How many equivalents are in 0.70 mole of Fe 3+?

Answer:

Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.

The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.

Explanation:

Answer:

[tex]M=0.8M[/tex]

Explanation:

Hello!

In this case, since the presence of silver ions is in AgNO3 only, we can compute their moles by using the volume and concentration of the corresponding salt:

[tex]n_{Ag^+}=2.00L*2.00\frac{mol}{L}=4molAg^+[/tex]

Next, since the total volume of solution C is 5.00 L, the required concentration of silver ions turn out:

[tex]M=\frac{4.00mol}{5L} =0.8M[/tex]

Best regards!

Answer:

237.8L of water would need to be added.

Explanation:

The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).

Then figure out what information you have and what is being found. In this case:

M1 = 54.7 M

V1 = 1092 mL = 1.092 L

M2 = 0.25 M

V2 = unknown

Then solve the equation for whatever you are trying to find.

M1V1=M2V2

V2=M1V1/M2

Now you need to plug everything in.

V2=(54.7M*1.091L)/0.25M

V2=238.93L

That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.

238.93L - 1.091L = 237.8L

Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.

I hope this helps.  Let me know if anything is unclear.

Answer:

glucose and oxygen

Explanation:

Cellular respiration is the aerobic process by which living cells break down glucose molecules, release energy, and form molecules of ATP. Overall, this three-stage process involves glucose and oxygen reacting to form carbon dioxide and water.

Answer:

the yeast did not produce the carbon dioxed needed for the bread to rise.

Explanation:

i am not fooly sure but i think its it

but warn me if i am wrong pweez

Answer:

moles of calcium hydroxide= 21.75 mol

a) 43.5 mol

b) 7.25 mol

Explanation:

Please see the attached picture for the full solution.

Answer:

Of oxygen would be 6 moles (4).

Explanation:

Since it is in a bracket you have to multiply 3 and tge 2 to get 6 oxygens.

Answer:

0.166M

Explanation:

In a neutralization, the acid, H₂SO₄, reacts with a base, KOH, to produce a salt, K₂SO₄ and water. The reaction is:

H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O

To solve this problem, we need to determine moles of H2SO4 and moles of KOH that reacts to find the moles of sulfuric acid that remains after the reaction:

Moles H2SO4:

0.650L * (0.430mol /L) = 0.2795moles H2SO4

Moles KOH:

0.600L * (0.240mol / L) = 0.144 moles KOH

Moles of sulfuric acid that reacts with 0.144 moles of KOH are:

0.144 moles KOH * (1mol H2SO4 / 2 mol KOH) = 0.072 moles of H2SO4 react.

And remain:

0.2795moles H2SO4 - 0.072moles H2SO4 = 0.2075 moles of H2SO4 reamains.

In 0.650L + 0.600L = 1.25L:

Molar concentration of sulfuric acid:

0.2075 moles of H2SO4 / 1.25L =

Answer:

Which best describes a difference between energy transformations in power plants and dams? Only power plants use fossil fuels to transform energy. Only dams use fission to generate thermal energy. ... Only dams use mechanical energy to produce electricity.

Explanation:

HOPE THIS HELP

PICK ME AS THE BRAINLIEST

Answer:

1.22 × 10^22 H atoms

Explanation:

From this question, TNT has the chemical formula: C-H5N306. The number of nitrogen atoms in the TNT substance is said to be 7.30 × 10^21 atoms.

The number of hydrogen atoms in the same TNT substance can be got using mole ratio. Based on the chemical formula, the mole ratio of hydrogen to nitrogen is 5:3 i.e. H5N3.

This means that;

Number of atoms of hydrogen = 5/3 of the number of atoms of nitrogen.

Hence, number of H atoms = 5/3 × 7.30 × 10^21

number of H atoms = (7.30 × 5/3) × 10^21

number of H atoms = (36.5/3) × 10^21

number of H atoms = 12.1666 × 10^21

number of H atoms = 1.2166 × 10^22 atoms.

Approximately, number of H atoms in TNT is 1.22 × 10^22 atoms.

Answer: Both of these are of great concern to human health. BPA is used in many things including plastic bottles and food packaging materials. Over time the polymer chains of BPA break down, and can enter the human body in many ways from drinking contaminated water to eating a fish that is exposed to the broken down toxins.

Explanation:

I think you will get it

Answer:

its c

Explanation:

Answer:

A. the same amount of work being done over a shorter period of time

Explanation:

I believe. Sorry if it is incorrect.

Answer:

A.wood

Explanation:

It is a poor conductor of heat

Answer: the erratic random movement of microscopic particles in a fluid, as a result of continuous bombardment from molecules of the surrounding medium. Brownian motion, or pedesis, is the random motion of particles suspended in a medium. This pattern of motion typically consists of random fluctuations in a particle's position inside a fluid sub-domain, followed by a relocation to another sub-domain. Brownian motion, also called Brownian movement, any of various physical phenomena in which some quantity is constantly undergoing small, random fluctuations. It was named for the Scottish botanist Robert Brown, the first to study such fluctuations (1827).

Hope this helps...... Stay safe and have a Merry Christmas!!!!!!!!! :D

Explanation:

Answer:

to and fro motion is called brownian motion

The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)

Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.

The reactants are located on the left side while the products are located on the right side.

Reactants —> Products

The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.

Ag₂O —> Ag + O₂

There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below

2Ag₂O —> Ag + O₂

There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below

2Ag₂O —> 4Ag + O₂

Now, the equation is balanced.

Thus, the coefficients are: 2, 4, 1

Learn more about chemical equation:

https://brainly.com/question/7181548

#SPJ2

Answer:

see explanation

Explanation:

If we look at the structures of each of the compounds we can be able to deduce the accurate hybridization of each of the atoms listed.

Looking at ClNO - we can see that the nitrogen atom is linked to oxygen by a double bond and linked to chlorine by a single bond retaining a lone pair on nitrogen. Hence the nitrogen is in sp2 hybridized state.

For ClOCl, the compound has a sp3 hybridized oxygen atom linked to two chlorine atoms as expected retaining two lone pairs on oxygen.

For NCOH, the carbon atom is doubly bonded to oxygen hence it is sp2 hybridized.

Answer:

A) Label 2 (Sp2)

B) Label 3 (Sp3)

C) Label 1 (Sp)

Explanation:

A) Have 7 Lone Pairs (LP) to place. 1 on N. 1 becomes a double bond. Double bonds count as 1 Electron Group. Same for single bond and LP. Add these to get 3. 3 coresponds for SP2

B) 8LP. 2LP on O. 2 bonds to O. Add to get 4. 4-> Sp3

C) 5LP. C O bond is double. single bond to N. Add to get 2-> Sp

Answer:

D

Explanation:

Answer: B

Explanation:

liquid to solid

Answer:

[Ar] 3d¹⁰ 4s² 4p³

Explanation:

so...... ur welcome

Answer:

Formation of precipitate

Formation of soluble salts

Explanation:

Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.

Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)

According to the solubility rules:

For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.

Answer:

It's b) Formation of a precipitate

Explanation:

I took the quiz and got it right.

Explanation:

The first wave was found to have a wavelength of 3 x 10⁵ m and the second wave had a wavelength of 3 x 10⁴ m

We need to find which wave have a higher frequency.

The relation between frequency and wavelength is given by :

[tex]c=f\lambda[/tex]

Let f₁ and f₂ be the frequency of wave 1 and wave 2.

[tex]f_1=\dfrac{c}{\lambda_1}\\\\f_1=\dfrac{3\times 10^8}{3\times 10^5}\\\\=1000\ Hz[/tex]

And

[tex]f_2=\dfrac{c}{\lambda_2}\\\\f_2=\dfrac{3\times 10^8}{3\times 10^4}\\\\=10000\ Hz[/tex]

Hence, the wave having less wavelength will have higher frequency. The wave having wavelength 3 x 10⁴ m will have higher frequency.

Answer: D. Potassium bromide

Answer:

There are 6 hydrogen atoms.

Explanation:

The formula for an alkyne that has only one triple bond is as follows:

Where n is any natural number greater than 2.

For this problem, n=4. This would mean the formula is:

Thus

Thus the answer is 6, there are 6 hydrogen atoms.

Answer:

[tex]\%m/m=10.6\%[/tex]

Explanation:

Hello!

In this case, since the by-mass percent is defined by:

[tex]\%m/m=\frac{m_{solute}}{m_{solution}} *100\%[/tex]

Thus, since the given 1.77 M solution is given in terms of mol/L, we need to compute the mass of acetone via its molar mass and the volume of solution in L to g via the density:

[tex]\%m/m=1.77\frac{mol}{L}*\frac{58.08g}{1mol}*\frac{1L}{1000mL}*\frac{1mL}{0.971g} *100\%\\\\\%m/m=10.6\%[/tex]

Best regards!

Answer:

CO2

Explanation:

Answer:

need points

Explanation:

Answer: The lowest possible whole number coefficient for water is 1.

Explanation:

A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble  water and remain in solid form are represented by (s) after their chemical formulas.

The balanced chemical reation for aqueous solutions of lithium hydroxide and acetic acid react to yield lithium acetate and water is:

[tex] LiOH(aq)+CH_3COOH(aq)\rightarrow CH_3COOLi(aq)+H_2O(l)[/tex]

Thus the lowest possible whole number coefficient for water is 1.

In the balanced equation for given reaction, the lowest possible whole number coefficient for water is one.

Stoichiometry of any reaction will tells about the relative amount of species presents before and after the chemical reaction.

Reaction between the lithium hydroxide and acetic acid is a neutralization reaction, as here lithium hydroxide is a base and acetic acid is a acid as a result of which it produces water molecule and lithium salt of acetate. And balanced equation for this will be represented as:

LiOH(aq) + CH₃COOH(aq)  CH₃COOLi(aq) + H₂O(l)

In the above equation all entities are present in equal amounts on both the sides and from the stoichiometry of the reaction it is clear that coefficient of water is 1.

Hence, 1 is the whole number coefficient for water.

To know more about stoichiometry, visit the below link:
https://brainly.com/question/16060199

Answer:

Lock her in the bathroom

Explanation:

Answer:

Ayoo

Explanation: