KE_{C}[/tex]
Total mechanical energy: [tex]ME_{A}=ME_{B}=ME_{C}[/tex]
Explanation:
The gravitational potential energy is directly proportional to height ([tex]GPE_{B}>GPE_{A}>GPE_{C}[/tex]). Since there are no non-conservative forces, the total mechanical energy is conserved ([tex]ME_{A}=ME_{B}=ME_{C}[/tex]) and the total mechanical energy is the sum of gravitational potential and kinetic energies. Then:
[tex]GPE_{A} + KE_{A} = GPE_{B} + KE_{B} = GPE_{C} + KE_{C}[/tex] (1)
If we know that [tex]GPE_{B}>GPE_{A}>GPE_{C}[/tex], then we conclude the following inequation for the kinetic energy:
[tex]KE_{B}<KE_{A}<KE_{C}[/tex] (2)
Lucy volunteers at an animal shelter, and she takes care of an orange tabby 1 point
cat and her kittens. Some of the kittens have orange markings, but some
have gray markings. What units of genetic material determine how living
things look?
Answer; the answer is variations
The unit of genetic material that determines how living things look is called variations, look below for more description.
What are genetic variations?Hereditary variety alludes to contrasts among the genomes of individuals from similar species. A genome is all the innate data — every one of the qualities — of a creature. Hereditary variety is the distinction in DNA successions between people inside a populace.
For example, the human genome contains somewhere close to twenty and 25 thousand qualities.
Find more information about Genetic variations here:
brainly.com/question/14926046
Give the name of one of the 3 common acids used in chemistry
Answer:
Common strong acids include hydrochloric acid, sulfuric acid, phosphoric acid, and nitric acid. Common weak acids include acetic acid, boric acid, hydrofluoric acid, oxalic acid, citric acid, and carbonic acid.
why can mosquitos stand on water?
A-The mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension.
B-The mosquito is able to walk on the water due to the attraction between water molecules and other non-water molecules, creating surface tension.
Answer:
Mosquitos can stand on water because;
A. The mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension
Explanation:
Surface Tension is the surface property of a liquid which is due to the cohesive forces of attraction between its molecules, that enables it to withstand an external shearing force
The molecules in a liquid maintain a cohesive force between adjacent molecules that keeps all the molecules together such that the liquid has a defined volume
On the surface of the liquid, the cohesive forces between the molecules are shared by only between the adjacent molecules and molecules which are under the surface, and therefore, the attraction is much stronger such that the surface of the liquid is in tension, which is called the surface tension of the liquid
Therefore, the mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension.
How many atoms of beryllium are equal to 0.39 moles of beryllium?
Answer:
2.35 x 10²³atoms
Explanation:
Given parameters:
Number of moles of Be = 0.39moles
Unknown:
Number of atoms = ?
Solution:
To solve this problem:
1 mole of a substance contains 6.02 x 10²³ atoms
0.39 mole of Be will contain 0.39 x 6.02 x 10²³ = 2.35 x 10²³atoms
How many grams are in 2x10^24 formula Units of CaCO3
Answer:
332g
Explanation:
Given parameters:
Formula units = 2 x 10²⁴
Unknown:
Mass of the compound = ?
Solution:
The formula of the compound is:
CaCO₃
6.02 x 10²³ atoms are contained in 1 mole of a compound
2 x 10²⁴ atoms will be made up of [tex]\frac{2 x 10^{24} }{6.02 x 10^{23} }[/tex] = 3.32mole of CaCO₃
Mass of CaCO₃ = number of moles x molar mass
Molar mass of CaCO₃ = 40 + 12 + 3(16) = 100g/mol
Mass of CaCO₃ = 3.32 x 100 = 332g
concept of mole chemistry question
Answer:
How many molecules of water are there in 54 g of H2O H 2 O ? Solution. Molar Mass of H2O H 2 O = 2 + 16 = 18 g/moles. So ,number of moles of H2O H 2 O = Mass/Molar Mass = 54/18 =3 moles. Now 1 moles = 6.022×1023 6.022 × 10 23 molecule.
