Why is methanol more soluble in water than butanol
Answer:
Explanation: The longer the alkyl chain, the less soluble in water is the alcohol. Methanol and ethanol are infinitely miscible in water; propanol and butanol have limited solubility. ... Hydrogen bonding with water thus becomes less viable, and solubility of the long-chain alcohol IN WATER decreases.
Explanation:
Write your explanation on how plants
nake their own food?
imnortont bynroduct of
Answer:
photosynthesis are ligt water and carbon dioxide
Explanation:
Plants make their own food out of inorganic compounds through a process called photosynthesis that takes place in the leaves. The ingredients necessary for photosynthesis are light, water and carbon dioxide.
A. Neutrons and electrons
B. Protons and electrons
C. Electrons in energy levels
D. Protons and neutrons
Answer:
D.
Explanation:
Because protons and neutrons make up the mass of an atom.
Given the following reaction, how many moles of iron(III)
oxide can be produced from 65.2 moles of iron?
4Fe + 302 → 2Fe2O3
How is the chemical bonding within a crystal of gold (Au) different from the
chemical bonding within a crystal of table salt (NaCl)?
Answer:
In the gold crystal, the atoms are bonded by freely moving electrons. In the salt crystal, the atoms are bonded by the attraction of opposite electrical charges.
Explanation:
A.pex
A crystal of Gold (Au) has metallic bonding whereas a crystal of NaCl has ionic bonding.
What is Chemical Bonding?Chemical bonding refers to the formation of a chemical bond between two or more atoms, molecules or ions to give rise to a chemical compound.
Ionic bonding occurs by transfer of electrons from one atom to another and is usually between a metal and a non metal atom. This type of bond is classically described as occurring when atoms interact with one another to either lose or gain electrons.
Metallic bonds are the chemical bonds that hold atoms together in metals.
Therefore, A crystal of Gold (Au) has metallic bonding whereas a crystal of NaCl has ionic bonding.
Learn more about Chemical Bonding, here:
https://brainly.com/question/15444131
#SPJ5
PLEASE HELP!! WILL MARK BRAINLIEST
Use the Internet to list five examples of elements with their properties and five examples of compounds with their properties.
Answer:
here you go
Explanation:
5 elements and properties:
Boron- The chemical properties of boron are more similar to carbon and silicon than elements of its own group, although boron is more electron deficient. Boron has a high affinity for oxygen-forming borates, and reacts with water at temperatures above 100 °C to form boric acid and other boron compounds.
Carbon- As a member of group 14 on the periodic table, it is nonmetallic and tetravalent—making four electrons available to form covalent chemical bonds. The most common isotope of carbon has 6 protons and 6 neutrons, and has an atomic mass of 12.0107 amu. Its ground state electron configuration is 1s22s22p2.
Nitrogen- Nitrogen gas (chemical symbol N) is generally inert, nonmetallic, colorless, odorless and tasteless. Its atomic number is 7, and it has an atomic weight of 14.0067. Nitrogen has a density of 1.251 grams/liter at 0 C and a specific gravity of 0.96737, making it slightly lighter than air.
Oxygen- is the air you breath
Nickel- Nickel is a hard silver white metal, which forms cubic crystals. It is malleable, ductile, and has superior strength and corrosion resistance. The metal is a fair conductor of heat and electricity and exhibits magnetic properties below 345°C
5 compounds and properties:
Water - Formula: H2O = Hydrogen2 + Oxygen. ...
Hydrogen Peroxide - Formula: H2O2 = Hydrogen2 + Oxygen2 ...
Salt - Formula: NaCl = Sodium + Chlorine. ...
Baking Soda - Formula: NaHCO3 = Sodium + Hydrogen + Carbon + Oxygen3
Octane - Formula: C8H18 = Carbon8 + Hydrogen18
hope this helps
What will be the mass of 9.95 liters of propane gas (C3H8) at STP?
