Answer:
C. The mass of a nucleus is subtracted from the mass of its components.
Explanation:
The difference in the mass of a stable nucleus and the combined masses of its constituents (i.e. nucleons) is called “Mass Defect” or “Mass Deficit”. It is denoted by Δm.
Symbolically,
[tex]\Delta m = (Zm_p+Nm_n)-m[/tex]
where,
Δm = mass defect
Z = Atomic Number
[tex]m_p[/tex] = mass of Proton
N = Neutron Number
[tex]m_n[/tex] = mass of Neutron
m = mass of Nucleus
Hence, the correct option is:
C. The mass of a nucleus is subtracted from the mass of its components.
its important please answer
Answer: Well we see that v= u- ft/m
lets say that ft= feet and m= mass
so you divide those and subtract u
leaving you with the value of v which is 13
set up differential equation of angular S.H.M
Answer:
[tex]{ \sf{ \omega \: is \: the \: angular \: velocity}} \\ { \sf{ \theta \: is \: the \: angular \: displacement}}[/tex]
A 9V battery produces a 1.5A current in a piece of wire. What is the resistance of the wire?
8 Ω
9 Ω
6 Ω
7 Ω
Explanation:
Using Ohm's Law and a bit of substitution, we can use voltage divided by current to solve for resistance. Doing that, we'll get 6 Ohm.
The plane of a5cm*8cm rectangular loop of wire is parallel to a 0.19T magnetic field the loop carries a current of 6.2 A. What torque acts on aloop? What is the magnetic moment of the loop?
Answer:
Torque; τ = 4.712 × 10^(-3) J
Magnetic moment; M = 0.0248 J/T
Explanation:
Torque is gotten from the formula;
τ = BIA
Where;
B is magnetic field
I is current
A is area
We are given;
B = 0.19T
I = 6.2A
Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m
Thus;
Area; A = 0.05m × 0.08m = 0.004 m²
Thus;
τ = 0.19 × 6.2 × 0.004
τ = 4.712 × 10^(-3) J
Formula for the magnetic moment is given by;
M = IA
M = 6.2 × 0.004
M = 0.0248 J/T
By how many times will the kinetic energy of a body increase if its speed is tripled? Show by calculation .
Answer:
9 lần
Explanation:
Answer:
Kinetic energy (k.e) varies directly as v² from the formula
K.E=(mv²/2)
if v=3 then K.e =v²=(3)²=9
What is the symbol SI unit of time?
Answer:
second is the SI unit of time
what is the speed of a car that travels 150m in 120 s
Answer:
1.25 m/s
Explanation:
divide 120 by 120 to get one second and then divide 1t0 by 120 to get the number
how do you think the weight and the lift should not be one of the same magnitude
because weight disappear and doesn't show the actual weight in the lift
Which of the following sentences is incorrect about pressure?
i) Pressure depends upon the amount of force applied.
ii) Pressure depends on the area upon which is the force is applied.
iii) Pressure is a vector quantity.
iv) The force acting per unit area is called pressure
Answer:
iii) pressure is a vector quantity.
pete walks at a rate of 4.0 miles per hour for 30 minutes. How far did he walk?
1. Find the temperature when the degrees of the Celsius scale will be one fifth of the corresponding degrees of the Fahrenheit scale
2. How much heat is necessary to warm 500g of water from 20°C to 65°C?
Answer:
F = 9/5 C + 32 conversion from C to F
F = 9/5 * F/5 + 32
25 F = 9 F + 800
16 F = 800
F = 50
Check:
C = 5/9 ( F - 32) = 5/9 (50 - 32) = 10 as requested
Q = c m change in temp
Q = 1 cal/gm-deg C * 500 gm * 45 deg C = 22,500 calories
50 Fahrenheit heat required.
How much heat required?Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems.
F = 9/5 C + 32 conversion from C to F
F = 9/5 * F/5 + 32
25 F = 9 F + 800
16 F = 800
F = 50
The answer is 50 Fahrenheit.
Learn more about heat transfer
https://brainly.com/question15086449
#SPJ2
Joule is equal to:
Awatt x metre
B.watt x second
C. Newton x Metre
D. Both b and c
Answer:
The answer is ( D) i. e both b and c.
20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions
Answer:
D) crystalline solid that conducts current under certain conditions
Explanation:
A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.
Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.
Two forces of equal magnitude F
have a resultant of the same
magnitude F. The angle between the
two forces is
45°
120°
O 60°
O 35°
Answer:
the ans is 120 degree hope it will help
Two difference between thrust and upthrust .
Upthrust is the upward force exerted by fluids on the surface of an object immersed in fluids. Thrust:- It is the force acting perpendicular to the surface. Upthrust:- It is the upward force exerted by the fluid on the surface of an object immersed in liquid.
I hope it's help you
There is the more role of the moon than the sun to occur tides in the oceans,why?
Answer:
The ocean tides on earth are caused by both the moon's gravity and the sun's gravity. ... Even though the sun is much more massive and therefore has stronger overall gravity than the moon, the moon is closer to the earth so that its gravitational gradient is stronger than that of the sun.
The moon plays a larger role than the sun in causing tides in the oceans because it is much closer to Earth and has a stronger gravitational pull on our planet. The gravitational force between two objects is directly proportional to their masses and inversely proportional to the square of the distance between them.
Although the sun is much larger than the moon, its gravitational pull on Earth is much weaker because it is much farther away. The moon, on the other hand, is much smaller than the sun, but it is much closer to Earth and exerts a stronger gravitational force on our planet. This gravitational force causes the water in the oceans to bulge towards the moon, causing high tides.
In addition to the gravitational force, the shape of the ocean basins, the rotation of the Earth, and the positions of the sun and moon also play a role in causing tides. However, the moon's gravitational force is the primary factor that causes tides in the oceans.
If a car starts from rest and attains a velocity of 10m/square in 5 secondscalculate the accerleration
Explanation:
Acceleration = Velocity / Time
Acceleration = 10 / 5
Acceleration = 2m/s ²
If the final velocity is 0. third equation of motion will be
Answer:
vf²=vi²+2a∆x
Explanation:
The third equation of motion gives the final velocity of an object under uniform acceleration given the distance traveled and an initial velocity: v 2 = v 0 2 + 2 a d . v^2=v_0^2+2ad. v2=v02+2ad. The graph of the motion of the object.
which substance is an acid ?
Answer:
According to Arrhenius definition, an acid is a substance that releases hydrogen ion or hydronium ion.
there are also other definition like bronsted and lewis.
I HOPE IT WILL HELP
. Four bars of metal A, B, C and Dare tested for magnetism. B attracts both A and C but not D. D does not attract A, B or C. A and C sometime attract one another and sometimes repel one another. What conclusion can you draw about? (a) Bar A (b) Bar B (c) Bar D
Answer:
a. Bar A is a magnet
b. Bar B is a metal or magnetic material
c. Bar D is a non-magnetic material
Explanation:
a. Bar A
Since B attracts both A and C, it shows that A and C are both magnetic. So, it is either B and A are magnets or B and C are magnets or A and C are magnets. Also, since A and C sometime attract one another and sometimes repel one another, it means that they attract when their poles are opposite and repel when their poles are negative. This show that both A and C are magnets. Thus, A is a magnet.
b. Bar B
Since B is attracted to both A and C and we know that both A and C are magnets, it implies that B is a magnetic material. Since it does not repel either A or C.
c. Bar D
Since D does not attract A, B or C, D is a non-magnetic material. Since, only a magnetic material can be attracted to magnets and we have established that both A and C are magnets and that B is magnetic. Since D is not also attracted to B, it implies that D is thus non-magnetic.
define 1 second time
Answer:
define 1 second time
One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.
Answer:
One part of 86400 part of a day is called one second time.
✌✌✌✌
A motorcycle is moving at a constant velocity of 15 meters/second. Then it starts to accelerate and reaches a velocity of 24 meters/second in 3 seconds. What’s the acceleration of the motorcycle over this time? Use .
A.
9 m/s2
B.
8 m/s2
C.
6 m/s2
D.
5 m/s2
E.
3 m/s2
option E
3m/s square
hope it helped u
V Page 1. What is the acceleration due to gravity at poles in m/s2.if it is 9.78 at the equation ->
Answer:
Chk photo
Explanation:
Why does temperature increase when heat is lost?
Answer:
Since kinetic energy is one of the forms of internal energy, the release of heat from an object causes a decrease in the average kinetic energy of its particles. This means that the particles move more sluggishly and the temperature of the object decreases.
Explanation:
the diameter of circular park is 80 m find its area
You plan to pass alpha particles through a field that contains a consistent type of particle. Which configuration will result in the largest deflection of alpha particles? (1 point)
low-energy alpha particles passing through a field of low mass-number-particles
low-energy alpha particles passing through a field of high mass-number-particles
high-energy alpha particles passing through a field of high mass-number-particles
high-energy alpha particles passing through a field of low mass-number-particles
Answer:
low-energy alpha particles passing through a field of high mass-number-particles
Answer:
low-energy alpha particles passing through a field of high mass-number-particles
Explanation:
A spring has a spring constant of 5 N/m and is stretched 10 m. What its U,?
a. 50 J
b. 70 J
c. 90 J
d. 250 J
Answer
I am not sure but it is may be 50J
I hope that's, this answer is fine.
If a ball has a mass of 5 kg and 100 J of KE, what is its velocity?
[tex]{\fcolorbox{white}{lightgreen}{\bf{\textcircled{$\checkmark$}}{Verified\:answer}}}[/tex]
Mass of ball=m=5kgKinetic energy=KE=100JVelocity=v=?We know
[tex]\boxed{\sf K.E=\dfrac{1}{2}mv^2}[/tex]
[tex]\\ \sf\longmapsto 100J=\dfrac{1}{2}5\times v^2[/tex]
[tex]\\ \sf\longmapsto v^2=100\times \dfrac{2}{5}[/tex]
[tex]\\ \sf\longmapsto v^2=20(2)[/tex]
[tex]\\ \sf\longmapsto v^2=40[/tex]
[tex]\\ \sf\longmapsto v=\sqrt{40}[/tex]
[tex]\\ \sf\longmapsto v=6.2m/s[/tex]
Answer:
6.2m/s
Explanation:
the unit of force and pressure are called derived unit
Answer:
yes
Explanation:
because they can be derived in the form of base units
can anyone please help me
Answer:its most likely c
Explanation:
