How is melting similar to freezing? How is it different?

The amount of gtt/min that should fall into the drip chamber is given as follows:

20.8.

The amount of gtt/min that should fall into the chamber is found applying the proportions considering the amounts given in the problem.

The provider has ordered an i.v. of 5% dextrose in lactated ringer's solution at 125 ml/hr, and the i.v. tubing delivers 10 gtt/ml, hence the amount of gtt per hour is obtained as follows:

gtt/hr = 125 x 10 = 1250.

An hour is composed by 60 minutes, hence, applying this proportion, the amount of gtt/min that should fall into the drip chamber is calculated as follows:

gtt/min = 1250/60 = 20.8.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

Chromate anion is basically situated in the chromate salt. These oxoanions also possess the property of the oxidizing agent. The presence of chromate and dichromate anions results in chemical equilibrium. It is commercially used to prevent corrosion.This is because of Le Chatelier's Principle.

According to the Le Chatelier principle, when a dynamic equilibrium system is perturbed by a change in, say, pressure, temperature, or the concentration of products or reactants, the equilibrium will shift in the opposite direction to make up for the disturbance.

To further grasp this idea, consider the following example:

in the case of an equilibrium general reaction:

A (g) + B (g) <=> C (g) + D (g) (g) ΔH < 0 (it denotes an exothermic process) (it means an exothermic reaction)

The following is an example of this reaction:

A (g) + B (g) <=> Energy is released when an exothermic reaction occurs between C and D.

If the temperature increases or heat is added, the equilibrium will shift to the left because of the principle.

To learn more on Le Chatelier principle:

https://brainly.com/question/29195371

#SPJ4

1.62 moles of air the toy now contain. At STP, moles can be converted to gas volume and gas volume to moles using molar volume.

An experimental gas law known as Avogadro's law or Avogadro-hypothesis Ampère's connects the volume of a gas to the amount of gas material present. The law is an instance of the ideal gas theory.

At constant temperature and pressure, volume is directly proportional to the number of moles of the gas.

The formula used for solving this type of problems is:

v1 / v2 = n1/ n2

let's plug in the given values in the formula:

5.17 / 8.00 = 1.05 m / n2

n2 = 8.00 * 1.05  /  5.17

n2 = 1.62 moles

So, the toy contains 1.62 moles of air when it's volume is 8.00 Liter.

To learn more about moles refer :

https://brainly.com/question/15356425

#SPJ1

The total binding energy of 80Zr is therefore approximately 4.58MeV.

An isotope is an atom of a particular element that has a different number of neutrons than other atoms of that same element. This difference in the number of neutrons causes the isotopes to have different atomic masses. Isotopes of an element can be either stable or unstable. Stable isotopes are not radioactive and do not decay, while unstable isotopes are radioactive and undergo radioactive decay.

The total binding energy of 80Zr can be estimated using the mass defect of the two isotopes. According to the semi-empirical mass formula, the binding energy of a nucleus is related to its mass defect. The mass defect of the two nuclei can be calculated by subtracting the mass of the separate nuclei from the mass of the combined nucleus.

The mass of 40Ca is 39.96259 amu and the mass of 80Zr is 79.91652 amu. The combined mass of the two nuclei is 119.87911 amu.
The mass defect of the combined nucleus is therefore 119.87911 - 39.96259 - 79.91652 = 0.005 amu,
or 0.005 x 931.5 MeV/amu = 4.58MeV.
The total binding energy of 80Zr is therefore approximately 4.58MeV.

To learn more about isotopes
https://brainly.com/question/364529
#SPJ4

The maximum amount of flammable liquids that can be stored outside of a rated flammable cabinet in a laboratory is 25 number of gallons.

To make certain flammable drinks are remoted from incompatible substances, they need to simplest be saved in a flammable cupboard this is used simplest for the garage of Class three Flammable Liquids. Extra care should be taken now no longer to take flammable drinks into regions of the laboratory which are the usage of incompatible substances.

The most quantity of flammable drinks that you could save in a single flammable cupboard is primarily based totally at the chemical's Flash Point and Boiling Point. No extra than 60 gallons of a Category 1, 2 or three flammable liquid or a hundred and twenty gallons of a Category four flammable liquid can be saved in a Flammable Safety Cabinet.No extra than 25 gallons of flammable drinks will be saved in a room outdoor of an permitted garage cupboard.