Answer:
19.5g
Explanation:
Given parameters:
Volume of propane gas = 9.95L
Unknown:
Mass of propane gas = ?
Solution:
To solve this problem, find the number of moles first.
At STP;
22.4L of gas makes up 1 mole
9.95L of gas will have a [tex]\frac{9.95}{22.4}[/tex] = 0.44mole
So;
Mass of propane gas = number of moles x molar mass
Molar mass of propane = 3(12) + 8(1) = 44g/mol
Mass = 0.44 x 44 = 19.5g
Step 7: Determine the Limiting Reactant (Trial 2)
50
Analysis: The limiting reactant(s) appeared to be
because ...
Answer:
aluminum
no aluminum is left over
Explanation:
the next answers for step 7 are 0.019, 0.0093, aluminum
Answer:
Aluminum because no aluminum is left over
Explanation:
the electrolyte in automobile lead storage batteries is a 3.75 sulfuric acid solution that has density of 1.230g/mL. calculate the mole fraction.
The mole fraction of sulfuric acid : 0.073
Further explanationGiven
3.75 M sulfuric acid solution that has density of 1.230 g/mL
Required
The mole fraction
Solution
3.75 M = 3.75 mol/L
For 1 L solution :
mass of solution = 1230 g
mass Sulfuric acid : 3.75 mol x 98 g/mol=367.5 g
mass water = 1230-367.5 = 862.5 g
mol water = 862.5 : 18 g/mol= 47.92
mol total = 3.75 + 47.92 = 51.67
mole fraction of sulfuric acid :
= 3.75 : 51.67
= 0.073
Write the following in standard notation: 2.8 x 10-5s.
Answer:
2.8 X 10-5s in standard notation is 28-5s
Explanation:
Multiply 2.8 by 10
Imagine being barefoot outside on a hot summer's day in a sunny place ,would
you rather be standing on concrete or grass? Why?
Answer:
Grass
Explanation:
On a hot summers day, while barefoot Concrete normaly has heat absorbed into it. (Or on top) So when you go to Walk on it, It normally burns the heel.
Hope I helped and Have a great day!
brainliest?
Answer:
grass
Explanation:
the concrete has a higher specific heat capacity and is basically hotter than the grass which has a lower one
Marble chips react with dilute hydrochloric acid to produce carbon dioxide gas. The rate of this reaction can be changed by changing the size of marble chips.
Describe experiments to investigate what effect using smaller marble chips has on the rate of this reaction.
Answer:
See explanation
Explanation:
We know that surface area is an important determinant factor in the study of reaction rate. This is the reason why finely divided marble chips react faster than lumps of marble in the reaction between marble chips and dilute HCl.
Now imagine that i have a lump of marble and i have finely divided marble. Then i also have a solution of 0.5 M dilute HCl. If i introduce 1g of the lump of marble into 250 ml solution of the 0.5 M HCl in one beaker and introduce 1g of finely divided marble into another 250 ml solution of 0.5 M HCl in a separate beaker, we will notice that the finely divided marble chips reacts faster as evidenced by the quicker effervescence of CO2 gas from the later compared to the former.
Hence, smaller marble chips reacts faster with dilute HCl than a lump of marble.
Answer:
yes the above given answer is absolutely correct I agree with u man on the above.
What particles are contained in the nucleus of an atom?
O electrons & protons
O neutrons & electrons
O neutrons & protons
O pixels & electrons
Over the past week, Anna has been very curt with shondra, and when she ask if she has done something to offend her, Anna tersely replies, "no, everything is fine" what should shondra do
Answer:
A. avoid talking to Anna altogether and stay out of her way
B. ask her manager for advice
C. check with Gary to see if there is any gossip about what's going on with Anna
D. take a curt approach of her own to show Anna how it feels
Explanation:
ANSWER: B.
Can someone plz help? Thanks so much!
