3. Move the slider on the burette to the top to add about 25 mL of NaOH to the flask. What
happens, and what does this tell you about the pH of the flask?
Page Break
LED
Answer:
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue.
Explanation:
After reading your question, we can see that you are carrying out a test to discover the nature of the pH of a solution. This type of test uses litmus paper, which is an indicator of the presence of acids and bases, being able to determine the pH of a solution. This paper is soaked in organic ink and when placed in an acidic solution, it is red in color. However, when placed in a basic solution it has a blue color.
An acidic solution is one that has a high concentration of H+ atoms and has the ability to donate electrons. The basic solution, on the other hand, has a high concentration of OH- and has the capacity to receive electrons.
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue, that is, the solution has the basic pH.
Please help me find the answer , thank you.
Answer:
the answeer is definitely silicon.
what type of wave moves the particles parallel to the motion of the wave
a.electromagnetic
b. longitudinal
c. transverse
d.water
Answer:
c
Explanation:
pls show ur work will mark the brainliest
Answer:
M = 0.47
Explanation:
1 - Turn grams to moles using molar mass:
16g NaOH × 1 mol NaOH / 40g NaOH = 0.4 mol NaOH
2- Turn milliliters to liters:
855mL × 1 L / 1000mL = 0.86 L
3- Use formula which is M = moles of solute / liters of solvent:
M = 0.4 mol NaOH / 0.86 L = 0.47
please help me :)
( check the photo! )
Answer:
plastic rays i think the matetial that can widely recycle
A sample of a gas in a balloon has a volume of 4.20 L and temperature of 48.2 °C. Calculate the volume when
the temperature is lowered to 15.4°C at constant pressure.
a. 3.77
b. 4.20
c. 1.34
d. 13.15
e. 4.68
Answer:
V1/T1=V2/T2
4.20L/321.2K=x/288.4K
multiply both side by 288.4
1211.28/321.2=x
x=3.77L
Option 3 13.15 is the correct answer.
What is Charles law?Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.
According to Charles law
The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
[tex]V1/T1=V2/T2[/tex]
Where,
[tex]V1[/tex]= first volume
[tex]V{2}[/tex] = second volume
[tex]T{1}[/tex] = first temperature
[tex]T{2}[/tex]= second temperature
Here, at constant pressure,
[tex]V1/T1=V2/T2[/tex]
[tex]V1[/tex]=4.20 L
[tex]V2[/tex]= x
[tex]T1[/tex]=321.2 K
[tex]T2[/tex]=288.4 K
Therefore, [tex]V1/T1=V2/T2[/tex]
4.20L/321.2K=x/288.4K
1211.28/321.2=x
x=3.77L
Thus option a is correct.
To learn more about Charles law refer to:
https://brainly.com/question/16927784
#SPJ2
Select the correct answer.
Which statement best describes how chemical equations demonstrate conservation of mass?
A.
The number of reactants is the same as the number of products.
B.
The compounds are the same on each side of the reaction.
C.
The number of atoms of each element is the same on each side of the equation.
D.
The state of matter is the same on each side of the equation.
"C" is correct.
The Law of Conservation of Mass states that matter can be neither created nor destroyed. This is evident in chemical equations as you will always start and end with the same amount of atoms of every element. They are all still there; they have just been rearranged.
Answer: C) The number of atoms of each element is the same on each side of the equation.
Explanation: Mass cannot be created nor destroyed.
An unknown amount of sodium azide (NaN3) reacts and produces 0.033 moles of nitrogen gas. What mass of sodium metal is produced
Answer:
Mass of sodium metal is 130.87 gram
Explanation:
The complete reaction is
2 NaN3 --> 2 Na + 3 N2
We know that PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
On substituting the given values, we get
[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2
Sodium azide's molar mass
3.02 *(2/3) = 2.013 moles
Mass = 2.03 * 65.01 = 130.87 gram
fill in the blank if its true or false
T=True
F=False
_________ 1. Stars do not change over their life cycles.
_________ 2. A protostar is the latest stage of a star’s life.
_________ 3. The larger the mass, the shorter the life cycle.
_________ 4. The hottest stars are blue and the coolest stars are red.
_________ 5. The white dwarf eventually runs out of fuel and dies as a red dwarf.
_________ 6. Our Sun is in the main sequence at the moment.
Answer: 1. F
2. F
3. T
4. F
5. T
6. T
Explanation:
I am not sure i'm sorry if it isn't right
Which of the following has the greatest influence on the size and force of waves?
A.
seasons
B.
Moon’s gravity
C.
wind speed
D.
Earth’s gravity
Fluorine, chlorine, and bromine react with gold.
which 1 of the 3 elements will be the most reactive with gold
thanks
Answer:
gold i believe or possibly bromine
Explanation:
q- how does fluorine react with gold
a- this fluoride compound features gold in its highest known oxidation state. this red solid dissolves in hydrogen fluoride, but these solutions decompose, liberating fluorine.
q- how does chlorine react with gold
a- gold does react with halogens. it'll, for example, react very slowly with chlorine gas at room temperature to form gold chloride, AuCl3. if gold chloride is heated gently, it will decompose to release the pure elements again.
q- how does bromine react with gold
a- gold in bromine solutions dissolves according to electrochemical/chemical (EC) mechanisms. ... in the chemical composition of the mechanism, this monovalent gold bromide disproportionate into gold and stable AuBr −4 , which reports into solution. with respect to pH, there are two characteristic dissolution regions.
** sorry that i can't provide a sure answer**
good luck :)
i hope this helps
have a nice day!
Fluorine will be most reactive with gold.
What is fluorine?
Of almost all of the elements, fluorine seems to be the most electronegative as well as reactive. Fluorine would be a diatomic, pale yellow, extremely corrosive, combustible gas with a strong smell. The lightest halogen would that be. It produces oxygen and even the incredibly corrosive hydrofluoric acid when it combines strongly with water.
What is reactive?Reactivity would be a substance's capacity to chemically combine with several other substances. Iron, for instance, reacts vigorously with oxygen.
As you move down the group, the halogens, which are non-metal elements in Group 7, become less reactive. In contrast to the alkali metals within Group 1 of the particular periodic table, this trend is the opposite. One of the most reactive elements in Group 7 was fluorine.
To know more about fluorine.
https://brainly.com/question/1940697
#SPJ3
The specific heat of nickel is 0.445 J/g degree Celsius. How much heat is required to heat a 168 gram piece of nickel from 15.2 degrees Celsius to 43.6 degrees Celsius?
The volume of a gas is 550 mL at 960 mm Hg and 200.0 C. What volume
would the pressure of the gas be 830 mm Hg if the temperature is reduced
to 150.0C? Make sure your answer is rounded to nearest whole number
and your final answer has the units of mL. *
Answer:
The volume will be 568.89 mL.
Explanation:
Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
or P * V = k
Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. That is, the pressure of the gas is directly proportional to its temperature. Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
Where P = pressure, T = temperature, K = Constant
Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:
[tex]\frac{P*V}{T} =k[/tex]
Studying an initial state 1 and a final state 2, it is fulfilled:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
In this case:
P1= 960 mmHgV1= 550 mLT1= 200 C= 473 K (being 0 C=273 K)P2= 830 mmHgV2= ?T2= 150 C= 423 KReplacing:
[tex]\frac{960 mmHg*550 mL}{473K} =\frac{830 mmHg*V2}{423 K}[/tex]
Solving:
[tex]V2=\frac{423 K}{830 mmHg} *\frac{960 mmHg*550 mL}{473K}[/tex]
V2= 568.9 mL
The volume will be 568.89 mL.
The weight of the elephant is 4500 kg, and the area of the sole of one of its legs is 1700 cm2. Calculate the pressure of the elephant on the ground.
Answer:
64852.94 N/m²
Explanation:
From the question,
P = F/A.................... Equation 1
Where P = Pressure of the Elephant on the ground, F = Weight of the Elephant, A = Area of the sole of the four legs.
But,
F = mg.............. Equation 2
Where m = mass of the elephant, g = acceleration due to gravity
Substitute equation 2 into equation 1
P = mg/A............ Equation 3
Given: m = 4500 kg, A = (1700×4) cm² ( The elephant has four legs) = 6800 cm² = 0.68 m²
Constant; g = 9.8 m/s²
Substitute these values into equation 3
P = (4500×9.8)/0.68
P = 64852.94 N/m²
What gas in the air is used by plants to make their own food? (2 points)
Nitrogen
Water vapor
Carbon dioxide
Oxygen
Answer:
Carbon Dioxide
Explanation:
Carbon dioxide gets turned into oxygen
Weathering (breaking off sediments upriver), erosion (moving the sediments down river) and finally deposition caused the changes in the river.
What helps hold sediments in place to prevent erosion?
Answer:
Explanation:
Maintaining a healthy, perennial plant cover.
Mulching.
Planting a cover crop – such as winter rye in vegetable gardens. ...
Placing crushed stone, wood chips, and other similar materials in heavily used areas where vegetation is hard to establish and maintain.???
Exothermic reactions have _____ net bond energy.
A) positive
B) negative
C) neutral
A covalent bond is formed when two atoms reach a stable state that balances:
MARK TWO RESPONSES
A
the repulsion between the nucleus protons of one atom to the electrons of the other atom
B
the attraction between the nucleus of one atom to the electrons of the other atom
C
the attraction between the two nuclei of the atoms, which both contain protons
D
the repulsion between the two nuclei of the atoms, which both contain protons
Answer:
B and I think A but you may want a secon opinion on that
Explanation:
I know that electrons are shared with covalent bonds so I assume the 2 answers are the ones with electrons it them
What is the heat capacity of a substance in which 1050 grams will rise in temperature from 30.4°C to 25.7°C when it absorbs 2880 joules of heat?
Answer:
0.584 J/g°C
Explanation:
Using the formula as follows;
Q = m × c × ∆T
Where;
Q = amount of heat (joules)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
According to the information in this question;
mass of substance (m) = 1050g
Initial temperature = 25.7°C
Final temperature = 30.4°C
amount of heat (Q) = 2880J
change in temperature (∆T) = (30.4°C - 25.7°C) = 4.7°C
Using Q = m.c.∆T
c = Q ÷ m∆T
c = 2880 ÷ (1050 × 4.7)
c = 2880 ÷ 4935
c = 0.584 J/g°C
The specific capacity of the substance is 0.584 J/g°C.
please help me with this chem question!!
Answer:
caca123
Explanation:
UM
A cough sytup contains 0.5M dextromethophan. How many moles of the cough supressant are in 21.3mL of the cough syrup?
Answer:
0.0107 mol
Explanation:
Multiply concentration by volume (in liters) to get moles.
0.5 M • 0.0213 L = 0.0107 mol
what ive learned about heat,sound and light
Answer:
they are all in parts of our life and we need them each for surviving.
Explanation:
How many moles of C6H12O6 does 8.2 x 1023 molecules represent
Answer:
i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.
When do recessive traits show in an offspring?
Answer:
Only individuals with an aa genotype will express a recessive trait; therefore, offspring must receive one recessive allele from each parent to exhibit a recessive trait. One example of a recessive inherited trait is a smooth chin, as opposed to a dominant cleft chin.
Explanation:
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. Circle True or False.
The answer is true, yw.
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. This statement is true.
What are conifers ?Conifers are a type of gymnosperm plants bearing cone like structures in which the seeds are located. Don't be fooled by the fact that coniferous woods are widespread around the world. Some of the wildest trees in the world can be found there.
Hyperion, a coastal redwood tree, is the tallest tree in the world, reaching a height of 379 feet, equivalent to a 35-story structure. From Siberia to Canada, coniferous rainforest biomes can be found. They have cold winters and warm to hot summers.
Temperatures in coniferous forests are quite low all year long. Summertime temperatures range from -7°C to 21°C, while the average wintertime temperature ranges from -54°C to -1°C. Hence, the statement is true.
Find more on conifers:
https://brainly.com/question/30415885
#SPJ6
An unknown amount of Al203 decomposed producing 215 g of solid aluminum. 2Al2O3=4Al+3O2 How many grams of oxygen gas should be produced
Answer:
191.11 grams of oxygen gas should be produced.
Explanation:
The balanced reaction is:
2 Al₂O₃ → 4 Al + 3 O₂
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Al₂O₃: 2 molesAl: 4 molesO₂: 3 molesBeing the molar mass of each compound:
Al₂O₃: 102 g/moleAl: 27 g/moleO₂: 32 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Al₂O₃: 2 moles* 102 g/mole= 204 gramsAl: 4 moles* 27 g/mole= 108 gramsO₂: 3 moles* 32 g/mole= 96 gramsThen you can apply the following rule of three: if by stoichiometry 108 grams of aluminum are produced along with 96 grams of oxygen, 215 grams of aluminum are produced along with how much mass of oxygen?
[tex]mass of oxygen=\frac{215 grams of aluminum*96 grams of oxygen}{108grams of aluminum}[/tex]
mass of oxygen= 191.11 grams
191.11 grams of oxygen gas should be produced.
An eraser is an example of —
Group of answer choices
an insulator
a closed circuit
a conductor
an open circuit
Answer:
Insulator
Explanation:
An eraser can't conduct electricity, which makes it an insulator.
What determines crystal size in minerals formed by lava or magma?
Answer:
When magma cools, crystals form because the solution is super-saturated with respect to some minerals. If the magma cools quickly, the crystals do not have much time to form, so they are very small. If the magma cools slowly, then the crystals have enough time to grow and become large.
Explanation:
PLZ HELP!
Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.
Answer:
QUESTION:
Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.
ANSWER:
I've seen the following in my life:
~ Lightwaves
~ Heatwaves
~ Electromagnetic waves
~ X-rays
~ Tsunami Waves
Explanation:
Hope that this helps you out! :)
If you have any questions please put them in the comment section below this answer.
Have a great rest of your day/night!
Please thank me on my profile if this answer has helped you.
Construct an explanation for why the physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field.
Answer:
The hot temperature of inner core and outer core is responsible for the production of magnetic field.
Explanation:
The physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field because the very high temperature of inner core is responsible for the formation of magnetic field. If the inner core is not very hot so the magnetic field will not be generated and our earth's atmosphere will not be save from the solar wind. It can be blown away by the solar wind if this magnetic field is not present so we can conclude that the physical properties of inner core and outer core is important for the production of magnetic field.