Read more about liquid:

https://brainly.com/question/752663

#SPJ4

(a) sp2- hybrid orbital of C1 and p-orbital of O1 , because, central atom i.e. carbon has sp2-hybridization and in surrounded oxygen atom last electrons enters in p-orbital. (b) 1200 bond angle, because shape is trigonal planar.

Atomic orbitals are generally specific through a mixture of numerals and letters that constitute precise residences of the electrons related to the orbitals—for example, 1s, 2p, 3d, 4f. The numerals, referred to as primary quantum numbers, imply strength degrees in addition to relative distance from the nucleus. The simple names s orbital, p orbital, d orbital, and f orbital refer to orbitals with angular momentum quantum number ℓ = 0, 1, 2, and 3 respectively.

To learn more about atomic orbitals check the link below:

https://brainly.com/question/20319149

#SPJ4

Sulfur hexafluoride gas has a mass of 2.8 g and a molecular weight of 0.019 when it is collected at in an evacuated flask with volume of 5.0L

To calculate the moles of sulfur hexafluoride gas, we use the equation given by ideal gas: PV =nRT

Given Pressure of sulfur hexafluoride (P) = 0.090 atm

Volume of the sulfur hexafluoride gas (V) = 5.0 L

Gas constant (R) = 0.0821

Temperature of sulfur hexafluoride gas (T) = 14C+273 = 287K

n = PV/RT = 0.090x5/0.0821x287 = 0.019mol

To calculate mass n = given mass/Molar mass

Molar mass of sulfur hexafluoride = 146.0 g/mol

mass = nxM = 0.019x146 = 2.8g

To learn more about sulfur hexaflouride click here https://brainly.com/question/29582168

#SPJ4

complete question: Sulfur hexafluoride gas is collected at 14.0°C in an evacuated flask with a measured volume of 5.0L. When all the gas has been collected, the pressure in the flask is measured to be 0.090atm . Calculate the mass and number of moles of sulfur hexafluoride gas that were collected. Be sure your answer has the correct number of significant digits.

I doiont know tbh

Explanation:

if the reaction yields 21.1l of nitrogen gas, 40.81g  mass of nan3 in grams would be required to produce this volume at stp

mass of NaN3 (g) = moles of NaN3 (ma) x molar mass of Na N3 (g/mol) = 0-678 mol 65 g/mol =40.81g. A chemical compound's molar mass is described as the weight of a sample of that chemical divided by the quantity of substance in that sample, which is the quantity of moles in that sample, evaluated in moles. The molar mass of a substance is a mass property, not a molecular property. It is the connection between pressure, volume, moles, and temperature. is the volume that one mole of the a chemical substance or a chemical compound takes up. As a result, at STP, the molar volume of a gas is 22.4 litres.

Learn more about mass here:

https://brainly.com/question/17067547

#SPJ4

A radioactive atom emits a cluster of neutrons and protons-235  heavier than an alpha particle in a process known as cluster decay.

Cluster decay, also known as heavy particle radioactivity or heavy ion radioactivity, is a very uncommon form of nuclear decay in which an atomic nucleus generates a small "cluster" of neutrons and protons, more than in an alpha particle but less than a typical binary fission fragment. The cluster size is also produced by ternary fission into three fragments. When the parent nucleus loses protons, it becomes the daughter nucleus, which has an atomic number Zd = Z + Ze and a mass number Ad = A Ae, where Ae = Ne + Ze. [1] For instance

Learn more about Cluster decay here:

https://brainly.com/question/17288824

#SPJ4

If calcium makes up 3.4% by mass of Earth's crust, the grams of calcium present if a sample of Earth's crust has a mass of 1.5 g is 0.051 g.

How to calculate mass?

The mass of an element in a sample can be calculated by multiplying the percent abundance of that element by the mass of sample.

According to this question, calcium makes up 3.4% by mass of Earth's crust. If a sample of Earth's crust has a mass of 1.5 g, the mass of calcium present can be calculated as follows:

mass of calcium = 3.4/100 × 1.5 g

mass of calcium = 0.051 g

Therefore, if calcium makes up 3.4% by mass of Earth's crust, the grams of calcium present if a sample of earths crust has a mass of 1.5 g is 0.051 g.

Learn more about mass at: brainly.com/question/14651380

#SPJ4

Ore veins and disseminated deposits are  differ in terms of their size, shape, and distribution.

An ore vein is a large, continuous body of mineral deposits that are typically found in fractures or voids in rock formations. Ore veins are typically formed when minerals that are dissolved in water fill a void or crack in a rock formation. Ore veins are typically quite large and can be several meters in width and several kilometers in length. They are also typically found at depths of several hundred meters or more. Ore veins are generally easier to mine because they are more concentrated and can be more easily accessed through underground mining methods.

A disseminated deposit, on the other hand, is a type of mineral deposit that is dispersed or scattered throughout a larger rock formation. Disseminated deposits are usually smaller and less concentrated than ore veins and are typically found at shallower depths. They are often harder to mine because the minerals are not as concentrated and are more dispersed throughout the rock formation

To know more about  ore visit : https://brainly.com/question/89259

#SPJ4

Answer: Atomic mass is associated with the number of neutrons and protons that are present in a particular nucleus of an element. Atomic number is usually the number of protons present in an element's nucleus

If you want to find the number of protons and electrons you look at the atomic number. If you want to find the number of neutrons you need to subtract the atomic number from the mass. If the mass have something like 35.453 the mass will be 35. But if it's like 10.811 the mass will be 11 because if the number after the decimal is five or higher then the number before the decimal will go up one.

Explanation:

The initial and final states if an electron in hydrogen emits a photon with a wavelength of 656 nm  is n = 3 to n = 2.

given that :

wavelength of the photon emitted λ = 656 nm = 656 × 10⁻⁹ m

the energy of the photon is given as :

E = hc / λ

  = (6.626 × 10⁻³⁴ × 3 ×10⁸ ) / 656 × 10⁻⁹

  = 3 × 10⁻¹⁹ J  = 1.9 eV

En = - 13.6 / n² eV

where n = 1,2,3 ....

1) n = 2 to n = 1

E2 - E1 = - 13.6 eV ( 1 / 4 - 1/ 1)

           = 10.2 eV

2) n = 3 to n = 2

E3 - E2 = -13.6 eV ( 1/3² - 1/ 2² )

            = 1.9 eV

Thus the initial and the final states are n = 3 to n = 2.

To learn more about wavelength here

https://brainly.com/question/29892125

#SPJ4

Substance is fast acting, either immediately suffocating the victim or causing massive burning is chemical weapons.

Chemicals used to intentionally kill or damage people through their poisonous qualities are known as chemical weapons. Chemical weapons also include weapons, apparatus, and other gear made expressly for turning hazardous substances into weapons.

What chemical weapon has the highest lethality?

What VX is VX is a nerve toxin that was created by humans for use in chemical warfare. The most dangerous and quickly acting of the known chemical warfare agents are nerve agents.

Basically, these weapons were just common munitions like grenades and artillery rounds that had well-known industrial chemicals added to them. Among the chemicals employed were chlorine, mustard gas, which causes terrible skin burns, and phosgene, a choking toxin.

The most critical effects are paralysis of the respiratory muscles and inhibition of the respiratory center. Ultimately, death results due to respiratory paralysis. If the concentration of the nerve agent is high, death is immediate.

To learn more about chemical weapons. visit:

https://brainly.com/question/20291303

#SPJ4

Answer:

39.0

Explanation:

Because ddNTPs are only intended to be added occasionally to ensure that strands of all lengths are produced, dNTPs are used at the highest concentrations in sequencing reactions.

The DNA sequencing response consists of four major ingredients: "Template" Genetic material copied by E. coli; free bases, this same four types of DNA building blocks; short dna called "primers"; and Enzyme dna, the enzyme which copies DNA. The reaction is began by heating the two dna strands till the they separate. The template then anneals/binds towards its intended location, and DNA polymerase begins elongating it. If expected to complete, a fresh dna strand would be formed. A nucleoside triphosphate contains a trna molecule bound to a 5-carbon sugar with phosphate groups bound to the sugar. They are the single - molecule forerunner of both DNA and RNA, that are chains of nucleotides formed during the DNA replication process.

Learn more about  sequencing reactions here:

https://brainly.com/question/4082154

#SPJ4

The option that is an intensive property is brittle (option C).

Intensive property of a material is that property that does not depend on the amount or shape of the material, a property of the material at a specific point in space.

The properties of matter that do not depend on the size or quantity of matter in any way are referred to as an intensive property of matter.

Intensive properties of matter include the following: temperature, density, colour, melting and boiling point, etc., because they will not change with a change in size or quantity of matter.

Therefore, brittleness is an intensive property of a material.

Learn more about intensive property at: https://brainly.com/question/13733851

#SPJ1

The enthalpy of vaporization for this compound is 22.0 kJ/mol.

Vaporization is a process in which a liquid or solid is transformed into a gaseous state. It occurs when molecules in the liquid or solid absorb enough energy to break their intermolecular bonds and become a gas. This process can be carried out either through the application of heat or pressure, or through a process known as sublimation, which occurs when a solid is exposed to a vacuum.

ΔHₙ = ΔHₓ - ΔHₐ

Where, ΔHₙ = Enthalpy of vaporization

ΔHₓ = Enthalpy of sublimation (32.4 kj/mol)

ΔHₐ = Enthalpy of fusion (10.4 kj/mol)

ΔHₙ = 32.4 - 10.4

ΔHₙ = 22.0 kJ/mol

The enthalpy of vaporization for this compound is the difference between the enthalpy of sublimation and the enthalpy of fusion. Therefore, the enthalpy of vaporization for this compound is 22.0 kJ/mol.

To learn more about vaporization
https://brainly.com/question/24258
#SPJ4

The rate of appearance of o2 at that moment is 2.80 mol/min.

Calculation :

Recall

aA+bB→ cC+dD

[tex]\frac{d[A]}{a.dt}[/tex] =  [tex]\frac{d[B]}{b.dt}[/tex] =  [tex]\frac{d[C]}{c.dt}[/tex]  =  [tex]\frac{d[D]}{d.dt}[/tex]

Then

[tex]\frac{d[NO_{2} ]}{2.dt}[/tex] =   [tex]\frac{d[NO_{2} ]}{4.dt}[/tex]

Replacing :

[tex]\frac{1.4}{2}[/tex] =   [tex]\frac{d[NO_{2} ]}{4.dt}[/tex]  .......   [tex]\frac{d[NO_{2} ]}{dt}[/tex] = 2.8

Degradation is the first step in the recycling of nutrients that an organism (plant or animal) uses to build its body. This is the process by which dead tissue is broken down and transformed into simpler organic forms.They are the food source for many species that underlie ecosystems.

Decomposition or putrefaction is the process by which dead organic matter breaks down into simple organic or inorganic matter such as carbon dioxide, water, simple sugars and inorganic salts. This process is part of the nutrient cycle and is essential for recycling the finite substances that occupy the physical space of the biosphere. An organism's body begins to decompose shortly after death. Animals such as earthworms also help break down organic matter.

Learn more about decomposition here : https://brainly.com/question/27746877

#SPJ4

Hello,

I hope you and your family are staying safe and healthy!

To balance this chemical equation, we need to make sure that there is the same number of atoms of each element on both sides of the arrow.

We can start by looking at the nitrogen atoms. There is one nitrogen atom on the left side of the arrow, but there are two nitrogen atoms on the right side of the arrow. To balance the equation, we can add a coefficient of 2 in front of N₂ on the left side of the arrow:

2N₂(g) + H₂(g) → NH3(g)

Next, we can look at the hydrogen atoms. There are two hydrogen atoms on the left side of the arrow, but there is only one hydrogen atom on the right side of the arrow. To balance the equation, we can add a coefficient of 3 in front of NH3 on the right side of the arrow:

2N₂(g) + H₂(g) → 3NH3(g)

Now the equation is balanced, with two nitrogen atoms and two hydrogen atoms on each side of the arrow. The smallest possible whole number stoichiometric coefficients are 2 for N₂ and 3 for NH3.

Please give this 5 stars and brainliest if you find it helpful.

Happy Holidays!

The speed of sound in given substances from slowest to fastest: 25°C air, 50°C air, water, steel.

Sound can transmit through liquids, gases, solids, and plasma as longitudinal waves, these are also known as compression waves. Sound waves need a medium to travel so they can be propagated through solids as longitudinal and transverse waves.

Longitudinal sound waves exhibit alternating pressure deviations leading to compression and rarefaction, while transverse waves exhibit alternating shear stress perpendicular to the propagation path.

Waves can cause matter to move up and down but can not carry along with them. As the temperature of the air increases the molecules start to vibrate faster eventually the speed of the sound increase.

The speed of sound is lowest in gases, faster in water, and fastest in steel (solid).

Learn more about sound waves, here:

brainly.com/question/21995826

#SPJ1

The formula for PPM  =100 /1,000,000=0.01 PPM = 100 / 1 , 000 , 000 = 0.01 . i.e concentrations of arsenic should be less than 0.01 *1000 therefore it should be less than 10 ml for 1000ml of water.

This stands for "parts per million" and can alternatively be written as mg/L (milligrams per liter). The mass of a chemical or contamination per volume of water is the unit of measurement here. On a lab report, ppm or mg/L both signify the same thing. It provides information about a substance's density when it is dissolved in water. Examples include total alkalinity, calcium hardness, and free chlorine. A substance has a PPM of 1 if it makes up one millionth of the entire amount of water.

learn more about parts per million(PPM) here:

https://brainly.com/question/14636167

#SPJ4

The solubility of a gas is directly proportional to the pressure and proportional to the temperature.

As we increase the pressure of a gas its collision frequency increases hence solubility increases as we decreases the pressure the solubility decreases. Collision frequency is defined as the collision of atoms on increasing pressure atoms start moving from one place to another. The relationship pressure is linear with solubility. It is defined by Henry's law.

The effect of temperature depends on the nature of solute and solvent.

Basically, as we increase the temperature in gas phase solubility also increases.

To know more about Solubility follow the given link :

https://brainly.com/question/23946616

An explanation of a hypothesis that has been repeatedly tested in experiments and found to be correct is referred to be a scientific theory.

Specific theory is defined as the theories that are limited to certain populations or specific sectors of practice, that concentrate on specific nursing phenomena, and that reflect clinical experience.

'A scientific theory is a well-supported explanation of some part of the natural world, based on a body of facts that have been repeatedly proven via observation and experimentation,' according to the Oxford Dictionary.

Thus, an explanation of a hypothesis that has been repeatedly tested in experiments and found to be correct is referred to be a scientific theory.

To learn more about specific theory, refer to the link below:

https://brainly.com/question/14945983

#SPJ1

Answer: 8N (8 kg/ms")

Explanation: F= M*A

F= (2KG)*(4/MS") = 8N

Answer: Dinitrogen trioxide

Explanation:

The chloride ions  in a mixture of 2mol of barium chloride and 1 mol of potassium chloride are 3 moles

Generally, Barium chloride is an inorganic compound with the formula BaCl2. It is a white solid that is highly soluble in water. It is commonly used as a test for detecting the presence of sulfates in a solution and as a precursor to other barium compounds. Barium chloride is toxic if ingested, so it should be handled with caution.

There are a total of 3 moles of chloride ions in the mixture of 2 moles of barium chloride and 1 mole of potassium chloride.

Barium chloride contains 2 moles of chloride ions, and potassium chloride contains 1 mole of chloride ions, for a total of 2 + 1 = 3 moles of chloride ions.

Read more about Barium chloride

https://brainly.com/question/15296925

#SPJ1

When the dry ingredients of a cake are combined, the result is a mixture. Option 3.

In chemistry, mixtures are substances that are obtained by mixing two or more chemically different substances together with each substance maintaining its chemical identity. In other words, the components of a mixture are still chemically unique and can be separated by physical means.

Mixtures can be homogeneous or heterogeneous. Homogenous mixtures are mixtures in which the components are uniformly dispersed throughout the entire mixture. For heterogeneous mixtures, the components are not uniform throughout the mixture.

Thus, when the dry ingredients of a cake, such as flour, sugar, etc., are combined, what we are going to have is a mixture. Whether this mixture would be homogenous or heterogeneous will depend on the level of mixing. Whatever the case may be, the components can still be separated by physical means.

More on mixtures can be found here: https://brainly.com/question/24898889

#SPJ1