An atom that contains 6 protons 6 neutrons and 6 electrons has a mass of approximately
1) 12 u
2) 12 g
3) 18 u
4) 18 g
Answer:
12 grams
Explanation:
Electrons do not contribute to mass. The proper unit to use is G
What are the three main parts of an atom and what are their charges?
Where are the electrons found in an atom?
Answer:
Three main parts are Protons (pos charge) Neutrons (no charge) Electrons (negative charge) and the electron is found on the outside of the nucleus
Explanation:
what does group 16 (oxygen family) have in common
Answer: here is your answer
Explanation:
The oxygen family consists of the elements that make up group 16 on the periodic table: oxygen, sulfur, selenium, tellurium, and polonium. These elements all have six electrons in their outermost energy level, accounting for some common chemical properties among them.
Answer:
they all have 6 valence electrons
Explanation:
all elements in group 16 have 6 valence electrons
10
If velocity is positive, which would most likely yield a negative acceleration?
O O OO
A final velocity that is faster than an initial velocity.
A time that is less than a half hour.
An initial velocity that is faster than a final velocity.
A time that is greater than a half hour.
Answer:
An initial velocity that is faster than a final velocity
Explanation:
The relationship between velocity and acceleration is given as follow;
Acceleration = Change in velocity / Time
Change in Velocity = Final Velocity - Initial Velocity
From the formular, time is not able to affect the sign of the acceleration.
A negative acceleration is also referred to as deceleration and this occurs when there is a drop in velocity.
A drop in velocity occurs when the initial velocity is faster than the final velocity.
How is agriculture depended on industries
Answer:
The interdependence of agriculture and industry helps the development of both the sectors. The most important aspect of this inter dependence is that the products of one serve as important inputs for the other. Growth of one sector, thus means ample supply of inputs for the other.
Explanation:
1. Which of these is NOT found in the nucleus of an atom?
neutrons
protons
electrons
the mass of the atom
Answer:
Electrons
Explanation:
Answer:
Electrons are not found in the nucleus for they are orbiting the atom.
Why do we sometimes use roman numerals in naming ionic compounds?
We use roman numerals to indicate the oxidation state of metal atoms when naming compounds especially in the case of coordination compounds. It is a standard system of nomenclature.
What is oxidation state?Oxidation state of a species is the number electrons gained or lost. Oxidation state increases if electrons are lost from the atom and it will be decreased if electrons are gained.
For example, copper is in + 2 oxidation state in CuSO₄, thus it can be indicated as Cu(II). Copper can exists is +3 oxidation too. Thus the representation will be Cu (III).
All the transition metals like copper exhibit various oxidation state. So it is important to indicate in which oxidation state they are in a particular compound. In the compound Fe₂O₃, iron is in + oxidation state whereas in FeSO₄, it can be +2 . Thus it is important to note whether it is Fe (II) or Fe (III).
To find more about oxidation states, refer the link below:
https://brainly.com/question/11313964
#SPJ2
_____ is the element from which iron is taken.
Carbon
Quartz
Hematite
Which formula is an empirical formula?
A.CH4
B.C2H6
C.C3H6
D.C4H10
Answer:
CH4
Explanation:
What do the letters ESM stand for?
Answer:
European stability mechanism
How many gallons of water would be in a container that is 256 millimeters X 20 inches X.045 meter.
If I have one mole of sulfur, how many grams would it weigh?
Answer:
32.06 grams
Explanation:
One mole of sulfur is equal to 32.06 grams of sulfur.
Answer:ok
Explanatio
heres the answer 32.065 grams because 1 mole is equal to 1 moles Sulfur
What is one bad thing that can happen when humans build more and more streets and buildings?
Answer:
there will be less and less space
Explanation:
pls help
20020200202
tell me what to do dudette
Question 3
True or False. You must convert grams to moles to do stoichiometry.
True
оо
D
False
Answer:
True
Explanation:
Sometimes you will need to convert from grams to moles, or moles to grams
PLEASE HELP!! ILL MARK BRAINLIST!!
