Answer:
the answer is 4 hope this helps
Studying and got stuck if someone can help me.
Answer:
Ph level 0-7 is a acid
ph level 7-14 is base
bases turn paper blue
acids dissolve metal
acids contain hydrogen ions
Explanation:
I dont know the last one all I know that they become neutral when acids and bases are mixed.
Write the equation showing the formation of a monosubstituted product when butane reacts with chlorine. Use molecular formulas for the organic compounds (C before H, halogen last) and the smallest possible integer coefficients.
Answer:
CH3CH2CH2CH3 + Cl2 --------> CH3CH2CH2CH2Cl + HCl
Explanation:
Alkanes react with halogens in the presence of light to yield alkyl halides. The degree of substitution increases as the reaction progresses. The reaction occurs by free radical mechanism.
The reaction between butane and chlorine molecule to yields a monosubstitution product occurs as follows;
CH3CH2CH2CH3 + Cl2 --------> CH3CH2CH2CH2Cl + HCl
Naturally occurring gallium is a mixture of isotopes
that contains 90.11% of Ga-69 (atomic mass = 68.93
u) and 9.89% of Ga-71 (atomic mass 70.92 u).
What is the average atomic mass of naturally
occurring gallium?
A) 69.93 amu
C) 69.50 amu
B) 69.12 amu
D) 69.00 amu
Phenols do not exhibit the same pka values as other alcohols; they are generally more acidic. Using the knowledge that hydrogen acidity is directly related to the stability of the anion formed, explain why phenol is more acidic than cyclohexane
Answer:
Phenols do not exhibit the same pka values as other alcohols;
They are generally more acidic.
Using the knowledge that hydrogen acidity is directly related to the stability of the anion formed, explain why phenol is more acidic than cyclohexane.
Explanation:
According to Bromsted=Lowry acid-base theory,
an acid is a substance that can release [tex]H^{+}[/tex] ions when dissolved in water.
So, acid is a proton donor.
If the conjugate base of an acid is more stable then, that acid is a strong acid.
In the case of phenol,
the phenoxide ion formed is stabilized by resonance.
[tex]C_6H_5OH -> C_6H_5O^- +H^+[/tex]
The resonance in phenoxide ion is shown below:
Whereas in the case of cyclohexanol resonance is not possible.
So, cyclohexanol is a weak acid compared to phenol.
Help guys please question 3 in picture ASAP pls
Answer:
1 Spinal fluid
2 Milk
3 Saliva
4 Urine
5 Gastric content
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary for us to calculate the pH of both gastric content and spinal fluid by using the following equations and works:
[tex]pH_{gastric}=-log(10^{-2})=2.0\\\\pH_{spinal}=14+log(10^{-6.6})=7.4[/tex]
Thus, we rank them as follows:
1 Spinal fluid
2 Milk
3 Saliva
4 Urine
5 Gastric content
Regards!
how to solve the chemical formula for Calcium Chlorate
Answer:
Ca(ClO3)2
Explanation:
The chemical formula of calcium chlorate is Ca(ClO3)2, which means in this molecule, Ca2+ ion is bonded to two ClO3- ions. So the formula can be expended to O3Cl-Ca-ClO3, or CaCl2O6 (basically times the numbers of the elements inside the bracket by the number outside the bracket.
Write a balanced nuclear equation for the following: The nuclide astatine-218 undergoes alpha emission to give bismuth-214
____________ → _______ + __________
Answer:
[tex]^{218}_{85}At\rightarrow ^{214}_{83}Bi+^{4}_{2}He[/tex]
Explanation:
Hello there!
In this case, since the radioactive reaction for the alpha emission of astatine-218 to bismith-214 involve the release of a helium atom as shown below:
[tex]^{218}_{85}At\rightarrow ^{214}_{83}Bi+^{4}_{2}He[/tex]
Whereas the atomic number decreases by 2 and the mass number by 4 in agreement to the release of the Helium atom.
Regards!
Which equation represents a neutralization reaction? 1. Ca(OH) 2 Ca^ 2+ +2OH^ - 2. CaCl 2 Ca^ 2+ +2Cl^ - 3 H^ + +OH^ - HOH 4. H^ + +F^ - HF
Balance the following equation and list the coefficients in order from left to right.
SF4 + __ H2O → _H2SO3 + HE
Vascular tissue
From Wikipedia, the free encyclopedia
Jump to navigationJump to search
Cross section of celery stalk, showing vascular bundles, which include both phloem and xylem.
Detail of the vasculature of a bramble leaf.
Translocation in vascular plants
This article is about vascular tissue in plants. For transportation in animals, see Circulatory system.
Vascular tissue is a complex conducting tissue, formed of more than one cell type, found in vascular plants. The primary components of vascular tissue are the xylem and phloem. These two tissues transport fluid and nutrients internally. There are also two meristems associated with vascular tissue: the vascular cambium and the cork cambium. All the vascular tissues within a particular plant together constitute the vascular tissue system of that plant.
The cells in vascular tissue are typically long and slender. Since the xylem and phloem function in the conduction of water, minerals, and nutrients throughout the plant, it is not surprising that their form should be similar to pipes. The individual cells of phloem are connected end-to-end, just as the sections of a pipe might be. As the plant grows, new vascular tissue differentiates in the growing tips of the plant. The new tissue is aligned with existing vascular tissue, maintaining its connection throughout the plant. The vascular tissue in plants is arranged in long, discrete strands called vascular bundles. These bundles include both xylem and phloem, as well as supporting and protective cells. In stems and roots, the xylem typically lies closer to the interior of the stem with phloem towards the exterior of the stem. In the stems of some Asterales dicots, there may be phloem located inwardly from the xylem as well.
Between the xylem and phloem is a meristem called the vascular cambium. This tissue divides off cells that will become additional xylem and phloem. This growth increases the girth of the plant, rather than it
Sort the following molecules or ions into their proper three-dimensional molecular shapes. Drag the appropriate molecules or ions to their respective bins.
1. NBr3
2. SO2
3. SBr42+
4. SO42+
5. CF3Cl
A. Tetrahedral
B. Trigonal pyramidal
C. Bent
D. Linear
E. Trigonal planar
Answer:
NBr3 - Trigonal pyramidal
SO2- Bent
SBr42+- Tetrahedral
SO42- Tetrahedral
CF3Cl - Tetrahedral
Explanation:
The shape of a molecule depends on the number of electron pairs on the valence shell of the central atom in the molecule. This is well captured in the valence shell electron poair repulsion theory.
The number of electron pairs on the outermost shell of the central atom in a molecule are called regions of electron density. According to this theory, these regions of electron density must be positioned as far apart from each other as possible to minimize repulsions between electron pairs.
This theory is the basis of the shapes of molecules shown in the answer. If a molecule has four regions of electron density, it could be trigonal pyramidal or tetrahedral in shape such as NBr3 and CF3Cl.
Note that, when deciding on the three dimensional geometry of a molecule, only the covalent bonds present are considered.
The diagram shows an experiment. damp litmus paper gas given off mixture of ammonium chloride and sodium hydroxide 1 heat What is the name of the gas and the final colour of the litmus paper? gas colour A ammonia blue B ammonia red с chlorine white D chlorine red plz guys help me
Answer:
The correct answer is - A. ammonia blue.
Explanation:
It is given that there is a mixture of ammonium chloride and sodium hydroxide and if we heat the Mixture of NH4Cl and NaOH then, the following reaction will take place-
NH4Cl (aq)+ NaOH (aq)==> NaCl (aq) + NH3 (g)+ H2O (l)
In this reaction, there is a release of NH3 gas which is absorbed on litmus paper. We know that NH3 gas is basic in nature and so it will turn litmus paper blue.
Thus, the correct answer would be - NH3 (ammonia ) and Blue
which of the following experiments raises ethical concerns
Answer:
Research that releases a poisonous gas into the air.
Explanation:
Since I don't know the options I will guess it is ^
Before the lab student needs to make necessary chemical reagent solutions, the teacher asked them to make 50.0mL of 1.0 M H2SO4 from a 6.0 M sock
V1=
M1=
V2=
M2=
Answer:
V1 = 8.3 mL
Explanation:
Step 1: Given data
Initial volume (V1): ?
Initial concentration (M1): 6.0 M
Final volume (V2): 50.0 mL
Final concentration (M2): 1.0 M
Step 2: Calculate the volume of the initial solution
We want to prepare a dilute solution from a concentrated one. We can calculate the volume of the initial solution using the dilution rule.
M1 × V1 = M2 × V2
V1 = M2 × V2 / M1
V1 = 1.0 M × 50.0 mL / 6.0 M = 8.3 mL
We will take 8.3 mL of the 6.0 M solution and add water until we have 50.0 mL.
4 AlF3 + 3 O2 ----------> 2Al2O3 + 6 F2
How many moles of AlF3 is needed to produce 8.25 moles of F2 from the given balanced equation shown above? (SHOW WORK)
Explanation:
6 F2------->4 AlF3
F2-----------> 4/6 AlF3
8.25 F2 ---------> 4×8.25/6 AlF3
so 5.5 moles
An eccentric chemistry professor (not mentioning any names) stops in every day and orders 200ml of Sumatran coffee at precisely 75.0°C. You then need to add enough milk at 5.00°C to drop the temperature of the coffee, initially at 95.0°C, to the ordered temperature.
Answer:
68.97g of milk must be added
Explanation:
To solve this problem we need to use the equation:
Q = C*m*ΔT -Coffee cup calorimeter equation-
This equation relates mass and change in temperature with heat of solution, Q.
The energy that decreases in the milk is the same that increases in the milk. That is:
Q(milk) = Q(tea)
Using the equation:
4.184J/molK* Mass milk * (65.0°C - 7.00°C) = 4.184J /molK * 200g (Tea) * (85.0°C - 65.0°C)
Mass milk * 58.0°C = 200g * 20.0°C
Mass milk = 4000g°C / 58.0°C
Mass milk =
68.97g of milk must be added
what is an example of reactivity?
If atoms of helium, neon, argon and krypton gas are moving at the same speed, which atom would have the highest kinetic energy
Helium atom would have the highest kinetic energy.
What is Kinetic Energy ?
Kinetic energy is a form of energy that a gas has by reason of its motion.
If work, which transfers energy, is done on a gas by applying a net force, the gas speeds up and thereby gains kinetic energy
Different gas particles move at different speeds with there definite kinetic energy—gases with smaller particles tend to be moving faster at the same temperature, which means they have a higher speed.
Helium is the smallest particles and thus, it will be the gas with the highest speed.
Learn more about Kinetic energy here ;
https://brainly.com/question/12669551
#SPJ2
A bulb is filled with Hą gas at a temperature T. The pressure is 756 mmHg. A portion of the gas is transferred to a flask and at 100 kPa, occupies 40.0 mL at the same temperature T. The pressure in the original bulb drops to 625 mmHg at temp. T. What is the volume of the bulb? (NOTE: 100 kPA = 750.0 mmHg)
Answer:
The volume of the bulb is 229.0mL
Explanation:
To solve this question we need to use Boyle's law that states that the pressure is inversely proportional to the volume of a gas under constant temperature. in the problem:
P1V1 = P2V2 + P3V1
Where P is pressure and V volume of:
1, initial state of the gas. 2, state of the transferred flask, 3, final state of the gas in the initial bulb
Replacing:
756mmHg*V1 = 750.0mmHg*40mL + 625mmHg*V1
131mmHg*V1 = 30000mmHg*mL
V1 = 229.0mL
The volume of the bulb is 229.0mL
which process produces co2?
burning of fossil fuels is the answer
Answer:
burning of fossil fuel
Explanation:
Why does glucose and acentic acid have the same empirical formula
Answer:
Examples. Glucose (C6H12O6), ribose (C5H10O5), Acetic acid (C2H4O2), and formaldehyde (CH2O) all have different molecular formulas but the same empirical formula: CH2O.
Explanation:In chemistry, the empirical formula of a chemical compound is the simplest positive integer ratio of atoms present in a compound.
True or False: Photosynthesis can take place under water.
True
False
Answer:
True
Explanation:
hope this helps mate
Given a mass of 70 g and a volume of 25 mL, what is the density?
Answer:
The density should be 2.8 g/mL.
Explanation:
To solve this problem, we must remember that we find density using the following formula:
Density = mass/volume
Therefore, if we plug in the values we are given in the problem, we get:
Density = 70 g / 25 mL
Density = 2.8 g/mL
Therefore, the correct answer is 2.8 g/mL.
Hope this helps!
You wash dishes for a chemistry laboratory to make extra money for laundry. You earn 12, and each shift lasts 75. Your laundry requires 12 quarters/load.
A. How many shifts must you work if you wish to wash 10 loads of laundry?
B. How many loads of laundry can you wash if you work 3 shifts?
C. How many loads of laundry will each shift pay for if the cost per load rises to 16 quarters?
Answer:
A. 2 shifts
B. 15 loads of laundry
C. 3.75 loads of laundry
Note: The question is missing some details. A similar complete question is given below:
You wash dishes for a chemistry laboratory to make extra money for laundry. You earn 12 dollars/hour, and each shifts lasts 75 minutes. Your laundry requires 12 quarters/load. How many loads of laundry can you wash if you work 3 shifts? How many loads of laundry will each shift pay for if the cost per load rises to 16 quarters?
Explanation:
The following information is provided :
Amount earned per hour = 12 dollars/hour
Duration for one shift = 75 minutes = 1.25 hours
Cost per load = 12 quarters/load
A. Cost of 10 loads of laundry = 12 × 10 = 120 quarters
120 quarters = 120/4 dollars = 30 dollars
Time taken to earn 30 dollars = 30/12 × 1 hour = 2.5 hours
Number of shifts required in 2.5 hours = 2.5/1.25 = 2 shifts
Therefore, 2 shifts are required to wash 10 loads of laundry
B. Duration of 3 shifts = 1.25 hours × 3 shifts = 3.75 hours
Amount earned in 3 shifts = 3.75 × 12 = 45 dollars
12 quarters/load = 12 × 0.25 dollars = 3 dollars/load
Number of loads that can be washed = 45/3 = 15 loads of laundry
Therefore, 15 loads of laundry can be washed in 3 shifts
C. 16 quarters/load = 16 × 0.25 = 4 dollars/ load
Amount earned per shift = 1.25 × 12 =15 dollars
Loads of laundry per shift = 15/4 = 3.75 loads
Therefore, 3.75 loads will be paid per shift
A concentration cell is constructed by using the same half-reaction for both the cathode and anode. What is the value of standard cell potential, for a concentration cell that combines a silver anode in contact with 0.10 M silver nitrate and a silver cathode in contact with 0.00003 M silver nitrate
Solution :
A cell that is concentrated is constructed by the same half reaction for the anode as well as he cathode.
We know,
In a standard cell,
the reduction half cell reaction is :
[tex]$Ag^+(aq)+e^- \rightarrow Ag(s) E^0 = -0.80 \ V$[/tex]
The oxidation half ell reaction :
[tex]$Ag(s) \rightarrow Ag^+(aq) + e^- \ E^0= +0.80 \ V$[/tex]
Thus the complete reaction of the cell is :
[tex]$Ag^+(aq)+ Ag(s) \rightarrow Ag^+(aq)+Ag(s)$[/tex]
[tex]$E^0 $[/tex] cell = [tex]$E_R - E_L = 0.00 \ \text{volts}$[/tex]
NaCl and HCl both have chlorine but are different types of bonds.
What kind of bonds are each of these?
What evidence did you use to determine what types of bonds they are?
Answer:
In HCl ,bond between hydrogen and chlorine is covalent. But due to difference in electronegativity of hydrogen and chlorine,shared electron pair gets attracted towards chlorine. Due to this polar covalent
19. A girl is ice skating and has 35 kgm/s of momentum. After she bumps into a
friend, she has 25 kgm/s of momentum. How much did she give her friend?
Answer:
15 kgm/s of momentum
Explanation:
Which statements explain the relationship between photosynthesis and cellular respiration? Select two options.
The glucose that plants use for energy is made by animals in cellular respiration.
Glucose is a reactant in both photosynthesis and cellular respiration
The oxygen released by photosynthesis is breathed in by animals to break down glucose.
Carbon dioxide is a product of both photosynthesis and cellular respiration
The carbon dioxide released by animals is used to build glucose in photosynthesis.
Answer:
the 2nd and 5th
Explanation:
they are both correct
Answer:
b and d | Glucose is a reactant in both photosynthesis and cellular respiration. | Carbon dioxide is a product of both photosynthesis and cellular respiration.
Explanation:
hope this helps.
An ion has 38 protons, 36 electrons, and 40 neutrons, what us the elements symbol
The symbol of the element in which it's ion has 38 protons, 36 electrons, and 40 neutrons is ⁷⁸₃₈Sr
How do I determine the symbol of the element?To obtain the symbol of the element, we shall obtain the mass number of the element. This is shown below:
Proton = 38Neutron = 40Mass number = ?Mass number = Proton + Neutron
Mass number = 38 + 40
Mass number = 78
Finally, we shall determine the symbol of the element. Details below:
Proton = 38Atomic number (z) = Proton = 38Mass number (A) = 78Symol of element =?From the periodic table, the element with atomic number of 38 is Strontium.
Thus, the symbol of the element will be ⁷⁸₃₈Sr
Learn more about symbol:
https://brainly.com/question/864236
#SPJ1
Which of the following is formed last in daughter cells when plant cells divide?
The nucleus
The nuclear envelope
The cell membrane
The cell wall
Answer:
The Cell Wall
Explanation:
The density of water is about 1.0 g/mL at room temperature. Briefly explain how the density of an aqueous solution at room temperature can be significantly less than 1.0 g/mL. Give an example of such a solution.
Answer:
The density of water is about 1.0 g/mL at room temperature.
Briefly explain how the density of an aqueous solution at room temperature can be significantly less than 1.0 g/mL.
Give an example of such a solution.
Explanation:
That means 1.0mL of water weighs ---- 1.0g
If any other aqueous solution which has mass less than 1.0g will have density less than 1.0g.
For example aqueous solution of sulfuric acid has density 0.98g/mL.
That means 1mL of sulfuric acid has mass 0.98g.
Dissolving gases or liquids in water whose density are less than that of water will result in an aqueous solution whose density is less than that of water, for example, sulfuric acid which has a density 0.98g/mL.
What is density of a substance?The density of a substance is the ratio of the mass to the volume of that substance.
Density measures compactness.
More compact substances are more dense.
The density of water is about 1.0 g/mL at room temperature.
This means that 1.0mL of water weighs 1.0g
1.0 mL of an aqueous solution whose mass is less than 1.0g will have density less than that of water.
Dissolving gases or liquids in water whose density are less than that of water will result in an aqueous solution whose density is less than that of water.
An example of an aqueous solution whose density is less than that of water is sulfuric acid which has a density 0.98g/mL.
Sulfuric acid is prepared by dissolving sulphur (vi) oxide, a gas, in water.
This means 1mL of sulfuric acid has mass 0.98g.
Learn more about density at: https://brainly.com/question/406690
